Tovorna dvigalka na tovornjaku
MAN TGS 26,460, Baustoff, Palfinger Kran, Lift-Lenkachse,

Fiksna cena plus DDV

71.400 €

Leto izdelave

2019

Stanje

Rabljeno

Lokacija

Bakum

Tovorna dvigalka na tovornjaku MAN TGS 26,460, Baustoff, Palfinger Kran, Lift-Lenkachse,

MAN TGS 26,460, Baustoff, Palfinger Kran, Lift-Lenkachse,

Podatki o stroju

Oznaka stroja:: Tovorna dvigalka na tovornjaku

Proizvajalec:: MAN

Model:: TGS 26,460, Baustoff, Palfinger Kran, Lift-Lenkachse,

Leto izdelave:: 2019

Stanje:: rabljeno

Obratovalne ure:: 246.255 h

Cena in lokacija

Fiksna cena plus DDV

71.400 €

Lokacija prodajalca:: Hansawinkel 4 Zufahrt über Hansatal 7, 49456 Bakum, Nemčija

Pokliči

Tehnične podrobnosti

Prevoženi kilometri:: 246.255 km

Moč:: 338 kW (459,55 KM)

Prva registracija:: 10/2019

Vrsta goriva:: dizel

Lastna masa:: 14.590 kg

Največja dovoljena obremenitev:: 11.410 kg

Skupna masa:: 26.000 kg

Velikost pnevmatike:: 385/65 22,5

Stanje pnevmatik:: 60 odstotek

Konfiguracija osi:: 6x2

Barva:: bela

Voznikova kabina:: dnevna kabina

Vrsta prenosa:: samodejen

Emisijski razred:: Euro 6

Skupna dolžina:: 6.800 mm

Prostornina tovornega prostora:: 16 m³

Dolžina tovornega prostora:: 6.800 mm

Širina tovornega prostora:: 2.480 mm

Višina nakladalnega prostora:: 950 mm

Velikost sprednje pnevmatike:: 385/65 22,5

Velikost zadnje pnevmatike:: 385/65 22,5

Oprema:: ABS, drsna vrata, kabina, klimatska naprava, meglenke, računalnik na krovu, registracija tovornjaka, spojka prikolice, spojler, zapora diferenciala, žerjav

Podrobnosti ponudbe

ID oglasa:: A22357892

Referenčna številka:: 41479

Posodobitev:: nazadnje dne 18.07.2026

Opis

Številka vozila za povpraševanja: 41479
MAN, TGS 26.460
* Letnik: 2019
* ABS, sistem proti blokiranju koles
* Priklopna kljuka
* EBS, elektronski zavorni sistem
* Električni pomik stekel
* Kabina
* Avtomatska klimatska naprava
* Žerjav
Kledpfx Aqszml Rfjgew
* Zračna vzmetitev
* Dvigalna os
* Servo volan
* Bordni računalnik
* Blokada diferenciala
* Vgrajene zanke za pripenjanje tovora
* Os, ki se vrti
* Klešče za kamne
* Digitalni tahograf
* USB vmesnik
* Asistent za ohranjanje razdalje
* Priprava za OBU (on-board unit)
* Električna okna + ogledala
* Rezervoar AdBlue
* Zadnji spojler
* Meglenke
* Udoben vzmeten sedež
* Vmesnik MP3
* Multifunkcijski volan
* Asistent za ohranjanje razdalje
* Opozorilo ob menjavi voznega pasu
* Hidravlična vzmetna opora
* Vrsta menjalnika: avtomatski
* Vzmetenje: zrak/zrak
* Skupna masa: 26.000 kg
* Lastna masa: 14.590 kg
* Nosilnost: 11.410 kg
* Dovoljena skupna masa: 26.000 kg
* Stanje pnevmatik, 1. os: 60 % -- 60 % - Velikost pnevmatik: 385/65 R22,5
* Stanje pnevmatik, 2. os: 60 % | 60 % -- 60 % | 60 % - Velikost pnevmatik: 385/65 R22,5
* Stanje pnevmatik, 3. os: 50 % -- 50 % - Velikost pnevmatik: 385/65 R22,5
* Velikosti pnevmatik: 385/65 R22,5
* Notranje mere: D = 6800 mm, Š = 2480 mm, V = 950 mm
* Notranja prostornina*: 16 m3
* Število paletnih mest: 17
* Žerjav: Palfinger PK 23.001L
* Letnik: 2019
* Upravljanje iz višine
* Velikost pnevmatik 1. os: 385/65 R22,5
* 2. in 3. os: 315/80 R22,5

