Technow Prk-5000 nakup rabljenega (2.425)

Leto izdelave: 2025, stanje: novo, Pozdravljeni, Izdelujemo poševne podajalnike za les ter druge po naročilu, z robustno konstrukcijo. Vabljeni k stiku z nami. Cgedpfxsyk Hl He Ahxst Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Spoštovani, ponujamo vam naslednjo napravo za nakup: Koordinatni merilni stroj Keyence XM-5000. Stroj se prodaja z opremo, kot je dokumentirana na fotografijah in navedena v besedilu oglasa. Cgedoy Iaayepfx Ahxot Lokacija: 40764 Langenfeld POZOR! Naprava izvira iz stečajnega postopka. Prodajamo jo na dražbi za najvišjo ponudbo po nalogu upnika/banke. Gre za zaprto dražbo. O trenutni najvišji ponudbi ne dajemo informacij. Vaša ponudba postane z vnosom preko e-pošte zavezujoča. Prosimo, sporočite vašo zavezujočo ponudbo do 13.05.2026 do 10. ure. Po zaključku dražbe boste o izidu obveščeni v 72 urah.

Stanje: dober (rabljeno), 4-postajni knjižnovezni stiskalnik za lepljenje blokov MURO 4 x 5000 A4/HAD Trdna konstrukcija, vodoodporna plošča in pocinkane komponente. Stroj je v brezhibnem stanju. Tehnične specifikacije: Format: 350x320x550 (Š/G/V) Število postaj: 4 Napajanje: 230V Maksimalna poraba moči: 4kW Teža: 102kg Visoka vpenjalna sila, vztrajnika z udobnim oprijemom. Električno sušenje z dvema stopnjama moči: 2 in 4kW Vsak stiskalnik je mogoče nagniti do 45′ Konstrukcija je na kolesih za lažje premikanje. Csdpfx Ahsy Ehnasxogt

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 500 kg, Varilna vrtljiva miza, L manipulator, pozicioner, odlično stanje, z dodatnim vpenjalnim diskom vključenim. Funkcije: vrtenje, nagibanje (obrnjeno na glavo), brezstopenjsko nastavljiva hitrost. Mehanska nastavitev višine: 800 mm - 1100 mm. Iztek: 1000 mm. Gradbena višina: 1800 mm. Dolžina: 3000 mm. Širina: 1100 mm. Premer vpenjalnega diska: 1000 mm. Cjdpfoylkn Isx Ahxogt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Mobile coil cart FORSTNER AG 5000 b2mf 1500 Maximum coil width: 1500 mm Load capacity: 5000 kg Inner diameter: 360 - 630 mm Outer diameter: 1100 mm Equipped with 4-arm spindle Cgjdpfx Ahemv Hv Asxst Double-supported decoiler with hand brake and steel wheels for mobility

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: voda, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Intermediate Hose Package Standard from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator With this unit, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It is equipped with touch wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in sheet metal working. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import custom characteristics to further extend the TPS unit's functions. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Cjdpfx Aewbh Ifjhxegt Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For your information: we purchase as-new used devices, disassemble, thoroughly inspect, replace any necessary wear parts, and only after a successful test weld do we release them for sale. "All" units are clean, with no burn marks on the displays or numerous burn holes or dents over the machine! You are purchasing an item from us that is presentable and does not look completely worn out! ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment methods are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. Of course, the devices can be tested and paid in cash on site. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these systems inside out and do not sell anything we are not familiar with.

