Tbt Tiefbohrtechnik Gmbh + Co Bw200-1-800 nakup rabljenega (114.936)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106341-11, Leto izdelave: 2005, skupna masa: 8.000 kg, skupna višina: 2.700 mm, skupna dolžina: 5.660 mm, skupna širina: 3.956 mm, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling unit information: - Number of spindles: 1 - Continuously variable spindle speed: 300 - 8000 rpm - Spindle drive power: 7.5 kW - Maximum drilling depth: 800 mm - Minimum/maximum drilling diameter: 3 - 25 mm (based on ST 60) - Maximum spiral drilling: 25 mm - Maximum tapping: M24x3 - Milling material removal rate: 150 cc/min Travel distances: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Coolant system information: - Deep-hole drilling oil as coolant - Tank capacity: 800 litres - 1x scraper belt swarf conveyor - 1x hydraulic power unit and pneumatic system/equipment - 1x submersible pump: Pump capacity: 200 l/min - 1x low-pressure pump: Pump capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min For use with: steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 94 l/min Pump drive: 7.5 kW Spindle unit: - Cartridge-type spindle with drive housing and gear-driven spindle drive. Spindle bearings are precision angular contact ball bearings with lifetime grease lubrication. Milling and drilling spindle unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill bush carrier: - Version as a 2-position turret with electric swivel mechanism - Positioning via Hirth coupling - Turret head equipped for: - Tool guides for deep hole drilling - Milling and drilling spindle unit for conventional machining Ndsdpfow E H E Rox Am Hja Pickup tool changer: - For conventional tools and drill bushes - Disc-type magazine with 20 positions including pick-up stroke Automatic tool changer for deep hole drilling tools: - Fixed ELB column magazine for at least 5 tools, including automatic tool clamping for HSK holders Clamping table with W-axis and NC rotary table: - Length/width: 800x600 mm - Positioning accuracy: B-axis +/- 30 seconds - Load capacity (centrally): 1500 daN Workpiece clamping device: - 1x tailstock with manually operated clamping - 1x NC dividing head (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushes + support prisms Electrical equipment information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106546-11, skupna višina: 3.550 mm, skupna dolžina: 7.185 mm, skupna širina: 4.720 mm, skupna masa: 8.000 kg, The drilling method of the deep hole drilling machine is single-lip (gun drilling). Drilling Unit Information: - Number of spindles: 1 - Spindle speed, steplessly adjustable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Maximum drilling depth: 1,000 mm (in one pass, without retraction) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter with indexable inserts: 40 mm Ndsdpoxdm Awjfx Am Hea - Maximum thread tapping: M27 - Milling material removal rate: 250 ccm/min Travel Axes: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steady rests) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 1,200 liters - 1x hinge belt chip conveyor - 1x screw conveyor system - 1x hydraulic unit and pneumatic unit/equipment - 1x central lubrication - 1x submersible pump: Pump delivery rate: 200 l/min - 1x low-pressure pump: Pump delivery rate: 100 l/min Pump drive: 2.2 kW - 1x compact belt filter: Filtration rate: 175 l/min For machining steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x air cooler (heat exchanger) 22.5 kW - 1x oil mist extraction system, Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with SK 40 tool holder Tool Change Magazine consists of: - Tool magazine with intermediate gripper - SK 40 tool holders - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Tool storage positions: 80 - 2x swivelling tool steadies for guiding and supporting long drilling tools, with automatic return to home position. Clamping table with B axis and NC rotary table: - Length/width: 800x600 mm - B axis: 360° - Positioning accuracy B axis: +/- 30" - Table travel: 800 mm - Payload (centrical): 1,500 daN Electrical Equipment: - 1x CNC control, Heidenhain iTNC 530 - 1x drilling process monitoring - 1x RENISHAW probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106882-11, skupna dolžina: 4.400 mm, skupna širina: 1.700 mm, skupna višina: 2.700 mm, skupna masa: 7.000 kg, The drilling method of the deep hole drilling machine is the single-lip drilling process. Drilling unit information: Njdjwh Rp Ejpfx Am Hsda - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle center distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Spindle speed, stepless: 1,000 – 20,000 rpm - Feed rate, stepless: 10 – 25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid information: - Coolant supply: deep-hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drilling oil supply - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction - 1x scraper belt chip conveyor - 1x hydraulic and pneumatic power unit/system - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled stepless speed adjustment - Spindle head with connection for tool holder - 2 x tool holder for setting sleeves to VDI 3208 SE10x60, screwed onto the spindle head of the motor spindle Guide bush carrier: - The guide bush carrier is referenced via the NC axis - Cast design, mounted on linear guides - Drive for W-axis using AC servo motor and ball screw with indirect, absolute position measuring system Workpiece carriage: - The workpiece carriage is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting fixture plates or special clamping devices - Base body in cast design with linear roller guides - Drive for X and Y axes by AC servo motors and ball screws - Direct, absolute position measuring systems. Clamping/radial slot on table plate Clamping table with NC rotary table for positioning: - With rotary and swivel axes - Hydraulic clamping on both rotary and swivel axes Technical data: - Swivel range: 270° - Rotary range: 360° - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Machine auxiliary equipment: - 2 x holder for spring-loaded guide bush, arranged on the guide bush carrier - For max. drilling diameter Ø 18 mm

