Tripette & Renaud - nakup rabljenega (20)

Leto izdelave: 2009, stanje: rabljeno, Leto: 2009 Tip: Vibracijsko sito Material: nerjaveče jeklo Referenca motorja: Elettromeccanica Tarcisio Pugni PVF-F 200 Moč motorja: 1,1 kW / 1500 vrt/min Nazivni premer sita: 900 mm Sistem čiščenja sita: kroglice Dimenzije stroja: 110 x 130 x 120 cm Načrt za zamenjavo mreže: ta element je lahko predmet ločene ponudbe. Nedpoykb U Nefx Abrewh

Stanje: potreben popravila (rabljeno), Leto izdelave: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 - 9 m/min - Compatible belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - Feed tables with 4 rollers at the infeed and 4 at the outfeed - Table positioning via sensor - Vacuum conveyor belt (perforated belt and motor-driven fan) - Pneumatic foot control pedal 1) Calibration 2) Calibration / sanding 3) Finishing sanding MACHINE FEATURES: - Main supply: 400V. Three-phase 50Hz - Automatic star-delta starter - Ammeter(s) for monitoring power consumption Nwsdpfoy I Srzjx Abroh - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction: 3 upper outlets Ø mm Recommended air flow: 2500 m3/h per hood NOTE: For your satisfaction, please remember to release belt tension when the machine is not in use, and avoid any exposure to moisture—including condensation from dew point inside your workshop during winter. Machine dimensions: 1920 x 2050 x h.2240 mm

Stanje: dober (rabljeno), Leto izdelave: 2017, EDGEBANDER WITH DIGITALLY CONTROLLED SETTINGS WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Workpiece height: 8 - 58 mm 10 to 45 mm with corner rounding unit in use - Panel length: 210 to 2500 mm - Minimum workpiece width: 90 to 1100 mm - Edge thickness (roll): 0.4 to 3 mm without corner rounding max 3 mm with corner rounding unit - Edge thickness (strips): max 6 mm without corner rounding max 3 mm with corner rounding unit - Edge width: panel thickness + 2mm each side - Feed speed: 11 m/min - Minimum workpiece gap: 600 mm - Panel overhang (relative to conveyor chain): 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Ø800 mm reel holder - Front workpiece support extension - Easy Size: digital positioning of infeed fence and workpiece passage height - Anti-adhesive spray unit - Edge trimmer (RT-V) 12,000 rpm - Infrared panel pre-heating at infeed - Glue unit (VC-VM) with interchangeable gluepot for granules, 1 kg capacity. Heat-up time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers incl. 1 motorised and timer-controlled roller - Tilting end trimming unit 0-20°, 12,000 rpm - Top/bottom flush trimming unit with digital position adjustment with copying system. 1/4 round (radius 2 mm) or chamfer cutter, 12,000 rpm - Corner rounding aggregate R2mm, 12,000 rpm with digital positioning - Top/bottom radius scrapers R1 & R2 mm with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (nebuliser) OTHER SPECIFICATIONS: - Trimmer motors: 2x2 kW - End trim motors: 2x0.19 kW - Height adjustment motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming motors: 2x0.65 kW Nwsdpfxerx S Ipe Abrjh - CE marking - Lockable mains switch, emergency stop buttons - Main power: 380V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 and 5x Ø80 mm Spindles: 780 m³/h Trimming 360 m³/h Scrapers 2x360 m³/h Max. operational floor space: 10.80 x 2.40 m Transport dimensions (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and schematics.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Širina 500 mm Ø45 mm Prosto tekoči valji ali pogon s pasovi. Nwsdpfx Aezcplgebrsh

