Yudo Cw 662 nakup rabljenega (350)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The hot runner device CW 662 is a 6-cavity unit by YUDO that is available for sale, and of course, comes with an operating manual for the device. Cgjdpfxev Smmcj Ahxot

Leto izdelave: 2025, obratovalne ure: 3 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Laser za čiščenje – kontinuirni CW 3000 W. Namenjen je zahtevnim industrijskim aplikacijama, kjer so potrebni moč, hitrost in robustnost procesa. Primeren za: – odstranjevanje olj in maščob s kovinskih delov Cjdpey Iv Tcjfx Ahxjgt – odstranjevanje barve in korozije s kovinskih konstrukcij – čiščenje jeklenih nosilcev, platform in rezervoarjev – čiščenje zvarnih spojev pred IBR kontrolo – remont industrijske opreme Lastnosti: – kontinuirni fiber laser 3000 W (CW) - laser proizvajalca Raycus - kabel dolžine 10 m - laserska pištola SUP 22C - teža 200 kg - kolesa za enostavno premikanje naprave - vodno hlajenje - industrijski čiler prostornine 16 L - CE označba - stabilna temperatura pri dolgotrajnem delovanju – visoka učinkovitost čiščenja in stabilno delovanje – industrijski razred, namenjen vsakodnevni uporabi – možnost mobilne ali stacionarne uporabe CSI Support ekipa nudi tehnično podporo ter usposabljanje za delo v našem centru za lasersko čiščenje. Svetovanje in priprava varnostnih postopkov za delo na prostem in v zaprtih prostorih.

Stanje: rabljeno, Krožeči medij 25 °C Hladilna zmogljivost 10 kW Električna priključna moč 5,45 kW Obratovalna/krmilna napetost 400-415/24 V / 50 Hz Nazivni tok / maksimalno varovalo 15,2 / 25 A Po naši oceni so temperirne enote v dobrem rabljenem stanju. Codpfjy Erz Dex Ahxsgt Ponudba zajema 2 kosa. Dodatna oprema, prikazana orodja in vpenjalni pripomočki so vključeni v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do vmesne prodaje!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, številka stroja/vozila: 52180, - Type: TB-21.65/J35 - Width: 620 mm - Weight: 550 kg - Capacity: 0.43 m³ Cedpovvaq Nefx Ahxsgt - Coupling: CW 30/40

Stanje: zelo dobro (rabljeno), Toyo Jidoki TT9-CW – Redek, dvopasovni stroj za polnjenje in zapiranje vrečk, primeren za stoječe vrečke z odtrgalnim pokrovom. Odlično ohranjen, neposredno iz obrata z najvišjimi higienskimi standardi. Odličen za pakiranje omak, mlečnih izdelkov, otroške hrane, pripravljenih obrokov ipd. Codpeyzi Igjfx Ahxegt

Stanje: zelo dobro (rabljeno), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber allows for the assessment of the function or material properties of test objects under the influence of temperature and humidity. Excellent air circulation with a correspondingly high recirculation rate ensures effective transfer to the test specimen. The air treatment section is located at the rear of the interior chamber. The technical units are housed behind the chamber in a separate frame and are easily accessible. The control system is located in a separate switch cabinet, with the operator panel integrated into the cabinet door. For dehumidifying the test chamber, the unit is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time Cgedpex Eabpjfx Ahxjt - Temperature change rate (linear, with test specimen and radiant heating, measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time All technical data refer to an ambient temperature of +25 °C, nominal voltage of 400 V, without any test specimen, irradiation, or additional equipment. Dimensions: Interior (test chamber / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm; Width: 1600 mm; Depth: 1550 mm - External dimensions: Height: 2800 mm; Width: 2250 mm; Depth: 5000 mm Operating Data: - Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Design: Refrigeration unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes: - Inspection by appointment (46325 Borken) - Shipping by freight carrier possible – costs & arrangements on request - Scope of delivery: (see picture) (Subject to changes and errors in technical data and information!) Further questions can gladly be answered by phone.