Stanje: rabljeno, Leto izdelave: 1974, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8002/6410, globina vrtanja: 1.000 mm, premer vrtanja: 30 mm, vrsta vhodnega toka: trifazni, moč vretenovega motorja: 21 W, dolžina mize: 1.000 mm, vhodna napetost: 550 V, montažni premer: 160 mm, število vreten: 1, zmogljivost vrtanja: 1.000 mm, premer tulec: 30 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Globinska vrtalna stroj za vrtine do 1000 mm globine in premera 30 mm, uporablja se za vrtanje aluminija, redno servisirana, vključuje veliko količino vrtalnih svedrov. Stroj je popolnoma delujoč in stalno v uporabi. Krmiljenje Siemens, Simatic PANEL, na voljo je dokumentacija. Nedpfx Asx Ehg Tem Hsda

Stanje: zelo dobro (rabljeno), Postaje/oprema: Odvijalnik Navijalnik Odsesovalni sistem z drobilnikom (4x Lundberg Tip WT200-200U – l. 2018) Inertna ohišja Enota za laminacijo zbiralne letve Rezalne enote Laminirne enote / enote za nanašanje lepila Nodpjxzufhofx Am Hjda Ogrevani valji Centralni računalnik Krmilne omare Pogonski motorji Portalni žerjav Corona obdelava

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: System-S/N: H 01 07 000-1 / Motor-S/N: 0141708310002, skupna masa: 1.200 kg, The Pregler hydraulic power unit is a reliable and high-performance solution for supplying hydraulic systems in various industrial applications. It combines high-quality components in a robust housing to ensure stable pressure supply and efficient operation. The unit offers flexible application possibilities and can be easily integrated into existing systems, providing a long service life thanks to its durable construction. Njdpfx Amowtgwie Hoda

Leto izdelave: 2008, stanje: dober (rabljeno), Machine type: Finishing machine Manufacturer: Supfina Grieshaber GmbH & Co. KG Model: 622/1 Serial number: 760001 Year of manufacture: 2008 Ndedpfxjlrt Saj Am Hoa Available immediately Ex location, for self-dismantling Dismantling and loading services available on request

Stanje: rabljeno, Leto izdelave: 2006, Stiskalni stroj Proizvajalec: Schuler Pressen GmbH & Co. KG, Göppingen, Nemčija Tip: SAL 250-1.9 Mark II Serijska številka: A/260156 (št. stroja 2006-260156) Leto izdelave: 2006 Stiskalna sila: 2.500 kN (250 ton) Število hodov: 80–400 hodov/min Ndedpfx Aszil S Ijm Hea Pogon: 51 kW pri 2.000 min⁻¹ Hod batnice: 30 mm Nastavitev batnice: 100 mm Dvig batnice: 75 mm Vgradna višina (od mizne plošče do batnice, spodnji položaj batnice, zgornja nastavitev): 550 mm Dimenzije mizne plošče: 1.950 x 1.060 mm (po skici) Površina batnice: 1.950 x 800 mm (po skici) Stisnjen zrak: 5,5 bar Skupna masa (brez podajalnika): 48.000 kg Krmilni sistem: SYS PACO 8000 Zvočno izolacijsko ohišje (oranžno) Enota za podajanje traku Proizvajalec: Kohler Maschinenbau GmbH, Friesenheim, Nemčija Tip: KRS 18.260/19-2000.2H-BF1 Serijska številka: 40 871 Leto izdelave: 2006 Priključna moč: 15,5 kW Napajalna napetost: 400 V, 50 Hz Razvijalec Proizvajalec: Kohler Maschinenbau GmbH, Friesenheim, Nemčija Model: 18 260-1000.2 Serijska številka: 40 466 Leto izdelave: 1984 Priključna moč: 8 kW Napajalna napetost: 380 V, 50 Hz