Stanje: rabljeno, Leto izdelave: 2014, številka stroja/vozila: AH /117836, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2025, Oprema: dokumentacija / priročnik, Idealni stroj za končno lepljenje robov masivnih lesenih plošč OBDELAVNE ZMOGLJIVOSTI: - Višina (debelina) obdelovane plošče: 8 do 60 mm - Globina odvzema pri rezkarjih: največ 90 mm², od 0 do 3 mm - Minimalna dolžina obdelovane plošče: 140 mm pri robnem traku debeline >3 mm 200 mm pri robnem traku debeline med 3 in 12 mm - Širina obdelovane plošče do 2000 mm - Debelina robnega traku: 0,4 do 3 mm (v kolutu), v traku do 12 mm Plošča mora presegati verigo (izstop kosa) najmanj 30 mm - Predvidena širina robnega traku: debelina plošče + 4 mm - Pogon (2 pomični hitrosti) 18 m/min za tanke robove 12 m/min za robove v traku (masivni les) - Priporočena minimalna razdalja med kosi glede na hitrost pomika: 800 mm SESTAVA STROJA: - Podajalni vrtljivi krožnik Ø780 mm uporabne površine - Električno nastavljiv vhodni vodilni element - Pogonska veriga s trakovi, višina delovne površine od tal 96 cm - Frontalna podaljšana miza z valji na kolesih (servirna mizica do 2 m) - Skupina za poravnavo RT-E (poravnalni rezkarji) 2x 4kW 9000 obr/min Nwjdpszcpixsfx Abreh - Enotalni lepilni agregat VC Predgretje robnega traku z infrardečo svetlobo Polnilec s predtalilcem za EVA granulacijo, indikativna poraba 8,5 kg/h Lepilni lijak “fastblock”, pnevmatska predrezalna škarja Marufliranje (stiskanje) z 4 valji – eden motoriziran, elektronsko nastavljiv pritisk - Enota za končno rezanje K-SEL Hitrost vrtenja 12000 obr/min, naklon motorjev 0–15° - Pravilna rezkalna enota RFK zgoraj/spodaj Hitrost vrtenja 12000 obr/min - Enota za posnemanje robov RI 800 s kopirno nogo Hitrost vrtenja 12000 obr/min, naklon vreten 0–25° - Kompaktna brusilna enota GLC 1400 obr/min Trak 75 x 2700 mm, naklon 0–5°, nastavljiv pnevmatski pritisk - Polirna postaja SPN s tekstilno polirno krtačo - Motorni povratni sistem delov, uporabna širina 1 m, z 2 valjčnima tirnicama, razmak 34 cm Zračna blazina in tračni transporter. Višina izhodne površine od tal 79 cm DRUGE LASTNOSTI: - Glavno napajanje: 400 V, trifazni+N+T, 50 Hz - Nazivna vgrajena moč IN 52A - Pnevmatska napeljava: 8–10 barov, suhi zrak, delovni tlak 6 barov - Odsesavanje: 6x Ø50 mm, 1x Ø80 mm, minimalni pretok 3000 m3/h - CE označevanje, zaklepljivo stikalo za izklop, gumbi za izredni izklop

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 12.666 h, moč: 12 kW (16,32 KM), MACHINING CAPACITIES: - X (U) axis vertical milling travel: 3875mm, between stops 3170mm - Y (V) axis milling travel: 1390mm between stops, for drilling: 1201mm - Z (W) axis milling travel: 290mm Maximum workpiece height (thickness), usable stroke: 110mm Additional information: see stroke diagram per aggregate - Maximum traverse speeds: X (U) axis: 60 m/min Y (V) axis: 50 m/min Z (W) axis: 20 m/min MACHINE CONFIGURATION: - Work table with 6 mobile support beams, equipped with some vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity 44 to 78mm 6 rear stops 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table split into 2 working zones - Becker VTLF 250 m³/h 5.5 kW vacuum pump with air filter - Pfannenberg 1.7 kW cooling unit - Chip conveyor belt - X axis movement by rack and pinion, Y & Z axes by ball screw and nut (high-precision linear guides with automatic lubrication) - Aggregates on swan neck composed as follows: • 12 kW HSD milling/routing unit - Tool holder type: HSK 63 F - Variable speed 6000 - 24000 rpm Controlled by frequency inverter - Perimeter extraction hood - Onboard tool magazine: 10 positions + additional 12-position magazine • 11-spindle 1.7 kW drilling unit - Spindle pitch: 32mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles in X - 1+1 horizontal spindles in Y • Operator console Nwodpfx Asy Nb Tksbroh - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual DXF conversion and direct execution of ISO, TLF, DXF Pre-programmable zones Remote control included OTHER CHARACTERISTICS: - Total electrical supply: 400V, 3Phases+N+PE, 50Hz Rated current 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average air consumption: 100Nl/min - Extraction: Lower port Ø120mm, upper port Ø250mm Recommended airflow 6500 m³/h, speed 20 m/s - CE marking compliant, safety zones and protective grid Lockable disconnect switch, emergency stops Operating footprint: see diagram Transport footprint: to be specified during preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Original documents, manual, spare parts list, electrical and pneumatic diagrams, service keys, programs, and license keys included.

