Weinig Opticontrol nakup rabljenega (567)

Stanje: pripravljen za uporabo (rabljen), Projektor za optični zajem podatkov Itsdoy Sf Nzepfx Abxoh Elektronski digitalni prikazovalniki za merjenje polmera in višine orodja Nosilec orodij HSK63 za orodja PowerLock Namizni računalnik PC s sistemom PC je popolnoma nameščen, konfiguriran in preizkušen s posebno programsko opremo PowerCom za sistem POWERMAT Navodila za uporabo Leto izdelave: 2010

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, montažni premer: 50 mm, vrsta vhodnega toka: trifazni, premer orodja: 50 mm, dolžina orodja: 330 mm, vhodna frekvenca: 50 Hz, Naprava za prednastavitev orodja WEINIG Opticontrol Premer krožnega gibanja: 0 - 300 mm Dolžina orodja: 0 - 330 mm Isdpfxoxwnvre Abxoth Premer stebla: 50 mm

Stanje: skoraj kot novo (rabljeno), Stojalo za merjenje orodij za merjenje polmera in višine orodja. Meritev se odčitajo na digitalnih prikazovalnikih. Itedpfx Aeyl Rnbobxeh Tehnične podrobnosti: Minimalni premer orodja – 100 mm Maksimalni premer orodja – 300 mm Maksimalna dolžina orodja – 330 mm 220V – 50Hz Teža – 180 kg Priložena navodila za uporabo.

Stanje: dober (rabljeno), Z merilnim sistemom OptiControl podjetja WEINIG lahko optično merite svedre, PowerLock in hidravlična orodja ter zelo natančne rezultate meritev prenesete na lesnoobdelovalni stroj. Naprava omogoča 20-kratno optično povečavo za natančne meritve. Merilni rezultati se preko računalnika in programske opreme PowerCom prenesejo v skobeljni stroj. Stroj lahko ustvari tudi popolnoma nove profile. OptiControl PowerCom vam nudi: Isdpeyl Rm Rsfx Abxeth - merilne instrumente - zapis podatkov iz izmerjenih orodij - ustvarjanje novih profilov - spletni prenos podatkov - optimizacijo delovnih nalog - prihranek časa pri nastavitvi skobeljnika Merilno stojalo za merjenje radija in višine orodja. Meritve so vidne na digitalnih prikazih. Tehnične podrobnosti: - Min. premer orodja: 100 mm - Maks. premer orodja: 300 mm - Maks. dolžina orodja: 330 mm - Napajanje: 220 V, 50 Hz - Teža: 180 kg Priložena so navodila za uporabo.

Stanje: generalkompletno obnovljen (rabljeno), Štiri-stranski skobeljni stroj znamke Weinig model U22N, po obnovi. Miza 22 cm z rebrasto delovno površino. 8 vreten v sestavi: - spodnje: 4 kW - desno: 5,5 kW - levo: 5,5 kW - desno: 7,5 kW - zgornje: 7,5 kW - spodnje: 5,5 kW - zgornje: 7,5 kW - univerzalno: 5,5 kW Pogonski motor: 4 kW Motor za dvig/spust: 0,85 kW Skupna moč: 53,35 kW Samodejno bočno podajanje. Zelo vsestranski stroj, primeren tako za dolge kose (s stranskim podajalnikom) kot za kratke kose (bližji pogon in rebrasta miza). Isdpfx Ajx Syrkobxeth Odlično ohranjen. Premer vreten: 400 mm

