Obdelovalni center

MAKA Maka HC57R

Stanje: rabljeno, številka stroja/vozila: 008337, Delovno območje os X: 3060 mm Delovno območje os Y: 1260 mm Delovna površina: Z vakuumskimi konzolnimi podlagami Moč glavnega vretena: 12 kW Število krmiljenih osi: 4 osi Število vrtalnih vreten: 21 Število mest za orodja: 10 Pedpox A Tlpofx Adyjgg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, MAKA BC 150t compact, used machine 5-axis CNC machining center for processing aluminum and plastic. Gantry-type bridge construction with 4 columns, 2 x aggregate carriers. Technical Data: Working areas in 5-axis operation, with tool Ø 160 mm / tool length 160 mm: 2 x each: Y-axis: 1,500 mm X-axis: 2,500 mm Z-axis: 650 mm (with 180 mm fixture height) Linkable tables for machining large parts. Extended travel stroke for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Rotary axis 540° / Swivel axis 196° (+/- 98°) Table design: - 2 x aluminum surface tables, size 2,500 x 1,500 mm - Threaded bushings M10 and centering pins in the tabletop - 3 x vacuum clamping circuits per table - 3 x pneumatic clamping circuits per table Milling units: - 2 universal aggregates for 5-axis milling, with 50° angle head, HSK F63 tool holder, max. power 12.5 kW (S1), infinitely variable speed up to 24,000 rpm, water-cooled milling spindle - 1 NC height-adjustable chip extraction system per milling unit, with lamella curtain Tool changer: - 2 x rotary disc tool magazines with 20 positions each Control system: - 1 x Siemens SINUMERIK 840D SL machine control - 1 x Siemens OP 19 PCU operator panel with 19" display, full keyboard, membrane keypad - 1 x additional Siemens HT 8 portable handheld operating unit with 7.5" touchscreen, version with manual pulse generator Podpfetq Hkrex Adyjgg Safety equipment: - 1 soundproof enclosure - 2 automatic loading doors with viewing windows - Loading and unloading areas safeguarded by light barriers and bumpers on the tables Measuring probes: - 2 x 3D radio measuring probes, HSK F63 interface, for automatic changing from the tool magazine Minimum quantity lubrication: - 2 minimum quantity lubrication units - 2 spray nozzles per milling unit, individually controllable via M-function Table air blow-off system: - 2 x air knife table blow-off systems for cleaning the tables during traverse out of the machining area (limited in coupled operation) The machine is installed and can be inspected in 89568 Hermaringen.

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for processing wood, plastic, and aluminum. Gantry design machine with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical specifications: CNC control BWO Vektor 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (top edge of vacuum cups) Working areas in 3-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum cups) A-axis: 540° (rotary axis), B-axis: 196° (swivel axis +/- 98°) Rapid traverse speed: X/Y axis 45 m/min, Z axis 15 m/min, A/B axis 10,000°/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, max. power 12.5 kW, steplessly adjustable speed up to 17,000 rpm, milling spindle water-cooled. - 1 CNC height-adjustable chip collection system with lamellar curtain. Tool magazine: - Tool interface ISO 40 for automatic tool change system. - 2 chain tool magazines with 32 positions each for tools up to D = 90 mm, with sorted storage up to max. 160 mm (three positions required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for stops "raise/lower" - 2 control circuits for pneumatics "clamp/release" - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 2 stepped separating devices, lift approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor integrated into the base frame for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! Vacuum supply: - 1 vacuum pump including a 250-liter tank for rapid vacuum build-up. - approx. 20 vacuum supports with various suction plates. - 4 stops raise/lower for positioning components. Pedpfxjvmpx Ro Adyjgg Miscellaneous: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser. Occupational safety: - Traveling safety cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axes to a new generation of drives (digital). - New energy chains for Y / X / Z axes. - Complete rewiring, all power and measuring system cables replaced. - All guide carriages replaced. - Z-axis ball screw and guide rails new. - X-axis guide rail new. - Control system conversion to BWO Vektor 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 tool magazines + tool changers overhauled. - Swivel extraction unit overhauled. Software: - It is possible to include a current version of the COMPASS stair construction software. Compass is the leading provider for planning and manufacturing of wooden staircases.