Stanje: kot nova (razstavni stroj), ►►► FRONIUS TPS 3200 SET – OFFER ✅ Scope of Delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULSE SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard-equipped with Flow Control, Thermocontrol, and coolant filter. The chiller will automatically shut down if the water cooling fails or overheats to protect the hosepack. These features alone cost approx. €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our opinion, the most sensible feed case; wire is safely stored in a closed case. ➤ Fronius Long Intermediate Hosepack – Each unit is supplied with a 5-meter connection hosepack between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach spots! The hosepack is neatly placed on a hook attached to the side of the machine. (Hooks are custom-made by us) ➤ Fronius Large Trolley – Probably the best trolley with cylinder holder on the market. ➤ Binzel Hosepack – With up/down amperage control on the torch. ➤ Earth Cable 3-4m ➤ New Messer Pressure Regulator ➤ New Drum Adapter for large wire reels This unit can weld almost all materials, including aluminium, steel, and stainless (V2A). It has pulse wire programs and is suitable for MIG brazing (CuSi), commonly used in bodywork and sheet metal workshops. Additional options available at extra cost E.g. Fronius Aw4000/Aw5000 Job Master hosepack (torch display) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the units? For your information, we purchase nearly-new used units, fully strip and inspect them, replace wear parts as needed, and only release them for sale after successful test welding. All machines are clean and have no burn or melt holes in the displays, nor are they covered in burn marks or dents! You buy from us an item that is ⭐worth seeing and not worn out! ►►►Do we receive an invoice when purchasing from you? Codpfx Ahjwbil Sjxjgt Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community EU supply, we can issue a net (tax-free) invoice. ►►►Which payment methods do you offer? Advance bank transfer or cash upon personal collection. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always keep 60-80 units in stock – exclusively Fronius, no other brands! We are experts with these machines and never sell anything we do not know inside and out.

Stanje: dober (rabljeno), Inox tank 5000 L with agitator and cooling system. In good condition. Equipped with an integrated pipe around the tank for cooling purposes. Codpjvr E N Nsfx Ahxogt

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, We are offering a high-productivity 3D printer for industrial series production. The system was last used with Alupowder AlSi10Mg. The 3D printer has already been dismantled by the manufacturer. Dismantling and function protocols are available, providing evidence that the machine was fully operational prior to dismantling. All axes are professionally secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number: S0731C0008 Year of manufacture: 08/2018 Cjdpfx Ahevu Syysxegt Laser run times: Laser 1 beam on: 5,165 hours Laser 2 beam on: 5,096 hours Laser 3 beam on: 5,023 hours Trumpf TruPrint 5000 with Powder Bed Monitoring and Melt Pool Monitoring included Filter system Accessories: 2x build cylinders 3x dosing cylinders 1x overflow container (used) 1x overflow container (NEW) Manuals 4x heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzers + sensors (NEW) 1x oxygen sensor (NEW) And much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for container changing is also in stock and can be offered as an option. Faster path to high-quality 3D components The highly productive, semi-automated 3D printing system TruPrint 5000 optimally equips you for industrial series production. With features like an optional 500°C preheating and full-field multilaser configuration with three 500-watt TRUMPF fiber lasers, you are ideally prepared for the most demanding industrial applications. The machine quickly and reliably manufactures high-quality parts from various metallic materials and meets high quality standards in tool and mold making, including 3D printing on preform blanks, in aerospace, as well as in medical technology. Optionally, the entire process chain can operate under an inert gas atmosphere: sieving, printing, cooling, depowdering. Combined with external part and powder management and TRUMPF monitoring solutions, it is perfectly suited for industrial additive series manufacturing. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. For this, additively manufactured component structures are built onto a blank. This innovative feature is particularly suited for straightforward handling in tool and mold making. TruPrint 5000 Build volume (cylinder): Ø 300 x H 400 mm Ø 290 x H 390 mm (reduced when preheating >200 °C) Processable materials: Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based or titanium alloys Build rate: 5 – 180 cm³/h Layer thickness: 30 – 150 μm Maximum laser power at the workpiece (TRUMPF fiber laser): 3 x 500 W Laser spot diameter: 100 – 500 μm Minimum measurable oxygen content: up to ...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, številka stroja/vozila: B0508A0463, TRUMPF TruBend Cell 5000 – Komórka gięcia zrobotyzowanego | Rok produkcji: 2015 Prasa krawędziowa TruBend 5230 Zrobotyzowany system gięcia BendMaster Sterowanie: TASC 6000 (programowanie robota i prasy przez interfejs maszyny) Parametry prasy krawędziowej: Siła nacisku: 230 ton Długość gięcia: 4250 mm Rok produkcji: 02.2015 Cgjdpfxew Eilye Ahxjt Numer seryjny: B0508A0463 Czasy pracy: Czas załączenia maszyny: 33 789,3 h Układ hydrauliczny: 8 528,8 h Czas pracy belki naciskowej: 1 119,9 h Opis: W pełni zautomatyzowane rozwiązanie do gięcia – TruBend Cell 5000 została zaprojektowana z myślą o produkcji seryjnej wymagającej wysokiej precyzji. Zintegrowany robot umożliwia wydajne gięcie przy minimalnym udziale operatora. Stan: bardzo dobry, regularnie serwisowany Demontaż, załadunek i transport mogą zostać zorganizowane