Stanje: rabljeno, Profiling machine by Weinig, model PFA17N, ribbed table, 8 spindles (bottom 4 kW, right 4 kW, left 5.5 kW, right 4 kW, top 5 kW, bottom 4 kW, universal 4 kW, universal 4 kW), used. Itodpfx Abey S Acxoxjh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Throughfeed Moulder with 4 Spindles Number of spindles: 4 Spindle arrangement: bottom, right, left, top, bottom Working width: 13 - 230 mm Working height: 6 - 120 mm Feed speed: 8 m/min Feed motor power: 1.5 kW Spindle diameter: 40 mm Spindle speed: 6,000 rpm Spindle axial adjustment range: 30 mm Planer spindle adjustment range: 5 mm Planer spindle motor power: 5.5 kW Top spindle motor power: 4.5 kW Vertical spindle motor power: 7.5 kW Engines are braked Feed roller diameter: 140 mm Length of infeed table: 2,000 mm Pneumatic pressure for feed rollers Feed roller before first bottom spindle, pneumatically actuated Left pressure roller in front of machine infeed Itodpey Enlfsfx Abxeh CE compliant Including 4 pcs. planing heads Dimensions approx. L x W x H = 3,000 x 1,250 x 1,550 mm Weight approx. 1,000 kg Note on used machines: • Technical data subject to errors and prior sale. • Specified prices are ex location - free loaded! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers may inspect the machine onsite. • Special agreements are valid only in written form. (We only respond to inquiries with your address and telephone number!)

Stanje: rabljeno, Weinig Profimat 22 with 4 left mobile units, equipped with a measuring sensor for automatic adjustment based on the width of the workpieces being processed. Itodpsryb D Ssfx Abxsh Dimensions and weight: 330 x 145 x H160 cm. Weight: 1,400 kg (on pallet).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Kompletna linija za proizvodnjo masivnega parketa, proizvajalec MICHAEL WEINIG AG / GMC SERVICE, leto izdelave: 2015/2007. Kapaciteta: 800 m2/izmeno. Maksimalna širina parketa: 200 mm, maksimalna dolžina: 2.400 mm. Na tej liniji je možno hkrati proizvajati različne dimenzije! Vrste parketa: Riba kost 90°, Chevron 45°/60°. Stanje: odlično. Itedjyzfr Uopfx Abxjh

Stanje: rabljeno, Leto izdelave: 1980, No. 3192 Four-Side Planer WEINIG U 17 A Used, year of manufacture 1980, machine available from February 2025 Machine still in operation 6 spindles Spindle arrangement: bottom – right – left – top – bottom – bottom Working width: 170 mm (with a tooling circle of 125 mm) Working height: 120 mm (with a tooling circle of 125 mm) Jointing spindle: 4 HP All other spindles: 5.5 HP Feed: 2 or 3 HP Spindle speed: 6000 rpm Working spindle diameter: 40 mm Smallest tooling circle diameter of profiling spindles: 100 mm Largest tooling circle diameter of profiling spindles: 180 mm Feed continuously variable: 6 – 18 m/min Feed roller diameter (hardened): 140 mm Feed roller width: 50 mm Adjustment range of infeed table and jointing fence (right): 10 mm Adjustment range of vertical spindles below table: 40 mm Adjustment range of horizontal spindles (axial): 30 mm Straightening table length: 2 m Sale on behalf of customer, ex location Upper Austria, without dismantling, transport, or installation Errors in description and price excepted Dismantling, transport, and loading by us possible as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale No warranty is provided for used machinery; sale is "as inspected" Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Iedpfxovkhcce Abxjth Delivery terms: ex location

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Štiristranski skobeljni stroj BMH Coroprofil 32 320x160mm Delovna širina: 320mm Delovna višina: 160mm Število vreten: 6 Razporeditev vreten: Spodaj: 9,2kW Desno: 7,5kW Levo: 7,5kW Zgoraj: 11kW Desno: 7,5kW Levo: 7,5kW Premer vreten: 40mm Stranska vretena nastavljiva v dveh ravninah Elektronsko pozicioniranje stroja Podajna hitrost: 4-24m/min Itjdpfx Abszd Eg Isxeh

Stanje: rabljeno, Izvrtina 35 mm Itsdpfszdvbiox Abxsh Premer krožne poti 50 mm Set vmesnih oziroma distančnih obročev z 10 mm utorom za pero, za uporabo na različnih strojih za obdelavo lesa, zlasti na skobelnikih. Slika je simbolična. Na voljo kompleti: 3

Stanje: rabljeno, Vrtina 50 mm Dolžina 260 mm Iodpfezdva Sox Abxoth Sistem rezil: rezila za skobljanje v traku Letni premer 200 mm Število rezil 12(6) kos Material jeklo Manjka 6 vpenjalnih letev.

