Teka Odsesavanje Varilskega Dima nakup rabljenega (1.029)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Volume flow: 1450 m³/h Arm length: 3000 mm Duct diameter: 160 mm Total power requirement: 0.75 kW Machine weight: approx. 110 kg Space requirements: approx. 675 x 905 x 939 mm This welding fume extraction unit is NEW and has only 1 operating hour. Description: Mobile welding fume extraction unit with 160 mm extraction arm and compressed air filter cleaning Special features: Jetclean is a mobile filtration device With automatic compressed air cleaning system (including timer) Main application is the filtration of non-explosive metal dust and welding fumes. The device, built in a robust design, features a pre-chamber where most of the coarse dust particles are already separated into an initial collection container. The following labyrinth and filtering through the filter cartridge ensure the separation of the remaining dust. The fine dust is collected in a smaller front collection container. The Jet Clean DF 1 is equipped with an Evolution extraction arm, 3 metres in length including throttle valve, filter cartridge with automatic compressed air cleaning, and operating hour meter. Filter material: Polyester BIA class M Specification Description / Value Arm length 3,000 mm Arm diameter 160 mm Supply voltage 400 V Mains frequency 50 Hz Motor output 0.75 kW Crjdpfxjy Hxqze Aplob No-load speed 2,800 rpm Filter area 8 m² Filter cartridges 1 Air flow rate 1,450 m³/h Separation efficiency 99 % Noise level 72 dB Dimensions (WxDxH) 675 x 905 x 939 mm Weight 110 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, VENTA POR ENCARGO DEL CLIENTE VALCO / Sistema de extracción de humos de soldadura / Año de fabricación: 2007 Ubicación de la máquina: Kernen im Remstal, Baden-Wurtemberg. Inspección y desmontaje posibles previa consulta. El desmontaje corre a cargo del comprador. Datos técnicos: • Número de puntos de aspiración/brazos de aspiración: 21 • Control de filtros: Controlador MFD • Cartuchos de filtro: 16 unidades • Superficie de filtrado: 414 m² • Tipo de accionamiento: Accionamiento directo • Potencia nominal: 30 kW • Caudal volumétrico: 13.000 m³/h • Convertidor de frecuencia: Danfoss FC102 (sin interruptor principal) • Sistema de descarga: Descarga estándar a cubo • Depósito de polvo: Cubo para polvo de 100 litros • Elementos de aspiración: Brazos de aspiración DN-125 y DN-160 Cedpfxsy H Aymo Apljrb Más detalles técnicos en los protocolos de inspección. Nota: La venta se realiza únicamente como un conjunto completo. Otro sistema (cabinas de extracción de polvo de esmerilado) se ofrece en un anuncio separado. Sujeto a errores, erratas y venta previa.