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, CNC hydraulic press brake Nominal force: 200 tons (≈2000 kN) Maximum bending length: 5000 mm Application: Precise bending of steel and other sheet metal Key geometric parameters: Distance between uprights: ~4800 mm, throat depth: ~320 mm, max. opening height: approx. 480 mm Stroke (Y-axis): approx. 200 mm Movement and axes: Y1–Y2 axes: synchronized hydraulic/servo control X axis (backgauge): CNC-controlled, servomotor R axis: height adjustment (optional CNC) Cgjdpfx Ahjy It Rxsxst (optional): Z1–Z2 axes (lateral positioning of backgauge fingers) CNC control – typical models: Delem DA-53T / DA-58T / DA-66T, alternatives from Cybelec Functions: 2D/3D bending programming, automatic stroke and force calculation, stop position calculation, tool and material database Main technical components: Hydraulic system: synchronized cylinder pair Automatic crowning: compensation for deflection Tool clamping: AMADA-compatible quick release clamping Backgauge: CNC-controlled positioning Power and physical data: Main motor: approx. 13.5 kW Weight: approx. 19–20 tons Dimensions: approx. 6.1 × 1.9 × 2.9 m Technological capabilities (typical), carbon steel bending: approx. 6–8 mm (over a length of 5000 mm)

Stanje: rabljeno, številka stroja/vozila: LC596, Used Complete Still Wine Line - 5000 BPH Technical Specifications & Performance Data This used bottling line is configured for handling glass bottles and covers a comprehensive sequence from filtration to cartoning and palletizing. It is a pre-owned solution developed for industrial packaging and beverage production, integrating well-known European manufacturers. The configuration includes rinsing, filling, closing (flush corking and aluminum caps), capsule application (heat-shrink and polylaminate), pressure-sensitive labeling, and end-of-line packaging. Container Type: Glass bottles Core Monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (Rinser–Filler–Capper) Filtration: Seitz Orion plate filtration group Bottle Preparation: SICK Blancamat 8 bottle washer (pre-labeling) Capsule Application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate) Labeling: Cavagnino & Gatti CG E8-4-2NPS (3 stations: front/back/neck), Pago PAG.876 carton labeler Conveying/Accumulation: MBF accumulation table (conveyor belt) Case Handling (Options Set 1): Bortolin & Kemo FOC 23 30 case erector, MA 88/1 divider-inserter, IAM 2T AP case packer, MARA HM case sealer, PAC 2000 palletizer Case Handling (Options Set 2): Mas Pack MAS 1200 case erector (400 Vac, 2 kW), Mas Pack Minipack 21/4 case packer (400 Vac, 6 kW), Mas Pack Seal 1200 case sealer, Mas Pack Exacta R Astride divider-inserter Ancillary Equipment: PREO E0P051 4R2 hot melt units, Ber PDC 30 carton scale Selected Component Years: 2011 (Mas Pack MAS 1200, Seal 1200), 2015 (Mas Pack Minipack 21/4, Exacta R Astride), 2001 (Ber PDC 30) Certifications: CE markings on Mas Pack modules Advanced Automation & Control Systems The line integrates automated capsule application, multi-station pressure-sensitive labeling as well as end-of-line case forming, gluing, and packaging. Modules are equipped with integrated safety circuits and CE-compliant controls. Hot melt application is carried out by PREO melters for reliable case sealing. Fast adjustments at labeling stations and during changeover allow for efficient shifts within the glass bottle families. Codpfx Ahsyhbhqexegt - Multi-station pressure-sensitive labeling - Automated capsule application - Hot melt application via PREO E0P051 4R2 units - CE conformity of Mas Pack equipment - Operator-friendly HMI/controls at each packaging module Production Line Integration Designed for inline operation, the system integrates filtration, monoblock rinsing–filling–capping, labeling, and complete end-of-line packaging. The conveyor accumulation table supports buffer management for a consistent flow between wet and dry areas.