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina rezkanja: 180 mm, WEINIG NKT Double-End Finger Jointing Line DP20 An industrial finger jointing line – engineered for maximum precision and efficiency Technical Specifications: Wood infeed length: min. 130 mm | max. 1000 mm Wood outfeed length: min. 3700 mm | max. 7400 mm Wood cross section: min. 20 x 40 mm | max. 80 x 180 mm Cutter diameter (): 370 mm Finger joint configuration: Vertical / Horizontal, 10/11 fingers, 3.8 mm pitch Glue application: Double-sided, PVAC white glue Connected load: 80 kW Note: The machine is currently dismantled and in stock at our warehouse. Viewing can be arranged by appointment. Scope of delivery: WEINIG NKT Double-End Finger Jointing Line DP20 including control unit Integrated glue application station for double-sided gluing Operating manual & documentation Hydromat 17B (7 Spindle) General Information Manufacturer: Weinig AG Model: Hydromat 17B // 7 spindle (various tooling) Type: High-performance profile moulder / planer and tenoning machine Iodpfx Abezcrk Eexoth Year of manufacture: 1989 Operating voltage: 380 V / 50 Hz Bottom-Right-Left-Right-Left-Top-Bottom-Table fixed Description Heavy-duty high-performance planing and tenoning machine, constructed of vibration-absorbing and torsion-resistant cast iron modular components. Designed for precise and cost-effective wood machining with high continuous output. Mechanical feed, adjustable from 5–35 m/min, feed motor 5.5 kW (7.5 HP). Surfacing table 2 m long, quick adjustment available. Cutting depth adjustment for surfacing and jointing spindles, each with a 10 mm adjustment range. Technical Data • Feed speed: 5–35 m/min, mechanical • Feed motor: 5.5 kW / 7.5 HP • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm • Cutting depth adjustment range: 10 mm (surfacing and jointing sides) • Machine configuration: Without counter bearings, high-performance version

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Na prodaju je polovni četverostrani blanjalni automat marke Weinig sa 7 vretena i ulaznim valjkastim transporterom. Mašina se nalazi u našem pogonu najmanje od 1985. godine, a kompletno je servisirana 2007. godine. Potpuno je ispravna, ali se više ne koristi. Tačna godina proizvodnje i precizna oznaka tipa nisu poznate. S obzirom na konstrukciju i opremu, pretpostavlja se da se radi o modelu iz Weinig Unimat serije. Tehnički podaci (približno): - 7 vretena - Prečnik vretena: 40 mm - Radna širina: cca 20 – 170 mm - Radna visina: cca 8 – 120 mm - Prečnik alata: do cca 160 mm - Brzina posmaka: 6 – 24 m/min - Napon: 380 V / 50 Hz - Težina: cca 4.500 kg - uključuje ulazni valjkasti transporter - uključuje različite glodalice (vidi fotografiju) Mašina se prodaje bez ikakve garancije. Pregled i ispitivanje na licu mesta su izričito poželjni. Ijdpjza S Edjfx Abxeth