Stanje: novo, Leto izdelave: 2026, Odvodna roka za varilni dim za stensko montažo z odsesovalnim ventilatorjem – samonosna konstrukcija z vrtljivimi zglobi Premer cevi: 150 mm Dolžina: 8200 mm (podaljšek 4000 mm + roka 4200 mm) Komplet z radialnim ventilatorjem 1,5/2800 kW/obr/min Odsesovalna zmogljivost: 1.450 m³/h Hitrost odsesovanja: 0,55 m/s Crodpoy Afufefx Apljb Teža pribl. 163 kg Odvodna roka SKAW je sestavljena iz odsesovalne glave, povezane z aluminijasto cevjo s samonosno strukturo. Zglobna povezava je izvedena prek stabilizacijskih trenj, ki omogočajo popolno pozicioniranje. 360° vrtenje je zagotovljeno z dodatnim, petim ležajem iz posebnega materiala, ki je razvit tako, da preprečuje utrjevanje ob dolgotrajni uporabi. Glava je opremljena z ročajem in zaporno/preklopno loputo za regulacijo ali popolno zapiranje toka. Ta kombinacija zagotavlja popolno združitev tehnologije in dizajna.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Volumenstrom 3000 m3/h Abscheidevolumen 99,9 % Länge Absaugschlauch 3.000 mm Druckluft 5,0 - 6,0 bar Motor 230 Volt Motor 1,5 kW Gewicht 135 kg Abmessung L-B-H 655 x 655 x 1460 mm laut Vorabgeber sehr selten im Einsatz gewesen aktueller Neupreis ca. 4.500 Euro Sonderpreis auf Anfrage Beschreibung: - KEMPER Filter-Master XL mit 1x Absaugarm - IFA-geprüft Crsdey Erxcspfx Aplsb - W3-Zulassung = geeignet für den Einsatz beim Schweißen hochlegierter Metalle - die Abreinigung erfolgt über Druckluft - leicht verfahrbar Technische Daten - Ventilatorleistung: 3.000 m³/h - Absaugleistung (max.): 1.000 m³/h - Motorleistung: 1,5 kW - Anschlussspannung: 3 x 400 V / 50 Hz - Abscheidegrad: > 99,9 % - Anzahl der Filterpatronen: 1 - Druckluftversorgung: 5 - 6 bar - Geräuschpegel: 69 dB (A) - Gewicht (ohne Absaugarm): 135 kg - Abmessungen (B x T x H): 655 x 655 x 1.460 mm Hinweis: - Gerät wird nur zum Absaugen trockener Stäube / Rauche eingesetzt - vor der ersten Inbetriebnahme die Bedienungsanleitung lesen

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SRF K 10 FM BIA W2, vrsta vhodnega toka: Klimatska naprava, skupna masa: 90 kg, vhodna napetost: 230 V, skupna širina: 640 mm, skupna dolžina: 910 mm, skupna višina: 1.640 mm, volumenski pretok: 1.000 m³/h, filtrirna površina: 10 m², sesalna zmogljivost: 1.000 m³/h, negativen tlak: 2.400 Pa, moč: 1,1 kW (1,50 KM), doseg roke: 2.750 mm, dolžina cevi: 2.750 mm, Oprema: Na voljo je tipska ploščica, ❇️ ESTA Welding Fume Extraction Unit with Extraction Arm – Mobile, High-Performance, Industrial Quality Very good condition | Fully functional | Well-maintained workshop/industrial machine ⸻ For sale is a mobile welding fume extraction unit from ESTA Apparatebau GmbH & Co. KG, featuring a long, flexibly positionable extraction arm. This unit comes from a professional metalworking business, was only used occasionally, and is in excellent technical condition. Ideal for welding stations, grinding and soldering tasks, as well as general spot fume and dust extraction. ⸻ ❇️ Technical Specifications (according to nameplate) * Model: SRF K 10 FM BIA W2 * Year of manufacture: 2004 * Voltage: 230 V * Power: 1.1 kW * Rated current: approx. 7.7 A * Protection class: IP54 * Frequency: 50 Hz * Air volume flow (Vmax): approx. 1,000 m³/h * Filter surface area: approx. 10 m² * Max. negative pressure (Pa max): 2,400 Pa * Weight: approx. 89 kg ⸻ ❇️ Features & Equipment * Mobile extraction unit on castors * Long, stable extraction arm (approx. 275 cm) with smooth-operating joints * Effective capture of welding fumes directly at the source * Robust industrial-grade build * Simple operation via main switch * CE marking * Maintenance-friendly design ⸻ ❇️ Dimensions * External dimensions of unit: Height: approx. 164 cm × Width: approx. 64 cm × Depth: approx. 91 cm * Extraction arm length: approx. 275 cm ⸻ ❇️ Condition The extraction unit is in very good, fully functional, and well-maintained condition. Minor signs of wear are present due to age and use, but have no effect on function or performance. ⸻ ❇️ Price & Market Value 1,190 Euro (net) plus 19% VAT. ⸻ ❇️ Sale & Processing Cedpfx Apjy Da Amelsrb * Sale is on behalf of customer * Invoice with VAT shown possible * Location: 72229 Rohrdorf * Loading by overhead crane available on site * Delivery possible against reimbursement of costs

