Obdelovalni Center

MASTERWOOD MW 21.31 KS

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 Features and technical specifications: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Chodpfx Ast Hagnsfqsf Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connection: 400 V +/- 5 % / 50 Hz Included: Press mechanism with feed cylinder, main cylinder, clamping cylinder Connection part for transport pipe Chromed clamping tongs Hydraulic tank 160 l with pump motor + valve control Oil temperature safety switch Base plate 1,040 x 1,040 mm with agitator + motor and screw conveyor discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control unit Briquette length monitoring Automatic end-position of all cylinders Manual control Automatic on/off with fill level limit switch Material: Planer shavings, wood shavings from solid wood, loose, clean and free from foreign matter* Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year * Specification of contaminants: Any material other than wood, wood pieces larger than 12 mm. Throughput capacity is highly dependent on material. Stated values are averages. Depending on mixing ratio, moisture content, and material properties! Application not or not fully specified/disclosed. Machine is sold appropriately and solution-oriented by a specialist dealer. If heat builds up due to blockages, operating time may be drastically reduced. Availability: short-term Stock location: Solingen

Stanje: skoraj kot novo (rabljeno), 2,000 m² Schäfer R3000 Mezzanine Platform, 2 Levels Used equipment, excellent condition, like new—see photos. Manufacturer: SCHÄFER R3000 CAD planning and assembly available. Price on request! Partial sale possible. Negotiation price: on request! Item is in stock and available immediately. Transport and assembly upon request. Inspection possible at any time by appointment. More information available upon request. Constantly over 5,000 running meters of pallet racks available from various manufacturers in stock. Chodefiqhmspfx Afqjf (Modifications and errors in technical data, specifications, and prices as well as prior sale reserved! See our T&Cs. All prices ex-works, excluding VAT.) Purchase / Sale: We are constantly looking for and offering numerous items from various sectors: - broom-clean facility clearances - business liquidations Quick, flexible, and efficient! We also clear or dispose for insolvency administrators. Write to us with a few keywords—we will get back to you promptly. To visit our page, please click on our logo!

Stanje: pripravljen za uporabo (rabljen), Fanuc 6-osni robotski rezkalni center za aluminij in jeklo. X-pomik robota: 10.500 mm. Podaljšan doseg robotske roke (levo in desno): 3.045 mm. Maksimalna dolžina obdelovanca pri profilih: 15 metrov. Največja velikost obdelovanca brez podaljšanega dosega: 10.500 x 3.045 mm. Največja višina obdelovanca: 3.500 mm. 13-pozicijski avtomatski menjalnik orodij: - 12 električnih orodij - 1 merilna sonda Rezkalna glava: - SK40 - 10 kW na vretenu / 12.000 ali 15.000 vrt/min - 7,5 kW na vretenu / 18.000 vrt/min - 4 kW na vretenu / 24.000 vrt/min - avtomatsko mazanje Chedsv Sfk Hjpfx Afqof Veliko je možnih konfiguracij, odvisno od vrste obdelovanca. Trenutno sta na voljo dve ločeni delovni območji, lahko pa jih združite v eno veliko območje (za obdelavo večjih kosov) ali jih razdelite na več manjših delovnih območij za manjše obdelovance.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč UniControl 12, letnik 2006, iz Norveške. - Za natančne tehnične specifikacije prosim odprite priloženi PDF dokument. Prečni prerez UniTec 12: - žagalna enota - rezkar za zaobljanje robov od spodaj - dvigovalno vreteno št. 1 - dvigovalno vreteno št. 2 - dvigovalno vreteno št. 3 Dolga, profilna sekcija UniVar 12: - profilni rezkar - profilni rezkar - profilni rezkar vodoravno - profilni rezkar - profilni rezkar - profilni rezkar Skupna električna moč 114 kW, 400 V AC Potrebna moč odsesavanja 270 m3/min Potrebni stisnjen zrak 1000 L/min Stroj je bil v uporabi do 15.08.2023 Plačilo: pred nakladom Chedomgc I Njpfx Afqef Dostava: ex tovarna Rendalen - Norveška Stroj se nahaja na Norveškem (v bližini Trondheima) Trenutno je stroj odklopljen, shranjen v suhem in toplem skladišču ter je pripravljen za pošiljanje. Rekman Maskin & Service - servis lesnoobdelovalnih strojev od 1986.

Leto izdelave: 2011, Stanje: skoraj kot novo (rabljeno), For sale is 1 roller conveyor, each including a geared motor: Technical Data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: Up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (further specifications see nameplate in the image) Chjdpfx Ajihpn Nofqof Three of the four roller tracks have a wooden sidewall along the entire length, and one roller track has a side wooden wall with a length of 5.20 m. Two of the four roller tracks are equipped with 3 lateral removal systems each. (see pictures)

Stanje: novo, Leto izdelave: 2025, Robland products are manufactured by Landuyt N.V., headquartered in Bruges, Belgium. BM-3000: • Grooving saw unit (maximum groove depth 10 mm) Chedsd Hz Niopfx Afqsf • Left drill bit 5 mm for creating row drill holes • 20 mm drill bit for the installation of Minifix systems • 8 mm milling cutter for limited drilling and milling applications • 35 mm drill bit for hinges • The panel thickness that can be processed is 12–40 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Y-axis range: Drilling: 900 mm / Sawing: 850 mm Technical Data: • Y-axis range: - Drilling: 920 mm - Sawing: 860 mm • X-axis support: 3000 mm • Z-axis (panel thickness): 12 mm to 40 mm • A-axis rotation: 360° • Feed speed: 20 m/min • Minimum panel dimensions (X) 300 x (Y) 120 x (Z) 12 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Maximum and minimum drill hole diameters: 3 mm – 35 mm • The saw moves along the X-axis • Maximum groove depth with saw blade: 10 mm • Motor: 0.75 HP, 3x 400V/ 3x 230V • Minimum required extraction capacity: 2300 m³/h

