Pripni rezila

MAX Striffler 2766

Stanje: dober (rabljeno), Leto izdelave: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating Principle Processing of construction timber for chalet construction / log house manufacturing The beams can be processed in a single pass • Cutting to length • Horizontal and vertical milling of tenons / grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Robust welded construction design. Machine (horizontal and vertical milling unit) with 4 special milling motors, equipped with hardened and ground guides for maximum machining precision. Carriage guided by dust-protected and preloaded ball bearing rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control, motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tools (rebate heads). With hydro-pneumatic horizontal and vertical feed, electrically controlled, operating together with spindle motor start-up. Rapid traverse and feed are steplessly adjustable. Fully wired and installed, including air maintenance unit. Beams with a thickness of more than 14 cm must be processed in two clamping steps. Such beams must be repositioned for re-milling to account for the excess thickness. Safety covers over moving parts with gas strut weight compensation. Machine Description / Equipped with: 1. Saw Unit: Manual feed Spindle adjustment with analog scale display Saw blade Ø max. / Bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (same direction of rotation) Adjustable riving knife Motor speed: min⁻¹ 2900 Power kW: 2.2 2. CM Milling Unit (Log House Unit) Hydro-pneumatic feed Spindle adjustment with digital scale display Horizontal milling unit Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter widths above 60 mm, only cutters made from aluminum alloy with indexable inserts are to be used 2 motors, hydro-pneumatic feed, each 2.2 kW Hydro-pneumatic feed Rapid traverse and feed speed steplessly adjustable 3. Drilling Unit: Manual feed Spindle adjustment with analog scale display Drill holder: Collet ER 25 Nedpfeu Uh T Dex Abzsli Clamping Ø max.: 16 mm Drill Ø max.: 32 mm Motor: min⁻¹ 1450, 1.8 kW 4. End Milling Unit Hydro-pneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor: min⁻¹ 2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics On-site operating pressure min/max. MPa (bar): 0.7 / 1 (7 / 10) Air consumption Nm³/h: 8 Electrics Operating voltage V / Hz: 380, 50 Rated power kW: 8.8 - 15.8, depending on configuration Required on-site fuse: A 3 x 25 slow-blow Maximum simultaneous power in use: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Overall height (guard down): 1600 mm Overall height (guard up): 2200 mm Extraction connection Ø (floor extraction): Weight approx.: 1300 kg Incl. roller conveyor 2 x 6 m (2 x 4 m) Technical specifications subject to change!

Leto izdelave: 2018, Stanje: kot nova (razstavni stroj), Mitre saw with a 600 mm saw blade diameter (optional 800 mm) - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (clamping cylinder height and tilt angle steplessly adjustable) - Two-hand safety control Nedpfjd Rhzwjx Abzoli Options available: - Automatic mitre adjustment - Roller conveyor with length stop or positioning system - Sawing machine version - Preloading magazine - Horizontal clamping device - Extraction system - Further accessories on request We would be pleased to provide you with a tailored quotation according to your requirements. The machine can be inspected and tested in 56812.

Stanje: dober (rabljeno), največja višina reza: 200 mm, širina verige: 400 mm, vhodna napetost: 380 V, vrsta nastavitve višine: električni, največja hitrost vrtenja: 3.400 obr/min, moč: 37 kW (50,31 KM), Največja delovna višina: 200 mm Širina verige: 400 mm Največja razdalja med zunanjimi rezili: 380 mm Premer rezil (min/maks): 250 / 350 mm Nastavljiva hitrost podajanja (inverter): 5 – 30 m/min Minimalna dolžina obdelovanca: 1000 mm Premer nosilca rezila: 70 mm Hitrost vrtenja nosilca rezila: 3.400 obr/min Njdpfx Abjtvpfmjzoli Moč motorjev: 2 x 37 kW

