Tezsan M35 Es nakup rabljenega (7.922)

Stanje: rabljeno, Leto izdelave: 1989, Drilling capacity in steel (diameter) / mm Ksdpfx Aov H Er Hsbxjlu Throat / mm Quill stroke / mm Total power requirement / kW TEZSAN M35 ES column drilling machine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 35 t, obratovalna hitrost: 10 mm/s, širina mize: 60 mm, skupna višina: 2.510 mm, skupna masa: 3.250 kg, pomik osi Y: 590 mm, delovna širina: 1.250 mm, hitrost zadnjega prislona os R: 150 mm/s, Razdalja pomika zadnjega prislona, os R: 100 mm, pomik zadnjega naslona os Z: 1.000 mm, vrsta nastavitve višine: električni, hitri pomik os Y: 110 m/min, delovna dolžina: 1.250 mm, Servo-electric press brake SAFANDARLEY type E-Brake Premium 35-1250 ES Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. Klsdpfxev Eam Ne Abxou - Servo-electric drive - 300 mm stroke - CNC control in Y1 / Y2 / X / R axes - 2-axis CNC backgauge - X and R axes - 2D graphic control - EC20 model - Programmable light curtain - WILA tooling system - upper clamp - WILA tooling system - lower clamp, suitable for 4V / 2V / 1V / T-type dies with 60 mm base Machine in very good condition, after manufacturer’s technical inspection. Max. pressing force kN: 350 Max. bending length mm: 1,250 Max. installation height Q, standard (without tool/table adapters) mm: 650 Max. press stroke mm: 300 Upper beam positioning accuracy mm: +/- 0.01 Max. programmable correction for Y1 - Y2 mm: +/- 2.50 Max. Y-axis approach speed* mm/sec: 180 Max. bending speed* mm/sec: 10 Max. return speed mm/sec: 180 X-axis positioning speed mm/sec: 350 Max. backgauge travel - X axis mm: 550 Max. backgauge travel (second stop point) - X axis mm: 575 Max. backgauge travel (third stop point) - X axis mm: 1,000 Backgauge positioning repeatability mm: +/- 0.02 Max. backgauge travel - R axis mm: 150 R-axis positioning repeatability mm: +/- 0.10 R-axis positioning speed mm/sec: 100 Weight kg: 3,250 Connected load kW: 11 Machine length mm: 2,230 Machine width mm: 1,775 Machine height (transport dimensions) mm: 2,510 Main voltage 3/N/PE 50Hz – 400/230V Machine connected - available for presentation at our Warsaw headquarters. Available immediately.

Stanje: pripravljen za uporabo (rabljen), Faithfull Printing Equipment Digithick TM-353, visokoprecizna merilna naprava za debelino, SN:602262 + pomožna miza 1040 x 520 x 760 mm, rabljeno, običajni znaki uporabe, popolnoma funkcionalno, obseg dobave po fotografijah. POZOR: Stroške embaliranja in pošiljanja prosim povprašajte posebej! Ksdpjx Eq Hrsfx Abxjlu

Stanje: pripravljen za uporabo (rabljen), Siemens 6ES7357-4AH03-3AE0 FM357-2 system firmware L, Version: 05.03.01, SN: T-SNDU00418 installed on 6ES7951-1KM00-0AA0 memory card, E-Stand: 2, SN: SVPS7113243. The front plastic cover is missing (see photo). Used, with normal signs of wear, 100% fully functional. Scope of delivery as per photos. Klsdpfxep Ehdms Abxju

Leto izdelave: 2021, stanje: dober (rabljeno), 1 complete granulation line, cutter compactor/extruder combination, tangential, operated in single-shift mode since 2021 with production waste, including DPE regrind/Alu (pipe material) The plant consists of: - Hydraulic roll cutter, 140 cm width, for roll diameters up to 60 cm, drive 18.5 kW - Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with time switch - Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic pusher, 74 reversible cutting crowns on rotor, discharge and inclined screw conveyor - Roll feed for heavy rolls with longitudinal cutting device to reduce load on mill, frequency-controlled drive 3.5 kW - Cutting mill with 11 kW, downstream for parallel operation shredder / roll feed, extraction/conveying blower to buffer silo with agitator, frequency controlled for discharge quantity/dust coverage - Screw feeder for ground material - Conveyor belt L 9 m x W 80 cm, metal detector bridge, frequency controlled via load on cutter compactor. - Screw conveyor for 100% ground materials, stainless steel, L 4.5 m and diameter 100 mm - Cutter compactor 138 kW, frequency-controlled, extraction blower, water spray cooling, tangential to extruder ES 180 mm 30 LD with dual vacuum degassing, incl. - Laser filter LF with 500 mm diameter / 2-disc system, discharge screw for contaminants with timer, melt pressure transducer, spare screens: 60mesh, 2x 70mesh - Strand die with 26 holes – interchangeable dies, year of manufacture 2021, melt pressure sensor, full overhaul/exchange of wear parts in January 2026 - Strand cooling water trough L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023 - Strand pelletizer SG 200 E with 7.5 kW and 1x spare pelletizer 5.5 kW for quick changeover during overhauls or cleaning/maintenance work - Pellet classifier sieve, stainless steel, including blower and pipework - BIG BAG filling frame, 2-place, with stairs and platform - BIG BAG floor scale with receipt printer - Throughput dependent on material, up to 900 kg/h Kedpfx Abozb Dr Sjxolu - Start-up and commissioning by our technicians, details and costs on request – as agreed - Inspection available in Wuppertal, appointments can be arranged at short notice