Stanje: zelo dobro (rabljeno), CTS CW-60/5.5 – Climatic Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description The climatic test chamber enables the testing of the functionality or material properties of test items under varying temperature and humidity conditions. Efficient air circulation with a high recirculating air volume ensures optimal heat and moisture transfer to the test specimens. The air conditioning unit is located at the rear of the inner chamber. Aggregates are situated behind the chamber on a separate frame and are easily accessible. The control system is housed in a separate electrical cabinet, with the control panel integrated into the cabinet door. For dehumidifying the test area, the chamber is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied to the test area via a blower for purging purposes. Technical Performance Data: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Rate of temperature change (linear, with test items and heat radiation measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, nominal voltage 400 V, without test items, radiation or additional equipment. Dimensions: Internal dimensions (test / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Features: - Cooling unit: water-cooled, low noise, semi-hermetic, stepless power adaptation via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404A Additional Information: Cgodpfx Ahjx Eaxbsxjt - Viewing by appointment (46325 Borken) - Shipping via freight carrier available – cost & organization upon request - Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/5.5 – Climate Test Chamber, Water-cooled The CW‑60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description: With this climate test chamber, the functionality and material properties of a test object can be evaluated under the influence of temperature and humidity. The chamber features efficient air circulation and a high recirculation volume, ensuring optimum transfer to the test item. The air handling system is located at the rear of the interior chamber. Major components are mounted in a separate frame behind the unit for easy access. Control equipment is housed in an independent control cabinet, with the operator panel installed in the cabinet door. To ensure dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. Additionally, the test area can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K (over time) - Temperature change rate (linear, with test specimen and radiant load, measured at air inlet): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±1% to ±3% rH (over time) Technical data refer to ambient temperature of +25 °C, nominal voltage 400 V, with no test specimen, no external radiant load, and without additional equipment. Dimensions: Internal (test or usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection rating: IP 54 Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, environmental-friendly refrigerants R 23 / R 404 A Notes: - Viewing by appointment (46325 Borken) Cgedpfsx D Abpsx Ahxet - Shipping by freight forwarder possible – costs and arrangements upon request - Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/11 – Water-Cooled Climate Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for carrying out temperature and humidity tests on multiple test specimens simultaneously. Device Description The climate test chamber enables the functionality or material properties of a test specimen to be tested under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculated air volume ensures optimal transfer to the test specimen. The air treatment system is located at the rear of the internal chamber. The equipment aggregates are located behind the unit in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is built into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test room can be flushed with fresh air via a blower. Technical Data: Temperature testing: Temperature range: –60 °C to +90 °C Temperature deviation: ±0.5 to 1 K over time Spatial temperature deviation: ±1 K at 200 mm wall clearance Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic testing: Temperature range: +10 °C to +95 °C Humidity range: 10% to 95% RH Dew point range: +5 °C to +89 °C Temperature deviation: ±0.5 K over time Humidity deviation: ±2 – ±5 % RH over time Without radiant heat In stabilized condition The technical data refer to an ambient temperature of +25 °C, nominal voltage of 400 V, without test specimens, without radiation, and without additional equipment. Dimensions: Internal dimensions (test room / usable space): Volume: approx. 11,000 liters (11 m³) Internal dimensions (approx.): Width: 2,100 mm Depth: 2,530 mm Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm Depth: 5,200 mm Height: 2,520 mm (may vary based on doors, frame, accessories, etc.) Operating data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Technical Specifications: Refrigeration unit: Water-cooled, low-noise, semi-hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Cgsdpfex Anipox Ahxet Notes: Inspection by appointment possible (46325 Borken) Shipping by freight carrier possible – costs & organization on request Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, širina transportnega traku: 635 mm, skupna širina: 2.000 mm, skupna dolžina: 1.175 mm, skupna višina: 1.380 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 03/2027, električna varovalka: 16 A, leto zadnje generalne obnove: 2026, širina odpiranja: 45 mm, delovna širina: 635 mm, vrsta vhodnega toka: trifazni, Kombiniran stroj za valjanje testa WLS Juwel Model: 16 CW za vse vrste testa za valjanje in listanje enostavna, brezstopenjska nastavitev valjev Izvlečna miza iz nerjavečega jekla levo in desno Plošča za pritisk z ročnim nastavljanjem Spodnji dolgi valj/oblikovalnik S transportnim trakom za prepognjene izdelke Zelo robusten stroj za valjanje testa S posodo za moko Priklop 400V, vtikač 16A-CEE Rabljeni stroj, očiščen Z garancijo in servisom rezervnih delov Možnosti: Dostava Vzdrževalna pogodba Servisni paket Leasing & najem Codpjid Atwsfx Ahxogt Obiščite naš veliki center za pekarske stroje.

