Več lopatic MEM 1MRF s centrirno napravo

MEM Maschinenbau 1mrf

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, approx. 4.5 m long feed and centering table drive via chain from feed motor centers the roundwood in the middle of the rotor debarking machine VK 26 4 main cutters 4 pre-cutters 30 kW main motor 11 kW feed unit Fgsdpfxsu Hmacj Aplsb non-driven outfeed table machine workshop inspected machine cleaned and newly painted

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, 1 overhauled Paul flitch separator, 2-lamella design, right: fixed lamella, left: movable lamella (for a left-hand machine) total length: 5.50 m total width: 850 mm roller pitch: 500 mm Fedpfotx A Sxsx Apljgb roller width: 790 mm for max. wood length: 5.00 m 8 driven spiral rollers and 3 driven smooth rollers. 11 rollers removed and fitted with new ball bearings. Movable lamella mounted on 4 ball-bearing-supported guides, easy to move, with new roller chain and 11 new return pulleys. Robust sheet metal lining between all rollers. As new condition.

Stanje: pripravljen za uporabo (rabljen), Linija za predelavo desk s sledečimi stroji: Ena dvorezna robilna žaga Ena enorezna vodoravna prerazžagalna žaga (horizontalni tračni razrez) Fgedpfx Apegwqk Selsb Transportni trakovi med stroji so vključeni.

Stanje: dober (rabljeno), Board Sorting Line / Sorting System / Length Sorting Line Esterer Fgjdpfx Apogw Scqsleb Right Discharge 5 Sorting Bins Total Length 26 Meters 1st Bin: 2 Meters 2nd Bin: 3 Meters 3rd Bin: 4 Meters 4th Bin: 5 Meters 5th Bin: >5 Meters Good condition – immediately available Location: Germany, near Landau an der Isar Please also see my other listings. I look forward to your inquiry.

Stanje: delavnici obnovljeno (rabljeno), VK 450 Odkorňovačka byla kompletně repasována. Fodpoq Hr N Ijfx Aplegb

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Cambio 500 debarking system consisting of: Infeed centering device. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Fodpfx Ajwxdimsplogb Drive motor 55 kW. Feed motor 11 kW. Feed speed 80 m/min. Hydraulic rotor and feed rollers. Outfeed control unit. Tilting bin for long timber. Spare parts.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Prodaja po naročilu stranke. Leta 2008 popolnoma obnovljeno in dobavljeno z naše strani, uporabljeno do leta 2024. Tovarniško nov rotor AirTen, uporabljen le kratek čas. Vključuje različne rezervne dele in popolno dokumentacijo. Vključuje dovodni in izhodni transporter ter ogrodje. Fodoxnz Rkepfx Aplegb

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Fgedpev Si Szefx Apljb Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 108111, Funkcionalnost: popolnoma funkcionalen, delovna širina: 240 mm, višina skobljanja: 160 mm, delovna višina: 180 mm, Four-side planer after service inspection, machine weight 3,900 kg Fsdpfxjvrq U Ds Aplogb

Stanje: zelo dobro (rabljeno), TECNI-ARMENTIA CH-70 Edger – hydraulic control – programmable cutting width – storage for up to 12 programs – centering feed table TECHNICAL SPECIFICATIONS: maximum cutting width: 700 mm maximum cutting height: 130 mm main motor power: 55 kW maximum material width: 830 mm length of fixed sleeve: 300 mm length of movable sleeve: 100 mm minimum material length: 700 mm spindle diameter: 65 mm sleeve diameter: 85 mm disk diameter: 350 – 400 mm feed speed hydraulically adjustable, stepless maximum feed speed: up to 38 m/min infeed table length: 2700 mm roller width: 700 mm roller diameter: 140 mm centering infeed table 2 lasers pump motor power: 4 kW Fedpeidmptefx Aplsgb anti-kickback pawl row three upper feed rollers three lower feed rollers hydraulic hold-down hydraulic height adjustment dimensions (L/W/H): 480 / 200 / 230 cm weight: 4000 kg