Pletilni stroj

Mayer & Cie. MV4 ll rondbreimachine

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor Hedpfx Agsfz U S Ejxel The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Naprodaj: Generator pare: VEA mod. UNIVEX 25G H13 + sistem za pripravo vode in reverzno osmozo BWT Hedjucvi Njpfx Agxjl - Moč: 1325 kW - Zmogljivost: 2500 kg/h - Največji tlak: 13 bar - Obratovalna temperatura: 195°C - Gorilnik: WEISHAUPT (leto izdelave 2016) - Leto izdelave: 1999 - Popolna dokumentacija - Celovit, sodoben sistem za pripravo vode: BWT tag: Parni kotel, Generator pare, Industrijski kotel, Priprava vode, Oljni gorilnik, Parna instalacija, Energetska industrija, Avtomatski sistem

Stanje: novo, Leto izdelave: 2025, Genie GS1432m Micro E-Drive scissor lift, new, used, and demo units available Hsdpfxorictqs Agxel

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, For sale is a welding robot system with the following components: Hodpfx Asv Dvllogxsl - Elite Robot CS620 (1750 mm reach) with programming flange and software - Fronius TPSi 500 - rotateZERO 500 positioner with 1800 mm x 800 mm sub-frame - Machine frame The unit is immediately ready to weld.

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Hedpfx Ajd Nt Rqjgxsl Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Cell with FANUC Arc Mate 100iD welding robot Year of manufacture: 2019 Axes: 6 Reach: 1441 mm Payload: 12 kg Fanuc System R-30iB Plus robot controller and housing measuring 2 m x 2 m x 2.7 m (without Kemper extraction system) Hsdpfst Rwwrjx Agxsl

Stanje: rabljeno, Kompleti valjev za profilno upogibalko, 3-valjna obročna upogibalka HERKULES WETZLAR Hjdpfeglaq Iex Agxol Valji so primerni za profilno upogibalko HERKULES WETZLAR tip BO 238 N Premer osi: 60 mm z 18 mm utornico 2 kosa valjev komplet št. 1, premer valja = 110 mm, širina valja = 180 mm 2 kosa valjev komplet št. 2, premer valja = 160 mm, širina valja = 40 mm 3 kosi valjev komplet št. 3, premer valja = 150 mm, za premer cevi Ø 33 mm, širina valja 87 / 115 mm - Komplet št. 3 z adapter obročem iz Ø 93 na Ø 60 mm brez utornice Stroj je imel 2 gnana valja Teža vseh valjev 57 kg dobro stanje

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, premer gredi: 50 mm, premer valja: 155 mm, skupna masa: 400 kg, moč: 1,5 kW (2,04 KM), vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, nujno zaustavitev, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Power capacity (kW): 1.5 Voltage: 400 V Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (kg) approx.: 400 Units in stock: 4 Manufactured in: Turkey Hjdpfowt Sy Aex Agxol Maximum diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units available in stock, foot pedal included.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 10 h, Including: Special iron bending tool ATRC 18 Special ornamental bending tool ATAR 305 Helical bending device ATSC Demonstration machine, less than 10 hours of operation! Hsdjt Akxaepfx Agxsl TECHNICAL DATA Shaft diameter: 30 mm Roller diameter: 128 mm Roller speed (rpm): 8.5 - 17 Drive motor: 0.75 kW Main switch with trip coil and built-in emergency stop (CP30 - CP30 R) - Reversing gearbox and dual-speed selector mounted on a separate control panel (CP30 - CP30 R) - Foot pedal for rotation control (L/R) with built-in emergency stop (CP30 PR) - Two-speed selector (CP30 PR) - Mechanical adjustment of the upper roller with digital position display - Two traction rollers with knurled surface - Machine inner frame made of steel - Shafts made of hardened and ground, high-strength steel - Gear wheels made of special steel with ground teeth - Rollers made of special steel, hardness 59/60 HRC - Outer cover in ABS - Working position: horizontal (CP30) - Working positions: horizontal and vertical (CP30 R - CP30 PR) Weight: CP 30 PR: 240 kg External dimensions (mm): CP30 PR Base: 680 x 800 – Height: 825 ACCESSORIES Guide rollers, 2-way Universal rollers (standard) Operating key Operating manual

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Zum Verkauf stehen: Hodpfx Agsv Hxltjxjl Mehrere (6 Stück) Jakob Müller MVC 150 der ersten Generation: MVC 150 8/46mm Bj. 1988 88.60237 Nr. 309 MVC 150 8/46mm Bj. 1988 88.60085 Nr. 319 MVC 150 8/46mm Bj. 1988 88.60319 Nr. 332 MVC 150 10/36mm Bj. 1988 88.60041C Nr. 314 MVC 150 10/36mm Bj. 1988 88.60041B Nr. 313 MVC 150 6/66mm Bj. 1988 88.60000 Nr. 307 Baujahr: 1988 Zustand: gut laufend und komplett Preis: 3.900,- Euro