Stroj za upogibanje profilov in obročev

MEGEY PK 35

Stanje: rabljeno, Leto izdelave: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 hollow roof tooth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement reading for: - Horizontal cuts: via scale and strip cutting stop Fedpfxowka Nts Abtsgc - Vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Torsion-free, freestanding machine frame Pneumatically retractable slatted frame Round bar guides vertical and horizontal Fine-adjustable flip stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-slot nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Switchgear unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the flip stop Automatically swiveling saw head Location: Flörsheim Availability: short notice

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 302340, Ring bending machine Manufacturer: KB, Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Fedpfx Abjd S Uf Sotogc Bending capacity: - Round tube up to 48 x 3.0 mm - Flat bar (upright) 50 x 10 mm - Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3-phase.

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feed rollers: 2+2 Sheet thickness - min.: 0.4 mm Fodpfx Aecxxx Robtegc Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, potovalna razdalja osi X: 2.100 mm, pomik osi Y: 3.050 mm, pomik po osi Z: 400 mm, število osi: 4, moč vretenovega motorja: 9.000 W, Cette CNC 4 axes QUICK UA 481 a été fabriquée en 2024. Elle dispose d’une zone de travail de 2100 x 3050 x 400 mm, d’une broche HSD/HSK F 63 de 9 kW, ainsi que d’une table à vide double couche avec 6 zones. Équipée d’un servomoteur Yaskawa et de deux pompes Becker de 250 m³/h chacune, elle est parfaitement adaptée aux travaux avancés de menuiserie. Profitez de l’opportunité d’acquérir ce centre d’usinage QUICK CNC UA 481. Contactez-nous pour plus d’informations sur cette machine. • État : neuf • Alimentation : 380 V, triphasé • Broche : HSD, 9 kW, HSK F63 Fsdpjx E Efvsfx Abtsgc • Commande : NC Studio (interface en allemand) • Changeur d’outils : linéaire, 10 outils • entraînements : servomoteurs Yaskawa • Table : table à vide double couche, 6 zones Équipement additionnel • Système de vide : 2 pompes à vide Becker, 250 m³/h chacune

Stanje: novo, Sheet thickness 1.2 mm Fgodpofv H Edsfx Abtec Roller diameter 62 mm Throat depth 100 mm Total power requirement 0.75 kW Machine weight approx. 130 kg Space requirement approx. 1.1 x 0.5 x 1.3 m Machine is equipped with: - Emergency stop switch - Foot pedal - 7 sets of rollers

Stanje: novo, Leto izdelave: 2025, Ring Bending Machine, Manufacturer: Zopf, Model: ZB 70/2 M - Two driven rollers - Dual adjustment of the upper roller - Operation possible in both horizontal and vertical positions - Shafts supported by tapered roller bearings - Use of interchangeable slide rails on the guide carriage - Roller diameters: 152/162 mm - Shaft diameter: 40 mm - Shaft speed: 8.5 rpm - Drive motor: 1.1 kW - Bending capacity: up to 60x10 mm (vertical orientation) - Round tube up to 80x2 mm - Angle iron up to 50x50x5 mm - Solid material up to 35 mm - Weight: 400 kg Fgsdpfxet Hwfne Abtoc

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: Fedpjng Amkefx Abtjgc • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, premer gredi: 50 mm, premer valja: 155 mm, skupna masa: 400 kg, moč: 1,5 kW (2,04 KM), vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, nujno zaustavitev, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Power capacity (kW): 1.5 Voltage: 400 V Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Fgsdjwt Sy Ajpfx Abtec Weight (kg) approx.: 400 Units in stock: 4 Manufactured in: Turkey Maximum diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units available in stock, foot pedal included.

Stanje: novo, Balkaya Profile Ring Bending Machine HBM 80 Technical Specifications: Tool mount, shaft diameter: 80 mm Tool diameter: 245 mm Working speed: 4.5 m/min Motor: 4 kW Hydraulics: 30 t Dimensions (LxWxH): 1450 x 1050 x 1800 mm Weight: 1,400 kg 3 driven rollers Hardened standard rollers Hardened and ground tool mount, shaft Mobile control panel Horizontal and vertical operating positions Digital display Fsdpfxsh T Ulno Abtjgc Compliant with CE standards

Stanje: novo, Tubend Hydraulic Profile Ring Bending Machine HPK 50 3 driven rollers Digital display Includes standard roller set for steel Fgjdpfx Asum R U Ajbtsc Hydraulic / motorized ring bending machine Usable horizontally and vertically with 3 driven rollers All 3 rollers motor-driven Top roller adjustment is hydraulic Hydraulics: 8 tons Rollers are hardened Left/right rotation via foot pedal Mounting: shaft 50 mm Roller diameter: 162 mm Speed: 4.5 m/min Motor power: 1.1 kW Electrical connection: 400 V According to CE standards Weight: 510 kg Dimensions (LxWxH): 810 x 950 x 1500 mm Performance table: see PDF file