Gasilsko vozilo

Mercedes-Benz 809 fire ladder truck

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B Redpfx Agew Sy T He Tjp POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: rabljeno, Število vreten: 10 kos. Delovna širina: 230 mm Višina skobljanja: 160 mm Motor podajalnika: 5,5 kW Podajalna hitrost: 6-36 m/min. Stružno-kalibracijski avtomat Weinig Unimat 23EL za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom za samodejno nastavitev ter utornim ležiščem za kratke in ukrivljene obdelovance ter z dolgo ravnalno mizo. Vreteno 1: spodaj / 5,5 kW / 40 mm Vreteno 2: desno / 11 kW / 40 mm Redpfsw H Iv Tox Ag Tep Vreteno 3: levo / motor skupaj z vretenom 2 / 40 mm Vreteno 4: desno / 11 kW / 40 mm Vreteno 5: levo / 5,5 kW / 40 mm Vreteno 6: zgoraj / 11 kW / 40 mm Vreteno 7: spodaj / 11 kW / 40 mm Vreteno 8: zgoraj / 7,5 kW / 40 mm Vreteno 9: spodaj / 7,5 kW / 40 mm Vreteno 10: univerzalno / 4 kW / 40 mm

Stanje: rabljeno, Leto izdelave: 2004, WEINIG GRECON DOUBLE-END FINGER JOINT LINE MOD. PJ 150/500 - CE - USED Rsdpfx Agewry I Es Tep - Infeed wood length: 150 - 700 mm - Wood width: 40 - 150 mm - Wood thickness: 18 - 80 mm - Press length: 6100 mm - Pressing force: 120 kN - Milling motor: 15 kW - Scorer: 5.5 kW - Year: 2004 CE

Stanje: pripravljen za uporabo (rabljen), Panel length: 3200 mm, panel width: 1000 mm, max. workpiece thickness: 38 mm, min. infeed length: 500 mm. Rsdpfom Habdox Ag Tjp

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 450 mm, največja višina reza: 100 mm, največja širina rezanja: 245 mm, delovna višina: 100 mm, vrsta vhodnega toka: trifazni, – Year of manufacture: 2001 – Optimization – Defect cutting (cut-to-length) – The machine is equipped with additional tables, enabling a maximum cutting length of up to 6500 mm (currently set to 3400 mm) – 8 cutting lists TECHNICAL PARAMETERS: – Max. cutting length: 6500 mm (currently 3400 mm) – Min. element length: 300 mm – Max. cutting height: 100 mm – Max. cutting width: 245 mm – Saw blade diameter: 450 mm – Motor power: 9 kW – Max. feed speed: 120 m/min – Acceleration: 10 m/s² – Length and value-based optimization – Pneumatic material hold-down Rsdswtzrhspfx Ag Top – Five ejectors – Intelligently controlled waste chute – Vario speed system – Total length: 17,500 mm – Transport dimensions (L/W/H): 800 / 245 / 220 cm – Weight: 3,500 kg

Stanje: dober (rabljeno), Leto izdelave: 2006, Prodajam avtomatsko pnevmatsko žago Weinig Grecon Dimter Opticut 200 Elite, letnik 2006. Moč motorja: 7,5 kW Avtomatska vhodna miza 4,10 m (pretočni sistem) Avtomatska izhodna miza 6 izmetalnikov na desni izhodni mizi. Optimizacija z avtomatskim zaznavanjem napak in avtomatskim programiranjem rezalnih shem. Na voljo takoj. Redpfx Agjxtxi Ie Top CE oprema. Dokumenti vključeni.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, maximum cutting width 310 mm, chain width 340 mm, engine power 30 kW Rsdpfjwyagdjx Ag Tjp