Stanje: dober (rabljeno), Leto izdelave: 2005, Used cutting machine Lectra Vector 5000 Fashion V3 – year 2005 – effective cutting width 180 cm – traversing – new inverter device – in good condition. Cedpfx Asrtnccohxsgt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2D1-1116, skupna višina: 1.905 mm, skupna širina: 1.626 mm, skupna dolžina: 1.219 mm, skupna masa: 725 kg, Prodam, kot nov malo rabljen , zelo precizen ( +- 0,001mm ) avtomatski stroj za honanje lukenj skupaj z veliko preciznimi instrumenti , merilnimi napravami in veliko dodatne opreme za honanje izvrtin od D6 do D25 mm . Priklopljen je na električno omrežje in pripravljen za zagon. Csdpfxjy E N R Ne Ahxegt

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 37.200 h, vpenjalna sila: 160 kN, delovna prostornina: 251 cm³, tlak vbrizgavanja: 2.500 letvica, skupna masa: 8.200 kg, premer polžastega transporterja: 40 mm, Dobavni pogoji: FCA Pegnitz Csdpfx Aswd Udlohxogt Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Kombinirana enota: Proizvajalec: GSG Podajalnik: Tip: 840.02-027 Drobilnik/lupilec: Tip: 663.02-017 Obseg žice: Ø5,5–16 mm Za valjano žico z natezno trdnostjo pribl. 40–60 daN/mm² Drobilni in upogibni valji: s karbidnimi vložki Nastavitev z reduktorskim motorjem 0,37 kW – 1,15 A Pogon krtače z reduktorskim motorjem 0,25 kW, n = 293 min⁻¹ Priključna napetost: 380–420 V, 50 Hz Enota za suho prevleko: tip: BSG/T Polnjenje: kalcijev stearat (npr. Traxit tip: D S 51 E) Poraba stearata: pribl. 350 g na tono žice Hitrost vlečenja: maks. 15 m/s Pogonska moč: 2 x 0,55 kW reduktorska motorja Kaseta: 2 reži (priloženo 1x valjčni blok + 1x kaseta) Tip: PKG/T (TS) Očiščena valjana žica Trdnost žice pribl. 40–60 daN/mm² Obseg žice: maks. vhodni premer 9,5 mm, končni premer 3,5–8,5 mm Dimenzije valjev: min. Ø115 mm, maks. Ø125 mm Premer izvrtine: Ø82 mm, širina 15–25 mm Premer hladilnega zatiča: 25 mm Cgsdpfx Ahsr Nfvmexet Poraba hladilne vode pribl. 600 l/h Vlečna stroj: Proizvajalec: Koch Tip: KHZ 5000 Leto izdelave: 1993 Serijska številka: 13.821 Število vlečnih postopkov: 1 vlečenje na blok Vlečni boben: Ø700 mm Vlečna sila: mehansko 5000 N Material žice: mehko jeklo Vhodna trdnost: pribl. 40–45 daN/mm² Maks. vlečni razpon: vhodni premer 5,0–8,5 mm Redukcija preseka: 20 x 25 % (mehanično) Vlečna hitrost: maks. 7,0 m/s Zavora: Twiflex, tip: MRB Pogon: asinhronski motor / frekvenčni pretvornik, Siemens PN=110 kW, n=1485 min⁻¹ Navijalec: Proizvajalec: Koch Tip: KHS 1250 Leto izdelave: 1993 Tovarniška št.: 13741 Premer žice: 5–8,5 mm Trdnost: pribl. 55–70 daN/mm² Hitrost navijanja: V = 7 m/s, prilagojeno vlečnemu stroju Teža polnjenja: pribl. 3000 kg Pogon navijalnega bobna: trofazni motor z zunanjim ventilatorjem Tip: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P = 37 kW, n = 1000–2000 min⁻¹, IP54, izvedba B3 Pogon za spiralno polaganje: 66-671U, 1,5 kW, 170 V, 9,8 A, 1680 min⁻¹, IP44, B5-200 S pritrjenim tahogeneratorjem TG 20, 20 V / 1000 min⁻¹ S pritrjenim čelnim zobnikom SK 32, i = 57,53, izvedba B6 Hidravlika: hidravlični agregat tip: H13 AK Pnevmatika: kolutna zavora Twiflex tip: MRB Pnevmatski cilinder tip: SPWG 28032-25 mm hod Dimenzije: 3100 × 3000 × 1700 mm (D × Š × V) brez uteži

