Robusten teleskopski viličar

Manitou MHT 10130 (Rental only)

Stanje: novo, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Hello, we are offering a brand new Toshiba outdoor air conditioning unit here. The unit is a 2018 model year but has never been installed. The unit has a capacity of 45 kW. Rsdpfjlc Eukox Abhen

Stanje: pripravljen za uporabo (rabljen), najv. debelina jeklene pločevine: 10 mm, zadnji prislon: 1.000 mm, moč: 21 kW (28,55 KM), skupna dolžina: 4.330 mm, skupna širina: 2.200 mm, skupna višina: 2.110 mm, lastna masa: 10.000 kg, dolžina obdelovanca (maks.): 3.100 mm, CNC Siemens, zadnji naslon in nastavitev rezalnega kota; 2 sprednji podpori dolžine 3 metre; ročna nastavitev reže rezila; zadnja zaščita za vstop. Udari/min: 9 > 40 udarcev/min Nastavljiva rezalna naprava: 0,1 > 1,5 mm Redjv Taiaopfx Abhen Zadnji naslon: 1000 mm Siemens Nastavljiv rezalni kot: 0,5° > 2,5° Potrebni tok: 380V Število držal za pločevino: 17x

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Blast container for blasting with glass beads, ceramic, corundum, chilled iron grit, garnet sand, etc. The blast container features a fully covered screw conveyor floor and a genuine abrasive recycling system. No more sweeping, vacuuming, or shoveling of abrasive in the blast chamber while processing your workpieces, thanks to our recirculation system. Abrasive cleaner windsifter with four-way adjustment: airflow volume, flow speed, extraction proximity to the abrasive, and abrasive bed height setting. Electric vibrating screen for continuous coarse separation. Bucket elevator with trapezoidal thread spindle for belt tensioning and speed monitoring. Container lining made of 4mm, 70 Shore fabric-reinforced rubber guarantees a service life of up to 30 years when used correctly. The container can be fully opened from the side for simple forklift loading. The container can be upgraded with crane roof hatch, floor reinforcement, or lateral blast chamber extension. For stainless steel blasting, the container can be equipped with an actual magnetic drawer or drum-type magnetic separator, as well as a stainless steel grating. Filter unit with easy-maintenance access doors, big bag dust collection, secondary filter H13/14, and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special warranty of 5 years included on all essential components of the blasting system. Rjdeuwlzyepfx Abhsn Safety features: door/gate limit switches, dead-man control, emergency lighting, blast chamber viewing window, emergency stop inside the blast chamber and on the control cabinet, quick-release pressurized vessel vent.

Stanje: novo, zadnji prislon: 750 mm, - Capacity 1050 x 6 mm - NC electric backgauge - Foot pedal - Rear photocell safety guard - Support arms - Cutting line illumination Rjdogg N Hbopfx Abhsn - Brake motor - Emergency stop - Documentation - Weight: 1800 kg - 400V

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm Rodpenh R Eksfx Abhon • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Leto izdelave: 1993, Stanje: rabljeno, Bending length: 3,000 mm Clearance between uprights: 2,750 mm Max. pressing force: 180 t Control system: CYBELEC DNC70 Throat depth: 220 mm Total power requirement: 15 kW Rjdpfx Abjkh Niqohon Machine weight: 11,000 kg

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Redpfx Aoh Etf Robhen - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HR15149, Leto izdelave: 2025, nosilnost: 7.000 kg, dvižna višina: 34.700 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 3.260 mm, moč: 155 kW (210,74 KM), širina nosilnega okvirja vilic: 2.000 mm, dolžina vilic: 1.200 mm, lastna masa: 24.000 kg, skupna dolžina: 8.860 mm, vrsta pogona: Diesel, gradbena širina: 2.500 mm, Rotating Telehandler Chassis number: HR15149 Fork width: 150 mm Fork thickness: 60 mm ISO Class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Telescopic Redpfx Ajwruqzebhen Transmission: Hydrostatic Condition: New machine Technical condition: New Front tires type: Solid rubber Front tires size: MITAS EM60 17.5 R25 22PR Front tires condition: New Rear tires type: Solid rubber Rear tires size: MITAS EM60 17.5 R25 22PR Rear tires condition: New Description: 12 months factory warranty / Max. 2,000 operating hours Sideshift, Rear work lights, front work lights, heater, STVZO road approval, full cab, air conditioning, interior mirror, exterior mirrors, joystick, LED lighting, seat, Wheel chocks, machine maneuvering via radio remote control, preparation for work platform with winch, TÜV inspection preparation, 20 km/h, mechanically adjustable textile seat with headrest (GRAMMER), EcoStop, 2 cameras (telescopic head, right side) with display in the cab.

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel floor with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Manually operated BPW landing legs - 550 mm long, 8° chamfer at end of gooseneck - Front wall including park position for rear wall, 400 mm high - Spare wheel holder mounted vertically on the front side of the gooseneck - 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck - Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized) - Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single-extendable: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel plate floor with anti-slip coating - Chamfered transition between fixed part and deck for bridging rails and wheel recesses - Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm Rjdoi Ai E Rspfx Abhjn - Prepared for hydraulic ramps (electrical supply) - Rails to widen up to 3,000 mm - 8° chamfered vehicle rear, 550 mm long - Slide system for easy mounting/dismounting of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform - 1 pair of stanchion pocket rails approx. center of the loading area - 1 pair of stanchion pocket rails on the fixed part - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic double-folding ramps, 2,750+1,500x800 mm - Larch wood surface - Operated by remote control (wired and wireless) - Quick-change ramp (dismantling system) Chassis: - Axle brand: BPW ECO Max - 2 ride heights - 4 axles @ 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 x rigid axles and 2 x friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system by Knorr (according to EU standards with EBS-E) - Knorr TIM G2 (Trailer Information Module) - RSS (Roll Stability Support) stability control - Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm - Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included - Plug-in bulkhead at the end of the excavator trough - Electrohydraulic unit for ramp operation - Ramp control by wireless remote - Hydraulic rear support legs for stabilization during loading - 1 pair of additional reversing lights at the rear, activated when reversing - Larch wood widening planks (option)

Stanje: novo, Load capacity 10 t Workpiece diameter 100 - 3200 mm Drum diameter 300 x 120 mm Feed rate 100 - 1000 mm/min Total power requirement 2 x 0.55 kW Features • Electronic components from Siemens/Schneider/Delta • Frequency-controlled drive unit speed • Rollers: steel/rubber • High stability due to robust construction • CE certificate • Excellent price-performance ratio • Cable remote control Redpfef Ep Disx Abhsn • Dual foot pedal • 3-year warranty (see warranty conditions)