Stanje: dober (rabljeno), Leto izdelave: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact design with integrated control cabinet in the machine base frame. CNC control unit BWO 900C, 1 MB memory, with integrated PC. Technical Data: Working areas / travel dimensions: With tool length 130 mm and diameter 60 mm X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 300 mm (with fixture height 120 mm) A-axis: 540° B-axis: 200° (+/- 100°) Rapid traverse speeds: X/Y-axis: 45 m/min Z-axis: 15 m/min A/B-axis: 10,000 °/min Pgjdpfx Adjir Aq Teyeg 1 high-speed milling spindle HSD 6.8 kW, continuously variable speed control from 2,000 – 24,000 rpm, nominal power from 12,000 rpm. With ceramic bearings, air-cooled. Tool holder SK 30 with automatic tool changer. 1 moving drum-type tool magazine for 10 tools up to Ø 60 mm and – depending on tool diameter – 130 mm length from reference face. Aluminum table plate 1,000 x 1,000 mm with grid bores 1 vacuum pump 54 m³/h, 1 x vacuum clamping circuit Automatic central lubrication, Control cabinet with air conditioner. Occupational safety: Sliding door for front loading, safety enclosure at the machine rear, with side access door, enclosure is open at the top. Connections: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz The use of an RCD (Residual Current Device) in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 18 m³/h No tool holders or machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2005, Used machine MAKA PE 70 5-axis CNC machining centre for working wood and plastics. Machine in gantry design, with rack and pinion drive. Year of manufacture: 2005 Technical Data: CNC control BWO 920 for 5-axis machining. LCD display 10.4" 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 mm / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cups) Working areas in 3-axis operation, with tool diameter 60 mm / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cups) A-axis 540° (rotary axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse X/Y-axes 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° angle head, power 7.5 kW (S1) 10 kW (S6), infinitely variable speed up to 22,000 rpm, milling spindle HSK-F63, water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - Tool interface HSK-F63 for automatic tool changer system. - 1 horizontal drum magazine with 20 tool spaces for tools up to D = 90 mm, with sorted placement up to max. 160 mm (three spaces required for this). Machine table: - 10 support tubes on linear guides with pneumatic release for quick positioning. - 2 x control circuits for stops "raise / lower" - 2 x control circuits for sliding rail "raise / lower" - 2 x control circuits for pneumatics "clamp / release" - 2 x vacuum control circuits with buttons for clamping and automatic reset via CNC programming. - 1 chip conveyor integrated in the base frame, for removal of chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine equipped with vacuum system. - 2 x vacuum clamping circuits Podpfxsvr A A Ts Adyegg - 1 vacuum pump, suction capacity per pump approx. 130 m³/h, with reservoir. - Vacuum supports with various suction pads. Other features: - Automatic central lubrication. - Control cabinet with air conditioning unit. Workplace safety: - Moving protective cabin with safety bumpers on the operator side. Repairs / maintenance prior to delivery: - Service performed. - Lamella curtain at gantry new - Sliding window new - Energy chain Y-axis new - Energy chain Z-axis new - Various cables and air hoses replaced.

Stanje: rabljeno, Leto izdelave: 2011, Naprodaj CNC obdelovalni center profit H20 Format-4 Felder - 2011. Stroj je v stalni uporabi, trenutno je mogoče preveriti njegovo delovanje med delom! 3-osni center s pripravljenostjo za 4. os. Obdelovalno območje 1250x3150 mm, višina Z=100 mm, možnost dela na dveh delovnih površinah. Leta 2024 je bil obnovljen elektro vreteno. Vsa popravila in vzdrževanja so bila izvedena s strani usposobljenega servisa. Zagotovimo nakladanje. Prevoz na strani kupca – tovorno vozilo z dolžino kesona 7-8 m. Pogoji za priključitev stroja: Pgsdpfoxg Ehdex Adyjg -Električni kabel 5x4mm2 s priključkom, ki ustreza vtičnicam v delavnici -Električna zaščita (najmanj) 32A industrijska, izbrana glede na moč motorjev. Splošno pravilo: nazivni tok na stroju (tablica) + 40 % -Pnevmatski priključek z notranjim premerom min. 12 mm -Kompresor z zmogljivostjo vsaj 100 l/min -Odvodna napeljava Izdajamo račun z DDV Naveden znesek je neto. Za vprašanja nas prosimo kontaktirajte po telefonu ali e-pošti.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Used Machine MAKA PM 270 R 5-Axis CNC Machining Center for processing wood, plastic, and aluminum. Gantry design with rack and pinion drive. Year of manufacture: 2001 Technical Data: CNC control BWO 900C for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile operator console stand. Working areas in 5-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cups) Working areas in 3-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cups) A-axis 540° (rotary axis), B-axis 200° (swivel axis +/- 100°) Rapid traverse X/Y-axis: 45 m/min. Z-axis: 24 m/min. A/B-axis: 10 m/min. Pgedpevmywqefx Adyeg Milling Unit: - 1 universal unit for 5-axis milling with 50° angled head, max. output 12.5 kW, infinitely variable speed up to 17,000 rpm, spindle water-cooled. - 1 NC height-adjustable chip extraction system with lamellar curtain. Tool Magazine: - Tool interface ISO 40 for automatic tool changing system. - 1 chain-type tool magazine with 32 slots for tools up to D = 90 mm, sorted storage up to max. 160 mm (three slots required). Machine table: - 10 support tubes on linear guides with pneumatic release device for rapid positioning. - 2 control circuits for stops "raise / lower" - 2 control circuits for slide bar "raise / lower" - 2 control circuits for pneumatics "clamp / release" - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 1 chip conveyor integrated into the base frame for transporting chips and small offcuts up to approx. 100 x 100 x 100 mm. Tools: Tools are not included! Delivery can include various tool holders upon agreement. We would be pleased to provide you with a separate offer. Vacuum System: - 1 vacuum pump, approx. 140 m³ suction capacity, including 250 L tank for rapid vacuum build-up. - 10 vacuum supports with various suction pads. - Various clamping devices for posts and curved elements. - Stops raise / lower for workpiece positioning. Miscellaneous: - Automatic central lubrication system. - Control cabinet with climate control unit. - Projection laser Occupational Safety: - Moving protective cabin with safety bumpers on the operator side.

