Ključavničasto teleskopsko platformo

Manitou 120 AETJ 12mtr

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Cedpfx Afou Aa I Sonsgp Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 2.485 h, številka stroja/vozila: 0300212166, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: kolesa Codpfx Afjtr Itbsnsgp Lastna teža: 10.850 kg Dvižni steber: vrtljiv pregibni krak Dvižna zmogljivost: 230 kg Delovna višina: 2.050 cm Maks. horizontalni doseg: 1.210 m Transportne dimenzije (D x Š x V): 8,55 x 2,45 x 2,85 Za dodatne informacije kontaktirajte skupino PFEIFER.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009,

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 6.000 obr/min, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL KEY DATA Year of manufacture: 2020 Travel/capacities: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Cross (Z): 1,500 mm Clamping surface NC rotary table: Rotary indexing table: 2,400 x 1,900 mm Max. transport load (with centrally supported load): 10,000 kg Positioning accuracy arc/sec: ± 2.5" Max. swing diameter: approx. 2,900 mm Paintwork: RAL 7024 graphite grey RAL 7038 agate grey Tool holder: DIN 69871 AD (ISO50) Big Plus Pull stud: DIN 69872 Form A Main spindle drive: Motor/brand main spindle drive Heidenhain Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed control/gearbox: 3-stage (oil-cooled) with automatic shifting Spindle speeds 6,000 rpm: low range rpm 0-738 mid range rpm 739-1,842 high range rpm 1,843-6,000 Axis drives/axis feed rates: Axis drive motors: brand Heidenhain (digital drives) Rapid traverse max.: X, Y, and Z axis 25,000 mm/min Feed rate max.: X, Y, and Z axis 15,000 mm/min Max. average acceleration: 2 m/s² Max. feed force: X, Y, and Z axis 26,000 N Linear axis drive systems: X-axis (longitudinal): preloaded ball screw Ø 63 x 40 Z-axis (vertical): preloaded ball screw Ø 63 x 20 Y-axis (cross): preloaded ball screw Ø 50 x 20 Guide system: X-axis (longitudinal) 6 pcs. type INA RUE 55 EL Z-axis (vertical) 4 pcs. type INA RUE 65 EL Cgsdpfxoygiwqo Afnjp Y-axis (cross): 8 pcs. type INE RUE 55 E-HL and additional damping unit Clamping table / table surface: T-slot size 10x: 22 H 12 mm Reference slot center 1x: 22 H 8 mm T-slot spacing: 150 mm (pitch spacing outer slots 1,800 mm) Weight: Weight RT3000: approx. 32,000 kg Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 positions Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system with boost to 37 bar IKZ Special operating mode 4 RepairFIT is our proven offer for a profitable entry into our product lines. Machines offered in this line are sourced by us following a strict selection process and subjected to a thorough inspection (deep-dive check). After intensive cleaning, any identified obvious defects and faults are professionally rectified by our expert service team.

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 24.210 h, This injection moulding machine from Dr. Boy is located at Plastima Used Machinery in the machine storage facility. The machine is from 2007 and has relatively low operating hours for its age. – Brand: Dr. Boy Cedpfotpf N Usx Afnegp – Model: 55M – Year of manufacture: 2007 – Screw diameter: 32 mm – Shot volume: 96.5 cm³ – Clamping force: 55T – Operating hours: 24,210

Stanje: skoraj kot novo (rabljeno), Donau Donauflex 135 hitrohodni radialni vrtalni stroj Proizvajalec: Donau Tip: Donauflex 135 Codpfx Asxcyz Refnegp Leto izdelave: 2020 Stanje: Zelo dobro, rabljen, a kot nov Takoj na voljo iz zaloge.

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 3.178 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 667171, skupna masa: 1.154 kg, nosilnost: 210 kg, doseg roke: 3.096 mm, This is a KUKA KR 210 R3100 ultra, year of manufacture 2018. We are happy to offer you the robot as a fully refurbished unit as well! Cgsdornrpropfx Afnep The robot includes the following options: - BoardPackage - EthernetKRL - LoadDataDetermination - Profinet KRC-Nexxt - RemoteService - SafeOperation - UserTech

Stanje: novo, Leto izdelave: 2024, Genie Z34/22 IC diesel articulated boom lift, new, used, and demo machines available Cedpfx Aornqq Hofnogp

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This advanced CNC-controlled notching and cutting system is designed for the fast thermal cutting and notching of H, U, L profiles, flat bars, and square tubes. The steel profile is positioned precisely at the cutting location within the system by a pulling clamping measuring carriage via the roller conveyor. A robotic arm equipped with cutting units (oxy-fuel or plasma) cuts the profiles at the selected positions. The cut or notched finished components either fall into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: The Ficep profile beam notching system Flex FRC 1201 is equipped for thermal cutting using both oxy-fuel and/or plasma technology. As the plasma power source, a Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used. Thicker materials or bevel cuts greater than 32 mm are processed with the oxy-fuel cutting unit. Transport System: On the infeed side before the Ficep Flex FRC notching system, there is a chain drag cross transporter with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. Subsequently, the profiles are transported into the machine on a robust roller conveyor using a clamping measuring carriage. The system is designed for profiles up to 12 m in length and thus features 12 m roller conveyors with a conveyor width of 1,300 mm on both the infeed and outfeed sides. For the removal of finished components on the outfeed side, there are four chain drag cross transporters, each with a length of 6,450 mm, following the notching system. Mitrol CNC Control and Pegaso Software: The system is operated via a modern CNC control unit from Mitrol. The reliable CNC controller is manufactured by Ficep’s own supplier Mitrol and features Pegaso software, including remote maintenance capability and data transfer interface. Torit DCE Filter Unit The extraction filter unit for dust removal is supplied by Donaldson Torit DCE. Safety: Provided by fencing and light barriers Cgjdpfxotwm Ubj Afnep Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 46.000 h, Axes: 4, Load capacity: 180 kg, Working radius: 3200 mm, Positioning accuracy: +/-0.25 mm, Maximum total load: 430 kg, Cycle performance: 30/min. Control system: KR C2, Maximum control axes: 6, Weight: approx. 35 kg. Robot weight: approx. 1200 kg, Dimensions (X/Y/Z): approx. 1200 mm / 1800 mm / 1700 mm, Robot setup dimensions (X/Y): approx. 1000 mm / 1000 mm, Operating hours: approx. 46,000 h. Documentation available. On-site inspection is possible. Csdpfx Afjt R Trfonjgp