Stanje: novo, Digital technology: the NEOPULSE 400 CW is a three-phase pulsed MIG/MAG power source designed for heavy industry applications. Mobile and equipped with a cooling unit and a high-performance wire feed system, the NEOPULSE 400 CW is ideal for tackling the most demanding welding tasks. Its intuitive and functional digital interface allows for easy adjustment of all welding parameters. MULTIPROCESS WELDING MIG/MAG: - Steel and stainless steel wire: Ø 0.6 to 1.6 mm - Aluminium wire: Ø 0.8 to 1.6 mm - CuSi and CuAl wire: Ø 0.8 to 1.6 mm - Cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile and cellulose electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Cgsdpfx Aomxkggjhxjt Gouging (up to Ø 6.5 mm).

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Peripheral devices Cgsdpewuvh Hefx Ahxjt HB-THERM Type: HB-CW 90 4 units Year of manufacture: 1998-1999

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Transportne in dozirne naprave Cedpfx Ahed Twgcoxegt Blagovna znamka: A. Tschritter Tip: WC 100 Leto izdelave: 2004

Stanje: rabljeno, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Holp CutWheel / CW.149.140 / incl. MS10 mount / HARDOX / NEW / in stock & immediately available Price: €18,590.00 net / €22,122.10 gross - Excavator operating weight: 12 – 17 t - Own weight approx.: 670 kg - Cutting diameter in cutting direction: 3 – 50 mm - Cutting diameter in sawing direction: 50 – 200 mm - Cutting width: 1,360 mm - Cutting height above ground: 150 mm - Oil flow: 100 – 110 l/min - Hydraulic pressure: 180 – 200 bar - Recommended blade speed: 80 – 100 rpm Advantages of the Holp CutWheel: - Clean cut of all types of wood thanks to adjustable counter-blade - Significantly more efficient operation as less manpower and fewer machines are needed while maintaining high safety standards - Combines 3 work steps in one: cutting (3 mm to 50 mm), sawing (50 mm to 200 mm), and gathering cut material Cgsdjynrhzopfx Ahxot - Work heights up to 8.5 meters with a 10-ton excavator and up to 10 meters with a 15-ton excavator - Cutting wheel operates in both directions and effortlessly processes diameters from 3 mm to 20 cm - High durability (cutting wheel made from fine-grain steel) - Both cutting and sawing directions as well as diameter can be set from the cab, so work is not interrupted. This also enhances operational safety - Significant savings because the CutWheel on the excavator replaces a work platform—thus the CutWheel replaces various machines and even manual labor - Robust construction allows you to push material lying on the ground together, like using a broom - As the CutWheel does not saw, but separates wood fibers by squeezing in both directions, the wood fibers are not torn as with a conventional saw blade. This results in a smooth cut, preventing fungal infestation - Three hydraulic connections required: Double-acting service line for saw blades (cutting/sawing) 1x drain line We have many more Holp products in stock and immediately available! Mr. Herden (phone) will be happy to assist you. On request, we are also happy to offer you financing options. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles in stock, we are one of Germany’s largest commercial vehicle dealers. We supply the complete Holp range for you! Errors and prior sale excepted! New: Yes Net weight: 670 kg Part suitable for: Forestry applications Please contact us...