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 41 h, Kot nova mobilna odsesovalna naprava TEKA Tip: Filtoo Crsdpoy Ey Rgofx Aplsb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Oprema: CE označba, Nederman dedusting system / Silo dust extractor with control unit and compressed air preparation Condition: Very good, in operation for only 2 years after commissioning in 2023, dismantled due to plant closure in 2025 Application: Extraction and filtration of dust particles in silos and pneumatic conveying systems Construction: Compact steel structure with integrated filter module Filter cleaning: Pulse-jet compressed air cleaning Mounting type: Roof-mounted on silo Use: Industrial dust extraction, bulk material handling, environmental technology Fan manufacturer: Nederman Model: FMZ 620 Year of manufacture: 2023 Power: 3 kW Explosion-proof Control unit manufacturer: Nederman Model: DFC-08M Article no.: 5512680 Year: 2023 Compressed air vessel manufacturer: RECO Gesellschaft für Industriefilterregelung mbH Model: ST148-DN25-2V-8P Year: 2023 Serial no.: FA1049979-003 Max allowable pressure: 7 bar Permissible temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure test date: 2023-05 Control cabinet: Rittal AE 1010.600 Year: 2023 Compressed air preparation: Camozzi MC202-D00 Maximum inlet pressure: 16 bar Outlet pressure: 0.5–10 bar Maximum temperature: 50°C Electrical components: ABB control/terminal enclosure Design: Dedusting system for silo applications with integrated filter unit and fan Accessories / scope of delivery: - Electrical switch cabinet with controller - Compressed air preparation unit with pressure gauge - Pressure vessel for pulse-jet cleaning - Fan with motor - Pipe connection with weather protection grille Codoyxvpfjpfx Aplorb - Wiring and pneumatic lines Available quantity: 2 units Location: Kusel, Germany

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, Volumetric flow rate: 1500 m³/h Drive motor: 380 V, 2850 rpm, 1.5 kW Extraction pipe diameter: 140 mm 3-meter sections with 3 joints, height-adjustable Intake funnel with throttle valve Required space: 1150 x 600 x approx. 2300 mm Codpjwx H Dyefx Apljrb Weight: 175 kg

Stanje: rabljeno, Leto izdelave: 2008, Tehnične podrobnosti: Število filtrirnih vreč: 5 kos Filter: 576/556 x 74 x 1050 mm Skupni tlak: 200 daPa Volumenski pretok: 1500 m³/h Crodoyt I Axjpfx Apleb Filtrirna površina: 25 m² Nazivna napetost: 460 V Moč motorja: 3,3 kW Dimenzije (D x Š x V): 1,05 x 1,28 x 2,0 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Oznaka artikla: Crsdpfeyz T Absx Apljb Odvod dima pri varjenju - Esta SRF K-10 FM BIA W2 ----- Stanje artikla: Blago izhaja iz likvidacije podjetja. Delujoče.

Stanje: dober (rabljeno), Leto izdelave: 2018, skupna masa: 1.000 kg, volumenski pretok: 2.000 m³/h, Herding odsesovalna naprava COMP 1500-8/9 SB Codpfjyrndtjx Apljrb Proizvajalec: Herding GmbH Filtertechnik Model: Herding COMP 1500-8/9 SB Letnik: 2018 Tip: industrijska odsesovalna / filtrirna naprava Pretok zraka: 2000 m³/h Teža: 1000 kg Krmiljenje: Herding MP 12 Čiščenje filtra: pnevmatsko pulzno čiščenje ID stroja: 28694 ID stroja: 28695 CE oznaka: prisotna Količina: 2

