Tbt Bw 250 S nakup rabljenega (88.213)

Stanje: dober (rabljeno), globina vrtanja: 1.500 mm, dolžina podajanja os X: 2.000 mm, dolžina pomika po osi Y: 1.300 mm, dolžina podajanja os Z: 1.500 mm, Manufacturer: TBT Tiefbohrtechnik Model: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, milling, and tapping machine for heat exchanger bases and plates Swiveling A-axis: +25° to -15° Filtration and coolant system: 1,000 L Chip conveyor: 2,000 x 1,200 mm – output height Milling tool changer, tower station, 20 positions ELB drilling capacity: 3 – 35 mm Milling capacity: 250 cc/min Feed rates on all axes (X-Y-W-Z): 15,000 mm/min Approx. 15,000 spindle hours Comes with a large tooling package Specifications Metric / US Standard Max. drill diameter (steel): 40 mm Kdodev A Uw Depfx Al Njk Drilling depth: 1,500 mm X-axis travel: 2,000 mm Y-axis travel: 1,300 mm Z-axis travel: 1,500 mm W-axis travel: 750 mm Table load capacity: 15,000 kg Table dimensions (L x W or Ø): 1,600 x 1,200 mm Spindle taper: HSK 63 Mk Spindle power: 11 kW Spindle speed: 8,000 rpm Dimensions (approx.): Length: 7,200 mm Width: 7,800 mm Height: 4,250 mm Weight: 23,000 kg Please note: The information on this page has been provided by us and, where possible, obtained from the manufacturer to the best of our knowledge. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all critical details.

Stanje: rabljeno, Leto izdelave: 1996, Core drilling diameter – max. 25 mm Drilling depth 1000 mm Swing diameter mm Total power requirement 25 kW Machine weight approx. 12.5 t Space requirements approx. m T B T Kjdpfjt Hw Ayox Al Njdk CNC-controlled horizontal deep hole drilling machine Type BWP 250 Year of manufacture 1996, mechanically and electrically overhauled in 2006 _____ Working area: X-axis = Drilling carriage column approx. 2,000 mm Z-axis = Drilling carriage stroke approx. 1,200 mm Drilling depth with 2 steady rests approx. 1,000 mm Y-axis = Drilling carriage vertical stroke approx. 1,100 mm Table clamping area: 1,200 x 2,000 mm Drilling capacity - Ø solid material approx. 4 – 25 mm Tool holder HSK 50 Spindle speeds: 1,260 – 15,000 rpm Feed rates/rapid traverses for Z/X/Y axes Infinitely variable: 100 – 10,000/15,000 mm/min Feed drive power: 27 Nm / 1000 daN Spindle drive power: 7 kW Total drive approx. 30 kW – 400 V – 50 Hz Weight approx. 10,000 kg Accessories / Special features: – Ideal machine for complete machining of larger workpieces, die forms, plates, etc. using deep hole drilling Ø 25 x 1,000 deep, milling up to Ø 65, slot milling up to Ø 30, spiral drilling/boring up to Ø 30, countersinking and thread cutting up to M 24 x 3. – SIEMENS 840 D 4-axis CNC path control with process monitoring, etc. – High-frequency drilling spindle by GAMFIOR with infinitely variable spindle speeds. – Pneumatically actuated (200 mm) drill bush holder, swivels in 2 positions. – Stationary 12-position tool changer by MIKSCH, type CTM 40 with 800 mm stroke for holding twist drills, milling cutters, and tap tools; switching between ELB deep hole drills and standard tools is manual. – Table is stationary for high workpiece weights and accurate drilling. – On the table: FIBRO CNC rotary indexing table type RTN 400 = 420x420 as B axis – For mounting on the table: hydraulic FIBRO rotary indexing table, Ø 1,000 mm, indexing 3 – 144 or angle settings 2.5 – 120° – Large coolant system, approx. 11 kW pump with scraper conveyor and various filters – 2 steady rests for supporting deep hole drill shafts – Complete work area enclosure with lateral and frontal access Condition: very good – a truly rare opportunity, will soon be available for demonstration under power Delivery: ex-stock here Payment: strictly net – upon receipt of invoice We look forward to your order. For further questions, we are at your disposal.

Leto izdelave: 2013, stanje: skoraj kot novo (rabljeno), Brand: BDPLAST Year of manufacture: 2013. Suitable for extruders with screw diameters from 90 to 150 mm. Universally applicable, as new, only approx. 500 operating hours. Design: Plate screen changer Screen diameter: 250 mm Filtration area: 491 cm² Sealing ring: PTFE / Teflon Kdsdpfx Alohwwqfe Njk Heating capacity: approx. 22 kW Number of control zones: 4 Max. operating temperature: 260°C Max. operating pressure: 400 to 500 bar Hydraulic unit designed for quick change (accumulator pre-charged with nitrogen) Throughput capacity: 800 to 2000 kg/h Weight: 950 kg