Stanje: rabljeno, For enquiries about the attachment, Mr Herden will be happy to assist you (by phone at ...). Holp CutWheel / CW.099.110 / incl. MS08 mounting / HARDOX / NEW / in stock & immediately available Price: €14,290.00 net / €17,005.10 gross - Suitable excavator weight: 7 – 11 t - Own weight approx.: 490 kg - Cutting material diameter in cutting direction: 3 – 50 mm - Cutting material diameter in sawing direction: 50 – 170 mm - Cutting width: 1,000 mm - Cutting height above ground: 100 mm - Oil flow: 50 – 60 l/min - Hydraulic pressure: 180 – 200 bar - Recommended blade speed: 100 – 120 rpm Advantages of the Holp CutWheel: - Clean cut on all types of woods thanks to the adjustable counter-blade - Significantly more economical work process as fewer operators and machines are required, while maintaining high work safety - Three work steps in one: cutting (3mm to 50mm), sawing (50mm to 170 mm) and gathering the cuttings - Operation at heights of up to 8.5 metres with a 10-ton excavator, and up to 10 metres with a 15-ton excavator - The cutting wheel operates in both directions and easily handles diameters from 3 mm to 17 cm - High robustness (cutting wheel made from fine-grained steel) - Cutting/sawing direction and diameter can be adjusted from the cabin, allowing continuous work and increasing operational safety - Significant cost savings, as the CutWheel attached to the excavator replaces an aerial work platform – eliminating the need for various machines and even manual work - The robust construction also allows for sweeping together material lying on the ground, similar to a broom - As the CutWheel does not saw but "crushes" wood in both directions, fibres are not torn as with conventional saw blades, resulting in a smooth cutting surface that helps prevent fungal infestation - Requires three hydraulic lines: Double-acting service line for blade cutting/sawing 1 x leakage oil return We have many other Holp products in stock and immediately available! Mr Herden (Tel. ...) will be happy to assist you. On request, we are happy to provide you with a financing offer. We are official Holp sales and service partner. We are official Gierking GMT sales and service partner. We are official OilQuick sales and service partner. We are official Weber MT sales and service partner. We are official Westtech sales and service partner. We are official DMS sales and service partner. We are official Seppi M. sales and service partner. We are official Magni telehandler sales and service partner. Cgjdpfx Aeynrhuehxst We are official JCB construction equipment sales and service partner. We are official Mercedes-Benz sales and service partner. We are official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the entire Holp programme for you! Errors and prior sale excepted! New: Yes Unladen weight: 490 kg Attachment suitable for: forestry applications Please contact...