Stanje: rabljeno, Značilnosti: Sestavljen iz dveh motoriziranih ukrivljenih transporterjev pod kotom 90°. Nsdpfxox Sx Iqe Abrowh Polmer ukrivljenosti: 3 m po osi. Skupna dolžina v raztegnjenem stanju: 4,80 m. Skupna širina strukture transporterja: 750 mm. Lakirani bukovi letvi: 620 x 54 x 42 mm. Nastavljiva višina od tal: 500–650 mm. Pogonski sistem z verigami in zobniki. Stransko vodenje in spodnji povratek po drsniku iz sintetičnega materiala. Integrirani pogonski reduktorski motor. Stikalo v krmilni omarici z zaščitnim odklopnikom. Nujna zaustavitev in glavno stikalo. Električna omara z elektronskim regulatorjem hitrosti za oba ukrivljena gumijasta traka.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 13189, Funkcionalnost: omejena funkcionalnost, ELECTRICALLY OPERATED VERTICAL PANEL SAW WITH DIGITAL DISPLAYS FOR CUTTING Nwsdpfxou R Ulhe Abroh Brand: GMC MACCHINE SRL Model: KGS 660S Serial No.: 13189 Year: 1998 (Photos taken prior to any potential servicing, machine offered as-is) WORKING CAPACITIES: - Max. horizontal cutting length: 5300 mm - Max. horizontal cutting height: 2100 mm - Max. vertical cutting height: 2200 mm - Max. cutting depth: 80 mm OTHER FEATURES: - Power supply: 380 V, 3-phase + neutral - Installed power: 7.5 kW - Main motor power: 4.4 kW (6 HP) - Saw blade rotation speed: 5200 rpm Blade with pneumatic extraction - Carbide saw blade: Ø 300 mm, bore Ø 30 mm - Heavy-duty welded steel frame, PVC slatted support frame with automatic retracting pneumatic cylinders - Pneumatically retractable intermediate support along the entire length with two adjustable and retractable stops - Retractable rollers for panel movement - Pneumatic locking of saw carriage - Pneumatic supply: 8 bar - Digital cutting display - Full extraction system DPS Rear cover spanning the entire back of the machine Lower longitudinal duct for sawdust collection Multiple extraction points at the base Extraction outlet: Ø100 mm - Feet-mounted frame support - CE marking Total overall dimensions installed with jack stands: 6300 x 1600 x 3040 mm (includes operator and maintenance zone) Transport dimensions, 2 packages: . 1 frame: 6300 x 860 x h.2620 mm . 1 pallet: 3150 x 1000 x 1000 mm Total weight: 1250 kg Please contact us regarding supply of consumables, accessories and/or extraction systems. Lot offered without servicing or warranty Ex works price, excl. VAT. Transport and services available on request.

Stanje: rabljeno, Leto izdelave: 1999, največja višina reza: 210 mm, največja širina rezanja: 460 mm, PNEUMATIC MITRE SAW, TILTABLE: Brand: STROMAB Model: PS 600/P Serial No.: 990460 Year: 1999 MACHINING CAPACITIES: - Maximum timber section: 210 x 460 mm (thickness x width) - Tilting arm (rotation): -45° to +40° - Cutting capacity at 45° angle: 210 x 325 mm max FEATURES: - CE marking - Pneumatic feed to the front arm - Lockable isolator, emergency stop buttons - Main supply: 380V, 3-phase, 50 Hz - Saw motor power: 7.5 kW (10 HP) IN 16.5A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm, Bore: Ø 30 mm, Thickness: 4.2 mm - Table height (working height): 880 mm - Main table in wood: 1100 x 710 mm, with 2 pneumatic clamps - Pneumatic supply: 6 bar, Estimated consumption: 28 nl - Extraction port: Ø 150 mm Recommended airflow: 1350 m3/h, 20m/2 Overall dimensions: 1700 x 1500 x h.1900 mm Weight: 630 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Nwodporx Tatjfx Abreh Machine offered as is, with no specific overhaul works included.