Izjava o omejitvi odgovornosti:
Pridržane spremembe, medprodaja in napake.
Dodatne slike in videoposnetke najdete na naši spletni strani.
Naša obsežna ponudba storitev vključuje, na primer:
* Nakup / prodaja / najem gospodarskih vozil
* Hitro in enostavno financiranje
* Urejanje vseh (izvoznih) dokumentov
* Naročanje izvoznih tablic / carinskih tablic
* Priprava vozila: nove ponjave, nalepke, barvanje itd.
* Profesionalno nalaganje / pritrditev tovora
* Tehnični pregledi, storitve registracije
* Prevoz gospodarskih vozil

Za vprašanja se obrnite na naše usposobljeno strokovno osebje, z veseljem vam bomo svetovali.

Referenčna številka za povpraševanja: 41479
MAN, TGS 26.460
* Letnik: 2019
* ABS, sistem proti blokiranju koles
* Priklopna kljuka
* EBS, elektronski zavorni sistem
* Električni pomik stekel
* Kabina
* Avtomatska klimatska naprava
* Žerjav
* Zračna vzmetitev
* Dvigalna os
* Servo volan
* Bordni računalnik
* Blokada diferenciala
* Vgrajene zanke za pripenjanje tovora
* Os, ki se vrti
* Klešče za kamne
* Digitalni tahograf
* USB vmesnik
* Asistent za ohranjanje razdalje
* Priprava za OBU
* Električna okna + ogledala
* Rezervoar AdBlue
* Zadnji spojler
* Meglenke
* Udoben vzmeten sedež
* Vmesnik MP3
* Multifunkcijski volan
* Asistent za ohranjanje razdalje
* Opozorilo ob menjavi voznega pasu
* Hidravlična vzmetna opora
* Prenos: Avtomatski
* Vzmetenje: Zrak / Zrak
* Skupna teža: 26.000 kg
* Prazna teža: 14.590 kg
* Nosilnost: 11.410 kg
* Dovoljena skupna teža: 26.000 kg
* Stanje pnevmatik, 1. os: 60 % -- 60 % - Velikost pnevmatik: 385/65 R22,5
* Stanje pnevmatik, 2. os: 60 % | 60 % -- 60 % | 60 % - Velikost pnevmatik: 385/65 R22,5

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2003

352 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 4446 ... oglasi

Faks:

Zapomni si

Deli Prijavi oglas

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Barcin

776 km

Terenski viličar 5T 4x4 CE
5T CE

25.800 €

EXW Fiksna cena plus DDV

Pokliči

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, nosilnost: 5.000 kg, dvižna višina: 5.000 mm, vrsta goriva: dizel, tip droga: triplex, proizvajalec motorjev: Yunnei EUR5, skupna višina: 2.650 mm, skupna dolžina: 3.900 mm, skupna širina: 2.080 mm, Oprema: bočni pomik, kabina, klimatska naprava, osvetlitev, podaljšek vilic, pogon na vsa štiri kolesa, sprednja zaščita, vilice za palete, Terenski viličar s pogonom 4x4 dizelski motor EUR5 Yunnei DEF30CZEF5 74kW 100KM nosilnost 5T teža viličarja 7,2T triplex drog višina dviga 5m Kljdjuzivvjpfx Aqgsw pnevmatske pnevmatike kabina s klimatsko napravo dolžina vilic 1220mm dodatno žlica v kompletu dodatne vilice dolžine 2000mm viličar je NOV

