Tračna žaga

MEP - Vollautomat SHARK 331-1 NC 5.0 Spider

Stanje: dober (rabljeno), Leto izdelave: 2014, Cutting range 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Duedpfozkbn Ujx Abgjw Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2.0 mm Minimum cutting diameter 5.0 mm Band speed 15 - 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Control MEP CNC Total power requirement 2.2 kW Weight 1240 kg Dimensions L-W-H 1800 x 1900 x 1750 mm Current new price approx. EUR 23,000 Special price on request Equipment: - Heavy-duty electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 control and 7” touch screen display * Simple and quick adjustment of all machine parameters * With additional soft keys + backlit display * 10 programs, each with a max. of 9999 pieces and max. 9999.9 mm length - Material feed with stepper motor via ball screw * Single stroke 600 mm, repeatable for any length * Accuracy of ± 0.1/600 mm - Feeder with protective cover and safety limit switch - Precise setting of the cutting feed, indicated in mm/min - Positioning of saw head and movement of feeder via joystick - Automatic detection of cut start - Large, adjustable cast steel guide wheels - Saw band tensioning with tension control and display indication - Carbide band guides for highest cutting precision - Automatic monitoring of cutting load - Quick-action vice * With replaceable clamping and stop jaws - Large, side pull-out chip tray and coolant tank * Fitted with 2 electric pumps for band lubrication and cooling * Coolant gun for machine cleaning - Swarf removal brush for cleaning the saw band - Operating manual in German Manufacturer’s information: If this saw is installed in a network with a residual current circuit breaker (RCD), the breaker should be all-current sensitive and rated not less than 300 mA.

Stanje: rabljeno, Leto izdelave: 2001, Technical details: X-travel: 2500 mm Y-travel: 1000 mm Z-travel: 750 mm Table size: 3220 x 1000 mm Workpiece weight approx.: 3000 kg Spindle taper ISO: 50 Spindle speed range: 20 - 5000 rpm Feed rate: 1-30000 mm/min Rapid traverse: 30 m/min Total connected load: 40 kW Required space approx.: 6.9 x 4.1 x 3.7 m Machine weight approx.: 21 t Equipped with: Djdpfx Ajvptmwsbgeuw - CNC control HEIDENHAIN TNC 426 - 30-position automatic tool changer - RENISHAW probe - Coolant system with through-spindle coolant (IKZ) and chip conveyor - Various tool holders *

Stanje: dober (rabljeno), Leto izdelave: 2014, Območje reza 300 mm Območje reza pri 90 stopinjah: ploščato 330 x 260 mm Območje reza pri 90 stopinjah: kvadrat 260 x 260 mm Območje reza pri 45 stopinjah: okroglo 260 mm Območje reza pri 45 stopinjah: ploščato 270 x 200 mm Območje reza pri 45 stopinjah: kvadrat 250 mm Območje reza pri 60 stopinjah: okroglo 180 mm Območje reza pri 60 stopinjah: ploščato 170 x 170 mm Območje reza pri 60 stopinjah: kvadrat 180 mm Samodejni pomik 9999,9 mm Minimalni pomik 2,0 mm Minimalni premer reza 5,0 mm Hitrost tračnega lista 15–100 m/min Primež – odprtina 340 mm Dimenzije tračnega lista 3650 x 27 x 0,9 mm Upravljanje MEP CNC Skupna priključna moč 2,2 kW Teža 1240 kg Dimenzije D-Š-V 1800 x 1900 x 1750 mm v dobrem stanju (!!) trenutna nova cena cca. 23.000 € posebna cena na zahtevo Duedjzc Rv Hjpfx Abgsw Oprema: - robusten elektro-hidravlični avtomatski tračni žagalni stroj (INDUSTRIJSKI) - dodatna polavtomatska funkcija za reze od 0° do 60° levo - MEP 50 krmiljenje na osnovi sistema WINDOWS „CE“ s 7” zaslonom na dotik * enostavno in hitro nastavljanje vseh parametrov stroja * dodatne mehke tipke + osvetljen zaslon * 10 programov, vsak z maksimalno 9999 kosov in najv. dolžino 9999,9 mm - napredovanje materiala s koračnim motorjem prek krogličnega vretena * posamezni hod 600 mm, ponovljiv za poljubno dolžino reza * natančnost ± 0,1/600 mm - podajalnik z zaščitnim pokrovom in varnostno končno stikalo - natančna nastavitev hitrosti podajanja reza z navedbo v mm/min - pozicioniranje žagalne glave in premikanje podajalnika preko joysticka - samodejno prepoznavanje začetka reza - Velika, nastavljiva vodilna kolesa iz litega jekla - Napetost tračnega lista z nadzorom napetosti in prikazom na zaslonu - Vodiči tračnega lista iz karbida za najvišjo natančnost reza - Samodejni nadzor obremenitve med rezom - Primež s hitro nastavitvijo * z zamenljivimi prijemnimi in naslonskimi čeljustmi - Velik, stransko izvlečen zbiralnik ostružkov in rezervoar za hladilno tekočino * opremljen z 2 električnima črpalkama za mazanje in hlajenje tračnega lista * pištola za hladilno tekočino za čiščenje stroja - Krtača za odstranjevanje ostružkov iz tračnega lista - Navodila za uporabo v nemščini Podatek proizvajalca: Pri priključitvi tega stroja v omrežje z RCD zaščito (FI-sklopka) mora biti ta občutljiva na vse vrste toka (allstrom-senzitivna) in ne manjša od 300 mA.