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 02-84-022, moč: 37 kW (50,31 KM), FOUR-SIDED PLANER & MOULDER, 4 TOOL HOLDERS + UNIVERSAL SPINDLE, 2.50M TABLE & HEAVY-DUTY MOTORS Brand: CASADEI Model: MATRIX 4+1 Serial No.: 02-84-022 Year: 2002 WORKING CAPACITY (thickness x width): 6 to 155 x 25 to 230 mm - 4-sided planer and moulder - Working width: 25 to 230 mm - Working height (wood thickness): 6 to 155 mm - Maximum finished wood section: 155 x 230 mm - Minimum working length: 480 mm - Adjustable cutting depth max: 10 mm - Spindle speed: 6000 rpm MACHINE CONFIGURATION: - Heavy-duty welded steel frame - Panoramic soundproof hood with gas struts - Raised operator control panel - Infeed steel table 2500 x 250 mm Floor height: 880 mm Lateral entry spring-loaded pressure feed Nwjdpfxeu Sr Ive Abroh Manual table lubrication unit located after jointer 1) Bottom horizontal spindle 5.5 kW TERSA cutterhead Ø 125x h.240 mm Retractable vertical pressure roller 2 & 3) Right and left vertical spindles, each 7.5 kW TERSA cutterhead Ø 125 x h.165 mm 4) Top horizontal spindle 7.5 kW TERSA cutterhead Ø 125 x h.240 mm Adjustable pressure shoe at outfeed 5) Universal spindle 7.5 kW Ø 40 x 255 mm Retractable horizontal pressure roller FEED SYSTEM: - Variable feed speed: 5 to 25 m/min Feed motor: 1.1 kW (1.5 hp) - 8 independent pneumatically-pressurized feed rollers: 2+2 grooved steel, then 2+2 rubber coated OTHER FEATURES: - CE marked - Main power: 380 V, 3-phase, 50 Hz - Lockable switch, automatic star-delta starters Front/rear emergency stop buttons - Installed power: 37 kW (50 hp) IN 62A - Brake motors - Main spindles driven by cardan shafts - Digital counters (Siko-type) for precise manual adjustment - Electrically operated beam up/down for thickness setting Beam elevation motor: 0.37 kW - Axial spindle adjustment: Bottom horizontal: 0 to 15 mm Top horizontal: 0 to 25 mm Verticals: 0 to 25 mm - Acceptable tool dimensions: Bottom horizontal spindle: Ø 120 to 140 mm Profiling on vertical spindles: Ø 100 to 180 mm Profiling on top horizontal spindle: Ø 100 to 180 mm End milling cutter: Ø140x12x40 mm - Recommended pneumatic supply: 7 bar Working pressure: 6 bar Average consumption: 0.85 Nl/cycle Connection: 1/2" G - Extraction, top central nozzle: Ø 250 mm Required air speed: 25 m/sec minimum, Capacity: 4500 m3/h - Technical manual included. - Machine equipped with 4 TERSA cutterheads Machine dimensions: 4700 x 1700 x h.1800 mm Weight: 2240 kg Contact us for supply of consumables, accessories, and/or extraction systems.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 0803024, Funkcionalnost: popolnoma funkcionalen, FOUR-SIDED MOULDER PLANER 5 REINFORCED SPINDLES WITH MOTORS & 3.00 M CHROMED TABLE Brand: LEADERMAC Model: SMARTMAC 523 Type: LMC-523SU Serial Number: 0803024 Year: 2008 (Photos taken prior to refurbishment & cleaning) MACHINING CAPACITIES: - Four-sided planer and moulder - Max section: 130 x 230 mm - Thickness: 10 to 130 mm - Width: 15 to 230 mm - Minimum single piece length: 600 mm > 760 mm when using the universal spindle - Adjustable cutting depth: max 10 mm - Spindle speed: 6000 rpm MACHINE SPECIFICATIONS: - Heavy-duty welded-steel frame - Full panoramic soundproofed hood with safety interlocks and gas struts, with internal lighting - Digital counters (Siko type) for precise manual adjustment of each process - Raised operator