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: nepreverjeno, Ta sklop je sestavljen iz dveh povezanih delov in je bil uporabljen kot varilna celica za varjenje vijakov. Del 1 Ndjdjzvylpspfx Am Hsa Varilna celica R+P za varjenje vijakov zaprt varnostni prostor iz aluminijastih profilov varnostni pokrov z varnostnimi vrati signalna luč integrirana krmilna omarica dokumentacija je na voljo primerno za avtomatizirane procese varjenja vijakov Del 2 Varilni stroj Nelson za varjenje vijakov Proizvajalec: Nelson Stud Welding Tip: SD-FSE 1000S Letnik: 2017 Serijska številka: 1739289 Številka dela: 80-07-57 Tehnični podatki: Napajalna napetost: 24 V DC / 90 V DC Vhodni tok: 1 A / 10 A Varilni tok: do 2000 A (ED 2 %) Stopnja zaščite: IP20 Polariteta: STD Obseg dobave: Varilna pištola Priključni kabel Mobilna omarica za napravo Obe deli sta bili nazadnje skupaj uporabljeni kot avtomatska varilna naprava za varjenje vijakov.

Stanje: rabljeno, Maksimalna sila stiskanja: 3.150 kN Število hodov na minuto: 15–80 Ndedpfx Amezwf Tne Hea Nastavljiva višina bata: 10 mm Hod: 200 mm Napetost: 400 V Moč motorja: 30 kW Priključna moč (skupna moč): 65 kW Teža: pribl. 17.000 kg Varnostna razdalja za delo z obema rokama: 198 ms

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10044/0218, !!! Podrobne fotografije in specifikacije stroja TLI 10 najdete v datoteki PDF, ki je priložena. !!! !!! TLI 10 je namenjen obdelavi notranjih in stranskih površin prstanov. !!! Za obdelavo zunanjih površin je potrebno kupiti stojalo TL0 10, ki ga ne ponujamo. Stroji so posebej zasnovani za obdelavo zaročnih prstanov in zapestnic. Ločitev obdelave notranjih (TLI 10) in zunanjih površin (TL0 10) na dva stroja zagotavlja visoko produktivnost. Vse potrebne strojne operacije (ravna obdelava, obdelava robov, stranska obdelava in faziranje) je mogoče izvajati zaporedno, brez potrebe po prilagoditvah ali predelavah strojev. Tehnični parametri: TLI 10 Parameter Vrednost Pogonska moč 0,55 kW z električno zavoro Napetost 380 V / 50 Hz Regulacija hitrosti potenciometer Območje hitrosti 0–1400 vrt/min Nedpey S Sz Refx Am Hoda Dimenzije 100 × 70 × 130 cm Masa 170–190 kg