Stanje: novo, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Dsdpfxoxaa Ewe Abgjuw Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 - 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Control MPE CNC Total power requirement 2.2 kW Weight 1240 kg Dimensions (LxWxH) 1800 x 1900 x 1750 mm Equipment/features: - Robust electro-hydraulic fully automatic bandsaw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – controller and 7” touch-screen display * Simple and fast adjustment of all machine parameters * With additional soft keys + backlit display * 10 programs, each with max. 9999 pieces and max. 9999.9 mm length - Material feed via stepper motor and ball screw spindle * Single stroke 600 mm, repeatable to cut any length * Accuracy of ± 0.1/600 mm - Feeder with safety cover and safety limit switch - Precise adjustment of cutting feed, indicated in mm/min - Saw head positioning and feeder movement via joystick - Automatic detection of cutting start - Large, adjustable cast steel band wheels - Saw blade tension with tension monitoring and display - Carbide blade guides for highest cutting precision - Automatic monitoring of cutting load - Vice with quick adjustment * With exchangeable clamping and stop jaws - Large, side-removable chip tray and coolant tank * With 2 electric pumps for blade lubrication and cooling * Coolant gun for machine cleaning - Chip removal brush for blade cleaning - Operating manual in German Manufacturer note - please note: When installing this saw in a network with residual-current circuit breaker (RCD) it must be all-current sensitive (TYPE B) and not less than 300 mA.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, potovalna razdalja osi X: 200 mm, pomik osi Y: 150 mm, pomik po osi Z: 250 mm, proizvajalec krmilnikov: EMCO, skupna višina: 1.100 mm, obremenitev mize: 10 kg, skupna masa: 400 kg, največja hitrost vretena: 5.000 obr/min, moč vretenovega motorja: 1.100 W, teža orodja: 700 g, največja dolžina izdelka: 1.135 mm, število osi: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5,000 rpm and a spindle motor power of 1.1 kW, enabling efficient machining operations. The machine offers a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking for a high-quality milling machine, we recommend considering the EMCO Concept Mill 105 vertical machining center that we have for sale. Please contact us for further details. • Distance spindle nose to table: 95-245 mm • Table size: 420 × 125 mm • T-slots: 2 × 11 × 90 mm • Maximum spindle torque: 4.2 Nm • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0-5 m/min • Maximum feed force X/Y: 2000 N • Maximum feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm • Tool stations: 10 • Maximum tool diameter: 55 mm Duedpsyhcfkefx Abgsw • Maximum tool length: 50 mm • Tool change time (T1-T2-T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW • Required air pressure: 6 bar