Stanje: rabljeno, največja dovoljena obremenitev: 27.940 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2012, naslednji pregled (TÜV): 08/2024, dolžina tovornega prostora: 8.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.070 mm, prostornina tovornega prostora: 40 m³, Oprema: ABS, * ABS * Lift axle * Folding underrun protection * Disc brakes * Alloy wheels * SAF axles * Front support ----Body: High-volume steel rear tipper body, capacity approx. 40 m³, front platform, combination door (tailgate + rear door) with pneumatic locking, grain discharge chute, tarpaulin cover. Kedpstv Tciofx Abxslu Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT WARRANTY, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. Our General Terms and Conditions (see Legal Notice) are the basis for all purchase agreements, invoices, pro forma invoices, orders, and sales consultations.

Stanje: dober (rabljeno), Polar Mohr 78 ES rezalnik papirja Stroj v zelo dobrem stanju, servisiran in pripravljen za uporabo. Izdelan v Nemčiji. Klsdey Tu Tlepfx Abxou Tehnične specifikacije: Širina reza: 780 mm Višina kupa: 120 mm LCD zaslon Napajanje: 400V Teža: 1400kg Stranske mize Kromirana površina mize Osvetlitev mize in optična rezalna linija Neomejeno nastavljiv pritisk Dodatni zadnji pokrovi mize Rezervni nož, rezalne letve, kladivni blok in orodje za uporabo.

Stanje: rabljeno, največja dovoljena obremenitev: 32.610 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, naslednji pregled (TÜV): 11/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with those available immediately and at short notice on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with through crossmembers, designed for high point loads Coupling System: * 2-inch kingpin Underrun Protection: * Bolted design, compliant with EC regulations Side Guard: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and single-sided operation, positioned FR right Axles: * 3 x 9 t air suspension axle units * Disc brakes * Make: Gigant Brake System: * Two-line air brake system complying with EC, featuring EBS and RSS, automatic load-dependent braking force distribution * Spring brake cylinders as parking brake * Mix-up-proof coupling heads permanently mounted on the front beam, without connecting line to tractor unit * Make: Wabco Tyres: * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Holder: * 1 double basket with mounting kit for a spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.5 t * Outer frame drilled approx. every 500 mm for lashing straps Front Wall: * Reinforced steel construction, fixed * Interior covered with approx. 9 mm phenolic overlay plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Lighting System: * EC compliant, 24 volt, with multi-chamber tail lights * LED side marker lights * LED front position lights (white) * LED rear outline lights * Number plate lights * 1x 15-pin and 2x 7-pin sockets on front beam Painting: Ksdpfx Aswyhy Esbxjlu * Chassis and front wall cleaned by sandblasting, primed, and painted in solid color * Chassis: RAL 3002 carmine red * SSV: aluminum anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Rims: silver Incl. special equipment: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * 20 stakes made from galvanized tube 80/50, total length approx. 1,000 mm * Interior of the front wall with magazine for 20 plug-in stakes * Container locks for 1 x 40' and 2 x 20' containers, flush with rear * Container locks for 1 x 20' container centered * Work lamp on lamp bracket (activated via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Stanje: novo, največja dovoljena obremenitev: 36.200 kg, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles, including those available for immediate and short-term delivery, on our website. Excerpt from equipment list. Full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross-members, designed for high point loads * Underride guard nose, approx. 700 mm wide * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at front approx. 130 mm * Coupling device with 2-inch kingpin * Bolted underrun protection according to EU standards * Lateral protection according to EU standards, made from anodized aluminum profiles * Landing legs 2 x 12 t * Landing legs with compensating feet and one-sided operation on right side (travel direction) * Axles: 3 x 9 t air suspension axle unit * Disc brakes 22.5, total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Brake system: * Two-line compressed air brake system according to EU standards with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Anti-swapping coupling heads fixed on front crossmember; no connecting line to the truck Tyres: * 6 units, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand at our discretion * Tyre pressure monitoring (TPMS) via EBS CAN bus system Load securing: * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * In the outer frame, holes approx. every 400–600 mm for attaching tension straps Front wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Lined inside with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed into outer frame with galvanized omega steel profiles Kodpfx Aszahp Esbxjlu Lighting system: * According to EU standards, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights, white front * LED outline marker lights rear * Licence plate lights * Lane keeping lights LED * 1x15- and 2x7-pin plug connections on the front crossmember Equipment: * 2 wheel chocks with brackets * Warning signs ECE 70 * Bracket for rotating beacon including beacon * 2 rubber bumpers at rear * Folding and extendable ladder at rear right (without platform) * 1 open box made of perforated sheet, crosswise to driving direction, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Paintwork: * Front wall: RAL 3002 carmine red * Chassis: Hot-dip galvanized * Outer frame: hot-dip galvanized + RAL 3002 carmine red * SSV: aluminum anodized * Underrun protection: white (RAL 9016 traffic white) * Mounted parts: galvanized/KTL black * Rims: silver Including special equipment: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading area * 20 stakes made of galvanized tube 80/50, total length approx. 1,200 mm * Magazine inside front wall for 20 plug-in stakes * Container locks for 1 x 40' and 2 x 20' containers, flush with rear * Container locks for 1 x 20' container, centrally positioned * Work lights on lamp bracket (activated via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each left and right