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna masa: 500 kg, vhodna napetost: 400 V, skupna širina: 1.000 mm, skupna dolžina: 1.000 mm, skupna višina: 3.250 mm, volumenski pretok: 3.000 m³/h, raven hrupa: 75 dB, filtrirna površina: 100 m², sesalna zmogljivost: 4.500 m³/h, negativen tlak: 2.500 Pa, priključek za stisnjen zrak: 5 letvica, moč: 5,5 kW (7,48 KM), vhodna frekvenca: 50 Hz, vhodni tok: 16 A, obratovalna temperatura: 20 °C, krmilna napetost: 24 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, Baujahr 2018. 5,5 kW / 11,5 A - Ausgestattet mit Softstarter und Siemens PLC-Steuerung. - PREIS INKLUSIVE: 4x 25 m² NEUE Filterpatronen, im Gerät montiert. Credsyzqpljpfx Apleb - Mit Druckluft-Abreinigungssystem, Delta P-gesteuert. - Ausgestattet mit TEKA DUSTVAC-Entleersystem, zum Entleeren in ein 200-Liter-Fass! - Ab Werk Soerendonk (NL), verladen, frei LKW. Getestet und funktionsfähig in unserer Werkstatt vorführbar. - Ausgeliefert mit Softstarter-Option inklusive. - PREIS INKLUSIVE: 4x 25 m² NEUE Filterpatronen, im Gerät installiert. - Mit Druckluft-Abreinigungssystem, Delta P-gesteuert. - Ausgestattet mit DUSTVAC-Entleersystem, zur Staubaufnahme in 200-Liter-Trommel. - Ab Werk Soerendonk (NL), verladen, frei LKW. - Verkauft wie besichtigt, keine Garantie. - Vor Ort und in unserer Werkstatt getestet, voll funktionsfähig. - Test und Besichtigung möglich.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 33639, Zelo dobro ohranjena naprava za odsesavanje varilnega dima ESTA tip: SRF p 10 Serijska št.: 33639 Leto izdelave: 1998 Codpoyr Rprsfx Apljrb

Stanje: rabljeno, Leto izdelave: 1987, Volumenski pretok / Dolžina / mm Višina / mm ESTA 100 Izvlečni ventilator Cjdpfoyrt A Uox Aplerb

Stanje: zelo dobro (rabljeno), Odsesavanje in filtracija aerosolov Proizvajalec: United Air Specialists Crodjx Rp Eqopfx Apleb Tip: Mena 2000 Com. 13051 P: 1,5 kW Vmax: nom. 1700 m³/h pg: 1500 Pa U: 400 V F: 50 Hz I: 3,3 A tmax: 65°C Financiranje preko naše banke je možno. komplett-konzept.leasingo.de Druge izdelke – nove in rabljene – najdete v naši trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, moč: 0,75 kW (1,02 KM), Naprodaj je izsesovalec plinov pri varjenju in zvočno izolirano ohišje, oba v dobrem stanju in malo rabljena. Stroj je popolnoma delujoč in ga je možno preizkusiti. Cena po dogovoru. Cjdpoyk Snmefx Aplsrb

Leto izdelave: 2019, stanje: dober (rabljeno), Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 The filter is cleaned via a microprocessor-controlled compressed air pulse system during operation, ensuring high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central filter ventilation unit, Filtercube, equipped with cartridge filters, provides an ideal solution for almost all challenges in fume and dust filtration. The fan is located on the clean air side, which minimizes explosion risk. Applications: - Central extraction system for multiple welding booths - Extraction system for welding robots - Extraction system for thermal cutting tables and grinding stations - General hall ventilation filtration (push-pull, displacement systems) - Extraction in combination with extraction tables - Extraction for grinding of non-explosive materials Specification: - 5.5 kW fan motor - Capacity: 3800 m³/h - Vacuum: 3250 Pa - Inlet diameter: 250 mm - Filter area: 100 m² - Equipped with "DUST-VAC" unit, which automatically transfers dust to a separate container - Option to order new filter cartridges tailored to specific customer needs - Complete technical documentation included. Crsdpfx Asnyhvqopljb

