Zgornji Podporo nakup rabljenega (675)

Stanje: dober (rabljeno), Upper support Base plate 300 x 320 mm Bolt circle diameter 265 mm Centering collar diameter 100 mm Cedpfx Apeb E Nw Ielorb Distance from base plate to tool holder 185 mm

Stanje: dober (rabljeno), Upper support Credpfob Eyb Aex Aplob Dimensions: L.530 x W.270 x H.350 mm

Stanje: dober (rabljeno), Upper support Bolt circle 180 mm Depth 230 mm Width 600 mm Cjdeccrqfepfx Aplorb Height 460 mm

Stanje: rabljeno, Sandingmaster zgornji kalibracijski stroj z valjem in blazinico Codpfx Apowzavnsljrb

Stanje: rabljeno, Siat SM26 Zgornji in spodnji lepilnik, popolnoma opremljen z vstopnimi in izstopnimi valji. Največja višina škatle: 110 cm. Največja širina škatle: 50 cm. Codpfx Asya Emusplorb

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type TR450 The spray-rotation cleaning system type TR450 is an automated cleaning and degreasing unit featuring a lid that opens easily upwards. The system is designed for cleaning single parts and/or bulk materials in baskets sized LxWxH 520x320x200h mm. During the cleaning process, the basket must be closed with a lid. The cleaning result depends on a slight tumbling motion of the parts within the basket when cleaning bulk material; the fill level in the basket must be observed accordingly. Additionally, the unit is equipped with a flood tray beneath the goods basket, allowing for immersion rinsing of the parts, thereby achieving an even better cleaning result. Including the following features: • Fully made of stainless steel 1.4301, inside and outside • Level monitoring and automatic fresh water refill • Full system insulation • Hot air drying (power: 11.6 kW) • Steam vapor extraction • Oil skimmer for bath maintenance Cedpjfbt Sisfx Apljrb • Automatic fresh water refill • 1 small parts basket, 520x320x200h mm, mesh size: 6x6 mm, with height-adjustable locking lid Connected load: approx. 20 kW (32 amp plug)

Stanje: rabljeno, Spodnji in zgornji vrtalni stroj, nagibni, za sedišča stolov tipa Old America ali podobne izdelke št. 4 neodvisne spodnje nagibne skupine Crsdpfsytr Edsx Aplob št. 2 zgornji navpični nihajni skupini

Stanje: rabljeno, Leto izdelave: 2006, Liebherr zgornje-vrtljivi stolpni žerjav 180 EC-H 10 Litronic – doseg 60 m, nosilnost 10 t; 45.456 Zgornje-vrtljivi stolpni žerjav z Litronic upravljanjem, ponujen kot zgornji del brez stolpa. Proizvajalec: Liebherr Model: 180 EC-H 10 Litronic Leto izdelave: 2006 Tovarniška številka: 45.456 Doseg: 60,0 m Maksimalna nosilnost: 10000 kg Nosilnost pri 60 m: 2200 kg Izvedba: zgornji del žerjava (brez stolpa) Upravljanje: Litronic Dolgost iztega in višina kljuke lahko po dogovoru povečamo! Crodpfjyy I R Dsx Apleb

Stanje: rabljeno, Leto izdelave: 2006, Liebherr Obendreherkran 180 EC-H 10 Litronic – doseg 40 m, nosilnost 10 t, serijska številka 44.997 Zgornjeobratni stolpni žerjav z Litronic krmiljenjem, ponujen kot zgornji del žerjava brez stolpa. Proizvajalec: Liebherr Model: 180 EC-H 10 Litronic Serijska številka: 44.997 Leto izdelave: 2006 Doseg: 40,0 m Največja nosilnost: 10.000 kg Nosilnost pri 40 m: 4.750 kg Izvedba: zgornji žerjav (brez stolpa) Krmiljenje: Litronic Crsdpfxoyy I Ivj Aplsb Možno podaljšanje iztega po dogovoru!