Stanje: novo, največja dovoljena obremenitev: 34.350 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Partial list of equipment. Full equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with reinforced crossmembers, designed for high floor and point loads, with heavy-duty outer frame * Rear loading floor as steel welded construction, with two welded-in external drive tracks made from 5-hole steel sheet (Lohr/Rolfo hole pattern system), approximately 2,250 mm long, hydraulically lowerable by approx. 350 mm * Rear of the vehicle features an integrated loading platform, extendable by approx. 1,500 mm hydraulically; steel welded construction with 5-hole steel sheet cover (Lohr/Rolfo hole pattern system), integrated lights, two ramp storage compartments, and ramp supports * Rear end drive and control via electrical-hydraulic power pack, mounted in a stainless steel box on the left side of the chassis, with radio remote control * Power supply from the tractor unit’s vehicle battery (NATO socket on the front wall, without connecting cable to the truck) Coupling Device: * 2-inch king pin, replaceable from below Underride Protection: * Fixed installation as per EU regulations Landing Legs: * 2 x 12 t support legs with 2-speed gear Axles: * 3 x 9 t air-suspended axle units * SAF brand with disc brakes approx. 370 x 45 mm * ABS * 10-hole centrally located wheel bolt circle, ET120 * Total air suspension stroke approx. 310 mm, with lift approx. 220 mm and lowering approx. 90 mm * Air suspension control via hand lever with stop function Lifting Axle: * 1st and 3rd axles can be lifted automatically, also manually via control at the chassis frame or via PIN 12 of the light socket Tyres: * 6 units, 445/45R19.5, fitted on 14.00x19.5 rims, 10 holes, ET120 Mudguards: * As per EU standards, 1/4 PVC mudguards * 1st axle front and rear; 2nd and 3rd axles rear Brake System: * Wabco brand * Dual-circuit braking system in accordance with EU regulations, with EBS and automatic load-dependent control * Spring-actuated parking brake active on 2 axles * Reversed coupling heads solidly mounted on front crossmember, no connection line to truck Lighting Equipment: * As per EU standards, 24 Volt * Multi-chamber tail lights * Number plate lights * LED side marker lights * White LED position lights at the front and LED lane marker lights at the rear * 15-pin socket and 2x7-pin sockets firmly attached to the front crossmember, no connecting lines to truck Load Securing: * 9 pairs of foldable lashing rings evenly distributed, traction approx. 8 t * 8 pairs of foldable lashing rings evenly distributed, traction approx. 2.5 t * 2 pairs of foldable lashing rings at the rear, traction approx. 2.5 t * On the outer frame, holes for lashing straps every approx. 500 mm Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Klsdpfxswt Iyle Abxsu Stake Pocket Sockets: * 8 per side recessed into the outer frame * 4 rows of sockets transversely across the loading area Floor: * Approx. 28 mm Z-hardwood floor, recessed in outer frame Front Wall: * Solid front wall * Storage for 16 plug-in stakes approx. 100/40 * Front wall bolted to head frame Equipment: * 2 wheel chocks with holders * 2x PVC toolbox, approx. 600/400/500 mm * Rear rotating beacon holder incl. beacon * 2 LED reversing lights (at rear) * 2 aluminum loading ramps, approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair

Stanje: novo, največja dovoljena obremenitev: 37.350 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment features. Full equipment specification available on request. Chassis: * Welded construction using high-quality steel profiles with through cross-members, designed for high floor and point loads, equipped with heavy-duty outer frame * Rear loading deck as a steel welded construction with two welded-on external driving tracks made of 5-hole steel plate (Lohr/Rolfo pattern) over a length of approx. 2,250 mm, hydraulically lowerable by approx. 350 mm * Integrated at the rear of the vehicle is a hydraulically extendable loading platform (approx. 1,500 mm) as a steel welded construction with 5-hole steel plate (Lohr/Rolfo pattern) cover, lighting mount, and two ramp compartments with ramp supports * Rear operation and control via an electric-hydraulic unit mounted in a stainless steel box on the left side of the chassis, operated by remote control * Power supply via the towing vehicle’s battery * NATO socket on the front wall (no connecting cable to tractor unit) Coupling device: * 2-inch kingpin, replaceable from below Underrun protection: * Fixed installation compliant with EC regulations Landing legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 10 t air suspension axle units, SAF brand with disc brakes approx. 370 x 45 mm, ABS, 10-stud hub-centered ET120 wheel connection, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), air suspension controlled via hand valve with stop function Steering axle: * 3rd axle as trailing steering axle with manual and automatic reverse lock Lifting axle: * 1st axle automatically liftable, additionally switchable via control on chassis frame or via pin 12 of lighting socket Tyres: * 6 units, 445/45R19.5 brand of our choice, mounted on 14.00x19.5 rims, 10-stud ET120 Mudguards: * EC-compliant, 1/4 PVC mudguards before and after the wheels on the 1st axle (front and rear), 2nd and 3rd axles (rear) Spare wheel holder: * None Brake system: * Two-line brake system according to EC with EBS, automatic load-dependent braking * Spring-loaded brake as parking brake acting on 2 axles, anti-swapping couplings fixed on front cross beam, no connecting line to tractor unit, Wabco brand Lighting system: * EC-compliant, 24-volt, multi-chamber rear lights, license plate lights, LED side marker lights, LED front position lights, and LED lane departure lights at rear, 15-pin socket as well as 2x7-pin sockets fixed on front cross beam, no connecting cables to tractor unit Load securing: * 9 pairs of folding lashing rings evenly distributed, tie-down force approx. 8 t * 7 pairs of folding lashing rings evenly distributed, tie-down force approx. 2.5 t * 2 pairs of folding lashing rings at rear, tie-down force approx. 2.5 t * Drilled holes for tension belts in outer frame every approx. 500 mm Stake pockets: * 16 stakes approx. 100/40 mm, usable length approx. 800 mm Stake pocket holders: Kledpey Up S Sjfx Abxsu * Each side 8 pockets integrated into outer frame * 4 rows of transverse stake pockets across the platform Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Front wall: * Solid front wall, stake holder for 16 stakes approx. 100/40 * Front wall bolted to head frame Equipment: * 2 wheel chocks with holders * 2 PVC toolboxes, approx. 600/400/500 mm * Rear beacon holder including lamp * 2 pcs LED rear ...

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, prva registracija: 12/2020, skupna dolžina: 13.200 mm, skupna širina: 2.550 mm, skupna višina: 3.600 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5, medosna razdalja: 9.730 mm, barva: drugo, Leto izdelave: 2020, Oprema: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Hydraulic system = Notes = Number of axles: 3, twin tyres, payload: 36,740 kg, unladen weight: 11,260 kg, gross weight: 48,000 kg, chassis type: complete chassis, kingpin size: 2 inch, suspension type: full air suspension, ABS, EBS, hydraulic system, body year: 2020, lowloader type: semi lowloader, loading platform length: 860 cm, gooseneck length: 340 cm, ramp length: 470 cm, ramps: electrically and hydraulically controlled, axle type: SAF, wheel coils // 2x hydraulic ramps with 24V power unit // last axle steering // 48 tons = Further Information = General Information Cab: Day cab Registration number: OX-32-GH Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Brakes: drum brakes Suspension: air suspension Kljdpfx Ajy Stc Nebxou Axle 1: tyre size: 235/75R17.5; twin tyres; lift axle; tyre tread left inside: 8 mm; left outside: 8 mm; right inside: 6 mm; right outside: 9 mm Axle 2: tyre size: 235/75R17.5; twin tyres; left inside: 12 mm; left outside: 10 mm; right inside: 10 mm; right outside: 10 mm Axle 3: tyre size: 235/75R19.5; twin tyres; steered; left inside: 9 mm; left outside: 9 mm; right inside: 11 mm; right outside: 9 mm Weights Unladen weight: 11,260 kg Payload: 36,740 kg Gross weight: 48,000 kg Environment Emission class: Euro 0 Maintenance APK (Roadworthiness Inspection): valid until 02.2027 Condition Technical condition: good Visual condition: good Damages: none Financial Information Leasing price: €918 per month (default, 60 months); please enquire for additional information and terms = Company information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, years of manufacture, and price categories. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognisable quality • Good prices • Professional business standards • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The confidence of ‘recognisable quality’ • And more…. Please visit our website for special offers and full inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an enquiry via our website. Ask directly for our European warranty package.

Stanje: rabljeno, Proizvajalec: Tennant Company (ZDA) Model: M20 Klodpfxswf E Drs Abxeu Tip: Industrijski pometač in čistilni stroj (kombinirana naprava) Pogon: dizel, utekočinjeni naftni plin (LPG) ali baterija (odvisno od različice) Delovna širina: - Glavne krtače: približno 1020 mm (40 palcev) - S stranskimi krtačami: do 1400 mm (55 palcev) Prostornina rezervoarja za čistilno raztopino: 303 litrov Prostornina rezervoarja za umazano vodo: 360 litrov Delovna hitrost: približno 8 km/h Približna masa (prazna): približno 2.177 kg Približne dimenzije: - Dolžina: približno 2460 mm - Širina: približno 1220 mm - Višina: približno 1430 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, Centre height: 250 mm Centre distance: 2000 mm Swing diameter over bed: 500 mm Spindle bore: 50.8 mm Spindle mount: Size 6 Tailstock taper: MT 5 Klsdpjv Dhzfsfx Abxeu Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/cross 0.05-6.4 / 0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Required space: 3600 x 1100 x 1500 mm Weight: 1875 kg