Poglej podrobnosti

Mali oglas

Rovoskopnalagalnik CATERPILLAR 434 Baujahr 2022 2700 Stunden

Bergkamen

813 km

Rovoskopnalagalnik
CATERPILLAR434 Baujahr 2022 2700 Stunden

80.500 €

Fiksna cena plus DDV

Pokliči

Mali oglas

Tovornjaška dvižna delovna ploščad Palfinger P 900 | 2019

Sittard

863 km

Tovornjaška dvižna delovna ploščad
PalfingerP 900 | 2019

Pokliči

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 16.350 km, vrsta goriva: dizel, skupna masa: 48.000 kg, stanje pnevmatik: 75 odstotek, konfiguracija osi: 8x4, gorivo: dizel, barva: modra, skupna dolžina: 16.200 mm, skupna širina: 2.540 mm, skupna višina: 3.990 mm, Leto izdelave: 2019, obratovalne ure: 1.215 h, Oprema: ABS, registracija tovornjaka, registracija vozila, === TECHNICAL SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 1,215.6 h Mileage: 16,350.9 km Crane manufacturer: Palfinger Crane model: P 900 Chassis manufacturer: Volvo Axle configuration: 8x4 Drive type: Diesel Transmission: Automatic Emission class: Euro 6 Gross vehicle weight: 48,000 kg Tyres: Continental Tyre condition: approx. 75% CE certification: Yes Ksdeygvitepfx Aqgolw === CRANE SPECIFICATIONS === Crane type: Telescopic truck-mounted crane Maximum working height: approx. 90 m Maximum outreach: approx. 32.5 m Maximum lifting capacity: According to Palfinger load charts Outriggers: Hydraulic outriggers Radio remote control: Yes === HIGHLIGHTS === Carefully selected from reliable sources with traceable history CE certified including complete documentation Ready for immediate use and transport Comprehensive technical documentation available === CONDITION === Machine in good technical condition Fully inspected and tested Viewing by appointment possible === LOCATION & PRICE === Location: Sittard, Netherlands Worldwide shipping available Price on request, EXW, plus VAT === DESCRIPTION === Heavy-duty truck-mounted crane Palfinger P 900 mounted on Volvo 8x4 chassis Ideal for professional lifting operations requiring great working height and outreach Part of a professionally maintained fleet Fully CE-certified and immediately ready for use Spare parts and technical support available upon request === DELIVERY === Crane loading on request possible Flexible transport solutions depending on destination and logistical requirements All transports handled professionally by Collé Rental & Sales logistics team

Poglej podrobnosti

Mali oglas

Moerbeke-Waas

985 km

Goseniški bager
CASECX 145 D SR

72.000 €

Fiksna cena plus DDV

Pokliči

Mali oglas

Ekscentrična stiskalnica 130 ton - okvir C Fresan FP 130P Eccentric Press

Küçükbalıklı

1.318 km

Ekscentrična stiskalnica 130 ton - okvir C
FresanFP 130P Eccentric Press

Pokliči

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 26.07.06, Funkcionalnost: popolnoma funkcionalen, Fresan FP 130P - C-Frame Eccentric Press - 130 Tons (1300kN) TECHNICAL DATA: * Capacity: 130 tons (1300kN) * Strokes per minute: 55 SPM (adjustable) * Distance between table and ram: 500 mm * Stroke adjustment: 0 - 132 mm * Motorized ram adjustment: 95 mm * Table dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made of alloyed steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC ground for minimal surface friction. * Bronze bushings, SnBz-12 quality * Pneumatic clutch-brake combination * Fully enclosed helical gear transmission in oil bath * Press safety valve Kodenyh Siepfx Aqgolw * Safety PLC & safety switches & light curtains (Pilz) * Six-way ram guidance with used-oil reservoir * 7-inch HMI touchscreen control panel * Adjustable stroke count with AC inverter * Motorized ram adjustment * Mechanical overload protection (Hydraulic protection can be retrofitted to standard machines after purchase) * Pneumatic counterbalance cylinders (ISO, 4 units) * Automatic central lubrication & used-oil reservoir (thin oil / slideway oil) OPTIONAL EQUIPMENT: * Extra clamping plate * Part ejector (upper and/or lower, mechanical or pneumatic) * Material feeding, loading and unloading systems (decoiler, straightening machine, pneumatic or servo feeder) * Custom-built machine