Stanje: novo, Leto izdelave: 2024, Mitre saw with a saw blade diameter of 600mm (optionally 800mm) - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and tilt angle of the clamping cylinders are continuously adjustable) - Two-hand safety control Nlsdpjd Rhzijfx Abzoi Optional available: - Automatic mitre adjustment - Roller conveyor with length stop or positioning system - Version as fully automatic saw - Pre-loading magazine - Horizontal clamping device - Extraction system - Additional accessories on request We will be happy to provide you with a customised offer tailored to your requirements. The machine can be inspected and tested at 56812.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 278 h, Max. workpiece size for re-milling X = 3620 mm; Maximum travel distances: X = 3865 mm Minimum room height 3.20 m Machining in Y and Z Y = 1600 mm; Max. panel width 2000 mm Maximum workpiece height 300 mm (measured from upper edge of vacuum suction cup 125 mm) MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured by dongle for the machine CabinetControl Base: Software for furniture design and production CAMPUS V7 PLUS: Software for CNC processing centers ADDITIONAL MODULE HIGH-SPEED MILLING Control Siemens industrial PC control Handheld controller for remote operation of the machine MILLING HEAD 5-axis head 7840, power: 12 kW n(max.) = 0–24,000 rpm, infinitely variable Gimbaled; C-axis +/- 360° rotatable, A-axis +/- 180° rotatable Liquid cooling (cooling unit included) with HSK-F 63 tool holder Max. tool weight: 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster to increase standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles, individually selectable Nljdpfx Abexfaf Ujzji L-shaped arrangement, 11+2 in X, 6 in Y direction, 32 mm pitch n (max.) 1,000–5,710 rpm, infinitely variable 6 horizontal spindles 2 double drill spindles in X direction 1 double drill spindle in Y direction including saw unit Integrated saw unit for sawing/grooving in X direction n(max.) 1,000–7,330 rpm, infinitely variable MACHINE TABLE Machine table: 6 consoles, pneumatically clamped, movable in X direction Display and assignment of consoles and suction cups in the software 2 side stops field A and D, 2 large-area buttons for clamping and releasing workpieces, 2 tape measure displays for positioning the consoles in X, referenced to stop field A/D, tape measure displays for suction cups on each console in Y, referenced to the rear stop STOPS 2 additional machining fields in front for 6 consoles (4-field machining) 4 pneumatically controlled stops per field, including 1 stop per console and one side stop in X direction per field FEEDING AIDS 4 pneumatically liftable and lowerable feeding aids for easy handling of heavy parts TOOL CHANGER Tool changer 7996, 18-position magazine (carousel) travels automatically in X direction Traveling tool changer 7886, 1-position saw blade magazine Specially designed for large saw blade diameters up to 350 mm Pick-up system installed on the gantry, pneumatic Max. tool Ø: 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running compressor LED light for the machining area. SAFETY OPTIONS Safety enclosure according to CE standard Protective fence on the side and rear CONFIGURATION VARIANTS AND ACCESSORIES LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field machining and large workpieces 2 controlled pneumatic modules for up to 5 frame clamping elements per field (A/D) Each module can control up to 5 frame clamping elements simultaneously. Simultaneous opening/closing of connected clamping elements; includes foot pedal for operation, max. 2 per field A and D can be ordered OPTIONAL: LASER – laser pointer, consisting of two laser pointers for positioning the vacuum suction cups.

Stanje: novo, Sheet width: 2050 mm Sheet thickness: 3 mm Frame gap: 2100 mm Backgauge – adjustable: 600 mm Connected load: kW Machine weight approx.: 1.1 t Dimensions (L x W x H): 2.7 x 2.1 x 1.4 m The machine operates quietly and, thanks to its geared motor with brake system, is energy efficient. Our machine is constructed as a monoblock body, welded from ST42 quality material. The machine’s blades are made from 2379 grade material, manufactured by BOHLER. These high-quality blades ensure precise cutting. Emergency stop button, foot switch, and finger protection grid are included as standard equipment. Nedpfx Abefv H Dkozoli (Documentation available in English only)

Leto izdelave: 1989, Stanje: zelo dobro (rabljeno), Saw blade diameter: 350 Njdpfx Aoff Snbebzeli

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Very good, well-maintained condition Nljdpfxsd Szf Ns Abzsi Saw blade diameter: 800 mm Sturdy steel tube base frame High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety controls Coolant system Protective cover Optional with length measuring system or automatic positioning system Available as a saw-drilling automatic machine or saw-punching automatic machine on request.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: SÇ 6000 CNC KÖŞE TEMİZLEME MAKİNASI, • Complies with CE standards • Semi-automatic CNC machine designed for cleaning the burrs formed after welding 90-degree PVC windows, sashes, door frames, and other profiles. • Independent cleaning of the bottom, top, and external surfaces of each profile • Touchscreen control panel • Easy memory storage function • User-adjustable processing speeds • User-friendly interface for programming profiles to be cleaned with dedicated software • NC control system with PLC unit Nljderbf R Tspfx Abzsi • Joystick for user control on the Y-Z axes • Capability for easy program creation and precise adjustments • Average process time per corner is 5-8 seconds • Ability to clean 400 - 500 frames during an average 8-hour shift • Unlimited program storage capacity • Daily and monthly production report display panel • Equipped with 2 servo motors and 1 Hertz motor • Ø200 mm diamond-toothed saw blade • Capable of making angles and radii on all PVC profiles, with circular interpolation movement • Profile support table with front brush system ensures smooth movement and prevents profile scratches during operation

Leto izdelave: 2004, Stanje: dober (rabljeno), številka stroja/vozila: 2004-3-11A, - Manual feed of the milling unit Nodpfef E Higsx Abzsli - Working table height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 250 mm - Max. milling height: 150 mm - Max. milling depth: 80 mm - Max. milling length: 305 mm - Angle-adjustable fence left & right: 20° – 90° - Spindle speed: 4,500 rpm - Drive: 400 V, 3.2 kW - Compressed air connection: 6 – 8 bar - Air consumption per work cycle: 10 l - Pneumatic profile clamping - Table base frame - Space requirement: approx. W 1,100 x H 1,300 x D 700 mm - Weight: approx. 200 kg