Stanje: rabljeno, Rabljeni stroj Godina proizvodnje: 2004 Oprema i tehnički podaci: - Radni sati: cca 5000 - Širina blanjanja: 230 mm - Visina blanjanja: 120 mm - Broj vretena: 6 - Donja vretena: 2 - Desno vreteno: 1 - Lijevo vreteno: 1 - Gornja vretena: 2 - Raspored vretena: dolje / desno / lijevo / gore / gore / dolje - Snaga motora u kW: 11 / 7,5 / 7,5 / 11 / 11 / 11 - Maks. broj okretaja vretena: 6800 o/min - Promjer vretena: 40 mm - Posmak: maks. 30 m/min Itsdpfsyxyausx Abxoh - Posmak: beskonačno podesiv - Posmak: 4 kW - Glavni motor: 11 kW - Predrezni glodalo - Površina stola kromirana - Duljina ulaznog stola: 2000 mm - Stolni valjci pogonjeni - Pumpa za klizno sredstvo: ručna - Pritisak odozgo: pneumatski - Pogon: transportni valjci kardanski - Ukupna priključna snaga: 80 kW - Dimenzije: 4100 x 2050 x 1900 mm Stroj se nudi bez alata, isti se mogu nabaviti kao rabljeni alati. Dostupnost: kratkoročno Lokacija skladišta: Röllbach

Stanje: delavnici obnovljeno (rabljeno), Število vreten: 5 kos Delovna širina: 230 mm Višina skobljanja: 120 mm Dolžina poravnalne mize: 2500 mm Pogonski motor podajalnika: 4 kW Hitrost podajanja: 5–30 m/min Krmiljenje: spominska funkcija Weinig Powermat 400 s HSK/Powerlock, CNC-osno/radialno krmiljenje ----- Stroj je trenutno pri nas v postopku obnove! Slike pred demontažo in trenutno v procesu obnove! Kratek povzetek: ----- - 5 vreten s 8.000 obr/min - 4 x HSK/Powerlock - CNC-nastavitve vreten v osni in radialni smeri preko krmiljenja - CNC-krmiljena nastavitev in pozicioniranje podajalnika - Mizne plošče z vodilnim nožem pri vretenih 2 in 3 - Vključno s povratnim sistemom Weinig/Neumann RF 15 Podroben opis: ----- Tehnični podatki: Delovna širina: 20–230 mm Delovna višina: 8–120 mm 1. Nastavek za orodje – spodaj ----- Motor z zavoro: 5,5 kW Premer vretena: 40 mm Obratov: 6.000 obr/min Krog gibanja noža: 93–145 mm Ijdeyy A Iqepfx Abxeth Nastavitev osi: 5 mm Zaoplitvena enota MarathonCoatin za mizno vlogo pred 1. spodnjim nastavkom za orodje 2. Nastavek za orodje – PowerLock – desno ----- Motor z zavoro: 7,5 kW Skupni motor z levim nastavkom za orodje Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja 40 mm pod ravnino mize: 93–200 mm Krog gibanja orodja 55 mm pod ravnino mize: 93–180 mm Krog gibanja za ravne rezilne glave maks. 163 mm Maks. premer orodja za ravnilno mejo: 180 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 55 mm Vreteno osno CNC-krmiljeno Mizne plošče z vodilnim nožem 3. Nastavek za orodje – PowerLock – levo ----- Motor z zavoro: skupni motor z 2. vretenom Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja 40 mm pod ravnino mize: 93–200 mm Krog gibanja orodja 55 mm pod ravnino mize: 93–180 mm Krog gibanja za ravne rezilne glave maks. 163 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 55 mm Vreteno CNC-krmiljeno v osni in radialni smeri Mizne plošče z vodilnim nožem 4. Nastavek za orodje – PowerLock – zgoraj ----- Motor z zavoro: 7,5 kW Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja: 93–200 mm Krog gibanja za ravne rezilne glave maks.: 180 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 40 mm Deljena pritisna noga pred zgornjim nastavkom za orodje, nastavljiva po krogu gibanja orodja in zložljiva, vzmetena. Pritisna noga pred in odvod po zgornjem nastavku z elektronskimi digitalnimi prikazi, integrirani v spominsko funkcijo Vreteno radialno CNC-krmiljeno 5. Nastavek za orodje – PowerLock – spodaj ----- Motor z zavoro: 7,5 kW Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja: 93–200 mm Maks. globina profiliranja: 15 mm Nastavitev osi: 35 mm Podajalni sistem ----- Frekvenčno krmiljen podajalnik, brezstopenjsko nastavljiv z zavoro: 4 kW, 5–30 m/min Vlečni valj pred 1. spodnjim orodjem pnevmatsko dvig/nizko krmiljen Durofer valji s koničastimi zobmi (Weinig patent) z omejevalnikom globine in samoočiščevalnimi...