control panel on workstation side - Cast iron infeed table (LxW): 2980 x 255 mm Table height from floor: 900 mm - Spring-loaded side pressure infeed - Digital displays for cutting depth 1) Surfacing spindle 7.5 kW: Cutter block Ø125 x L.230 mm 2 & 3) Right & left vertical spindles 12 kW each: Cutter block Ø125 x L.130 mm 4) Independently adjustable top horizontal spindle 11 kW: Cutter block Ø125 x L.230 mm, with adjustable pressure shoe on outfeed 5) Universal 360° spindle 11 kW: Spindle Ø50 x L.240 mm with vertical idler roller pressure FEED SYSTEM: - Variable feed: 6 to 24 m/min Feed motor: 3 kW - Helical infeed steel roller built into table Driven by cardan shafts - 7 pneumatically loaded rollers: 2 serrated steel, 3 (1 retractable) + 2 rubber-coated - Smooth steel roller on planing outfeed table OTHER FEATURES: - Power supply: 400V, three-phase + earth, 50 Hz - Total installed power: 53 kW (72 HP) IN 95.6A - Automatic star-delta starting - Braked motors - Toothed belt drive system - Motorized thickness adjustment (raise/lower beam): 0.37 kW motor - Spindle diameter: Ø50 mm - Working air pressure: min 6 bar - Extraction: 5 x Ø120 mm Recommended air flow: 6100 m³/h Nwedpfx Ajv Tzw Ejbrjh Air speed: 20 to 28 m/sec depending on timber moisture - CE marking - Lockable isolator, emergency stop buttons Machine dimensions in operation (W x H): 3000 x 2250 mm Overall dimensions: 5100 x 2000 x H.1810 mm Weight: 4300 kg Machine supplied with fitted sharpened knives, manual, spare parts list, and diagrams. Consult us for consumables, accessories, and/or extraction systems. Upon order, the machine will be overhauled, brought into compliance, and undergo dynamic functional testing. Supplied with 3-month warranty & compliance certificate. Ex-works price. Delivery and additional services available on request.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, ELECTRO-HYDRAULIC PANEL PRESS WITH OIL BOILER, MOTORIZED FEED, INFEED & OUTFEED TABLES Make: ORMA Model: LS 25/13 AF BO Serial No.: 69440202 Year: 2002 (Photos taken before servicing, functional tests & cleaning) Press specifically suited for the production of solid wood laminated panels using special adhesives. CAPACITIES: - Heated platens 2500x1300mm by oil circulation at 120°C Opening height (Useful stroke): 200 mm Maximum vertical platen pressure: 80 tonnes (2.5 kg/cm²) Maximum vertical pressure of front pistons: 40 tonnes (25 kg/cm²) - Horizontal pressing stroke: 150 mm Adjustable working thickness: 12 to 50 mm Horizontal pressure: 7.5 tonnes (7 to 10 kg/cm²) CONFIGURATION: - Heavy-duty steel frame - Motorized infeed table 2.50 x 1.40 m with rack-and-pinion pusher - 3x 2 HP hydraulic power units - Control panel with 2 foot pedals, controls for feed/horizontal and vertical working pressure/working temperature/pressing time Nodpfowxdctsx Abrswh Pressure gauges for: pressure platens, pusher stops & clamping presser - Movable lower platen with aluminum surface 6 hydraulic cylinders Ø70 mm with 4 rack-and-pinion guide balancers - Top and bottom heated circuit (internal serpentine) 24 kW electric boiler with 1.1 kW circulation pump - Independent rear clamping device comprising 3 hydraulic cylinders Ø70 mm, double rack-and-pinion guides - Lateral pressers: 5 hydraulic cylinders Ø40 mm 70x120 mm adjustable-height shoes - Outfeed roller table 1.25 m long - Complete electrical cabinet with all controls - Power supply: 400V, three-phase, 50 Hz IN 44A Installed power: 32 kW - CE marking Lockable main switch, emergency stop button Emergency stop cable Safety guards Transport dimensions (LxWxH): 3.50 x 2.40 x h.2.00 m + 2.40 x 1.80 x h.1.80 m (as shipped) Weight: 6200 kg + tables

