Centrirna stružnica in stružnica s podajnim vretenom

MARTIN DS-50

Stanje: rabljeno, Leto izdelave: 2001, Space requirement approx. 1450 x 1560 x 2620 mm Machine weight approx. 1.8 t The machine base is a heavy-duty welded construction. The coolant tank is integrated into the machine bed. The cross table is made of cast iron; the guideways are ground and scraped with adjustable gibs. The ram head is also made of cast iron, the guides are ground and scraped, and equipped with lubrication grooves. The ram head can be swiveled +/- 20 degrees. Stroke is adjustable via a side opening. The tool is positioned against the longitudinal stop. The machine is equipped with a mechanical stroke drive. The CNC rotary table controller is housed in the operator panel. The zero point can be set in any desired position of the indexing head with division options from 2-999 symmetric and 99 asymmetric divisions. Machine color: Green Bledpfowbi Awox Afqer Indexing head color: Red --> Technical Data Adjustable stroke from 0 up to: 250 mm (No. 1) Distance column/tool holder: 425 mm (No. 2) Distance table surface/head: 430 mm (No. 3) Vertical ram adjustment: 430 mm (No. 5) Rotary table diameter (NC on axis A): 450 mm (No. 6) Longitudinal table travel (NC on axis Y): 250 mm (No. 8) Cross table travel (NC on axis X): 220 mm (No. 9) Bore at the table center: 135 mm (No. 10) Infinitely variable ram strokes per minute: 22-90 strokes/min Ram motor power (automatic brake, asynchronous): 3 kW Dimensions (ram fully raised; LxWxH): 1450x1560x2620 mm --> Digital operating manual available in German and English

Stanje: dober (rabljeno), Leto izdelave: 1987, premer struženja nad prečnim suportom: 810 mm, izvrtina vretena: 130 mm, premer struženja: 1.140 mm, stružna dolžina: 7.500 mm, poteza s peresom: 300 mm, skupna dolžina: 7.500 mm, skupna širina: 2.300 mm, skupna višina: 1.650 mm, širina postelje: 600 mm, Please note: these are not original pictures. The length is only 3000 mm, not 5000 mm. 3-guideway bed construction 2-axis Heidenhain digital readout Power feed in 3 directions on all tool post slides Central lubrication Workpiece weight when flying in chuck: 2,500 kg Bledpfx Asv S Dp Ijfqsr Workpiece weight unsupported: 8,500 kg Workpiece weight supported: 10,000 kg Optional: 4-jaw chuck approx. 1,200 mm Optional: 4-jaw chuck approx. 1,500 mm Optional package with 3 fixed steady rests, for workpieces from ... to ... Turning length: 5,000 / 7,500 mm Swing diameter over bed: Ø 1,140 mm Swing diameter over cross slide: 810 mm Swing diameter in gap: Ø 1,500 mm Gap length: 2,500 mm Spindle bore: 130 mm Bed width: 600 mm Quill diameter: 130 mm Quill stroke: 300 mm Spindle taper: 6 Morse taper Motor power: 25 kW Speed range: 9 – 900 rpm Length: 7,500 mm Width: 2,300 mm Height: 1,650 mm Weight: 12,000 kg

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Centre distance: 1000 mm Spindle speeds: 11.2 – 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev – 32 steps Cross feeds: 0.02 – 0.71 mm/rev – 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Approx. machine dimensions (LxWxH): 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation) and available ex location Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for speeds up to 2000 rpm. Thread cutting: metric, module, imperial Chip guard Chuck guard (mechanical) MULTIFIX toolpost with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection Machine feet Bsdpfxov A Sqhj Afqjlr UVV (accident prevention regulation) pre-installed *

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 600 mm, pomik po osi Z: 700 mm, - Milling head/spindle overhauled in 2022 for €28,000 - Heidenhain iTNC530 CNC control - NC swiveling milling head: B-axis as full NC axis A-axis horizontal/vertical - NC rotary table (C-axis) - 72-position tool changer - Chip conveyor - Electronic handwheel - Coolant system (internal coolant supply 20 bar) Bloderz I Hbepfx Afqor Technical details: X-axis travel (longitudinal): 1200 mm Y-axis travel (cross): 600 mm Z-axis travel (vertical): 700 mm C-axis rotary table: 360° B-axis: ±90° Rotary table size: 800 mm Spindle taper: SK40 Spindle speed range: 0–6300 rpm Number of tool places in ATC: 72 Spindle drive power 100/40% duty cycle: 17/25 kW Machine weight approx.: 9000 kg Technical data, accessories, and machine description are not binding.

Stanje: rabljeno, Leto izdelave: 1996, Spindle diameter: 60 mm X-axis travel: max. 1000 mm – min. 100 mm Y-axis travel: max. 1000 mm – min. 100 mm Drilling capacity in steel: max. 40 mm Tapping capacity: max. M24 Material thickness: max. 60 mm – min. 5 mm Spindle speeds – infinitely variable: 1 – 1,000 rpm Feed rate, infinitely adjustable, rapid traverse: 1 – mm/min Feed rate, infinitely adjustable, working feed: mm/min Feed force: 16 kN Tool holder: SK 40 Spindle stroke: 600 mm Positioning speed in all axes: 1 – 10,000 mm/min Positioning accuracy over 300 mm: +/- 0.01 mm Table load capacity: max. 500 kg Working height: 1,000 mm Machine weight: approx. 4.8 t Space requirement: approx. 3.5 x 3.3 x 3.1 m Bjdpfogvkkzsx Afqslr Control system: Bosch CNC plate drilling machine HMB PBM1000/60 - W12 for drilling end plates and base plates in steel construction, equipped with automatic tool changer (12 positions) Number of drilling spindles: 1 Operating voltage: 220/380 V Frequency: 50 Hz Total connected load: 22 kVA