Leto izdelave: 2022, stanje: novo, -1- unused top cover for impact mill SBM 12/12/4 RHS Cedpfx Apou Spmpelorb

Stanje: rabljeno, Length each: 2045 mm Crjdpfx Aocbnwcepleb (1 tool with light, 1 tool with heavier rust pitting)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 6 meseci, Preț disponibil pentru configurația de mai jos: Top Freezer AHT Kinley sau Epta 250, combinat cu vitrină orizontală AHT Miami (ne-recondiționată, dar testată și completă cu grilaj interior – rafturi și separatoare), garniturile capacului de sticlă schimbate. Fun Ice SRL este reprezentant AHT în România de peste 25 de ani Revânzător autorizat de echipamente noi și second-hand AHT Livrare rapidă, la nivel global AHT Kinley 210/250 cm (poate fi folosit ca vitrină frigorifică sau congelator, temperatură medie și joasă) !!! Sistem la cheie, complet testat (bază + 2 rânduri de rafturi) Agent frigorific ECO R290 Pregătit pentru conectare, instalare facilă Iluminare LED internă (canopy LED și iluminare uși cu LED) Unități disponibile aleatoriu pe stoc – Top freezere AHT Kinley / Epta sau Carrier, 210 cm și 250 cm lungime Credperhwuwefx Aplob Se pot combina cu vitrine AHT Miami sau Athen XL LED (pe stoc în Oradea, România) Toate echipamentele recondiționate din seria AHT EQ beneficiază de garanție 6 (șase) luni pentru piese, cu excepția materialelor consumabile și de uzură (agent frigorific, garnituri, lămpi neon etc.) Accesorii și piese de schimb disponibile pe stoc

Stanje: rabljeno, Load capacity: 990 kg Beam length: 7,880 mm Usable carrier length: 7,480 mm Cedpfx Apjvgw Rujljrb Lifting core: 5,700 mm Without sidecar!!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Opis sledi Credpfx Apjxzk Nceljb

Stanje: rabljeno, Leto izdelave: 2015, Overview The Zalkin capping head is made of stainless steel and features 22 capping heads. The running direction is from left to right (clockwise). It is equipped with an electronic height adjustment. The unit is designed to process 28 mm aluminum caps. The maximum output is 36,000 bottles per hour. Technical data: - Pitch circle diameter: 731.11 mm - Number of capping elements: 22 Cjdpfx Aol Hxzkjplorb - Pitch: 104.4 mm - Direction of travel: left to right (clockwise) - Material: stainless steel - Electronic height adjustment - Closures: 28 mm aluminum screw caps Accessories: - Six new capping elements - Cap sorting unit - Spare parts lists and technical documentation

Stanje: rabljeno, Leto izdelave: 1987, Rabljeni stroj Letnik izdelave: 1987 Stanje: servisno pregledano Izvlek stebra: 750 mm Hod vretena: 100 mm Največja razdalja med mizo in vretenom: 310 mm Hitrost vretena: 10.000/20.000 vrt/min Moč motorja: 2,2/3,3 kW Pritrditev orodja s napenjalno vpenjalno pušo Z upihovalno napravo preko priključka na stisnjen zrak Zunanje mere: 905 x 1380 x 1600 mm Codpfx Apsw I U Udjlsrb Teža: 533 kg Razpoložljivost: po dogovoru Lokacija: Hochheim

Stanje: rabljeno, Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, master jaws - Top jaws: for three-jaw chucks, soft - Jaw width: 20 mm Cjdpfx Apstigxbslsrb - Dimensions: see photos - Overall dimensions: 85/60/H40 mm - Total weight: 1.0 kg

Stanje: dober (rabljeno), Zgornja podporna vozička, zgornji sani, lastovičji rep vodilo, voziček za orodje, križna miza, vreteni pogon za zgornjo podporo Crjdpfsxfzuwsx Apljb -Vreteni pogon: za zgornjo podporo -Trapezna vretena: Ø 20 mm -Mere: glej fotografije -Skupne mere: 450/155/H110 mm -Teža: 5,4 kg

Stanje: rabljeno, Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, solid jaws - Interchangeable jaws: 3-piece soft top jaw set - Width: 20 mm - Overall dimensions: 84/60/H40 mm - Total weight: 1.1 kg Codpfx Apjtff Avelorb