Stanje: rabljeno, Leto izdelave: 2007, Extendable body: Yes Please contact Theo Lelie for further information. Ksdpfx Abeyrtm Hsxelu

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2007, skupna dolžina: 13.400 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 205/65R17.5, medosna razdalja: 9.800 mm, barva: bela, Leto izdelave: 2007, Oprema: ABS, SAF axle. 2 x steered trailing axles. Extendable. Lifting roof. Sliding roof. Klodpjy N Aw Rofx Abxou Loading bed length: 910 cm. Floor height: 80 cm. Neck length: 390 cm. = Further information = Axle configuration Tire size: 205/65R17.5 Brakes: drum brakes Suspension: air suspension Rear axle 1: twin tires; tire tread left inner: 30%; tire tread left outer: 30%; tire tread right inner: 30%; tire tread right outer: 30% Rear axle 2: twin tires; tire tread left inner: 30%; tire tread left outer: 30%; tire tread right inner: 30%; tire tread right outer: 30% Rear axle 3: twin tires; tire tread left inner: 30%; tire tread left outer: 30%; tire tread right inner: 30%; tire tread right outer: 30% Rear axle 4: twin tires; tire tread left inner: 40%; tire tread left outer: 40%; tire tread right inner: 40%; tire tread right outer: 40% Weights Unladen weight: 9,940 kg Payload: 37,660 kg Gross vehicle weight: 47,600 kg Identification Type number: 4STL48 / 4 AXLE / SLIDING ROOF / = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We do our best to provide accurate information, but no rights can be derived from the published texts.

Stanje: novo, največja dovoljena obremenitev: 15.825 kg, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.550 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Oprema: ABS, Our entire vehicle inventory with immediately and short-term available vehicles can be found on our website. Excerpt of the equipment. Full specification available on request. Chassis: * Steel welded construction with welded longitudinal beams and interlocked Z-crossbeams, close crossbeam spacing for high floor load capacity * Ramp holder between the longitudinal beams behind the axle assembly, under the load floor, with two insertion pockets for one ramp each, with closure plate in the rear header Underrun protection: * According to EU regulations Landing gear (front): * Landing legs with single-side operation Rear support: * Two adjustable drop supports Axles: * 2 x 10 t air suspension axle assembly, brand: SAF, drum brakes approx. 300 x 200 mm, centrally aligned wheel connection for twin tires, ABS, total air suspension lift approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via hand lever with locking function Tires: * Dual, 235/75R 17.5 – brand of our choice, on steel rim 6.75 x 17.5, fitted with ET Mudguards: * PVC, fitted before and after axles in accordance with EU regulations Load securing: * On the outer frame, boreholes every approx. 150 mm for lashing straps, lashing force approx. 2.5 t (lashing straps can be hooked in with closed sideboards, beveled outer frame) * 6 pairs of folding lashing rings, evenly distributed, lashing force approx. 8 t * Stake pockets for removable stakes 80/50: 3 pairs of stake pockets in the outer frame, evenly distributed Brake system: * Pneumatic brake system in compliance with EU regulations with EBS * Two spirals as connection to the truck tractor, with red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor, recessed in the outer frame Front wall: * Made of 25 mm sideboard, removable Lighting system: * Lighting equipment in accordance with EU regulations, 24 Volt, multi-chamber rear lights, license plate lights, side marker lights and lane departure lights at the rear, terminal panel on the left side of the drawbar including connection cable with 15-pin and two 7-pin connectors Accessories: * 2 chocks with holders * Detachable revolving beacon at the rear * Additional 40 mm towing coupling supplied (max. gross weight 13,500 kg) Painting: * Chassis shot-blasted, cleaned, and premium hot-dip galvanized using the latest technology * Body components cleaned, primed, and hot-dip galvanized Chassis: * Hot-dip galvanized + RAL 3002 carmine red * Sideboards: RAL 3002 carmine red * Kinnegrip stakes: RAL 3002 carmine red * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Add-on parts: galvanized / KTL black Contour marking: * According to EU regulations, yellow on sides and rear Including special equipment: * Rear extension approx. 800 mm including underrun protection, extendable loading platform, load capacity approx. 2 t, lockable every approx. 200 mm * Mechanically adjustable drawbar in length, 6 x approx. 100 mm, with bolted towing eye approx. 50 mm according to DIN 74053 * 4 rows of crosswise stake pockets on the loading deck, evenly distributed * 12 removable stakes made of galvanized tube, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1x20' container, extendable up to approx. 2,820 mm, according to ISO 1496, EN 284 and EN 452 Klodpfxsy Auhbo Abxou * 1 pair of aluminum ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between and behind the a

