Horizontalni strojni center

Mazak H415

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 10 - Number of Spindles: 2 MAIN SPINDLE - Max. Bar Diameter: 16 mm - Max. Machinable Length: 184 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° SUB SPINDLE - Max. Bar Diameter: 16 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° TOOL HOLDER 1 - Number of Positions: 5 - Number of Driven Positions: 3 Gjdpfx Ajuhhp Sjhmobn - Driven Tool Speed: 8,000 rpm TOOL HOLDER 2 - Number of Positions: 5 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm FRONT UNIT - Number of Positions: 4 - Number of Driven Positions: 4 - Driven Tool Speed: 8,000 rpm SUB MACHINING - Number of Positions: 6 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Power: 14 kVA MACHINE HOURS - Operating Hours: 54,035 h ACCESSORIES - Control: Fanuc PNC DECO - Driven tool drive at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Coolant tank * with high-pressure pump - Bar feeder: IEMCA GENIUS 118 / 32LL - Coolant container: MARKSA CSW 200 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified third party authorized by the buyer. - Number of driven tool holders: 3

Stanje: dober (rabljeno), Leto izdelave: 1990, 4-osni obdelovalni center Dimenzije mize: 1200 x 660 mm Gbsdpfx Aofbml Nehmen Pomiki osi: X 1050 mm, Y 650 mm, Z 660 mm Največja obremenitev mize: 1600 kg Hitrosti podajanja: 15.000 mm/min Orodniška menjava s 31 mesti, delno opremljena s BT 50 nosilci orodij 4. os (krmiljena): NIKKEN CNC 250, premer vpenjalne glave 250 mm Dimenzije (DxŠxV): približno 3000 x 5000 x 2900 mm Teža: približno 13.000 kg

Stanje: rabljeno, Leto izdelave: 1999, x-hod 4000 mm y-hod 1000 mm z-hod 1500 mm Gbodpfx Aoxzuz Nshmjn Krmilnik Heidenhain 355 Nosilnost 10 t Glava SK50 da Dodatne slike / video na voljo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, SFM Sunfirm CNC stružnica v dobrem delujočem stanju. Specifikacije: Premer struženja nad ležiščem: 1520 mm Premer struženja nad prečno sani: 1100 mm Premer struženja v izvlečeni coni: 1800 mm Razdalja med konicama: 3000 mm Število obratov: 6-500/min v 4 korakih Pomik Z-osi: 3300 mm Širina ležišča: 850 mm Krmiljenje FAGOR 8055 Revolverska glava z 8 mesti Moč motorja: 30/37 kW Pribor: 4-čeljustni vpenjalni tulec, 1400 mm Transporter za odrezke Revolverska glava z 8 mesti Fiksna luneta Gbodpfjw Uqf Ssx Ahmsn

Stanje: rabljeno, Leto izdelave: 2012, x-axis travel: 630 mm y-axis travel: 800 mm z-axis travel: 750 mm Control: SIN 840D sl Siemens B axis: 360 x 0.001° A axis: -200 to +25 x 0.001° Spindle speed – infinitely variable: 20 – 18,000 rpm Drive power 100% duty cycle: 28.00 kW Drive power 40% duty cycle: 34.00 kW Torque at 40% / 100% duty cycle: 110 / 84 Nm Tool holder: HSK 63 Feed rate X/Y/Z axis: 1 – 100,000 mm/min Rapid traverse X/Y/Z: 100.00 m/min Feed force X/Y/Z: 9 / 6 / 9 kN Godpfjvxwxvjx Ahmjbn B-axis feed: 1 – 14,400°/min A-axis feed: 1 – 7,200°/min Pallet size: 2x 500 x 500 mm Max. workpiece weight: 400 kg Max. workpiece diameter: 800 mm Max. workpiece height: 800 mm Tool magazine with 63 positions Max. tool diameter: 280 mm Max. tool length: 550 mm Max. tool weight: 15.00 kg Total connected load: 65.00 kW Machine weight approx.: 14.00 t Space requirements approx.: 5.50 x 3.50 x H3.20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage monitoring, and emulsion mist separator. Machine was integrated in a production line, therefore supplied without chip conveyor and without coolant system.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.500 mm, skupna dolžina: 4.500 mm, skupna višina: 3.200 mm, Offered is a double-spindle pick-up lathe EMAG VSC 250 DUO. There are 2 almost identical machines of this type available. Gedper Nc Ufofx Ahmsbn Each machine is equipped with 2 independent work spindles and 2 EMAG turrets. The machine is capable of either machining 2 identical workpieces with the same operation simultaneously, or producing one workpiece in two consecutive machining steps. The VSC 250 DUO will be completely overhauled before delivery and will receive a control system upgrade to Siemens Sinumerik ONE. If required, the machine can be equipped with further peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL Siemens Sinumerik One TECHNICAL DATA Workpiece diameter: max. 250 mm Workpiece height: max. 150 mm Chuck diameter: 250/315 mm Swing diameter: 350 mm X-axis travel: 745 mm Z-axis travel: 300 mm TOOL CARRIERS Work area 1: 1x EMAG disc turret, 12x VDI 50 stations, no driven tools Work area 2: 1x EMAG disc turret, 12x VDI 50 stations, with driven tools Price, delivery time, and machine configuration upon request.