Stanje: rabljeno, Leto izdelave: 1995, SPINDLE MOULDER WITH LONG TABLE & POWER FEED Brand: ROBLAND Model: T120S-L-P Year: 1995 Machine offered as is, without warranty SPINDLE MOULDER SPECIFICATIONS: - Spindle diameter: 50 mm Usable length above table: 150 mm Vertical stroke of spindle: 205 mm - Spindle speeds: 3000/4500/6000/7000 rpm MACHINE CONFIGURATION: - Sturdy welded steel frame - Cast iron table (LxW): 310x190 mm Side extensions: 670x250 mm Front table extension: 2460x620 mm with entry roller Table rings: Ø350; Ø250; Ø200 Through-table tool capacity: Ø320 x 95 mm - Wooden fence jaws: 530x150 mm Fine adjustment for hood and stop barrels Maximum tool diameter for fence work: Ø250 mm Nwjdox Igzqjpfx Abrjh TENONING: - Sliding tenoning carriage 760x500 mm Equipped with graduated crosscut fence with adjustable stop Adjustable stabilizers ensure perfect rigidity of the carriage slide. - Adjustable tool approach support with eccentric clamp - Fence angle adjustment graduated from 0° to 45° - Tenoning guard - Max tenoning tool diameter: Ø350 mm Fitted with power feeder: - Brand: Polymatic Year: 1996 - Power: 0.75 kW - 3 rubber feed rollers - 2 feed speeds mechanical x electrical OTHER FEATURES: - Power supply: 380V, 3-phase + ground, 50 Hz - Manual star-delta starter - Installed power: 6.25 kW - Motor power: 5.5 kW (7.5 HP) - Lockable isolator, emergency stop button - Guide fence protector - Dust extraction for spindle hood Ø120 mm Bottom port Ø120 mm Dimensions (LxWxH): 270x165x165 cm Weight: 800 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, HYDRAULIC VENEER GUILLOTINE SHEAR Brand: TORWEGGE Model: 3200 Hydro Year: 1980s Machine upgraded to compliance standards (DEKRA inspection 03/2023), operational, offered as-is, without refurbishment. Test video available from July 2024 MACHINING CAPACITIES: - Cutting length: 3200 mm - Max. cutting width: 60 cm - Passage height: 100 mm - Clamping pressure: 50-70 kP/cm² COMPOSITION: - Robust welded steel frame - Precision-ground cast iron support table Front space: 40 cm Floor to tabletop (working height): 0.9–1 m depending on installation Front lighting - Control panel mounted on articulated arm - Rear table with 2 auxiliary extensions (DxW) 1 x 1.35 m Electrically operated pusher fence Usable length: 2.12 m, Support spacing: 30 cm Manual fine adjustment Linear scale dimension indicator 2 scrap ejectors ELECTRICAL CHARACTERISTICS: Nwjdpfx Aorx S Ucsbrsh - Main supply: 400V, 3-phase + N, 50Hz - Installed power: approx. 15 kW (2 motors, hydraulic pump, and pusher) Machine supplied with electrical diagrams 2 boxes with blades OPERATOR SAFETY: - Lockable main disconnect switch - Emergency stop buttons - Two-hand safety control device - Front light curtain - Key lock for blade change - Safety interlocks on removable covers - End-of-cycle ejectors for discharging workpiece onto the table TRANSPORT DIMENSIONS (LxWxH): - Main frame: 4800 x 1300 x h.1750 mm Approx. weight: 3000 kg - Rear fence, on pallet: 2.20 x 1.20 x h 1.00 m Approx. weight: 300 kg Fully functional machine offered without further refurbishment.

Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt size: 420x1800 mm (please consult us for supply) MACHINE CONFIGURATION: - Roller table, underside belt processing Table height from floor: 90 cm - Automatic workpiece detection by sensor - Pneumatic pressure sanding pad - Automatic belt rotation direction change MACHINE FEATURES: - General power supply: 400V, 3-phase, 50Hz, IN 22A (35A protection) - Automatic star-delta starter - Ammeters for monitoring power consumption Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic roller tensioning, oscillation, and retraction - Pneumatic supply: 6 to 8 bars - Extraction, 2 lower outlets Ø150 mm Recommended airflow: 2200 m³/h Velocity: 20 m/s Nsdjx A Unxspfx Abrjwh - CE marking, front/rear emergency stops, lockable isolator switch NOTE: For your satisfaction, we remind you that belts should be slackened when the machine is not in use and that any humidity, including dew point inside your premises during winter, should be avoided. Machine footprint: 1500x1300x2050 h.mm Weight: 1200 kg

Stanje: rabljeno, Leto izdelave: 1993, ANGULAR PROFILING MACHINING CENTER Brand: SAC Model: P4 Serial No.: 9304 Nwodpfxerx Tcgs Abrsh Year: 1993 Model: F5 Serial No.: 93030 Year: 1993 Machines available for inspection at our workshop SPECIFICATIONS: - Cutter rotation speed: 6000 rpm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, številka stroja/vozila: AA1/016854, Funkcionalnost: popolnoma funkcionalen, 3-AXIS DRILLING & MILLING CENTER Brand: SCM Model: TECH Z2 Ref. R0410.01 Serial number: AA1/016854 Year: 2012 (Photos taken prior to overhaul, functional testing & cleaning) MACHINING CAPACITIES: - Maximum workpiece height (thickness): 160 mm - Maximum workpiece length: 2700 mm In twin station mode: 1210 mm - Maximum workpiece width: 1300 mm Motions: - X axis travel: 3060 mm, Y axis: 1735 mm, Z axis: 250 mm - Maximum traverse speeds (vectorial): 60 m/min MACHINE CONFIGURATION: - 6 beams with pneumatic clamping for vacuum pods, e.g. 120x120 or 55x120 mm - Automatic lubrication unit - Spindle aggregates as follows: Nodpsv Tzrvjfx Abrewh (X-axis movement by rack and pinion, Y-axis by ball screw; high precision linear guides with automatic lubrication) • Milling/Routing unit, 11 kW (15 HP): - Spindle speed 1500 - 24000 rpm, variable speed, clockwise/counter-clockwise - Tool holder interface: HSK63F, ER32 collet - Onboard magazine for 8 tools - Perimeter dust extraction hood • 18-spindle drilling unit: - 12 independent vertical spindles (8 in X direction, 5 in Y direction) - 6 horizontal spindles (4 in X, 2 in Y) - Center distance between spindles 32 mm for M10/Ø11 mm drill bits - Rotation speed 4000 rpm - Pneumatic vertical stroke 60 mm - Perimeter dust extraction hood • Integrated grooving saw-milling group: - Blade Ø120 mm, thickness 6 mm - Speed 6000 rpm - Pneumatic vertical stroke 60 mm • Mobile operator panel on support arm with control PC: – Operating System: Windows XP – 17" LCD screen – Ethernet connection – Machine interface software: Xilog and Maestro OTHER FEATURES: - Main electrical supply: 400V, 3-phase+N+PE, 50Hz, IN37A - Electrospindle motor: 12 kW - Drilling/grooving motor: 2.2 kW - 1 vacuum pump 2.4 kW: 90-108 m3/h - Pneumatic supply >=7 bar - Extraction: Extraction ports: 2x Ø150 mm (1 port Ø200 mm using installed splitter) Recommended extraction: 30 m/s – 3400 m3/h - CE compliant machine with safety area and light curtain safety barrier Operating dimensions with safety area: see documentation extracts Transport dimensions: to be specified during equipment preparation Estimated total weight: 2200 kg Machine supplied with instruction manual and software, spare parts list, electrical and pneumatic diagrams. Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine overhauled, brought up to compliance, with quality control and dynamic functional testing. Supplied with 3-month warranty & statement of CE compliance. Available from stock (subject to prior sale). Price ex works. Delivery and additional services on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, 4-AXIS MILLING AND ROUTING CENTER TOOL CHANGER FOR 9 TOOLS Brand: POUWELS Model: DEF 1000 Type: SPEEDO Serial No.: 135 Year: 2011 (Machine set up and available for viewing at our workshop by appointment) The DEF 1000 router is designed exclusively for routing all types of wooden workpieces. It is specialized for staircase manufacturing. MACHINING CAPACITIES: Travel (machining strokes): - X-axis travel: 6000 mm (installed option) Y-axis travel: 1000 mm Z-axis vertical stroke: 380 mm - Max. movement speeds: X-axis: 75 m/min Y-axis: 75 m/min Z-axis: 30 m/min - C-axis rotation: -90° to +90° Nwjdslc Hzwspfx Abrjh MACHINE CONFIGURATION - Windows 7 Pro PC control desk - Ethernet hub - Manual or programmed control mode: Pouwels Prostair software, direct connection with Autocad 2008 Control system: Num 1050 Digital Drive - 3-axis routing heads, 7.5 kW – 0 to 24,000 rpm - Horizontal routing head with rotation (C axis), 7.5 kW – 24,000 rpm - Fixed lateral tool changer for 9 tools, HSK63 F ER32 collets OTHER FEATURES: - Power supply: 400V 3-phase + N + PE - Installed power: 15 kW Max current 37.5A - Suction cups: Ø180mm and Ø120mm, height 70mm - One vacuum pump, 170 m3/h - Pneumatic supply: 8 bar - CE compliance - Dust extraction: centralized outlet Ø 250 mm - Recommended airflow: 8,000 m3/h (min. 5,500) Dimensions: 8,300 x 3,500 x 2,050 mm Weight: 8,560 kg Please contact us for consumables, accessories, and/or dust extraction systems. Machine offered as-is. Price ex works, excluding VAT. Delivery and additional services available on request.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, OBRATOVNE ZMOGLJIVOSTI: - Dletenje 30x30 mm, največja globina 150 mm - Vertikalni hod (os z) max. 300 mm, nastavitev z omejevalniki - Prečni pomik (os y) max. 300 mm (290 mm z vodilom), čelno in z ročnim kolesom - Vzdolžni pomik (os x) max. 300 mm, ročno s pnevmatskim vpenjanjem SESTAVA STROJA: - Okvir iz varjenega jekla - Oporna miza 2 m z valjčnimi podporami 40 cm - Vodilo z omejevalnikom 2000 x v. 110 mm - 2 pnevmatska pritiskača - Višina delovne površine 1 m (nastavljiva) - Samodejna mazalna enota s ciklom OSTALE TEHNIČNE ZNAČILNOSTI: - Napajanje 400V, 50Hz, trifazno N+T, zaščita 16A Nodpfjx Rz Dxox Abrswh - Vgrajena moč 3 kW - Odsesavanje: 1 zgornja priključna cev Ø95 mm (za cev Ø100 mm) - Potreben je tlak zraka 7 barov - CE znak, zaklepno glavna stikala - Skupne mere (d x š x v): 2,10 x 1,10 x v. 2,20 m - Teža 350 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0803024, višina skobljanja: 130 mm, premer vretena: 50 mm, širina skobljanja: 230 mm, največja hitrost vretena: 6.000 obr/min, The machine is provided free on truck (loaded). TECHNICAL DETAILS Max. workpiece dimensions: 130 x 230 mm Thicknesses: 10 to 130 mm Widths: 15 to 230 mm Minimum length for single piece: 600 mm Minimum length with use of universal lantern: 760 mm Maximum cutting depth: 10 mm Spindle speed: 6,000 rpm Spindle diameter: 50 mm Nwedjxa Dzijpfx Abrjh MACHINE DETAILS Dimensions & Weight Operating dimensions (W x H): 3,000 x 2,250 mm Dimensions: 5,100 x 2,000 x 1,810 mm Weight: 4,300 kg General power supply: 400 V, three-phase + PE, 50 Hz Installed power: 53 kW Current consumption: 95.6 A EQUIPMENT Five tool holders with reinforced motors 3.00 m chrome table Sound-insulated and secured covers with gas springs Digital counters (type Siko) for precise manual adjustment Raised, user-side control panel Cast iron infeed table (L x W): 2,980 x 255 mm Side-mounted, spring-loaded feed device Digital cutting depth indicators Five spindles with detailed power distribution Pneumatic pressure rollers Soft and drawn steel rollers Smooth steel roller at discharge Overhauled and mounted knives Operating manual List of spare parts and wiring diagrams