Stanje: zelo dobro (rabljeno), CTS Type: CW-60/7 Walk-In Climate Test Chamber CTS Walk-In Climate Chamber 7 m³ Temperature & Humidity Testing -60 to 120°C Description: Cedpfx Ahsylxaxexjgt For sale: a professional CTS climate test chamber, type CW-60/7. This is a professional walk-in climate and temperature test chamber for use in industry, research, and quality assurance applications. The unit simulates extreme environmental conditions to test components, modules, or entire systems under realistic load scenarios. The climate test chamber enables: - Temperature tests from –60 °C to +120 °C - Climate tests with 10–95% relative humidity - Programmable temperature and humidity cycles - Endurance testing - Trend recording - RS232 / RS485 interfaces - Manual or automatic program operation Particularly suitable for: - Electronics testing - Solar modules (previous field of use) - Automotive components - Materials testing - Endurance/load testing The air circulation system ensures very uniform temperature distribution throughout the 7 m³ test chamber. Technical data: Temperature: –60 °C to +120 °C Change rate approx. 2 K/min Humidity: 10–95% rH Dew point range +5 °C to +89 °C Refrigerants: R404A/R23 Max. permissible pressure: 25 bar III.6 Quick guide Dimensions: Test volume: 7 m³ Walk-in design Internal dimensions: approx. 1,400 x 2,200 x 2,250 mm (W x D x H) External dimensions: approx. 4,990 x 1,851 x 2,500 mm (L x W x H) Power / Connection: 400 V, 3/N, 50 Hz Rated power: 43.1 kW Rated current: 67.5 A Protection class: IP 54 Weight: 4,000 kg Condition: used Scope of delivery: (see image) (All technical data and specifications are subject to change and error!) Please feel free to contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), CTS Model: CTS CW+40/7/7 Walk-In Climatic Chamber CTS Walk-In Climatic Chamber 7m³ Temperature & Humidity Testing 40–90°C Description: For sale is an industrial-grade walk-in climate and temperature test chamber CTS CW+40/7/7. The system is designed to simulate defined temperature and climatic conditions for the testing of materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, with either constant or programmable test cycles possible. High air circulation ensures uniform climate distribution throughout the test area. The walk-in design enables testing of large components or complete systems. Technical Data: Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial No.: 113011 Year of manufacture: 06 / 2011 Version: Walk-in climatic test chamber Test volume: 2 × 7 m³ Electrical Data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic Data: Temperature range: +40 °C to +90 °C Humidity range: 10% to 90% rH Dew point range: +30 °C to +87 °C Protection class: IP44 Cgedsylmamepfx Ahxst Internal Dimensions: Width: 1,400 mm, Depth: 1,300 mm, Height: 2,250 mm Total External Dimensions: Width: 3,511 mm, Depth: 2,765 mm, Height: approx. 2,515 mm Additional Technical Data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating elements Interior: Stainless steel Exterior: Coated steel sheet (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle operation possible Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2,000 kg Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors excepted!) Please feel free to contact us for further questions.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-19, lastna masa: 265 kg, največja dovoljena obremenitev: 1.085 kg, skupna masa: 1.350 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.550 mm, širina tovornega prostora: 1.330 mm, višina nakladalnega prostora: 430 mm, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, SARIS CW 255 133 1350 NEW VEHICLE Internal dimensions: 255cm x 133cm Sidewall height incl. railing: 43cm Loading deck height: 51cm Gross weight: 1350Kg Payload: 1085Kg Braked single-axle low loader Overrun brake and handbrake by AL-KO 1350Kg axle with brake Low-profile chassis Fully welded, hot-dip galvanized steel frame 15mm strong, robust phenolic plywood side walls Steel railing Rear tailboard foldable and removable, with tension latch 15mm strong, non-slip and robust phenolic plywood floor Jockey wheel 6 lashing eyes with 400Kg tensile strength 14" reinforced C-tyres 2x U-chocks M+S tyres Net/rope hooks on the frame 13-pin plug Front marker lights Rear lights with reversing light, rear fog light, and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Loading ramps - SARIS alloy wheels Codpfoghpbvsx Ahxjgt - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Mesh sides in various heights, also closed - Flat tarp, with or without bows - High cover, 150cm or 180cm - Rear supports More accessories available on request! Plus shipping to Gera and vehicle papers: €150 net Pictures are for illustration only and may show accessories subject to extra charge. Haven’t found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate collection. Our workshop is open on weekdays from 8:00 am to 5:00 pm for all kinds of repairs. Specialist for axle repairs, including for caravan trailers. Large selection of rental trailers. We also offer a wide range of spare parts and accessories for trailers of all makes. Get expert advice by phone, visit our website, or come by directly.