Stanje: novo, Leto izdelave: 2020, Električni stroj za izdelavo kolen je naprava za oblikovanje kolen iz okroglih in pravokotnih cevi različnih premerov. Stroj za izdelavo kolen EEM-200plus predstavlja izboljšano različico stroja EEM-200. Dodatno ima četrto spodnjo stiskalno orodje, kar omogoča stiskanje cevi z vseh štirih strani med upogibanjem in zagotavlja boljšo kakovost kolena. Naš stroj lahko uporabljate tako za delo z okroglimi kot pravokotnimi cevmi. Stroj za izdelavo kolen EEM-200plus omogoča obdelavo cevi s premerom od 80 do 200 mm. Pozor: Notranji premer cevi, ki jo uporabljate za upogibanje, mora biti 1 mm večji od premera matrice stroja za upogibanje! Zaklep cevi mora biti zaprt ali zavaran, da se med upogibanjem ne odpre! Blodpfjf Epznex Afqjr Stroj za izdelavo kolen EEM-200 je električen in za delovanje ne potrebuje zračne ali oljne napeljave. Poraba električne energije znaša 1,5 kW/h. Potrebna napetost je 380 V. Uporaba stroja je možna v okoljih s temperaturo od -5 do +45 stopinj Celzija. Stroj za izdelavo kolen je primeren za upogibanje cevi z največjo debelino do 0,8 mm. Stroj EEM-200plus omogoča upogibanje kolen s pomočjo posebnih stiskalnih orodij. Za vsak premer cevi je potreben en komplet stiskalnega orodja. Če želite upogibati cevi različnih premerov, morate dokupiti dodatna stiskalna orodja. Ob nakupu stroja prejmete štiri komplete stiskalnih orodij, tako da lahko upogibate do štiri premera cevi v razponu od 80 do 200 mm (izbira premerov po vaši želji).

Stanje: rabljeno, Leto izdelave: 1973, številka stroja/vozila: 20591, Roller diameter: 500 mm Throat depth: 1050 mm Workpiece height: 400 mm Voltage: 400 V Table size: 750 x 800 mm Total power requirement: 5.5 kW Machine weight approx.: 1.5 t Space requirement approx.: 2.4 x 1.0 x 2.2 m Bledecxxr Eepfx Afqsr Bandsaw in heavy-duty cast-iron construction, equipped with a stepless variator gearbox and 4 preselectable gear stages. Cutting speed adjustable: Stage 1: 15–79 m/min, Stage 2: 67–305 m/min, Stage 3: 207–940 m/min, Stage 4: 2350 m/min! Band tensioning device, worktable tiltable +/- 40°, rear auxiliary table, various bandsaw blade guides, blade grinding device, work light, foot switch, accessories.

Stanje: dober (rabljeno), Težki stružnica, stružnica, stružna postelja, vodilno-vlečni stružnica, Leit- und Zugspindel-stružnica Bodpfxewrfkfe Afqelr -Proizvajalec: Meuser, vodilno-vlečni stružnica tip M-IV-S -Postelja stroja: kaljena -Dolžina struženja: 3800 mm -Premer struženja nad posteljo: 720 mm -Premer struženja nad suportom: 440 mm -Vretenina odprtina: Ø 95 mm -Hitrosti vretena: 22,4 - 1000 o/min -Klinično vpenjalo Forkardt Ø 400 mm -Držalo konjička: MK6 -Pogon: 18 kW -Oprema: 1x luneta, Multifix nosilec orodja, orodja glej fotografije -Dimenzije: 5930/1650/H1600 mm -Teža: 7500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Bernardo FM 45 V Drilling and Milling Machine The FM 45 V drilling and milling machine offers an excellent price-performance ratio thanks to its standard quill feed. The dovetail guide on the gear head ensures maximum precision and stability. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Throat: 260 mm Spindle speed: (12) 50 - 2520 rpm Spindle taper: MT 4 Quill stroke: 120 mm Quill feed: (3) 0.12 / 0.19 / 0.26 mm/rev Table size: 820 x 240 mm Distance spindle / table: 40 - 485 mm Travel (x / y): 550 / 190 mm Vertical adjustment of milling head: 400 mm T-slot size: 14 mm T-slot spacing: 55 mm Bodpfsvutw Hex Afqjlr Motor output S1 100%: 0.85 / 1.1 kW (400 V) Motor input S6 40%: 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H): 1150 x 850 x 1450 mm Approx. weight: 285 kg Standard features include automatic quill feed and thread cutting device Large speed range 50 - 2520 rpm (12 steps) Dovetail guideways for x, y, and z axes, adjustable via gib strips Versatile applications: slot milling, face milling, boring, etc. Heavy-duty, large cross table, precision-ground surface Milling: quill feed via handwheel Drilling: quill feed via handwheel High-quality aluminum motor, designed for continuous operation Sturdy and vibration-free cast iron construction Quick and easy speed changes using shift lever Tilting milling head for angle drilling, bevel milling, etc. Location: Ex-stock 54634 Bitburg - Available at short notice -

Stanje: dober (rabljeno), Leto izdelave: 2010, LZ Lathe, Manufacturer: JET, Model: GHB-1330, Year of manufacture: 2010 Bljdpfx Asqwgzqsfqor Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix tool post size A, 2 steady rests, and coolant system. Swing over bed: 330 mm Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Spindle bore: 38 mm The machine is in good condition, coming from a training workshop. Machine documentation is available.