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Prebijalna sila: 220 kN Debelina pločevine: 8 mm Delovno območje: 2535x1280 mm Debelina pločevine pri nerjavnem jeklu: 4-6 mm Dodatna oprema: - Pripravljalne kasete - Miza s kroglastimi valji Cgedpfx Aheyrcycexst - Obratovalne ure: 97.000

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: LC611, Used Tetra Pak UHT System 5000 LPH Technical Specifications & Performance Data This Tetra Pak UHT System Steritherm (model VTIS C-4) is a robust, pre-owned processing unit designed to deliver consistent ultra-high-temperature processing for beverage production and industrial packaging operations. Engineered for high reliability and seamless integration with downstream filling and packaging equipment, it offers stable thermal performance and sanitary operation for modern beverage processing lines. Manufacturer: Tetra Pak Model: VTIS C-4 Steritherm Year of Manufacture: 2017 Capacity: 5000 L/h Maximum Process Temperature (indicative): up to 148 °C (according to inspected pressure section) Included in scope of supply: - Alfa Laval SHL-20 homogenizer (250 bar) - Alfa Laval H7-RC plate heat exchanger (198 L) Codpjy Ef T Tefx Ahxegt - Pump station with Alfa Laval LKH-10 and LKH-107 pumps - ABB drive and CIP controller Design concept: Continuous UHT treatment with integrated homogenization and plate heat exchange Construction: Hygienic stainless-steel process components Advanced Automation & Control Systems The system features computer control for precise process management, ensuring stable time-temperature profiles and consistent product quality. Automated monitoring of key parameters helps reduce product losses and optimize energy consumption. Safety interlocks and measuring instruments ensure safe operation during heating, holding, and cooling phases. - Centralized computer control for process sequences and alarms - Integrated CIP controller for cleaning process optimization - Process instrumentation for pressure, temperature, and flow control - CE marking at the component level for included Alfa Laval equipment Integration in Production Lines Designed for seamless incorporation into a used filling line or new production layouts, this UHT system interfaces smoothly with upstream raw material handling as well as downstream filling and packaging equipment. Supports industrial packaging workflows for PET and glass bottling lines by delivering thermally processed product to fillers. - Inline compatibility with fillers, buffer tanks, and conveyors - Ideal for beverage production environments requiring continuous throughput of 5000 L/h - Flexible process connections for integration with existing pipelines and CIP loops - Suitable for upgrades to used installations or capacity expansions Machine Condition & Maintenance History This unit is offered as an operational, used UHT system. Accessory components show evidence of professional maintenance, including a recent maintenance label on the Alfa Laval pump (dated 04/24) and inspection records for pressure-loaded parts. Operational status: fully functional Inspection labels present on pressure sections

Stanje: dober (rabljeno), . Usable table dimensions: 5000x550 mm . Maximum grinding length: 5000 mm . Maximum transverse stroke: 600 mm . Z-axis travel: 600 mm Codpfx Ahoip Dxwsxogt . Grinding wheel dimensions: 420x127x100 mm . Manual tilting head for inclined surfaces . Coolant tank with paper filtration unit . Magnetic separator . Magnetic chuck with 3 hydraulic power packs, each 1000x500 mm . Machine length: 12,000 mm . Machine width: 2,500 mm . Machine height: 3,500 mm . Weight: 15,000 kg . Complete set of machine manuals . CE certification