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 183,87 kW (249,99 KM), vrsta goriva: dizel, konfiguracija osi: 4x2, vrsta prenosa: polavtomatski, emisijski razred: Euro 6, Leto izdelave: 2025, Oprema: airbag, kabelska vitla, zapora diferenciala, From our immediately available stock of new vehicles, we offer you: MLF/TLF 2500 Crew (Staffel) on MAN TGL 12.250 4x2 Our MLF on MAN TGL meets many demands. In addition to a crew compartment and generous storage space for equipment, it also carries a substantial amount of water. This allows you to commence firefighting operations without delay. Chassis: • MAN TGL 12.250 4x2 EURO 6 with 250 HP (184 kW) • Automated transmission • Differential lock • Twin tires on rear axle for maximum stability • Front-mounted winch (optional) Cab: • Standard crew cab (1+5 configuration) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Four SCBA (self-contained breathing apparatus) holders in the crew compartment as standard Bodywork: • High-quality frame construction made from rust- and corrosion-free materials Rodpfx Aoxn T Uzjg Top • Fold-out steps for each side equipment compartment • Custom stainless steel equipment storage, tailored to your specifications • Walkable, non-slip roof • Spacious roof box Vehicle Pump / Extinguishing Agent Tank: • Maintenance-free combined normal/high-pressure pump FPN 2000-10 • PUMP&ROLL capable • Capacity: 2,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely adjustable foam proportioning system • 2,500 l water tank with integrated 250 l foam agent tank • Auxiliary heater in pump compartment Firefighting Equipment: • High-pressure rapid attack system with 50 m durable hose • Foam/water monitor with 2,000 l/min output mounted on the vehicle roof • Self-protection system with 4 spray nozzles in front of the wheels Safety and Lighting: • LED lightbar on the cab roof / 2 LED front flashers • Pneumatic special signaling system (Martin horn) • 100 W PA system with announcement unit • Reversing camera • Comprehensive LED lighting in the crew and all equipment compartments • LED perimeter lighting on the body and additional spotlight • Pneumatic LED light mast with remote control • Rear warning device • Hygiene board (optional) We will be happy to provide you with a customized quotation and present the vehicle to you in detail at our Berlin location. All information is provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement is for informational purposes only and does not constitute a binding offer. Subject to prior sale!

Stanje: zelo dobro (rabljeno), 4-sided DOUBLE END PROFILER LINE, currently configured for INTERIOR DOORS, Rjdpfx Agewzmbqe Tsp Consisting of the following machines: X10023A) CELASCHI powered roller conveyor for infeed X10023B) CELASCHI DOUBLE END PROFILER Model TSA 3 B 480 A Installed total power: 65 kW X10023C) CELASCHI 90° transfer (L-shaped powered roller conveyors) X10023D) CELASCHI DOUBLE END PROFILER Model TSA 2 B 360 Installed total power: 65 kW

Stanje: rabljeno, Leto izdelave: 2000, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Infeed table length: 2500 + 500 mm Feed motor: 3 kW Feed speed: 6-36 m/min 1 WEINIG Planing and Moulding Machine Unimat 23 E 6 spindles (2 x right), powerful motors, EM 11 infeed magazine optional Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle bottom: 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 125 - 180 mm Rabbeting device incl. tool Hardened table insert before 1st bottom spindle 2nd spindle right: 11.0 kW ----- Common motor with left vertical spindle Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112-250 mm Rsdjwqr Rvepfx Ag Tep Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle left ----- Common motor with 2nd spindle Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112-200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe before left spindle, incl. side spring-loaded pressure roller 4th spindle right: 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112-250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle top: 11.0 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112-200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe prior to top spindle, adjustable to tool diameter and swing-away, spring-loaded. 6th spindle bottom: 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112-250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm General spindle information ----- All moulder spindles with high concentricity accuracy. Lubrication points for axial spindle movement. Vertical spindle length: 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed steplessly adjustable 6 - 36 m/min Infeed roller before 1st bottom tool, pneumatically controlled (up/down) Durofer pointed tooth rollers (Weinig Patent) with depth limiter, self-cleaning Feed roller adjustment opposite left spindle, axial 35 mm Extension of pendulum axis opposite left spindles to 150 mm Machine electrics ----- Operating voltage: 380-400-415 volts, 50 Hz Machine base, tables and fences ----- Surfacing table 2.5 m long (incl. jointer fence) Aluminum extension 0.5 m for surfacing table, incl. jointer fence extension Manual Waxilit pump for table resin removal One powered rubber roller (spring-loaded in outfeed table) Pressure elements and guides ----- Top pressure rollers, pneumatically operated Top pressure rollers can be swung away, opposite right spindles for easy tool change Machine operation ----- Pressure shoe before top spindle with mechanical digital display Outfeed after top spindle with mechanical digital display ATS/E system, automatic 2-axis positioning for spindle no. 3 and 4 Min. working height 12 mm Electric height adjustment of top spindles and feed Central location of lubrication points on machine front Safety and noise...