Stanje: novo, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 - 100 m/min Vise 340 mm opening Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1240 kg Dimensions L-W-H 1800 x 1900 x 1750 mm Features: - Heavy-duty electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 control and 7” touch-screen display * Easy and fast setting of all machine parameters Dsdpsxabwhefx Abgeuw * With additional softkeys + backlit display * 10 programs, each with max. 9999 piece counting and max. 9999.9 mm length - Material feed with stepper motor via ball screw * Single stroke 600 mm repeatable to cut any length * Accuracy of ± 0.1/600 mm - Feeder with safety cover and safety limit switch - Precise adjustment of cutting feed, displayed in mm/min - Saw head positioning and feeder movement via joystick - Automatic detection of cut start - Large, adjustable cast steel band wheels - Saw blade tension with blade tension control and display indication - Carbide blade guides for highest cutting precision - Automatic monitoring of cutting load - Quick-acting vise * With interchangeable clamping and stop jaws - Large, side-sliding chip tray and coolant tank * Equipped with 2 electric pumps for blade lubrication and cooling * Coolant spray gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating manual in German Manufacturer information: When installing this saw on a network with a residual current circuit breaker (RCD), ensure this is all-current sensitive and rated not less than 300 mA. SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Rabljena avtomatska hidravlična tračna žaga za kovino MEP SHARK 332 NC EVO Dimenzije lista: 3320x27x0,9mm Dusdoul Svlepfx Abgow Kot reza: od 45° do +60° Načini delovanja: ročni, polavtomatski-dinamični, polavtomatski, avtomatski Rezalna hitrost: 15-100m/min (inverter) Kapaciteta reza: pri 0° - okroglo 300mm - kvadrat 260mm - pravokotnik 330x260mm Dimenzije: 2600x2320x2000mm Leto izdelave: 2011 Teža: 1050kg Stroj je v celoti obnovljen in testiran.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 13,8 kW (18,76 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, kapaciteta rezervoarja za gorivo: 24 l, barva: rumena, skupna masa: 2.448 kg, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, število sedežev: 1, emisijski razred: Euro 5, Leto izdelave: 2026, obratovalne ure: 1 h, Oprema: dodatne luči, hidravlika, kabina, nagibni voziček, === MAIN SPECIFICATIONS === Year of manufacture: 2026 Operating hours: 1.8 h Operating weight: 2,448 kg Transport weight: 2,306 kg Max. digging depth: 2,523 mm Digging reach: 4,334 mm Engine manufacturer: Yanmar Engine type: Yanmar 3TNV76 Engine output: 13.8 kW Dusdpfx Abezadtaegew Drive: Diesel Machine type: Crawler mini excavator with conventional tail Hydraulic functions: VDS Vertical Digging System, offset boom, and dozer blade Cab: Enclosed cab Cab equipment: Heating / ventilation Travel speed: 4 km/h Tracks: Rubber tracks Track width: 250 mm Emission standard: Stage V CE certification: Yes === HIGHLIGHTS === Brand new and unused Wacker Neuson ET24 VDS mini excavator, year 2026 Only 1.8 delivery / test hours Equipped with VDS Vertical Digging System for vertical excavation on slopes VDS compensates for machine inclination and improves operator comfort on uneven terrain Compact machine width of 1,400 mm for easy access on tight job sites Powerful and efficient Yanmar Stage V diesel engine Enclosed cab with heating / ventilation Rubber tracks and dozer blade installed CE certified Manufactured in Austria === CONDITION === New and unused machine with only delivery / test hours. Clean original condition, ready for immediate use. Inspection available upon request. === LOCATION & PRICE === Location: Sittard, Netherlands. Worldwide delivery possible. Price on request (EXW / plus VAT). The Wacker Neuson ET24 VDS is a compact and versatile mini excavator, designed for efficient operations on construction sites, landscaping, and in confined work areas. This machine features the innovative VDS Vertical Digging System. The system allows the upper carriage to compensate for lateral tilt, enabling vertical digging even on slopes or uneven ground. This improves precision, comfort, and productivity in daily operation. With its compact width of 1,400 mm, low operating weight, and strong digging performance, the ET24 is easy to transport and ideally suited for inner-city construction sites, utility work, and general earthmoving applications. The machine is equipped with enclosed cab, heating / ventilation, rubber tracks, and dozer blade, and is powered by a reliable Yanmar Stage V diesel engine. CE certified and ready for immediate use. === DELIVERY === Crane loading possible on request for smooth transport. Flexible shipping options available depending on destination and logistics requirements. The entire transport process can be professionally organised by the logistics team of Collé Rental & Sales.