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, MAKA ECM 27 R Year of manufacture: 1998 • High-performance CNC machining center for 5-axis operations, ideal for aluminum processing and mold making. • MAKA ECM 27 R in portal design. • Equipped with automatic central lubrication system and control cabinet with air-conditioning unit. • CNC control BWO 900C, 1 MB memory, integrated PC. • Portable control panel BWO RC 910. Technical data: Working areas / working envelope (cube): With tool length 130 mm and Ø 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm (with fixture height 170 mm) A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Pedpfxot Dl U Ej Adyegg Rapid traverse speeds: X/Y axis: 40 m/min Z axis: 15 m/min A/B axis: 10,000 °/min 1 pc. milling spindle 11 kW, Variable spindle speed from 2,000 – 17,000 rpm, With ceramic bearings and liquid cooling. Tool holder SK 40 with automatic tool changer. 1 pc. chain-type tool magazine for 12 tools up to Ø 160 mm, including 2 positions for angular drilling heads (fixed-position coded), SK40. 1 pc. steel surface table 3,000 x 2,250 mm with T-slots. 1 pc. vacuum pump approx. 140 m³/h, with 250-liter tank. 1 pc. vacuum clamping circuit. Work safety: With safety enclosure for the rear of the machine, side access door, cabin open at the top. Lamella curtain on operator side and safety bumper on the front of the table. Repairs / refurbishment before delivery: - Maintenance. Electrical connection values: Voltage: 400 V (max. +/- 5%), Frequency: 50 Hz Rated power: 22.5 kW Use of an RCD protective device in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 10 m³/h No tool holders and machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee. Optional: Including installation and commissioning with handover ready for production!

Stanje: dober (rabljeno), Leto izdelave: 2000, Maka MM 7 T / 5 axes, Pgedpfx Aswuy Ahedyog Year of manufacture: 2000, Control: Siemens 840 D, Travel X/Y/Z: 2x1500/2000/600 mm, Gantry milling machine for light machining, Milling spindle: 7.5 kW, NC milling head A-axis: 540°, B-axis: +/- 100°, Tool changer: 10-fold, HSK F 63 tool holder, Saw blade Ø max. 170 mm, Spindle speed up to 24,000 rpm, X/Y axis rack and pinion, Z axis ball screw, Vacuum table, Aluminium flat table,

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Travel paths X/Y/Z: 12,100 mm / 2,350 mm / 800 mm, A-axis swivel: +/-98°, Rapid traverse X/Y/Z/A: 45 / 45 / 24 / 10 m/min, Machining length: 11,000 mm, Spindle speed: 24,000 rpm, Table: 10 support traverses, 2 hydraulically swiveling workpiece stops, Control: BWO 930, Operating hours: 23,792 h, Dimensions X/Y: 18,300 mm / 6,250 mm. Includes travelling gantry design with dual-sided gantry drive, coolant spray system with minimal-quantity fine atomization. Documentation available. Podpfx Astqfqxsdyjgg