Enota za brizganje barve

Makor Start One

Leto izdelave: 1997, Stanje: dober (rabljeno), • Working width (mm): 1300 • CSD system • Cross sanding unit • Longitudinal sanding unit - shoe type • Brushing unit • Ionisation Rjdpfx Aeidi Ivjg Tep

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition Rodpferigxyex Ag Tsp

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: P 04-09-002, neu U05 10 001, Venjakob HGS-K Automatic Spray Machine All images are for reference only Rodpfeumvr Tsx Ag Top - Manufacturer: Venjakob - Year of manufacture: 2004 - Working width: 800 mm (1000 mm) - Current condition: not overhauled - Offer price for overhauled condition - Operator side: right - Dual gun drive system - Dry extraction: 4,000 m³/h - Extraction nozzle diameter: 400 mm - Conveyor belt transport system - Feed speed steplessly adjustable: 3 - 8 m/min - With paint recovery system - Gun control: LS 1 - Installed color circuits: 1 unit - Airless spray system: 4 x Krautzberger KAA 1300 - Number of paint pumps: 1 unit - Pump manufacturer: Wagner 35-70 - Suitable for solvent-based paints - Suitable for water-based paints - Total connected load: 7 kW, current rating: 17 A, fuse: 35 A - Location: in stock - Voltage fluctuations max. +/- 5 % _____ Optionally, we can also provide a quotation for installation and commissioning of the system as well as staff training. Upon request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: A1711012, Pos.1 VEN CLEAN Smart Dust Removal Unit Compressed air dust removal system for cleaning workpieces to be painted, removing dust from profiled workpiece surfaces. Five rotating air blast stars are installed. These detach the dust from the surface. The loosened dust is extracted on both sides by suction ducts. An external extraction system must be provided by the customer. Technical Specifications: Length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Rsdpfx Agju U Ryyo Top Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h (to be provided by the customer) Compressed air consumption: 980 Nl/min Ionization as jet rod (non-EX) with compressed air nozzles, compressed air consumption 840 NL/min Pos. 2 VEN SPRAY Comfort Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY Comfort CNC 7000 - Year of construction: 2017 - Length: 4,350 mm - Working height approx. 930 mm ±20 mm - Working width: 1,300 mm - Operator side: left - Price refers to refurbished machine - Current condition: machine not refurbished - Dual gun drive - Dry extraction - Extraction nozzle diameter: 500 mm - Exhaust air capacity: 10,000 m³/h - Conveyor belt transport system - Continuously adjustable feed speed: approx. 2–6 m/min - With belt cleaning system featuring tungsten carbide scraper. Complete pre-equipment is available for subsequent installation of a second washer. - Gun control, Touch Screen CNC7000 - Installed color circuits: 1 pc. (optionally expandable) - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Length: 4,350 mm + (2,060 mm) - Width: 3,540 mm - Height: 2,600 + 440 mm - Free-standing control cabinet - Electrical connection: 23.33 kW / 63 A - Voltage, Hz: 400 / 50 - Color: RAL 7035 - Location: in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also offer installation and commissioning of the system, as well as training for your staff. Upon request, we also offer regular maintenance and servicing of the machine. For further information, feel free to contact us!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, WEINIG UNIMAT SUPER 4 Planer – German-made – Very good condition – Year of manufacture: 2004 – Operating manual (DTR) TECHNICAL SPECIFICATIONS: Planing width: 150 mm Planing height: 50 mm Spindle diameter: 40 mm Equipped with tooling Adjustable top head 1) Bottom head: 11 kW, 6000 rpm 2) Top head: 18.5 kW, 7000 rpm 3) Bottom head: 5.5 kW, 6000 rpm Feed motor: 2.2 kW Feed speed adjustable via inverter: 0-18 m/min Feed with cardan shafts Pneumatic hold-down Three hardened steel top feed rollers One rubber top feed roller Ribbed infeed table Infeed table length: 1950 mm Total power: 37 kW Central lubrication Transport dimensions: Length/Width/Height: 320x220x220 cm Weight: ~2700 kg Redpfx Agjin Nrgo Tjp