Stanje: dober (rabljeno), High-pressure self-cleaning extraction unit by LINCOLN for laser applications, welding, dust, and particle extraction. Equipped with a cartridge filter cleaned during operation with compressed air impulses, ensuring high efficiency of the device. High-pressure turbine motor with 5.5 kW power and a suction pressure of up to 17,650 Pa! Crsdpfeg Th S Ajx Apleb Airflow capacity: 500 m³/h.

Leto izdelave: 1991, stanje: dober (rabljeno), Dust extraction, welding fume extraction, filter ventilation, self-cleaning pneumatic vacuum dust collector, extractor for plasma cutting, laser, sandblasting, and all types of dry dusts. Donaldson Torit Model: 3DF18 Cyclo – with pre-separator Cjdpfx Apomrm Rajlorb Cartridge filter elements are pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. The fan is positioned after the filter on the clean air side, minimizing explosion risk. Cartridge filter elements. Fan power: 7.5 kW Capacity: 6,000 m³/h Vacuum: 3,000 Pa Filtration area: 378 m² Inlet diameter: 350 mm Ultra WEB cartridge filter elements – 18 pcs.

Stanje: dober (rabljeno), Leto izdelave: 2009, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-type TEKA AIRTECH P24 The primary application areas for these systems are industrial plants and welding shops where spot extraction is not feasible or where spot extraction alone is insufficient to maintain clean air in the facility. Laterally mounted channels with pick-up points capture contaminants from the air and direct it to the filtration section. Here, impurities in the form of fine particles accumulate on the surface of the cartridge filter. A pulse of compressed air automatically cleans the cartridge filters at intervals as needed. When the compressed air is released, particles collected on the filter surface are detached and fall into the dust container. Clean air is then returned to the workspace via individually adjustable long-range nozzles. Simultaneously, the output of clean air directs contaminated air from the hall toward the extraction channels. The filter is cleaned during operation by a microprocessor-controlled compressed air pulse system, ensuring high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series devices are IFA certified in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a fixed local extraction unit for welding fumes. Specifications: - Airflow capacity: 24,000 m³/h - Motor power: 15 kW - Fan housed in a soundproof enclosure - Control cabinet with electrical documentation Year of manufacture: 2009 Dimensions: - Height: 6.80 m - Base dimensions: 1.95 m x 1.90 m - Overall width: 3.60 m x 2.00 m We have several units available. Price indicated in the listing is per unit. Credpfx Ajl Dw U Djpleb

Stanje: dober (rabljeno), Leto izdelave: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-type TEKA AIRTECH P18. Crjdpfeib Dadox Aplsb Main application areas for the system include industrial plants/welding shops, where spot extraction is not possible or where spot extraction is insufficient to maintain air cleanliness in the hall. Side-mounted ducts with extraction points capture contaminated air and direct it to the filtration section. Here, contaminants in the form of fine particles cover the surface of the cartridge filter. A compressed air pulse automatically cleans the cartridge filters at required intervals. When the compressed air pulse is applied, particles collected on the filter surface are dislodged and fall into the dust collection bin. The cleaned air is returned to the workspace via individually adjustable long-range nozzles. At the same time, the flow of clean air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller using compressed air pulses during operation, resulting in high unit efficiency. Low demand for compressed air due to the "Power-Spray" system. The AIRTECH series devices are IFA certified in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as permanent, local exhaust ventilation devices for welding fumes. Specifications: Capacity – 18,000 m³/h Motor power – 11 kW Vacuum – 2,250 Pa Filtration area – 324 m² (9 filter cartridges at 36 m² each) Fan in soundproof enclosure Control cabinet with electrical documentation Noise level – 72 dB Year of manufacture – 2010 Dimensions: Height – 5.00 m Base width – 1.44 m x 1.44 m Total width with outlet ducts – 8.5 m Total weight – approx. 2,400 kg