Stanje: dober (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 4.230 mm, pomik osi Y: 1.950 mm, pomik po osi Z: 750 mm, dolžina mize: 4.000 mm, širina mize: 1.250 mm, obremenitev mize: 11.000 kg, CNC Gantry Milling Machine KAO MING - KMC 4000 SV-H Double linear guide and flat guideway design Automatic head changer for multi-sided machining of large components Automatic tool changer for horizontal and vertical milling heads, swiveling Distance spindle nose to table: 213–1093 mm Distance spindle center to table: 130–… mm Horizontal head indexing: 5° x 72 positions Heidenhain iTNC530 with HR410 handwheel Spindle torque: 1018 Nm, ISO 50 Universal milling head, Huron type X-axis travel: 4230 mm Y-axis travel: 1950 mm Z-axis travel: 750 mm Distance between columns: 1500 mm Table length: 4000 mm Gedpfxoxf E Twe Ahmebn Table width: 1250 mm Table load capacity: 11,000 kg X-axis feed rate: 12,000 mm/min Y-axis feed rate: 15,000 mm/min Z-axis feed rate: 12,000 mm/min Tool holder: 50 ISO/BT/MK Spindle power: 26 kW Spindle speed: 4,400 rpm Tool changer: 30 positions Chip conveyor: Yes Coolant system: Yes Length: 10,100 mm Width: 4,500 mm Height: 4,250 mm Weight: 30,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is presented in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute any representation or contractual terms. We recommend you verify all critical details.

Stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, CNC stružnica Gjdpfjumlwxjx Ahmsbn

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Discover our selection of robust and precise bed type milling machines! Are you looking for a reliable bed milling machine to boost your productivity? Experience unmatched precision and performance with our new and refurbished bed milling machines. Our machines offer X-axis travels from 1500–5000 mm and are available with Heidenhain or Siemens controls. With Y- and Z-axis travels up to 1200 mm, your machining possibilities are virtually limitless. A selection of our refurbished machines are in stock and available at short notice! Explore our comprehensive range of special accessories such as universal milling heads, tool changers, and much more to make your bed milling machine even more versatile. Whether you’re machining complex components or tackling demanding tasks, our machines deliver optimal results every time. Rely on our years of experience and let us help you optimize your machining processes. Invest in quality and precision—contact us today! Below is a selection of available machine types; upon request, we can also offer additional models or custom machines: MAIN TECHNICAL DATA: BFM series including BAFA funding of 15% or more! X travel 1500–5000 mm Y travel 1000 mm Z travel 950 (optionally 1500) mm Max. table load 5000 kg Spindle taper 50 SK Spindle speed 3500 (optional 5000) rpm Spindle drive 15/18.5 (optional 22/26) kW Gbsdpfxopwn Hhj Ahmen ACCESSORIES: manual universal head, Siemens or Heidenhain control, linear scales on X/Y/Z axes, chip conveyor (screw conveyor, front/rear), and much more. Extensive SPECIAL ACCESSORIES available on request to further enhance your machine’s productivity: CURRENTLY AVAILABLE REFURBISHED MACHINES with warranty and BAFA funding, e.g. - CORREA CF17D: HEIDENHAIN TNC-426, travels (X/Y/Z): 2000 / 800 / 800 mm, manual milling head, etc. - CORREA CF25/25: HEIDENHAIN TNC-530, travels (X/Y/Z): 2500 / 1000 / 1500 mm, automatic universal head UAD (every 0.1º) / 6,000 rpm, etc. - CORREA CF25/25: HEIDENHAIN TNC-426, travels (X/Y/Z): 2500 / 1000 / 1000 mm, automatic indexing differential head UAD (every 0.1º) / 6,000 rpm, automatic tool changer (30 tools), etc. - CORREA PRISMA: HEIDENHAIN TNC-530, travels (X/Y/Z): 2500 / 1000 / 1000 mm, automatic indexing milling head UDG40 (every 2.5º), etc. - CORREA CF22/25: HEIDENHAIN TNC-426, travels (X/Y/Z): 2500 / 800 / 800 mm, manual milling head, etc. - NICOLAS CORREA A30/30: HEIDENHAIN TNC-426, travels (X/Y/Z): 3000 / 1200 / 1000 mm, extended manual milling head (UL40), etc. - CORREA A30/30: HEIDENHAIN TNC-426, travels (X/Y/Z): 3000 / 1200 / 1000 mm, universal milling head with automatic indexing UDG (every 2.5º), automatic tool changer (ATC30), etc. Additional models in stock or available at short notice. Contact us now and discover the world of innovative bed type milling technology! Our services for you: • On-site consultation and solution development • Organization of machine transportation to your facility • Installation, commissioning, and turnkey handover • Financing and support with funding options via KFW, BAFA, and more.

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 850 mm, pomik osi Y: 550 mm, pomik po osi Z: 630 mm, CNC control Fanuc O-M 24-position tool changer Gjdpfx Aovfrdgjhmsbn electronic handwheel chip tray Technical data: X-axis travel: 850 mm Y-axis travel: 550 mm Z-axis travel: 630 mm Spindle taper: ISO40 Spindle speed: 8000 rpm Table clamping area: 1000 x 540 mm Number of tool changer positions: 24 Weight approx.: 5500 kg Technical data, accessories, and machine description are not binding.