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-19, največja dovoljena obremenitev: 1.105 kg, skupna masa: 1.350 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.050 mm, širina tovornega prostora: 1.330 mm, višina nakladalnega prostora: 430 mm, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, SARIS CW 205 133 1350 2 NEW VEHICLE Internal dimensions: 205cm x 133cm Side wall height incl. railing: 43cm Loading deck height: 52cm Gross weight: 1350kg Payload: 1100kg Braked single axle low loader AL-KO overrun and handbrake 1350kg axle with brake Low chassis Fully welded hot-dip galvanized steel frame 15mm thick, durable phenolic plywood side panels Steel railing Rear tailgate foldable and removable with tension lock 15mm thick, non-slip and robust phenolic plywood floor Jockey wheel 6 lashing rings with 400kg tensile force 14" reinforced C-rated tyres M+S tyres Net/rope hooks on frame 13-pin plug Front position lights Rear lights with reversing light, fog light and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Foldable and removable front panel - Loading ramps - SARIS light alloy wheels - Complete LED lighting - Anti-theft device - Fine-mesh or coarse-mesh net - H-frame - Mesh extensions in various heights, also as closed version Csdpjrk Ik Hofx Ahxogt - Flat tarp with or without bow - High tarp, 120cm - Rear supports Further accessories available on request! Plus shipping to Gera and vehicle registration document €100 net Images are examples and may show accessories subject to a surcharge. Haven’t found the right trailer yet? We have 50–100 vehicles permanently in stock and ready for immediate collection. The workshop is open weekdays 8:00–17:00 for all types of repairs. Specialist for axle repairs, also for caravan trailers. Large selection of rental trailers. We also offer a wide range of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come by directly.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW - 50, največja dovoljena obremenitev: 777 kg, skupna masa: 1.000 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.050 mm, širina tovornega prostora: 1.130 mm, višina nakladalnega prostora: 430 mm, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, SARIS CW 205 113 1000 1 NEW VEHICLE Internal dimensions: 205cm x 113cm Side wall height incl. railing: 43cm Loading platform height: 52cm Gross weight: 1000kg Payload: 777kg Braked single-axle low-loader Overrun brake and handbrake by AL-KO 1000kg axle with 1350kg brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm strong, robust phenolic plywood side walls Steel railing Rear drop-down and removable tailgate with tension latch 15mm thick, non-slip, robust phenolic plywood floor Jockey wheel 6 lashing eyes with 400kg traction load each 13" tires 2x wheel chocks Net/rope hooks on frame 13-pin plug Front position lights Rear lights with reversing light, fog light, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Foldable and removable front wall - Loading ramps - Complete LED lighting - Anti-theft lock - Net with fine or coarse mesh - H-frame - Mesh sides in various heights, also closed - Flat cover with or without bars - High cover 120cm, can be opened on all four sides Cgodpfx Aerk Ikqjhxst - Rear support legs Other accessories available upon request! plus shipping to Gera and vehicle registration document €100 net Pictures are for illustration purposes and may show optional accessories subject to an extra charge. Haven’t found the right trailer yet? We always have 50–100 vehicles in stock and ready for immediate collection. Our workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Axle repair specialist, including caravan axles. Large range of rental trailers available. We also offer a wide selection of spare parts and accessories for trailers of all makes. Get expert advice by phone, visit our website, or come by in person.