Poglej podrobnosti

Mali oglas

Naprava za peskanje/peskanje Rösler RDGE-1000-HD

Praszka

602 km

Naprava za peskanje/peskanje
RöslerRDGE-1000-HD

210.000 €

VB plus DDV

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 4.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 111549, potreba po zraku: 6 m³/h, obratovalni tlak: 6 letvica, skupna širina: 1.300 mm, vrsta vhodnega toka: trifazni, notranja dolžina: 8.000 mm, Z veseljem vam predstavljam prilagojeno napravo Rosler 100-4 HD. Klsdpfewvgbgjx Aqgjw Naprava se uporablja za peskanje jeklenih delov, pri čemer je potrebna visoka hrapavost površine. - Leto izdelave: 2024 - Delovni čas naprave: 4000 ur - Transportni trak iz mangana, širina 1000 mm - Regulacija hitrosti transportnega traku - 4 turbine, moč 11 kW, tip Rutten Gamma 330 HD - Gladka regulacija hitrosti vrtenja turbin - Avtomatsko zaznavanje delov - Avtomatska regulacija pretoka abraziva - Avtomatsko polnjenje abraziva - Avtomatsko pihanje delov - Sistem za odvajanje prahu Rosler BF 40/40 - Naprava je dodatno opremljena z mokrim sistemom za odvajanje prahu, kar omogoča peskanje aluminijastih delov. (dodatna instalacija se doplača) - Komora Hot Spot, izdelana iz manganske in orodjarne jekla - Naprava omogoča delo z abrazivom najvišje trdote GH, ostrega roba, ali z rezanim abrazivom, kar je idealna rešitev za gumarsko industrijo, kjer je v procesu vulkanizacije gume potrebna visoka hrapavost površine. - Lopatiče turbine, izdelane iz karbidnega materiala, zagotavljajo 30.000 ur delovanja. - Zaščitni pokrovi turbine, izdelani iz karbidnega materiala, še dodatno zagotavljajo zaščito pred obrabo ohišja naprave.

Poglej podrobnosti

Mali oglas

Bager na kolesih Takeuchi TB295W mit Vollausstattung u. 3 Löffel

Sankt Veit in der Südsteiermark

88 km

Bager na kolesih
TakeuchiTB295W mit Vollausstattung u. 3 Löffel

49.950 €

VB plus DDV

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2014, Vehicle Description Mobile Excavator TAKEUCHI TB295W Year: 2014 According to meter: 9,709 operating hours 10,700 kg 77 kW - Powertilt - Hydraulic quick coupler - All hydraulic lines - Ditch cleaning bucket - 2 trench buckets - Blade - Outriggers - Central lubrication - Air conditioning - Reversing camera Klsdpfov D Dqvox Aqgjw and much more... Very nice and good original condition with original paint! Asking price: €49,950 net Affordable delivery available!

Poglej podrobnosti

Mali oglas

CNC 5-osni obdelovalni center HMC, rezkalni center, obdelovalni center s krmiljenjem CNC SIEMENS 840 LICON Liflex 1266 PC B1

Hessisch Lichtenau

682 km

CNC 5-osni obdelovalni center HMC, rezkalni center, obdelovalni center s krmiljenjem CNC SIEMENS 840
LICONLiflex 1266 PC B1

