Stroj za spajanje prstov

Marinus Machinery Powermax Finger Jointer & Defect Saw

Leto izdelave: 2009, obratovalne ure: 214 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Thin-cutting frame saw DSG Sonic – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical specifications: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of frame strokes: approx. 550/min Cutting heights with different blade lengths: Blade length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with twin planer) Blade length 420 mm → cutting height: 30–128 mm, 45–128 mm Blade length 500 mm → cutting height: 80–210 mm, 45–210 mm Blade length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For standard machine: +185 mm With magazine: 250–1700 mm With twin planer: +250 mm Block height difference: ±0.5 mm Cutting width with side fence: 140 mm 🔹 Additional technical data: Cutting width with middle fence: 2 × up to 60 mm Optional channel width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss when cutting (kerf thickness): from 0.9 mm Saw blade life (depending on wood type): ~40 hours Nksdpfx Abjw Dp Ufobot Machine weight: - Basic version: 3,000 kg 🔉 Noise levels (hearing protection required): At the machine (1 m): - Idle run: 97 dB(A) - Cutting: 99 dB(A) At operator workstation: - Idle run: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and air system: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3,200 m³/h (30 m/s) Operating air: - Min. 6 bar - Consumption: 200 l/min Lubrication: central, with guide rail monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Connecting cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2024/121/47, premer žaginega lista: 420 mm, GRAULE crosscut and mitre circular saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter: 420 mm Blade bore: 40 mm Cutting height: 170 mm Blade tilted at 45°: cutting height 115 mm, cutting length 410 mm Including the following accessories: 1 pc. machine tiltable from behind on both sides by hand crank: from 90° to the left up to 45° and to the right up to approx. 30°, up to approx. 60° Nedotwz Tlepfx Abbjkt 1 pc. TCT (carbide-tipped) circular saw blade 420x3.4/2.4x30 mm, 48 teeth, negative hook angle for wood 1 pc. machine stand

Stanje: rabljeno, Working width: 1350 mm Number of sanding units: 2 pcs. Maximum workpiece thickness: 160 mm Sanding belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT: ROLLER 2ND BELT: COMBINATION UNIT (ROLLER/PAD) SUITABLE FOR SOLID WOOD, VENEER, AND INTERMEDIATE COATING SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 x 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Continuously adjustable feed conveyor with variable speed: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION: ECO GEAR PATENT SYSTEM Nodpfxermucxo Abbokt - 1 PC. DRUM BRAKE for belt stop - Swiveling ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP STRIP at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER CONVEYORS, each with 2 rollers at infeed and outfeed - AUTOMATIC CENTRING OF FEED CONVEYOR - 1 EXTRACTION CONNECTION, 160 mm diameter - AUTOMATIC TABLE POSITIONING IMPORTANT: New patented belt oscillation system 1. No valves 2. No photo sensors 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt tracking issues! - Unitek steel calibrating roller (same for all models) - Unitek flexible pressure shoe before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set, 6 positions (per pc., same for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width: 1350 mm) - Unitek belt motor upgrade to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor: 14.7 kW (for Excel 2-belt only) - Unitek automatic table lowering in case of emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed or outfeed conveyor with 4 rollers (same for all models) - Price per roller conveyor - Unitek electronic control of machine functions with 12'' touchscreen (same for all models) Automatic workpiece sensing with feed motor control ----- Machine price for the above configuration on request! ----- Optional items at extra cost: Surcharge for 3-belt machine (roller-roller-pad, Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and user training: EUR 1,300.00 ----- All prices are net plus 19% statutory VAT. ----- (Technical data according to manufacturer's information – no liability assumed!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Set for finger jointing in medium and high volume production. The machine is technically efficient and in good condition. The set includes several tool kits. Features: – Industrial set with a single tenoning machine. Operator-supervised pack loading allows for processing of lower grade raw material, – Process controlled by microprocessors (automatic control), – Rotation of the pack after each cycle on a rotary table (butt joint) or flipping the pack on its back (face jointing for furniture, unique GOMA solution), – Set includes an automatic press loading station, – Possibility of intermediate cutting on the press, TENONER WITH FEED TABLE Specification Values Spindle diameter (milling): 50 x 210 mm Spindle speed: 6,000 rpm Main motor: 18.5 kW Tool dimensions: 250 x 160 mm Nsdpfelu D Tfox Abbskt Saw spindle: for trimming board ends Special chipper: 300 x 8 mm Chipper motor: 6 kW / 3,000 rpm Feed table: infinitely variable speed Working width x height: 600 x 30–160 mm Glue nozzle profile: according to tooling FC-10 PZ6/2 PRESS Specification Values Board width: 30–160 mm Board thickness: 20–70 mm Finished board length: 6,000 mm Pressing force: 3 – 7.5 – 10 T Hydraulic power unit: 3 kW / 140 bar

Stanje: zelo dobro (rabljeno), Kotel Buderus SB 625 -185kw Nodpfxsu I Rx Se Abbokt