Stanje: novo, Leto izdelave: 2020, obratovalne ure: 1 h, SWISS KRONO Kft. ponuja CNC vrtalni in rezkalni stroj MW2131KS proizvajalca Masterwood. V prilogi dodajamo opis strojev ter dodatne slike in informacije v skupni mapi. Rodpforxubwox Ag Tjp

Stanje: dober (rabljeno), Koda: 0136 Znamka: ITALPRESSE Model: FORMATIC 20.9 Hidravlična membranska stiskalnica Obojestransko lepljenje furnirja na panele, ki so na eni strani oblikovani ali profilirani, na drugi pa ravni – za lepljenje vhodov na omarice, čelne stranice predalov, pisalniške in konferenčne plošče, kuhinjske delovne plošče ipd. 3D lepljenje plastičnih folij (PVC, PPE, ABS, transfer folije) na panele, ki so oblikovani ali profilirani na eni strani – za izdelavo vrat omaric, čelnih stranic predalov, pisalniških in jedilnih površin, kuhinjskih pultov, prodajnih pohištvenih elementov, notranjih vrat itd. Dimenzije plošče: 2000 x 900 mm Razmak (daylight): 325 mm Hod cilindra: 325 mm Grelec – električni kotel: 27 kW Tlačna sila: 300 ton Število tlačnih cilindrov: 3 Moč hidravlične enote: 5,5 kW Rjdpfx Aspbvqvsg Tep Manometer za kontrolo tlaka Avtomatska ponastavitev tlaka Časovnik odpiranja Skupne dimenzije (DxŠxV): 3300 x 1400 x 2400 mm Teža: 8100 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. Rsdpsmhhf Ssfx Ag Top When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: rabljeno, Paint finishing line consisting of: Item 1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed speed adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035 Item 2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller conveyor - Air blast channel, top 2 pcs. - Air blast channel, bottom 1 pc. - Deburring brush - With ionizing bar from above - With ionizing bar from below - With its own drive - With its own control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction stub diameter: 180 + 120 mm - Total connected load: 7.6 kW - Voltage, Hz: 400/50 Item 3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual gun drive - Dry extraction - Extraction stub diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Feed speed steplessly adjustable ~ 4-10 m/min - Belt cleaning system - Paint recovery via V-belt system Rodpfx Aov I Akvsg Tsp - Spray gun control: EPS-CNC CNC 7000 - Color management system for 3+1 pumps - Number of installed airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at machine outfeed - Exhaust air recirculation system - Extraction fan exhaust air control - Suitable for water-based paints - Suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: approx. 20 - 26 kW - Voltage, Hz: 400/50 - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small quantity container - Gun carrier arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatic and material hoses. Item 4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed speed adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035 Item 5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of trays: 30 pcs. - Tray length: 5,600 mm - Usable tray length: 5,300 mm - Load capacity per tray: 300 kg - Max. part height: approx. 110 mm - Clear height between trays: 120 mm - Dimension: tray center to tray center 3,658 mm - Max. part length: approx. 5,200 mm - Number of controllable temperature zones: 2 pcs. - Supply air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Heating capacity max.: 175 kW - Max. drying temperature: approx. 55 - 60°C - With heat exchanger, heating water - Without heating water control valves - Pass-through direction: U-shape - Infeed side: right - Feed speed via frequency control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: approx. 23 kW - Voltage, Hz: 400 / 50 - Voltage fluctuation max. +/- 5 % - Without control valves and water pumps Item 6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed speed adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035

Stanje: rabljeno, številka stroja/vozila: 007928, Pozicija 1: Krtačni stroj CEFLA-EASY 2000 + TR2V-FV3 Pozicija 2: Lakirni stroj CEFLA-EASY 2000 + TR2V-FV3 Pozicija 3: Sušilec laka CEFLA-EASY 2000 + TR2V-FV3 Redowu Ackjpfx Ag Tjp