Stanje: kot nova (razstavni stroj), ⭐ FRONIUS TPS 4000 ⭐ Fully Equipped Device Description / Scope of Delivery: Fronius TPS 4000 unit with full equipment – top specification! - Power source Pulse 400 Amps Csdsvlwh Dopfx Ahxjgt - FK 4000 FC cooling unit with optional filter, including flow control (==> if no water is circulating, the unit automatically shuts off to protect the torch hose assembly). - VR 4000 wire feeder with optional rollers underneath + extended interconnecting hose package + metal feed rollers – only premium components used. - Fronius AW5000 torch package with Job Master function on the torch (==> Display on the torch / adjustable amps, job selection, wire feed, and arc control directly on the torch) Photo = scope of delivery. All prices stated are starting prices. Pricing is tailored individually according to configuration requirements. Original price approx. €15,000 (net), offered at 1/3 of the new price. Not comparable to Transsteel scrap. Why buy from us and not somebody else? - We are professionals when it comes to this series of Fronius welding equipment. We always have around 60-80 units in stock. Only these Fronius models – no other brands! - We don’t just pass devices through – all units are dismantled, checked, wear parts replaced, and only once everything works flawlessly do we sell the equipment. - All our devices come with the popular Fronius torches. NO €100 "E*b*a*y" torch, but REAL QUALITY! Fronius torches cost between €650 and €900 net, depending on the configuration! - All our units are clean and have no burn marks on the displays or numerous burn holes / dents on the casing! You get from us an item that is presentable and not completely worn out! - As our customer, you benefit from affordable spare parts and support if needed. - You receive a proper invoice with VAT disclosed. All units can be viewed, paid for, and collected by appointment at our main warehouse in Vienna! Insured palletized shipping is, of course, possible! All prices are starting prices – you can customize your equipment with us. Robot device or manual unit. Long or short interconnecting hose package. Various hose packages available. Synchropulse. 270, 400, or 500 Amp units in stock. CMT version available as manual or robot model. It’s best to call us so we can discuss your application and provide you with an initial price estimate.

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), številka stroja/vozila: 080700467, Counter (millions): 0.84 Format (mm): min. 120 x 148 (optionally 105 x 148) // max. up to 350 x 500 Paper weight: 40 - 300 g/m² Equipment / further details: Hohner stitching heads Includes: Cgedpfx Ahjhbu Tujxet - Slitter Cutter Creaser - Inline Bookletmaker DBM 5000 - Auto Spine Master - DBM-500T

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Leto: 2017 - tehnično učinkovit, pripravljen za delo – po popolnem servisu - deljene glave - pnevmatski pogon - največja višina profila: 160 mm - odporna enota spuščena pod mizo Cedjy Naz Tspfx Ahxsgt - hidravlična blokada za vračanje odporne enote

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 1.356 h, nosilnost: 4.500 kg, dvižna višina: 5.000 mm, težišče tovora: 600 mm, vrsta goriva: plin, tip droga: dupleks, gradbena višina: 3.500 mm, vrsta prenosa: hidrostat, širina nosilnega okvirja vilic: 1.250 mm, dolžina vilic: 1.250 mm, širina vilic: 150 mm, debelina vilic: 50 mm, stanje pnevmatik: 100 odstotek, Tip prednje pnevmatike: polne pnevmatike (črne), velikost sprednje pnevmatike: 200X50-10, tip zadnje pnevmatike: polne pnevmatike (črne), velikost zadnje pnevmatike: 250-15, skupna masa: 11.440 kg, lastna masa: 6.940 kg, skupna višina: 2.600 mm, skupna dolžina: 2.500 mm, skupna širina: 2.250 mm, barva: oranžna, Oprema: CE označba, bočni pomik, kabina, osvetlitev, pogon na vsa štiri kolesa, vilice za palete, HUBTEX DQ45G – 2017 | 1365 MTH | LPG | DUPLEX 5000 mm | FORK POSITIONER Ready for work from day one – no investment, no risk ✅ Why this forklift? Looking for a machine that won’t interrupt your operations? ⚙️ This HUBTEX DQ45G is fully serviced and ready to work immediately – no hidden costs. ✔️ comprehensive maintenance (oils, filters, complete inspection) ✔️ condition: as new Cedpfxoy Ncpgo Ahxjgt ✔️ only 1365 operating hours ✔️ new superelastic tyres – no additional investment required Key specifications: 🔹 Capacity: 4500 kg 🔹 Drive: LPG 🔹 Mast: Duplex – 5000 mm 🔹 Fork positioner: 1250 mm 🔹 Fork length: 1250 mm 🔹 Cabin: full, heated Technical data: 🔹 Year: 2017 🔹 Hours: 1365 MTH 🔹 Weight: 6940 kg 🔹 Load center: 600 mm Mast & Lifting 🔹 Duplex mast 🔹 Lift height: 5000 mm Dimensions 🔹 Height: 2600 mm 🔹 Length: 2500 mm 🔹 Width: 2250 mm Chassis 🔹 New superelastic tyres (100%) Equipment 🔹 Heated full cabin 🔹 Fork positioner 🔹 Complete lighting package Condition ✔️ Technical: 5/5 ✔️ Visual: as new Perfect for: 🏭 narrow aisles 🌲 timber / steel industry 📦 long load handling 🌍 indoor & outdoor use What you get ✔️ fully inspected and tested forklift ✔️ ready for immediate use ✔️ online presentation available ✔️ delivery to your premises Delivery & Service 🚛 Europe-wide delivery 📦 complete logistics support 💼 leasing solutions 🔧 after-sales support Why FT LOGISTICS? ✔️ 100+ machines available from stock ✔️ in-house service team ✔️ experience across Europe ✔️ trusted by a wide range of clients