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NS-009-50Hz-11kN-300, vrsta vhodnega toka: Klimatska naprava, nazivna moč pri 50-odstotnem delovnem ciklu: 160 kVA, globina grla: 300 mm, tok kratkega stika: 25.000 A, vhodna napetost: 400 V, vrsta hlajenja: voda, skupna širina: 1.000 mm, skupna dolžina: 1.000 mm, skupna višina: 1.850 mm, skupna masa: 1.000 kg, napetost odprtega kroga: 15 V, Zens multifunkcijska strojna varilna naprava s točkovnim varjenjem 160 kVA – 50 Hz – 11 kN – leto izdelave 2022 Za prodajo je na voljo Zensova multifunkcijska strojna varilna naprava s točkovnim varjenjem, zasnovana za robustno industrijsko uporabo. Naprava je izvedena kot 50-Hz izmenična naprava in je primerna za različne naloge točkovnega varjenja. Naprava ima vgrajeno funkcijo prilagajanja valjčnega varjenja. Ustrezne glave za valjno varjenje niso del ponudbe stroja in jih je mogoče kupiti ločeno. Zaradi modularne zasnove naprave je mogoče uporabljati različna varilna orodja in izvajati različne aplikacije. Tehnični podatki Proizvajalec: Zens Model: NS-009 Označba stroja: Multifunkcijska strojna varilna naprava s točkovnim varjenjem Leto izdelave: 2022 Varilna tehnika: izmenični tok (AC), 50 Hz Varilna moč: 160 kVA Delovni cikel: 50 % Maks. varilna sila: 11 kN Varilni nadzor: SER Nadzorna enota PLC: Siemens CE-varnost: nadzor z dvema rokama Prilagajanje valjčnega varjenja: vgrajeno Oprema Njdpfeztn Sxox Am Hsda Zensova multifunkcijska strojna varilna naprava s točkovnim varjenjem 50-Hz izmenična varilna tehnika Vgrajena funkcija prilagajanja valjčnega varjenja Varilni nadzor SER Nadzorna enota PLC Siemens Nosilni sistem naprave s zaslonom na dotik Nadzor z dvema rokama kot CE-varnostna naprava Modularna zasnova stroja Robustna industrijska izvedba Na voljo ločeno Glave za valjno varjenje niso vključene v prodajno ceno stroja in jih je mogoče kupiti ločeno. Hladilna enota za vodo „On Top“ prav tako ni vključena v prodajno ceno stroja in jo je mogoče kupiti ločeno. Stroj je v dobro ohranjenem stanju in ga je mogoče po predhodnem dogovoru ogledati in preizkusiti. Opomba: Glave za valjno varjenje in hladilna enota za vodo „On Top“ so na voljo ločeno in niso del ponudbe stroja. Pridržujemo si pravico do tehničnih sprememb in napak.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Analytik Jena GmbH+Co. KG TOC/TNb analizator, multi N C 3100 Nsdpfjzh Irujx Am Hsda Model: multiNC3100 Stanje: Rabljeno Tehnični podatki: 230V AC 50/60Hz 1000VA Splošno: Obratovalna temperatura: +10 do +35 °C (priporočljivo klimatiziranje) Maksimalna zračna vlaga: 90 % pri 30 °C Zračni tlak: 0,7–1,06 bara Temperatura shranjevanja: +5 do +55 °C Zračna vlaga pri shranjevanju: 10–30 % (uporabiti sušilo) Maksimalna obratovalna višina: 2000 m Dodatki: Dokumentacija Napajalni kabel IEC Programska oprema

Stanje: dober (rabljeno), Leto izdelave: 1999, ESTA Spänesog-SB 8151, sesalnik za žagovino Visoko zmogljiv industrijski sistem za odsesavanje, proizvajalec ESTA, model Spänesog-SB 8151. Ta sistem je idealen za delavnice za odsesavanje žagovine in prahu (npr. pri obdelavi kovin ali lesa). Tehnični podatki naprave Nedpfxsznibwo Am Hjda Proizvajalec: ESTA Apparatebau GmbH & Co. KG Model/tip: Spänesog-SB 8151 Napetost (V): 400 V Moč (kW): 2,2 kW Intenzivnost toka (A): 4,6 A Frekvenca (Hz): 50 Hz Stopnja zaščite: IP 54 (zaščiteno pred prahom in brizganjem vode) Dodatne izdelke – nove in rabljene – najdete v naši spletni trgovini! Stroški mednarodne dostave na zahtevo.