Stanje: rabljeno, sesalna zmogljivost: 1.600 m³/h, negativen tlak: 2.800 Pa, Mobile stationary welding fume extraction unit, dust extractor, filter ESTA SRF K-15 FM Fan power: 2.2 kW (three-phase), located on the clean side Extraction arm reach: 3 m Airflow: 1600 m³/h Vacuum: 2800 Pa Option to connect a second extraction arm (2 x 140 mm inlet) The SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It offers an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate allows even large smoke clouds to be effectively extracted. The automatic filter cleaning is triggered manually—after finishing work, connect a compressed air hose to the unit and manually start the filter cleaning process. The filter cartridge is self-cleaned by compressed air pulses through a rotating nozzle, significantly extending the cartridge's service life. During welding, the unit does not need to be connected to a compressed air supply, maintaining its mobility. Crsdotpui Iepfx Apleb

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Bofa AD Oracle iQ odsesavanje dima, zračni filter, zbiralnik prahu za laser in druge naprave. Kot novo, z novimi filtri. Proizvajalec: Donaldson Bofa Tip: AD Oracle iQ Napetost: 115–230 V Neomejen pretok zraka (+/- 10 %): 410 m³/h Nastavljiv pretok zraka: 100–380 m³/h Tlak (+/- 10 %): 95 mbar Dimenzije (V x Š x G): 975 x 455 x 505 mm Teža (+/- 5 %): 65 kg Glasnost: < 70 dB(A) Frekvenca: 50/60 Hz Polna obremenitev: 12,5 A ZNAČILNOSTI • Zaslon z visokim kontrastom Crodpexf Didsfx Aplob • Prikaz pretoka zraka v realnem času • Neodvisen nadzor stanja filtra • Ventilator z visokim pretokom zraka in visokim tlakom • Oddaljena diagnostika prek USB

Leto izdelave: 1999, stanje: dober (rabljeno), DISA dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum-type for plasma, laser, sandblasting, soda blasting, shot blasting, plastics, catalyst applications, mineral processes, and all types of dry dust. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high efficiency of the unit. Fan installed on the clean air side, minimizing explosion risk. Crjdpohqd Tvsfx Aplob Highly durable filter cartridges, moisture-resistant. Aluminized, antistatic, operating temperature up to 135°C. Fan power: 11 kW Airflow capacity: up to 8,000 m³/h Vacuum: up to 4,300 Pa Filtration surface area: 128 m²

Stanje: zelo dobro (rabljeno), filtrirna površina: 50 m², sesalna zmogljivost: 650 m³/h, negativen tlak: 38.000 Pa, High-pressure fume extraction unit, dust extractor, self-cleaning TEKA filter. Plasma and laser filter. Due to its design, the system is particularly recommended for processing oily or sticky fumes and dust. The unit is equipped with an automatic impregnation system for cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high device efficiency. The extraction unit is intended for special applications where the filtered fumes and dust may be humid and adhesive. The impregnating agent absorbs moisture from the fumes, protecting the filters from clogging. In this way, the lifespan of the cartridge filters is extended. Codpfxsrhidms Aplorb After the cleaning process, the control system sends an impulse to the solenoid valve located on the upper cover of the drum filled with powder. The magnet pulse agitates the impregnation powder, which is then conveyed into the suction pipeline. The powder coats the filter surface, forming a protective layer for the filters. The unit is like new – only 126 operating hours! 7.5 kW turbine enclosed in a soundproof housing with a silencer. Capacity: 650 m³/h at a vacuum of up to 38,000 Pa! Filter surface area: 50 m² Inlet diameter: 100 mm Includes pneumatic slide, silencer, and partial piping.