Stanje: dober (rabljeno), Leto izdelave: 2018, številka stroja/vozila: 68892, Offer 26014 Hydraulic Double-Column Guided Mitre Band Saw Automatic Technical Specifications: - Automatic operating cycle for the cutting process, hydraulic raising/lowering of the saw frame; manual mitre adjustment with hydraulic clamping - Automatic material feed unit, motorised mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Cutting speed, infinitely variable: 15 – 150 m/min - Cutting pressure regulation, stepless: 10 – 15 bar - Descent speed: 0 – 300 mm/min - Cutting range: 30° – 90° - at 90° round material: 335 mm - square/flat: 500 x 335 mm - at 45° round material: 330 mm - square, upright: 320 x 335 mm - at 30° square, upright: 170 x 335 mm - Automatic material feed unit - Discharge roller conveyor: 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 6.5 kW - Required space: approx. W 2300 x H 1750 x D 2200 mm Duodpfx Absytn Disgow - Weight: approx. 1,800 kg

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: HB 2022-A-073, stiskalna sila: 300 t, Portal Straightening Press – Manufacturer: Hidrobrasil – 300 t Gantry Press – Table 2,500 × 1,600 mm For sale is a high-performance portal straightening press from Hidrobrasil with a press force of 300 t. The machine features a movable bridge construction, a laterally movable cylinder, as well as a robust grid table design, making it ideal for precise straightening, assembly, and heavy-duty applications. ==== Technical Specifications & Information: Portal Straightening Press Hidrobrasil – 300 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry Press / Double-column press - Press force: 300 t (3,000 kN) - Machine weight: approx. 22 t - Dimensions (L × W × H): 4,500 × 2,300 × 3,700 mm ==== Working Area - Table size: 2,500 × 1,600 mm - Open height: 700 mm - Stroke: 700 mm - Table height: approx. 900 mm ==== Construction & Equipment - Movable bridge via rack and pinion with two gear motors - Cylinder laterally movable via rack and pinion - Table in grid construction - T-slots according to customer specification (standard: 22 mm) - Induction-hardened cylinder - Machine body double-coated - Lubrication via grease nipples - Operation via swivel arm on the bridge Dujdpfx Abjh Agnujgjw - Pressure setting via monitor (50 – 300 t) - Oil temperature display on the tank ==== Forces & Accuracy - Free tearing force: 500 kN - Pressure accuracy: ± 5 bar - Deflection: ≤ 0.8 mm/m (at 70% load) - Pressure build-up time: max. 3 s (steel on steel) ==== Speeds - Pressing speed: approx. 8 mm/s - Fast stroke (closing): 17 mm/s - Opening speed: up to 55 mm/s ==== Hydraulics - Main pump: Bosch Rexroth, approx. 93 l/min - Operating pressure: max. 350 bar - Oil volume: approx. 900 l (HLPD 46) - Ambient temperature: max. 45 °C - Oil temperature: max. 55 °C - Number of cylinders: 1 ==== Electrical Equipment - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Motor power: 22 kW (IE3) - Total connected load: approx. 30 kW ==== More Information - Thermal working range: 80 – 120 °C - Operating sides: 3 - Sound pressure level: max. 78 dB(A) - Minimum hall height: 5,000 mm ===== Straightening work, assembly work, heavy-duty machining, forming technology, steel construction, toolmaking, maintenance Gantry press, straightening press, double-column press, hydraulic press, industrial press, tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery guidelines and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they comply in all aspects with the national Brazilian safety regulation NR 12, which is based on these. Our greatest strength is special machine construction and press automation. We offer custom-made hydraulic presses at surprisingly competitive prices. For the hydraulics of the presses, we primarily use components from leading European manufacturers.