175.000 €

Fiksna cena plus DDV

Pokliči

Stanje: rabljeno, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Production Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL CNC Path Control (Solution Line) with 5 simultaneously controlled axes Travel distances: X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as a swiveling bridge +/- 135° (270° total) B-axis 360° infinite rotation Axis acceleration X + Y axis: 6 m/s² Axis acceleration Z axis: 9 m/s² Feed force X + Y axis: 7500 N Feed force Z axis: 10,000 N Positioning tolerance (X/Y/Z): 0.008 mm Swivel speeds A-axis: 180° rotation in 4 sec. Interference circle diameter in swing bridge: max. 1400 mm Transport load in swing bridge: max. 700 kg Tool holder: HSK 63 Klsdpfxot Ac Efe Aqgjw Spindle speed: max. 12,000 rpm, stepless Spindle power: 37 kW at 40% duty cycle Spindle torque at 40% duty cycle: 85 Nm Max. spindle torque: 100 Nm Tool change time (chip to chip): approx. 3.7 sec. Tool diameter with adjacent slots occupied: Ø 140 mm Tool diameter with adjacent slots empty: Ø 250 mm Max. tool length: 400 mm Max. tool weight: 20 kg Power supply: 400 Volt, 50 Hz Connected load: 80 kVA Compressed air connection: 5–8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (power 37 kW/40% duty cycle) with liquid cooling and recooling unit - LICON 2-axis rotary tilting table as B and C axis, with hydraulic axis clamping - Zero-point clamping system on the rotary table of the tilting axis - Double pallet changer, without pallets (must be procured separately) - Media transfer for 5 single-acting pressure lines for oil or air for workpiece clamping on pallets. Hydraulic functions range from 30–150 bar, pressure monitoring (controllable via M functions) - Tool changer with 30 positions, disc-type turret - Machine configured for dry machining with MMS minimum quantity lubrication system - MMS-IKZ, internal MMS lubrication supply through spindle - Drag-chain chip conveyor, discharge height 1150 mm - Licon ECO Mode (energy efficient operation) - Direct path measuring system in all axes - Recorded operating hours with control voltage on: approx. 7,500 h Operating space required (L x W x H): 9000 x 5000 x 3800 mm Transport space required (L x W x H): 6100 x 4400 x 3600 mm Weight of base machine: approx. 21 t Total weight: approx. 24 t Very good condition

Poglej podrobnosti

Mali oglas

Tovornjaška dvižna delovna ploščad Palfinger P 300 KS | 2015

Sittard

863 km

Tovornjaška dvižna delovna ploščad
PalfingerP 300 KS | 2015

Pokliči

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, prva registracija: 07/2015, vrsta goriva: dizel, skupna masa: 7.500 kg, stanje pnevmatik: 75 odstotek, konfiguracija osi: 4x2, gorivo: dizel, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 5, število sedežev: 3, skupna dolžina: 8.650 mm, skupna širina: 2.500 mm, skupna višina: 3.500 mm, Leto izdelave: 2015, Oprema: ABS, centralno zaklepanje, meglenke, računalnik na krovu, žerjav, === MAIN SPECIFICATIONS === Year of manufacture: 2015 Operating hours: 5,510 h Working height: 30 m Maximum lateral outreach: 19.5 m Platform basket capacity: 350 kg Chassis: MAN Axles: 2 Ksdpfxjyr Nkzj Aqgjlw Drive: 4x2 Transmission: Manual Cab: Single cab Engine power: — Fuel: Diesel Platform dimensions (L x W): Basket approx. 1.6 m Basket rotation: Yes (80° + 80°) Boom type: Telescopic boom / Articulated joint combination Outriggers: Yes – hydraulic outriggers CE certification: Yes Gross vehicle weight: 7,500 kg === HIGHLIGHTS === Carefully selected from reliable sources with traceable history CE certification and complete documentation available Immediately operational and ready for transport Comprehensive technical documentation available === CONDITION === Very good working condition – thoroughly inspected, serviced, and tested by qualified technicians. Viewing and function testing possible at any time by appointment. === LOCATION & PRICE === Location: Sittard, Netherlands Worldwide delivery available Price on request (EXW / plus VAT) Reliable truck-mounted work platform from renowned manufacturer Palfinger. The Palfinger P300 KS offers a maximum working height of 30 metres and a lateral outreach of up to 19.5 metres, making this machine ideal for maintenance, installation, construction, and infrastructure projects. This machine comes equipped with hydraulic outriggers, automatic basket levelling, and a rotating aluminium work platform, ensuring safe and stable operation under various working conditions. All machines are thoroughly inspected, CE-certified, and ready for immediate use. === TRANSPORT === Crane loading available on request to ensure smooth transport. Flexible transport solutions tailored to your destination and logistical requirements. All transport is professionally organised by the Collé Rental & Sales logistics team.