Stanje: novo, največja dovoljena obremenitev: 32.155 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, with immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete equipment details on request. Chassis: * Welded construction made from high-quality steel profiles with punched cross-members. Designed for high point loads. Coupling Device: * Fifth wheel plate with 2-inch kingpin. Underrun Protection: * In accordance with EC regulations, bolted design. Side Protection: * In accordance with EC regulations. Klsdpfx Ajy Auhzobxeu Landing Legs: * 2 x 12 t landing legs with compensating foot and single-side operation (right side in driving direction). Axles: * 3 x 9 t air-suspension axle assemblies, SAF make, with disc brakes approx. 430 x 45 mm, centrally aligned wheel connection ET120, ABS, total air suspension lift approx. 180 mm (lift approx. 110 mm, lower approx. 70 mm). * Air suspension control via manual regulator with stop function. Steering: * Last axle steered automatically by rod linkage. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Brake System: * Dual-circuit compressed air brake system in accordance with EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, swap-proof coupling heads fixed to the front cross member, without connecting line to the truck. * Manufacturer: Wabco. Tyres: * 6 x, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in driver’s cab (pre-installed by chassis manufacturer). Mudguards: * In accordance with EC, 1/4 PVC fenders in front of and behind the axle assembly. Load Securing: * 9 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 8.0 t each). * 8 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 2.5 t each). * On the outer frame, holes every approx. 500 mm for lashing straps (lashing straps can be hooked in with side boards closed; chamfered outer frame). Stanchion Pockets: * 10 pairs of stanchion sockets on the outer frame, evenly distributed. * 4 rows of stanchion sockets across the loading area. * Plug-in stanchions: 20 pieces, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm. * Rack inside front wall for 20 plug-in stanchions. Front Wall: * Reinforced steel construction, fixed, lined inside with approx. 9 mm phenolic plywood (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor fitted into the outer frame. Sideboards: * 4 x 250 mm side boards and rear wall made from anodized aluminium hollow profiles, folding down and removable, removable Kinnegrip stanchions. * Sideboard and stanchion magazine: under the chassis. * Insertion rails for sideboards and stanchions on left and right. Lighting System: * In accordance with EC, 24 volt with multi-chamber lamps, LED side marker lamps, LED position lights front white, LED contour lights rear, number plate lights. * 1 x 15-pin and 2 x 7-pin socket connectors on front cross member. Equipment: * Wheel chocks with double holder. * Warning signs according to ECE 70. * Work spotlight on lamp bracket (actuated via reverse gear). * Bracket for beacon at rear, including beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paintwork: * Chassis and front wall cleaned by sandblasting, primed and top-coated in single colour. * Chassis: hot-dip galvanized + RAL colour of your choice. * Front wall: RAL colour of your choice. * Sideboards: anod

Stanje: novo, največja dovoljena obremenitev: 39.070 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from specifications. Complete specification available upon request. Chassis: * Welded construction made of high-quality steel profiles with punched cross-members. Designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling Device: * 2-inch kingpin (also suitable for 3.5-inch reception) Underride Guard: * In accordance with EC regulations, bolted design Side Impact Protection: * In accordance with EC regulations Landing Legs: * 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S foot Axles: * 3 x 9 t air suspension axle assembly, manufacturer: SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheels, offset 120 mm, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary valve with locking function, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted on lifting/lowering device bracket * Smartboard/TIM/Infocenter, no TPMS display Lift Axle: * First axle liftable, fully automatic load-dependent lift control, starting aid via button in the cab (15-pin socket PIN12). Button in cab is not included in delivery Brake System: * Two-line compressed air brake system according to EC guidelines with EBS and RSS, automatic load-sensing, spring-loaded cylinders as parking brake, non-reversible coupling heads fixed to front cross-member, without connecting line to motor vehicle, Wabco brand Tyres: * 6-fold, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), offset 120 mm * Basic version tyre pressure monitoring, connected to the EBS CAN bus system * Tyre pressure display in the cab (pre-installed by tractor manufacturer) Mudguards: * In accordance with EC, PVC mudguards (semi-shell) over all axles * Mud flaps with anti-spray Load Securing: * 8 pairs of welded hook plates in the outer frame (tensile strength approx. 3 t) * 6 pairs of lashing rings on the sides of the outer frame, evenly distributed (tensile strength approx. 10 t) Stake Sockets/Posts: * 5 pairs of stake sockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake sockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 removable posts made of galvanized square tubing, approx. 80 x 80 x 4 mm, stop at bottom Front Wall: * Bolted front wall, approx. 1,200 mm high, panelled with sheet metal Stake Magazine: * Magazine for removable posts inside front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting System: * EC-compliant, 24 volt with multi-chamber lights, LED side marker lights, LED front position lights white, LED rear outline marker lights, license plate lights * 1x15-pin and 2x7-pin sockets on the front cross-member Equipment: * Warning panel according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) Kodpjyz E T Sefx Abxjlu * Bracket for revolving beacon at rear (including beacon) * 1 rear access ladder, foldable and extendable (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of front wall * Smartboard with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the support legs (switched via revers

Stanje: rabljeno, številka stroja/vozila: W09BLH3556EE32123, Leto izdelave: 2006, Contact Theo Lelie for further information. Klsdpfoy Dgkqox Abxeu

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, In this offer, you are purchasing a used mobile coordinate measuring system "Keyence WM-3500". Scope of delivery: 1 x Keyence WM-3500 with the following equipment: - Including camera tripod - Including laptop with measurement software - Including measuring probe battery WM-B1 - Including battery charger WM-BC1 - Including transport case Condition: This is a used device that may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Kljdsv Id Uvepfx Abxsu For further information, please feel free to contact us personally.