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Rezalna vretena 2 kosa Število rezkalnih enot: 7 kosov Premer vretena: 50 mm Krmiljenje Weinig PC-Nexus Weinig Uncontrol 12 z radialnimi in aksialnimi NC vreteni ter VARIO mizo ..... Stroj je že strokovno demontiran in skladiščen v 73447 Oberkochen Tehnični podatki - povzetek (morebitna dodatna vključena oprema na povpraševanje) ..... Krožna čelilna žaga ..... > Elektronska čelilna žaga, vodoravno brezstopenjsko nastavljiva > Število orodij: 1 kos > Hitrost vretena: 3000-6000 vrt/min > Premer vretena: 40 mm > Največji premer orodja: 400 mm > Moč motorja: 3,7 kW > Laserska črta za zaznavanje reza > Aksialni pomik 150 mm NC-os, elektronsko brezstopenjsko > Radialni pomik pnevmatsko, 8 pozicij npr. za zaobljenje robov z vrha Zaoblitvena enota ..... > Položaj: vodoravno spodaj > Aksialni pomik skupaj s čelilno žago. Elektronski dolžinski prislon ..... > Dolžina: 4.500 mm 1. Čepilno in rezalno vreteno ..... > Število orodij: variabilno > Moč motorja: 15 kW > Premer vretena: 50 mm > Dolžina vpenjanja orodja: 640 mm, z nasprotnim ležajem > Aksialni pomik: 580 mm NC-os, brezstopenjsko > Hitrost vretena: 2.800–4.000 vrt/min > Premer orodja: 380–400 mm > Protiprim, celotna vpenjalna dolžina je podprta 2. Čepilno in rezalno vreteno ..... > Število orodij: variabilno > Moč motorja: 15 kW > Premer vretena: 50 mm > Dolžina vpenjanja orodja: 640 mm, z nasprotnim ležajem > Aksialni pomik: 580 mm NC-os, brezstopenjsko > Hitrost vretena: 2.800–4.000 vrt/min > Premer orodja: 380–400 mm > Protiprim, celotna vpenjalna dolžina je podprta Transportni trak ..... Za prenos delov v vzdolžno obdelavo, vključno z ločilnikom za dvojne dele pred vhodom v vzdolžno obdelavo. 1. Profilna vretena (sočasno in nasprotno vrtenje) ..... > Položaj: navpično desno > Število orodij: variabilno > Moč motorja: 11 kW > Premer vretena: 50 mm > Dolžina vpenjanja orodja: 400 mm, z nasprotnim ležajem > Aksialni pomik: 350 mm NC-os, brezstopenjsko > Radialni pomik: 80 mm NC-os, brezstopenjsko > Hitrost vretena: 6.000 vrt/min > Minimalni delovni krog orodja: 140 mm > Maksimalni delovni krog orodja: 232 mm 2. Profilna vretena ..... > Položaj: navpično desno > Število orodij: variabilno > Moč motorja: 11 kW > Premer vretena: 50 mm > Dolžina vpenjanja orodja: 400 mm, z nasprotnim ležajem > Aksialni pomik: 350 mm NC-os, brezstopenjsko > Radialni pomik: 80 mm NC-os, brezstopenjsko > Hitrost vretena: 6.000 vrt/min > Minimalni delovni krog orodja: 140 mm > Maksimalni delovni krog orodja: 232 mm 3. Profilna rezkalna enota (utorna enota od zgoraj) ..... Itedpfx Asyrtzkjbxoh > Položaj: vodoravno zgoraj > Moč motorja: 3,0 kW > Premer vretena: 40 mm > Dolžina vpenjanja orodja: 40 mm > Aksialni pomik: 30 mm NC-os, brezstopenjsko > Radialni pomik: 125 mm NC-os, brezstopenjsko > Hitrost vretena:

Stanje: nepreverjeno (rabljeno), Slot spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, VARIO table, and trimming carriage ..... Machine professionally dismantled and stored at our warehouse in 73447 Oberkochen. Video and photos were taken before dismantling. Technical data summary (additional accessories possibly included, please inquire) ..... Crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser alignment light for identifying saw cuts > Axial adjustment range: 150 mm NC axis, electronically infinitely adjustable > Radial adjustment range: pneumatically controlled, 8 positions for e.g., edge rounding from above Rounding unit ..... > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically linked with crosscut saw. > Radial adjustment: pneumatically operated on/off Electronic length stop ..... > Length: 4,500 mm 1st Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter-support: the entire clamping length is counter-supported 2nd Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter-support: the entire clamping length is counter-supported Transfer belt ..... For transferring parts to the longitudinal machining section, including part separation for doubles infeed to the longitudinal machining. 1st Profiling spindle (climb and counter rotation) ..... Ijdpfx Abjx H Al Nsxsth > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment: 350 mm NC axis, infinitely adjustable > Radial adjustment: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically controlled according to tool diameter 2nd Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment: 350 mm NC axis, infinitely adjustable > Radial adjustment: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Stanje: delavnici obnovljeno (rabljeno), Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig four-sided planer Profimat 23 window version with glazing bead separation or can be used as a grooving spindle. ATS control and program control ----- In 2024, the machine was factory-refurbished by Weinig. Technical data summary (possibly including additional accessories – please inquire) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically activated up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatic up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional features ----- > Glazing bead separation or usable as grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with memory for 99 programs > Machine operation: window package Combined control of the right spindle and glazing bead separator via manual selector switch on the control panel > Spindles with mechanical digital display Iodoxpn T Uopfx Abxeth (technical data as per manufacturer – subject to confirmation!)

Stanje: delavnici obnovljeno (rabljeno), Working width: 230 mm Working height: 15–120 mm Number of spindles: 2 pcs. Weinig Hydro Planer Type Uniplan 23 ----- Machine factory-refurbished by Weinig in 2024. Description: For double-sided horizontal wood processing with 2 working spindles. Spindle arrangement: horizontal, bottom and top. Both horizontal spindles are equipped with hydraulically tensioned counter-bearings without axial adjustment. Integrated straight jointers on both spindles with automatic stone feed, remotely operable with closed hood. Machine with continuous, chainless feed system equipped with rubber rollers. Electric height adjustment of spindles according to mechanical digital display (SIKO). Limit switch for height adjustment. Feed roller pressure pneumatic. Stops and table plates non-adjustable. Machine with steel table plates. Machine fully enclosed with integrated sound and dust protection, including internal lighting. Electrical execution according to DIN VDE 0113, electrical equipment for industrial machines EN 60204, IEC - 204 - 1. No other electrical regulations considered. Machine includes operating tools, but no processing tools. The spindles of the Weinig Uniplan operate at a speed of 7,200 revolutions per minute. Please check before using existing tools whether they are suitable for this speed. Please also take this into account when ordering new tools. Technical specifications: Working width max.: 230 mm Itjdpfxjxpn Tzs Abxeh Working height min.: 15 mm, max.: 120 mm Feed motor: 3 kW (4 HP) Each horizontal spindle: 7.5 kW (7.5 HP) Feed speed, stepless: 6–36 m/min Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool diameter: 163 mm Fixed clamping offset below: 0.5 mm (Technical data according to manufacturer – subject to change!)

Stanje: pripravljen za uporabo (rabljen), Delovna dolžina 3600 mm Delovna širina 1500 mm Delovna višina cca 900 mm WEINIG povratni sistem RF15 ----- Uporabno za skobeljnike, rezkalne in profilirne stroje z maks. podajalno hitrostjo cca 22 m/min. Tehnični opis: Dolžina obdelovanca: 250 - 3.600 mm Širina obdelovanca: 30-230 mm Vzdolžno-prečno-vzdolžni transporter z 2 integriranima, pogonjenima valjčnima progama: Prečna transportna pot 1.500 mm Ijdoxpn Tnjpfx Abxoth Konstantna transportna hitrost: 30 m/min Dolžina valjčne proge: 2.200 mm Povratna valjčna proga (nepogonska) do operaterja (Tehnični podatki po navedbah proizvajalca - brez garancije!)