Stanje: dober (rabljeno), Indumat THO 310, vozilo za avtonomni transport Robustno, industrijsko vozilo za avtonomni transport (VAT) iz preizkušene serije sistemov INDUMAT in E&K Automation. Vozilo združuje izjemno trpežno in dolgo obstojno mehaniko Indumata s prilagodljivo tehnologijo upravljanja serije TELETRAK MULTI. Naprava je idealna za uporabo kot nosilec rezervnih delov, za projekte nadgradnje, za avtomatizacijo lastnih procesov v hali ali za razširitev obstoječih sistemov. Tehnični podatki (glede na oznako na napravi): Proizvajalec (mehanika): INDUMAT GmbH & Co. KG (Reutlingen) Sistem za upravljanje / znamka: E&K Automation TELETRAK MULTI Model / tip: THO 310 Serijska številka: 9930 92 26844 Leto izdelave: 03 / 1993 Nosilnost: 1000 kg Lastna teža (brez baterije): 2720 kg Nazivna napetost baterije: 48 V Oprema in komponente: Vozila so bila kasneje nadgrajena z modernimi upravljalnimi elementi z zaslonom na dotik in so v dobrem, čistem stanju. Ta vozila so sestavljena iz izjemno dragocenih, zaželenih industrijskih komponent v kakovosti originalne opreme. Profesionalni varnostni laserski skenerji: vrhunski senzorji za zaznavanje oseb in ovir. Pripomoček za dvig tovorov: integriran, pogonjen valjčni transporter s tremi vodilnimi valji za samodejno, osrednjeno prevzemanje in predajo specifičnih nosilcev tovorov (npr. palet ali posebnih okvirjev). Upravljanje in HMI: stransko nameščena upravljalna plošča z zaslonom, ključem, funkcijskimi gumbi, kontrolnimi lučmi in priključkom za žični ročni upravljalnik. Varnostne naprave: lahko dostopen gumb za izredno ustavitev; priprave (izrezi) na odbijaču za optične skenerje za zaščito oseb (npr. laserski skenerji SICK) ali mehanske varnostne letve. Električna omarica: prostorna, lahko dostopna elektronska omara v zgornjem delu ohišja, dostopna preko zaklenljivih dvojnih vrat, za centralno upravljanje. „Vse na enem mestu: z veseljem vam ponudimo ustrezno financiranje prek banke za vaš projekt.“ komplett-konzept.leasingo.de Nodpfx Aezkqdxjm Hjda Dodatne izdelke – nove in rabljene – najdete v naši trgovini! Mednarodne stroške pošiljanja dobite na zahtevo!

Stanje: dober (rabljeno), WAGNER UGH-Z1-Q 1000 – avtonomni vodilni sistem Za prodajo so na voljo avtonomna transportna vozila (ATV/AGV) vrhunskega proizvajalca ek robotics (prej ek automation) na robustnih podvozijih WAGNER. Vozila so neposredno iz tovarne Mercedes-Benz, kjer so bila uporabljena za natančen in avtomatiziran transport materiala. Zaradi uporabe v avtomobilski industriji so bila ta vozila redno vzdrževana po najvišjih standardih kakovosti in varnosti. Pozneje so bila vozila nadgrajena z modernimi krmilniki z zaslonom na dotik in so v dobrem, čistem stanju. Ta vozila so sestavljena iz izjemno dragocenih in zaželenih industrijskih komponent v kakovosti originalnega proizvajalca. Profesionalni varnostni laserski skenerji: vrhunski senzorji za zaznavanje oseb in ovir. Idealna priložnost za logistična podjetja kot visokokakovosten vir rezervnih delov za obstoječe sisteme, za trgovce z rezervnimi deli ali za ambiciozne projekte avtomatizacije. Ndjdpfxjzklkte Am Hja Tehnični podatki Proizvajalec podvozja: WAGNER Fördertechnik GmbH & Co KG Model/tip: WAGNER UGH-Z1-Q 1000 Nazivna nosilnost: 1.000 kg Skupna teža (vključno z baterijo): 2.980 kg Napetost sistema: 48 V »Vse na enem mestu: z veseljem vam ponujamo ustrezno bančno financiranje za vaš projekt.« komplett-konzept.leasingo.de Dodatne izdelke – nove in rabljene – najdete v naši spletni trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: dober (rabljeno), Leto izdelave: 2019, Mössner Rekord SSF 801 tračna žaga Najzmogljivejša tračna žaga Mössner – uporablja se povsod tam, kjer so zahtevane najvišje zmogljivosti. Absolutna zastavonoša med navpičnimi visoko zmogljivimi tračnimi žagami. Ta stroj zagotavlja maksimalno natančnost, izjemno miren tek in brezkompromisno dolgo življenjsko dobo pri neprekinjeni industrijski uporabi. Osnovna oprema tračne žage: - Nosilec tračne žage iz stabilne sive litine Ndsdpezc Uvwefx Am Hja - Hitrosti rezanja nastavljive preko frekvenčnega pretvornika in trifaznega motorja s potenciometrom - 2-stopenjski menjalnik ali brezstopenjsko nastavljive hitrosti rezanja s prirobnico in frekvenčnim pretvornikom - Ročni napenjalni mehanizem z hidravličnim prikazom - Nagibna delovna miza – desno do 30°, levo do 15° - Izmenljiva aluminijasta kolesa z oblogo iz trde gume - Zgornje kolo nastavljivo - Varnostno stikalo na vratih kolutov - Barva: RAL 7035 svetlo siva, vrata RAL 5005 signalno modra Tehnični podatki: Proizvajalec: Mössner (August Mössner GmbH + Co. KG) Model: Rekord SSF 801 Premer koles: 800 mm Najv. širina reza (izteg): 785 mm Najv. višina reza: 670 mm (opcijsko razširljivo do 800 mm) Velikost mize: 960 × 1000 mm Najv. obremenitev mize: 750 kg Moč motorja: 11 kW Hitrost rezanja z menjalnikom: 26 – 180 m/min in 290 – 2000 m/min Hitrost rezanja s prirobnico: 500 – 2000 m/min Teža stroja pribl.: 2.300 kg Dimenzije (D x Š x V): 2240 x 1080 x 2900 mm Leto izdelave: 2019 Nova cena: 54.000,- € "Vse iz ene roke: z veseljem vam ponudimo tudi ustrezno bančno financiranje za vaš projekt." komplett-konzept.leasingo.de Oglejte si še ostale izdelke – nove in rabljene – v naši spletni trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 10.000 mm, notranja višina: 5.000 mm, filtrirna površina: 250 m², volumenski pretok: 16 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. Ndjdpfxju Ey Dls Am Hsa 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Leto izdelave: 2026, Shot blasting booth components: flat conveyor floor, cross screw conveyor, bucket elevator, air separator, screen, abrasive bunker, blasting machine, filter unit, fan, air ducts, lamella extraction wall, blast feed box, electrical control system supplied as a kit without installation. Alternatively, the system components can also be installed on your premises by our professional technicians. Nsdpfx Ashc T Nlom Hoda