Stanje: novo, največja dovoljena obremenitev: 56.570 kg, skupna masa: 66.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Extract from the equipment features – full specifications available upon request. Chassis: - Chassis frame construction made of welded longitudinal beams and pass-through cross members - Rear under-run bar approx. 700 mm wide - Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams - Cross member spacing max. 400 mm (for longitudinally laid floor) - King pin 3.5 inch according to SAE standard, replaceable - Outer frame as UNP 200, open to the outside Landing Gear: - 24 t telescopic landing gear JOST -MODUL CH (Heavy Duty) S-foot Axles: - 4 x 10 t SAF axles with large drum brake - 22.5 single tires - Axle distances approx. 1,700/1,810/1,810 mm - Air suspension unit, each with 10 t lifting capacity, lifting and lowering device with 1 rotary slide valve Knorr/Wabco - Holder for lifting and lowering device, bolted version Brake: - Smartboard/TIM/Infocenter at the lifting/lowering gear bracket, in addition to the lift/lower valve, without battery (operable only with towing vehicle) - Holder for light and brake at the front, mounted on the underrun bar, total height approx. 700 mm - Tire pressure monitoring basic version, connected to the EBS CAN bus system - With dual release valve for brake and spring actuator - Test nipple for brake cylinder pressure at right front brake cylinder - 1 red and 1 yellow coupling head each - Lifting/lowering device mounted in driving direction rear left - EBS braking system Wabco make, CAN bus EBS diagnostics (EBS plug), no diagnostic cable led outside! Tires: - 8 x 445/65 R 22.5 premium brand tires of our choice - Central centering Lubrication: - Grease nipple strips at the bogies and at the steering front. No central lubrication Superstructure: - Without body certificate according to DIN EN 12642 XL - 2x LED work lights on top of the front wall (facing rear), switch at the lift/lower bracket Kljdpfxewx Dcte Abxju - Front wall for platform, reinforced version - Side contour marking yellow, rear yellow - Front wall approx. 800 mm high, with sheet metal cladding, bolted version Lighting: - 2x LED work lights, mounted in lamp panel, switched via reverse gear - 2x LED work lights, switched via reverse gear, 1 each side near landing gear - 2x LED reversing lights, 1 per side in front of the 1st axle - Lighting/wiring system brand of our choice - Number plate lighting - The towing vehicle must provide sufficient electrical capacity for the chosen lighting (esp. reversing light) - Position marker lights at the front, lower, white, 1 per side left and right (LED) - 24V lighting system with large multifunction rear lamp - Side marker lights (LED) flashing - 1x 15-pin and 2x 7-pin sockets in multifunction box at the front - EBS socket output - 1 pair lane keeping lights (LED) Floor: - Hardwood floor approx. 28 mm, alternating with galvanized omega steel profiles Paint/Coating (no metallic shades): - Chassis painted in RAL color of choice - Front wall (steel construction) in RAL color of choice - Axle hubs matching chassis color - Axles and landing gear black - Wheels in aluminum/silver similar to RAL 9006 - Wheel nuts untreated - Under-run protection painted RAL 9010 pure white (aluminum) Accessories: - Lifting device for 1st axle - 9 welded lashing plate hooks per side in the outer frame, lashing capacity max. 3,000 daN each - 12 RUD-SLP lashing points per side with

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and short-term available units on our website. Extract from the equipment. Complete equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with continuous cross members, designed for high point loads * Underrun beam approx. 700 mm wide * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm * Neck height at the front approx. 130 mm Coupling Equipment * 2-inch king pin Underrun Protection * Bolted version according to EC regulations Side Impact Protection * According to EC regulations, made from anodised aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating pads and single-side operation on the right (FR) Axles * 3 x 9 t air suspension axles with disc brakes, 22.5" * Total lift approx. 180 mm Klsdpfx Absw U H Sboxou * Lifting and lowering device via rotary valve Brake System * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversible coupling heads, fixed to the front cross member, without connecting line to the tractor unit Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer at our discretion * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Mudguards * According to EC regulations Spare Wheel Carrier None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.0 t * In the outer frame, boreholes every approx. 400–600 mm for attaching lashing straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the outer frame with galvanised omega steel profiles Lighting System * According to EC regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white front * LED outline lights rear * Licence plate lights * Lane marker lights, LED * 1x15- and 2x7-pin plug sockets at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning signs * Bracket for rotating beacon, incl. rotating beacon * 2 rear rubber buffer stops * Access ladder rear right, foldable and extendable (without platform) * 1 open perforated box transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: single-colour RAL as per request * Chassis: hot-dip galvanised * Outer frame: hot-dip galvanised + single-colour RAL as per request * Centre stanchions: single-colour RAL as per request * Side underrun protection: aluminium, anodised * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised/KTL black * Rims: silver Contour Marking * Complete, yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 stanchions made of galvanised tube 80/50, overall length approx. 1,200 mm * Internal magazine for 20 plug-in stanchions on the front wall * 5 x 25 sideboards and tailboard made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion

Stanje: novo, * IMMEDIATE AVAILABILITY * Latest BJT model with many retrofitting options available: Including hydraulic tilt function, additional ramps, etc. Technical Data: • Brand: Brian James • Model: Race Sport MY2025 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Without first registration Ksdpjx Tcfcefx Abxelu • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 550 x 210 x 199 cm • External dimensions (LxWxH): 715 x 250 x 253 cm • Loading height (floor): 48 cm • Gross vehicle weight: 3,500 kg • Unladen weight: 1,445 kg • Payload: 2,055 kg • Chassis: Low loader (wheels beside the platform) • Tyres: 155/70R12 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Black body made of premium, glass fibre reinforced plastic. Lightweight yet extremely robust • Full-length daylight roof • Maneuvering grips at front and rear • Front side access doors on both sides for easier tying down of front wheels • Large lockable side access hatches on left and right (direction of travel) • Full-height, full-width rear ramp door with lockable internal rotating bar latch • Rollers at the rear of the trailer • Internal height 1990 mm – Entry height at rear 1880 mm • Perforated steel tie-down floor provides high slip resistance and is extremely wear resistant, even under the toughest conditions • Numerous lashing points and a highly durable floor offer flexible securing options and perfect grip • Closed floor plate made from multiplex • Electric winch, 12V with cable remote. 2,250 kg pulling force, with roller fairlead, winch cable and carabiner hook. Powered by an onboard battery • Very robust welded steel frame • Fully hot-dip galvanized frame • Spare wheel with holder installed • Very sturdy reinforced V-drawbar • ALKO overrun brake and parking brake • Automatic reverse • Coupling head made from cast steel with integrated ALKO high security lock • Plastic mudguards • 13-pin connector • Reversing light • Large dimensioned safety lighting • Integrated rear fog lamp • Various marker lights at front, side and rear • Heavy-duty jockey wheel • 5 years chassis warranty Accessories retrofittable – please enquire! New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document can be sent in advance, or transfer registration (Germany) can be provided - Export registration incl. customs declaration possible Descriptions and images are copyright protected!! Trailer Centre BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! We have been a specialist dealer & workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Errors, mistakes, and prior sale excepted -

Stanje: novo, * IMMEDIATE AVAILABILITY * Technical Data: • Brand: Brian James • Model: Race Transporter 7 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU: 2 years from initial registration • Internal dimensions (LxWxH): 600 x 235 x 199 cm • External dimensions (LxWxH): 770 x 255 x 264 cm • Load floor height: 58 cm • Permissible total weight: 3,500 kg • Payload: 2,069 kg • Chassis: Platform trailer (wheels under body) • Tyres: 195/55R10C • Suspension: ALKO rubber spring axle • Jockey wheel: Yes • 100 km/h type approval: Optional, can be retrofitted DESCRIPTION • Body made from high-quality, glass fibre-reinforced plastic. Lightweight yet extremely stable • Daylight roof runs the entire length of the trailer • Manoeuvring handles front and rear • Dual front access hatches for easier lashing of front wheels • Dual rear access hatches for easier lashing of rear wheels • Large double side doors on left and right, lockable • Full-height and full-width electric tailgate • 2x foldable additional aluminium ramps, 1.5m, for very low vehicles • Rollers at the rear of the vehicle • Internal height 199cm – entry height at rear 188cm Klodpfx Aeydiibebxou • Perforated load floor provides high slip resistance and is extremely wear-resistant, even under the toughest conditions. • Numerous lashing points and a highly robust floor offer flexible securing options and perfect grip. • Fully adjustable wheel chocks with quick-adjust system, suitable for lowered vehicles • Composite closed floor panel (honeycomb core plastic floor) made of a honeycomb structure finished on both sides with a surface layer. Extremely lightweight and robust. • 2x central floor storage boxes recessed into the load area, providing ideal storage for heavy or awkward objects. Aluminum lids included. • Electric winch, 12V with wireless remote control, synthetic rope and carabiner hook • Electro-hydraulic tilting load bed, can be tilted at the push of a button for optimal loading angle • Central control unit for tilt function and tailgate, in addition to remote control. Includes charge status indicator for on-board battery • Very robust welded steel frame • Frame fully hot-dip galvanized by immersion • Spare wheel with bracket fitted • Very robust reinforced V-drawbar • ALKO overrun brake and parking brake • Automatic reverse function • Cast steel coupling head with integrated ALKO high-security lock • Plastic mudguards • 13-pin plug • LED interior lighting with LED strip • Reversing lights • Large full-LED safety lighting • Side LED reversing lights • LED work light at the rear for improved loading/unloading visibility • Integrated rear fog light • Various position lights front, side, and rear • Anthracite aluminium alloy wheels • Heavy-duty jockey wheel • 5-year chassis warranty • 4 wheel lashing straps for wheel-over securing Optional Accessories Available – Please inquire! New vehicle with warranty and TÜV. We are happy to offer you suitable financing! - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle registration document pre-shipment available or temporary registration (Germany) can be provided - Export plates incl. customs declaration available - Errors, omissions and prior sale excepted -