Stanje: delavnici obnovljeno (rabljeno), Število vreten: 8 kos Delovna širina: 230 mm Višina skobljanja: 120 mm Weinig skobljalna linija ----- Sestavljeno iz naslednjih posameznih strojev: Poz. 1: Weinig Profimat 23 E, štiristranski skobeljni stroj, številka zaloge: 2803 5 vreten + žaga za steklene letve Isdpfx Abexpn Tuoxsth Poz. 2: Weinig Uniplan 23, številka zaloge: 2804 Fini in hidro skobeljni stroj z 2 horizontalnima vretenoma Poz. 3: Weinig RF 15, številka zaloge: 2805 Vzdolžno-prečno-vzdolžni transporter z vračanjem obdelovanca k operaterju Podrobni opisi strojev so na voljo pod navedenimi številkami zaloge. (Tehnični podatki po navedbah proizvajalca, brez jamstva!)

Stanje: delavnici obnovljeno (rabljeno), Tenoning spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC controlled radially and axially ---- The machine was factory-refurbished by Weinig in 2024. As part of this, the control system was replaced with a Siemens S7 677 C, including a new “Touch” membrane panel. With the following machining units: Crosscut saw ---- with laser guide light, motor power 3 kW, spindle diameter 40 mm, Isdpjxpi Dusfx Abxoth spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatic, 8 positions for top edge rounding Bottom-mounted unit for edge rounding ---- axial adjustment shared with crosscut saw Haunching and tenoning spindle ---- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm min. tool cutting circle 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial traverse path 580 mm adjustment speed 100 mm/sec. 1st profile spindle (climb and conventional milling) ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit, top ---- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit, right, at machine outfeed ---- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional accessories ---- CNC-controlled length stop, mounted on the tenoning table for lengths up to 3,500 mm, including crosscut saw integrated into the control system. Studio window facility, swivelling ±60° Double workpiece package with automatic separation and transfer Climb milling facility with window automation for rabbetting Rabbetting carriage for small sash widths Climate control unit in electrical cabinet PC control NEXUS Automatic turning system Lamella conveyor including return belt for return of workpieces to the operator (specifications as per manufacturer's information – subject to confirmation).

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control system: Memory function Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle controlled for width and height Detailed description: ----- Technical specifications: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool flight circle: 125 - 145 mm Tool flight circle for rebate cutter: 130 - 160 mm Axial adjustment range: 5 mm Rebating device MarathonCoatin (coating) for table insert in front of the 1st lower tool seat Electronic digital display for radial adjustment 2nd spindle - right ----- Motor with brake: 11.0 kW Shared motor with left tool seat Spindle diameter: 40 mm Speed: 6,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool flight circle for straight knife heads max.: 163 mm Max. tool diameter behind fence plane: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool flight circle for straight knife heads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Itsdpfx Aewzmu Rebxeh Spindle radial CNC-controlled 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool flight circle: 93 - 200 mm Tool flight circle for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Spindle radial CNC-controlled Segmented pressure shoe in front of top tool seat, adjustable to tool flight circle and swing-away from tool, spring-loaded. Pressure shoe before and extraction after the top spindle with electronic digital displays, integrated in the memory function or PowerCom 5th spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool flight circle: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Feed roller in front of 1st lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to left tool seat, axial 35 mm Machine electrics ----- Operating voltage 400 V (range 380 - 420 Volt), 50 Hz. All spindles IE 2 design Electrical configuration according to DIN VDE 0113, electrical equipment for industrial machinery EN60204, IEC-204-1. Additional electrical regulations are not considered. Machi...