Leto izdelave: 2023, stanje: novo, - modern ergonomic design - manual testing sequence with analog dial gauge (reading accuracy 0.2 HR units) - easy operation and fast testing procedure - test chamber height approx. 185 mm - test chamber depth approx. 160 mm - dimensions 545x182x755 mm Nsdpfjpbbc Hex Am Hjda Test load ranges: 60 / 100 / 150 kg Test methods: HRA/HRB/HRC Standard scope of delivery: - hardness tester - prism support - flat test table Ø150 mm - flat test table Ø50 mm - 1/16" ball holder with ball - 120° Rockwell diamond indenter - spindle guard - accessory case

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. Njdpfondk N Aox Am Hjda With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. POTENTIAL APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, številka stroja/vozila: 1018, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: ročni, vrsta aktuacije: električni, Premer cevi (maks.): 50 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, trajanje garancije: 24 meseci, Oprema: CE označba, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) Ndodpfx Amenfvy Uj Hoa • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 15.000 mm, notranja višina: 5.000 mm, filtrirna površina: 352 m², volumenski pretok: 22 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Ndodju Hy Tpspfx Am Hsa Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Leto izdelave: 2026, Peskalni voziček 10t za peskalno napravo s pnevmatskim pogonom. - Pnevmatski pogon za obremenitev 10 t - Obremenitev: 10 t - Dimenzije: D=2000mm Š=2000mm V=500mm - Za tirni sistem Ndodpfx Ajyyxfrjm Hea - S sprejemnimi površinami za vpenjanje obdelovancev - Rotacijska miza kot opcija

Stanje: novo, Leto izdelave: 2025, Pressure blast cabinet DSK 20.10.09 with trolley and rotary table. Ndsdpfxsfnh Rvj Am Hja Width: 2050mm Depth: 935mm Height: 955mm Pneumatic lifting door with the advantage that the blasting media falls back into the cabinet when the door is opened, instead of onto the floor. If you have any questions about technical specifications, please contact us in writing or by phone. Our machines have been manufactured at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing known contacts.