Leto izdelave: 2022, obratovalne ure: 100 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, pomik osi Y: 269 mm, številka stroja/vozila: 1111127689, Oprema: drsna vrata, Hello, the machine is in perfect condition. For more information, please contact me via email. Cutting Capacity (max) Magnutom 400 ø151 mm / 5.9" 151 x 403 mm / 5.9 x 15.9" 92 x 550 mm / 3.6 x 21.7" PHYSICAL SPECIFICATIONS Cutting Motor Rated cutting power (S1): 11 kW / 14.7 HP Peak cutting power (S3): 16 kW / 21.5 HP Cut-off Wheel for Magnutom 400 Diameter x Thickness x Bore: 432 x 3.0 x 32 mm / 17 x 0.12 x 1.26" Rotational speed (at rated load): 1000-1950 rpm Cgjdpfxeyfrucs Ahxst Cut-off Wheel for Magnutom 500 Diameter x Thickness x Bore: 508 x 3.5 x 32 mm / 20 x 0.13 x 1.26" Rotational speed (at rated load): 1000-1850 rpm Positioning & Feed Positioning range (cut-off wheel): Y= 385 mm / 15.16", Z= 235 mm / 9.25" Maximum sample height under cut-off wheel: unlimited Maximum positioning speed: Y= 70 mm/sec / 2.75"/s, Z= 50 mm/sec / 1.97"/s Feed speed range: 0.1 – 10 mm/s / 0.002 – 0.2"/s (adjustable in 0.1 mm/s / 0.002"/s steps) Cutting force: 0-1400 N / 10-315 lbf Cutting Table Fixed cutting table, Magnutom-400/-500: Width x Depth 827 x 781 mm / 32.56 x 30.75" X-table (option): Width x Depth (max) 942 x 781 mm / 37.10 x 30.75" Width x Depth (min) 673 x 781 mm / 26.50 x 30.75" X-table travel: 269 mm / 10.6" T-slots, bi-directional: 12 mm / 0.48" Dimensions and Weight Width: 1758 mm / 5' 9" Depth: 1463 mm / 4' 9" Height: 1882 mm / 6' 2" Weight: 2400 kg / 5291 lbs Cutting Chamber Width: 1000 mm / 3' 3" Depth: 1206 mm / 3' 11" Height: 918 mm / 3' 0" Ambient Temperature: 5 - 40°C / 41 - 104°F Relative Humidity: 0 - 95% RH, non-condensing

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 5.800 kg, skupna dolžina: 5.000 mm, skupna širina: 1.250 mm, skupna višina: 650 mm, Leto izdelave: 2025, dolžina vilic: 5.000 mm, nosilnost: 5.000 kg, Transport dolly 1250 x 5000 mm with payload capacity of 5000 kg Tyres: Solid rubber bandage wheels Steering: Turntable with fork tine receptacle Optional side stanchions Cgedev Hnnkopfx Ahxot Support legs at the front for parking the dolly