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 15 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload Credpsw Sld Rofx Aplsb * All rolls are driven by hydromotor and planetary gearbox * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with mobile control panel * Lower rolls’ positions can be easily read via two digital displays * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Rolling system with roller bearings and conical mechanism * Hydraulic balancing system for parallel movement of the shafts * Extended shaft ends to allow installation of section and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (hoist) support for large diameter bending operations * Hydraulic side supports for large diameter bending operations * Ground and polished rolls for special applications * Section bending rolls for profiles * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of the shafts TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 10/13 mm Bending: 13/15 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 5150 mm Width: 1500 mm Height: 1550 mm Weight: 9050 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 150 mm, premer stranskega valja: 130 mm, delovna širina: 2.050 mm, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 6 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic upper roll opening head - Mobile control panel - Centrally driven rolls powered by motor - Hydraulic up/down movement for rear and lower rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Lower and upper roll drive by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High-strength forged steel rolls made from certified SAE 1050 (CK45) steel - Hardened shafts - Digital readouts (2 units) - Operating manual OPTIONAL EQUIPMENT - Overhead crane for support during large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at shaft ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system - Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Crodpfsxw D Udjx Apljb Rolling Capacity: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 3, premer spodnjega valja: 300 mm, premer zgornjega valja: 300 mm, premer stranskega valja: 280 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 22 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary reducer * The hydraulically opening head allows for easy removal of bent workpieces Crsdpfx Apjw Slg Soljb * Very easy operation with movable control panel * The position of the lower rolls can be easily read via two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with bearings * Hydraulic balancing system for parallel movement of the shafts * Extended shaft ends for mounting profile or pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special work * Rolls for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel movement of the shafts TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16/20 mm Bending : 20/22 mm Upper & Lower Roll : 300 mm Side Roll : 280 mm Motor Power : 11 kW Bending Speed : 5 m/min Length : 4100 mm Width : 1500 mm Height : 1550 mm Weight : 7400 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 550 mm, premer zgornjega valja: 550 mm, premer stranskega valja: 450 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, moč: 70 kW (95,17 KM), trajanje garancije: 12 meseci, Oprema: kaljeni valji, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, STANDARD EQUIPMENT * The bottom and side rolls are hydraulically operated with pistons attached to the frame, providing linear up-and-down movement * Protected against overload * The top and side rolls are driven by hydromotors and planetary gearboxes (three-roll motor drive) * The positions of the rolls are easily read with three digital indicators * Hydraulic opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation via movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) Cjdexbzptopfx Apljrb * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operating system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending Thickness : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 250 mm, premer zgornjega valja: 250 mm, premer stranskega valja: 200 mm, dolžina valja: 2.050 mm, najv. debelina pločevine: 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Highly suitable for bending round and various diameter materials Lower roll and side rolls move hydraulically up and down in direct linear motion Protected against overloading The top roll is driven by an electric motor and planetary gearbox. The lower roll is driven by a cardan coupling system. Two rolls are driven The positions of the rolls are easily read with three digital displays The piece can be easily removed thanks to the hydraulically opening head Very easy operation with the mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of the rolls Complies with EU safety regulations and bears the CE mark Operating manual OPTIONAL EQUIPMENT Remote assistance via NC control Overhead crane (elevator) for support during large diameter bending Hydraulic side supports for support during large diameter bending Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Crodsw Slxzepfx Aplob Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 350 mm, premer stranskega valja: 260 mm, dolžina valja: 2.550 mm, najv. debelina pločevine: 25 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Roll positions can be easily read with three digital readouts * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC automation control * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending Codpfx Aow Smb Roplsrb * Hydraulic sheet removal system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length : 2550 mm Pre-bending : 16/20 mm Bending : 20-25 mm Upper & Lower Roll : 350 mm Side Roll : 260 mm Motor Power : 23.5 kW Bending Speed : 1.5 - 5 m/min Length : 4850 mm Width : 1900 mm Height : 1950 mm Weight : 12800 kg