Poglej podrobnosti

Mali oglas

Portalni rezkalni stroj ZIMMERMANN FZ33c.030

Nemčija

650 km

Portalni rezkalni stroj
ZIMMERMANNFZ33c.030

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, X-travel 2,500 mm Y-travel 3,000 mm Z-travel 1,250 mm Control HEIDENHAIN iTNC530 Spindle speeds – stepless up to 22,000 rpm C-axis ±300° Swiveling head ±110° Tool holder HSK 63 A Tool changer with 50 positions Total power requirement 130 kW Machine weight approx. 53.5 t Installation dimensions approx. 7.6 x 7.3 x 5.7 m This ZIMMERMANN FZ33c is immediately available and in good condition. – NEW spindle installed 6 months ago Description: Technical specifications of the system and working areas X-axis 2,500 mm Y-axis 3,000 mm Z-axis 1,250 mm A-axis ±110° C-axis ±300° Including vibration sensor Including bearing temperature sensor Including rotary feedthrough for internal high-pressure coolant (IKZ) 5-axis path control: Heidenhain iTNC 530/manual pulse generator HR520, 15" TFT color display Extraction system LTA Industrial Air Cleaning Machine enclosure roofing Tool changer 50 positions, chain magazine, rear of the machine Chip conveyor, discharge 60° left, front end Probe not included!!! Blum laser tool measurement "Control NT-Micro" Clamping table Length x Width x Height: 2,500 x 3,250 x 400 mm Table load 8,000 kg/m² (max. 16,000 kg) T-slots, longitudinal 18H12 T-slot spacing 250 mm Dimensions and Weights Required space (without peripherals): approx. 7,600 x 7,300 x 5,650 mm Total weight approx. 53,500 kg Electrical specifications Voltage (three-phase): 400 V Frequency: 50 Hz Compressed air connection (on-site) Required pressure: 6 bar Average air consumption: approx. 15 m³/h (depending on machine equipment) Linear axes drives Rapid traverse X, Y, Z axes: 60 m/min Axis acceleration X, Y, Z axes: up to 5 m/s² Rotary axes drives – VH30 Rapid traverse A, C axes: 360 °/s Axis acceleration A, C axes: 700 °/s² Resolution A, C axes: 0.0001 Linear axes accuracy – according to VDI / DGQ 3441 Positioning accuracy X-axis P = 0.026 mm Kjdpfx Aezak Hgjqgjlw Y-axis P = 0.028 mm Z-axis P = 0.020 mm Repeatability X-axis Ps = 0.015 mm Y-axis Ps = 0.016 mm Z-axis Ps = 0.010 mm Measurement system resolution (interpolated) A, C axes: 0.0001° Rotary axes accuracy – VH30 Positioning accuracy A, C axes P = 12" = 0.0033° Repeatability A, C axes Ps = 8" = 0.0022° Milling head VH30 2-axis milling head: VH30, Milling spindle Siemens Weiss Spindle power S1 (100% duty cycle): 60kW Spindle speed: 22,000 rpm, 95 Nm, HSK-A63 External fork head dimensions L x W approx. 500 x 600 mm Nominal torque rotary axes closed-loop A: min. 1,200 Nm C: min. 1,047 Nm Clamped A and C axes: 3,000 Nm (Grease-lubricated for life with automatic re-lubrication system) Swivel axis – spindle nose: 326 mm Tool holder: HSK 63 A Tool clamping: spring clamp Tool release: hydraulic Admissible tool weight: 4.5 kg (manufacturer specification) Coolant supply external and internal Coolant/lubricant delivery (emulsion) at the face of the milling spindle with band filter system Capacity 1,500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar Blow air at the face of the milling spindle

Poglej podrobnosti

Oglašujte tukaj