Stanje: rabljeno, Leto izdelave: 2016, For enquiries regarding the attachment, Mr. Herden will assist you (by phone). Rädlinger Tilt Rotator for CAT M318 / CW 40 mount / Year of manufacture: 2016 Price: €12,890.00 net / €15,339.10 gross - Equipment class: 23 t - Weight: 840 kg Matching rigid grading bucket available for €1,490.00 net. Price only valid in combination with the purchase of the tilt rotator. We have many more immediately available attachments in stock! Financing offers available upon request. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telehandlers - JCB construction machinery Cjdpfx Aeymi I Ashxjgt - Mercedes-Benz - Iveco Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Subject to errors and prior sale! Internal Ref.-No.: 562046 = More information = Application: Construction Contact Marius Herden for further information.

Stanje: rabljeno, Leto izdelave: 2016, Uporabljeni etiketirni stroj BRB GLOBUS 2800 steklenic/uro Uporabljeni etiketirni stroj BRB GLOBUS 2800 steklenic/uro, model MEGA ADE 411 CW, zanesljivo nanaša samolepilne etikete na steklene in PET steklenice. Stroj je bil izdelan leta 2016 pri BRB GLOBUS, kar zagotavlja, da je še vedno popolnoma operativen. Poleg tega deluje s sistemom rotacije v smeri urinega kazalca ter dosega kapaciteto 2800 steklenic na uro. Strukturne in funkcionalne značilnosti stroja BRB GLOBUS Cedpfow Am N Rox Ahxegt Dimenzije uporabljenega etiketirnega stroja BRB GLOBUS so 2500 x 1400 x 2050 mm, teža znaša 1500 kg. Zaradi kompaktne in stabilne zasnove je primeren za nemoteno integracijo v obstoječe polnilne linije. Njegova mehanska konstrukcija omogoča visoko delovno učinkovitost ter vključuje enoto za popolno ovijanje samolepilnih etiket, ki popolnoma pokrije vsak vsebnik. Pogon stroja temelji na mehanskih kamerah, ki natančno pozicionirajo vsebnike na obračalnih ploščah. Ker pri premiku plošč ni elektronskega motorja, je vzdrževanje reducirano na minimum ter je zagotovljeno dolgoletno zanesljivo delovanje. Ta sistem dodatno poveča vzdržljivost ter učinkovitost stroja. Podprte vrste steklenic in formati Etiketirka BRB GLOBUS 2800 steklenic/uro podpira obdelavo steklenih in PET steklenic, tudi tistih s predhodno tlačno obdelavo pri praznih PET steklenicah in pločevinkah. Zaradi prilagodljivosti lahko učinkovito obdeluje različne formate steklenic. Podprti formati vključujejo: • Steklene steklenice: 200 ml, 250 ml, 330 ml, 500 ml, 750 ml • PET steklenice: 500 ml V skladu s tehnično dokumentacijo so natančni formati: • Prozorni PET: premer 64 mm, višina 214 mm, prostornina 0,5 l • Prozorno steklo: - premer 61 mm, višina 213,5 mm, prostornina 0,33 l - premer 78,5 mm, višina 286 mm, prostornina 0,75 l Zaradi teh specifikacij stroj omogoča širok spekter uporabe in s tem kompatibilnost z različnimi proizvodnimi zahtevami. Dodatno povečuje delovno prilagodljivost ter je idealen za proizvajalce z različnimi formati steklenic. Sistem etiketiranja Uporabljeni stroj BRB GLOBUS 2800 steklenic/uro uporablja metodo samolepilnega etiketiranja in omogoča popolno ovijanje etikete okoli vsebnika. Ta sistem zagotavlja dosledno in visoko kakovostno etiketiranje. Upravljalci lahko ročno prilagajajo sistem za nanos etiket ter pozicijo etiketirne glave, kar omogoča optimalno prilagajanje različnim velikostim vsebnikov. Na koncu postopka dodatni sistem za glajenje etikete zagotavlja popolno prileganje in preprečuje nastanek gub ali drugih nepravilnosti, ki bi lahko vplivale na videz končnega izdelka. Ta funkcija dodatno izboljša vizualni učinek in vzdržljivost etiket. Varnost in tehnična dokumentacija Stroj je opremljen z varnostnimi napravami, skladnimi z veljavnimi predpisi. Poleg tega so priložena tehnična navodila in vzdrževalna dokumentacija, ki operaterjem omogočajo vse potrebne informacije za montažo, uporabo in redno servisiranje.

Stanje: novo, In stock: CW, XCW & DCW standard/inclined quick coupler weld-on brackets for excavators. Hardox 400. Price incl. VAT: CW00 €36, CW05 €115, CW10 €174, CW20 €335, CW30 €400, CW40 €410, DCW05 €97, DCW10 €190, DCW40 €410, XCW00 €30, XCW05 €100, XCW10 €120, XCW40 €610. Bore diameter 30–60 mm, radius 30–60 mm, distance between bore and hook 150–475 mm. Handelsonderneming Pieper, Nijkerkerstraat 71, 3882 PD Putten (Gelderland). Cgjdpfx Ahef Tny Sexot

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, številka stroja/vozila: 52179, - Type: TB-21.65/J35 - Width: 600 mm - Weight: 550 kg - Capacity: 0.43 m³ - Mounting: CW30/40 Codpfx Ahjvvavloxsgt

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), Na voljo je popolna hladilna naprava Kretschmeyer. Hladilna zmogljivost: 40,7 kW, temperatura medija vstop/izstop: 12°C/6°C, največji delovni tlak nizki/visoki: 18bar/28bar, preizkusni tlak nizki/visoki: 26bar/40bar, hladilno sredstvo: R290, količina hladilnega sredstva: 4300g. Dimenzije stroja X/Y/Z: pribl. 2800mm/1350mm/2350mm, teža: pribl. 1050kg. Vključuje hidravlični modul, obtočno črpalko za hladilno vodo, hranilnik in modul za daljinsko vzdrževanje (monitoring paket). Dokumentacija na voljo. Možen je ogled na lokaciji. Cgjdpfxsxvrvyj Ahxst