Stanje: rabljeno, Working width: 1350 mm Number of sanding units: 2 pcs. Maximum workpiece thickness: 160 mm Sanding belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT: ROLLER 2ND BELT: COMBINATION UNIT (ROLLER/PAD) SUITABLE FOR SOLID WOOD, VENEER, AND INTERMEDIATE COATING SANDING Chjdpfx Asrmucxofqsf - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 x 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Continuously adjustable feed conveyor with variable speed: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION: ECO GEAR PATENT SYSTEM - 1 PC. DRUM BRAKE for belt stop - Swiveling ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP STRIP at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER CONVEYORS, each with 2 rollers at infeed and outfeed - AUTOMATIC CENTRING OF FEED CONVEYOR - 1 EXTRACTION CONNECTION, 160 mm diameter - AUTOMATIC TABLE POSITIONING IMPORTANT: New patented belt oscillation system 1. No valves 2. No photo sensors 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt tracking issues! - Unitek steel calibrating roller (same for all models) - Unitek flexible pressure shoe before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set, 6 positions (per pc., same for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width: 1350 mm) - Unitek belt motor upgrade to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor: 14.7 kW (for Excel 2-belt only) - Unitek automatic table lowering in case of emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed or outfeed conveyor with 4 rollers (same for all models) - Price per roller conveyor - Unitek electronic control of machine functions with 12'' touchscreen (same for all models) Automatic workpiece sensing with feed motor control ----- Machine price for the above configuration on request! ----- Optional items at extra cost: Surcharge for 3-belt machine (roller-roller-pad, Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and user training: EUR 1,300.00 ----- All prices are net plus 19% statutory VAT. ----- (Technical data according to manufacturer's information – no liability assumed!)

Stanje: rabljeno, Saw blade tiltable 0-45° Carriage length 3,200 / 3,800 mm Cutting width 1,300 / 1,500 mm Cedjtg Ailjpfx Afqohf Motor power 7.5 kW Cutting height 177 mm Cutting height at 45°: 133 mm Saw blade diameter 500 mm Speed 3000/3600/4200 rpm Working height 870 mm Extraction port diameter 1x120, 1x100 mm Fimal Panel Saw P 3200-08 AX Partnership Edition ----- Manufacturer's description: - Sliding carriage made from anodized aluminum including high-precision guide rails made of hardened and ground steel - Carriage can be locked in any position - Saw blade guard with swiveling device - Outrigger table with adjustable miter fence, including length compensation at every 5° and at 22.5° - Mitre fence and eccentric clamp - Belt change for speed adjustment from above (opening in saw table) - Control lights for set saw blade speed - Electrical system and safety devices conforming to CE standards Technical data: - Saw blade tilt: 0° to 45° - Table dimensions: 1,030 x 680 mm - Working height: 870 mm - Sliding carriage dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm - Cutting width at parallel fence: 1,300 mm - Max. cutting height with 500 mm blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm - Motors: Main saw: 7.5 kW / 10 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP - Noise level according to EN 27960: 84.4 – 86.3 dB(A) - Extraction ports: 1 x 120 mm, 1 x 100 mm - Miter fence extendable to 3,400 mm ----- Equipment Partnership Edition P 3200-08 AX: - 3-axis programming unit for saw blade height adjustment, blade tilt adjustment, and parallel fence adjustment via TFT 15" touchscreen (Windows-based), including 2,500 program memory slots, 2 USB ports, and 1 Ethernet network connector - Scoring unit with electromechanical height adjustment and motorized axial pulse adjustment, including digital displays for height and width - Miter fence with 3 stops; 2 stops with digital display, 1 stop analog but also digitally adjustable via coupling - Upper control panel including automatic star-delta start Optional at extra charge (on request): - Cutting width 1,500 mm, sliding carriage length 3,800 mm ----- Price of the above-mentioned machine on request! ----- Prices excl. packaging and shipping Prices excl. statutory VAT ----- (Technical data as per manufacturer – no guarantee!)

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) Cedjt R T Hcepfx Afqehf 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 1.020 h, Funkcionalnost: popolnoma funkcionalen, On offer: A Holzher nesting machine with very low operating hours and top-of-the-line equipment! Manufacturer: Holz-Her Model: Nextec 7707 Year of manufacture: 2018 Weight: 4,980 kg Csdpfx Afewtiq Sjqshf Operating hours: 1,020 Processing length in X: 3,100 mm Processing length in Y: 2,200 mm Vector speed: 110 m/min Equipment & Features: Milling unit: 12 kW, air-cooled, 1,000 – 24,000 rpm Drilling unit (Drill Head XL): 24 spindles (18 vertical, 6 horizontal) including saw unit in X-direction (grooving in X-direction) Angle gear unit: e.g., Lamello P-System Workpiece support: High-flow nesting table with continuous vacuum field, 16-zone vacuum, software-controlled Safety device: Light barrier Workpiece clamping: 2 x 140 m³/h vacuum pumps, low-maintenance dry-running type, additional 250 m³/h dry-running vacuum pump Tool changer: 10-position pick-up changer integrated into the machine frame, 1-position X/Y pick-up changer with tool cover NEXTEC module: CabinetSelect DirectCut: Line laser in X-/Y-direction, including software Software: CAMPUS machine license included, aCADemy CAD/CAM module and CabinetControl Base, 'Warehouse' software module, Production software module, BetterNest free-form nesting module