Stanje: dober (rabljeno), Tračna žaga linija za velike hlode 1. Transporter za hlode 2. Vmesna skladiščna miza za hlode s podajalnikom za posamezne kose 3. Transporter za hlode z usmerjanjem in centriranjem, vključno z obračalnikom 4. Söderhamn AKE 245A dvostranska reducirna tračna žaga (ARI z 6-rezilnimi glavami) 5. Odbiralnik desk z obračalnikom blokov 6. Bočni prenos blokov 7. Dovod blokov 8. ARI BKR-600 9. ARI DS-75 večlistna žaga 10. Obrezovalna linija z ARI KT-52 obrezovalno žago Cena: 2.100.000 SEK, v obstoječem stanju na lokaciji. Linija je popolna, vendar niso vsi transporterji v pritličju. Vključen je sekalnik Bruks 1503M. Električne omare niso pod napetostjo (ni PLC programske opreme). Demontažo in nakladanje lahko izvede UJ Trading AB. Nedpsikvlisfx Abbjkt Žaga se nahaja na Švedskem.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, PELLET PRODUCTION PLANT 2 T/H COMPLETE WITH BELT DRYER Nkjdpfx Abjw Ebx Sebjt

Stanje: pripravljen za uporabo (rabljen), Complete equipment for kitchen/restaurant/gastronomy/catering/canteen The set includes: 2 modular cold rooms by Viessmann with external dimensions: - 3600 x 2700 x 2450 mm (freezer, can also be used as a chiller) - 4200 x 1800 x 2450 mm (divided into 2 chambers, where one can be used as a freezer and the other as a chiller), complete with refrigeration units Work tables with dimensions: - 300 x 70 x 90 cm - 200 x 90 x 85 cm - 200 x 90 x 90 cm - 120 x 70 x 85 cm - 300 x 80 x 85 cm - 120 x 75 x 90 cm - 300 x 80 x 80 cm Sinks with dimensions: - 120 x 70 x 90 cm with two 50 x 50 cm bowls - 120 x 60 x 85 cm with one 40 x 40 cm bowl - 190 x 80 x 90 cm with one 50 x 40 cm bowl - 110 x 58 x 85 cm with one 25 cm diameter bowl Lockable cabinet with shelves, dimensions: - 60 x 55 x 240 cm Dishwasher, dimensions: - 70 x 70 x 200 cm Two combi steam ovens: - ELOMA ELH6-1 (90 x 80 x 75 cm) - PAULUX GXA 6-11 (90 x 80 x 85 cm) Bake ovens: - ENDERS 42 x 48 x 30 cm, 2 units Industrial induction cooktops: - EKU C-I-750-EST-4-3.5 (80 x 75 x 80 cm) - PAULUX (40 x 50 x 35 cm) Deep fryers: - 80 x 80 x 80 cm - PAULUX 80 x 80 x 80 cm, 2 units - PAULUX 60 x 80 x 35 cm Nkjdpfxeq A Sups Abbot Wall shelves: - 190 x 50 x 40 cm, 3 units - 140 x 40 x 80 cm Salamander grills: - 40 x 65 x 30 cm, 2 units Water softener Hot water dispenser Complete set of racks suitable for use in cold rooms or storage Extractor hoods: - 320 x 90 x 55 cm - 100 x 45 x 60 cm - 80 x 55 x 90 cm - 160 x 45 x 100 cm - 96 x 45 x 100 cm - 90 x 80 x 150 cm - 60 x 43 x 70 cm Plus other smaller devices visible in the photos All devices are in good working order.

Leto izdelave: 2011, Stanje: skoraj kot novo (rabljeno), For sale is 1 roller conveyor, each including a geared motor: Technical Data: Year of manufacture: 2011 Length: 12.75 m Njdpfx Absihpn Njbekt Width: 1.40 m Height: 1.00 m Load capacity: Up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (further specifications see nameplate in the image) Three of the four roller tracks have a wooden sidewall along the entire length, and one roller track has a side wooden wall with a length of 5.20 m. Two of the four roller tracks are equipped with 3 lateral removal systems each. (see pictures)

Stanje: dober (rabljeno), Leto izdelave: 1996, Weinig Unimat 23 Four-Sided Planer – Manufactured in Germany – Ribbed table – Year of manufacture: 1996 – Feed rollers embedded in the table TECHNICAL SPECIFICATIONS: planing width: 230 mm planing height: 160 mm ribbed table spindle diameter: 40 mm 1st bottom spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW Nkedpfx Aeh Dwl Dobbjt 5th bottom spindle: 7.5 kW infinitely adjustable feed speed: 6–36 m/min feed motor power: 5.5 kW six driven top steel rollers two driven top rubber rollers three feed rollers in the table pneumatic feed pressure pneumatic shoe pressure spindles with brakes length of infeed table: 1970 mm electric height adjustment central lubrication (divided) diameter of dust extraction outlets: 140 mm machine dimensions (L/W/H): 410 / 200 / 180 cm weight: approx. 3000 kg