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 406.168 km, moč: 188 kW (255,61 KM), prva registracija: 06/2016, vrsta goriva: dizel, velikost pnevmatike: 265/70R19.5, konfiguracija osi: 4x2, medosna razdalja: 3.800 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 400 l, zavore: intarder, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, število prestav: 6, emisijski razred: Euro 6, število sedežev: 2, skupna dolžina: 7.720 mm, skupna širina: 2.600 mm, skupna višina: 3.470 mm, dovoljena osna obremenitev (os 1): 5.000 kg, dovoljena osna obremenitev (os 2): 8.480 kg, dolžina tovornega prostora: 5.660 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.250 mm, Leto izdelave: 2016, Oprema: ABS, AdBlue, USB priključek, centralno zaklepanje, dvižna zadnja plošča, električno nastavljivo ogledalo, električno upravljanje oken, filter saj, greljenje sedeža, klimatska naprava, meglenke, nadzor oprijema, popolna servisna zgodovina, servovolan, tempomat, zapora diferenciala, General Information Cab: single Registration number: BD-182-H Technical Information Number of cylinders: 6 Engine displacement: 7,698 cc Axle Configuration Tire size: 265/70R19.5 Front axle: Max. axle load: 5,000 kg; Steered Rear axle: Twin tires; Differential lock; Max. axle load: 8,480 kg Weights Unladen weight: 8,879 kg Payload: 3,111 kg Gross vehicle weight: 11,990 kg Functional Tail lift: DHOLLANDIA DHSM.20, foldable platform, 1,500 kg Cooling: -30 °C to 30 °C Body manufacturer: Supra 750 MT Lamberet Refrigeration unit: Diesel and electric (6,703 operating hours, diesel) Wall thickness: 100 mm Interior Interior color: grey Maintenance APK (Periodic Technical Inspection): valid until 03/2027 Condition Technical condition: very good Visual condition: very good Damage: none Number of keys: 2 Further Information Please contact Moussa or Youssef for further details. = Additional Options and Features = - ATP certificate - Heated exterior mirrors - High beam - Front Assist - Low noise - Speed limiter - Lane assist - LED lighting - Air suspension - Multifunction steering wheel - Multi-temp - Particulate filter - Radio/CD player - Spare wheel - Sliding door right - Side door - Sun visor - Stability control - 380V Standby - Toolbox - Twin tires = Remarks = Video: Volvo FL250 Euro 6, NEW MODEL Refrigerated/deep-freeze truck, full CVO vehicle available / ATP certificate Carrier Supra 750 MT Multitemp (refrigerates/freezes and heats) +30 °C to -30 °C Day and night cooling, 380V standby (cooling with autonomous diesel engine or electric drive) Kedey Anz Ijpfx Al Nsdk 1 or 2 compartments with sliding partition (adjustable separately) Gross total weight 11,990 kg, payload 3,011 kg 406,000 km, fully dealer-maintained DHollandia sliding tail lift 1,500 kg Technically and visually in very good condition Cooling system operates flawlessly Cooling: -30 °C to 30 °C Refrigeration unit: diesel and electric Refrigeration unit brand: Carrier

Stanje: rabljeno, prevoženi kilometri: 279.709 km, moč: 184 kW (250,17 KM), prva registracija: 02/2016, vrsta goriva: dizel, lastna masa: 7.580 kg, največja dovoljena obremenitev: 7.820 kg, skupna masa: 15.400 kg, konfiguracija osi: 4x2, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, prostornina tovornega prostora: 39 m³, dolžina tovornega prostora: 6.940 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.290 mm, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), filter saj, hladilna enota, klimatska naprava, nadzor oprijema, računalnik na krovu, tempomat, zapora diferenciala, Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both procurement and sales extend beyond national borders, which is why you will generally find the export price in our listings; this price applies regardless of the place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures it is regularly updated. This information is intended as non-binding general information and does not replace detailed individual advice when making a purchasing decision. Only the terms specified in the purchase contract are binding. Subject to changes, errors, typographical mistakes, and prior sale. Kdodpfovih Ntex Al Nok Only our general terms and conditions apply. Languages - We speak English - On parle français - ?? ????? ?? ???? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Stanje: novo, Leto izdelave: 2026, Table Version - High performance - Belt sander unit height-adjustable 0–90° - Maximum usable surface for flat grinding - Belt tracking with fine adjustment Kedpfx Ajhhiaaol Nodk Combined belt and grinding machine - Longitudinal fence for material guidance - Perfectly balanced, low-vibration operation - Dual-sided connection for dust extraction Ø 50 mm - Motor protection switch with undervoltage release - Fixed stop - 1 standard abrasive belt (brown), grit 80 - 1 grinding wheel 250 x 40 x 51 mm, grit 80 - Spark protection - Power cable with CEE plug Optional extras / surcharge: - Machine stand, emergency-stop pushbutton, brake, and extraction / €2,260 (Item 330.370) - Machine stand, emergency-stop pushbutton, and brake / €1,030 (Item 330.365) - Machine stand with water immersion tank / €360 DELIVERY: FREE OF CHARGE (within Germany) COULDN'T FIND THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT PRODUCT RANGE! REQUEST A QUOTE!

Stanje: novo, Leto izdelave: 2026, Machine à ruban haute performance avec descente hydraulique du cadre (vanne de réglage) pour coupes d’onglet de 0° à 60° à droite / 45° à gauche Cadre de scie en fonte rigide et robuste Brosse de nettoyage des copeaux entraînée Avance de coupe par le poids du cadre Réglage et blocage de l’onglet manuels Étau à serrage rapide, déplaçable Pompe électrique pour liquide de refroidissement Guides de lame carbure de précision, rectifiés (réglables) Large table de support ronde, pivotante pour coupes en onglet, indicateur d’angle (échelle) côté opérateur Bac à copeaux facilement amovible Butée de matière 500 mm avec échelle Lame de scie à ruban avec pas de dents combiné 4/6 incluse. Kjdpfexlhmysx Al Nedk Données techniques Moteur triphasé 400 V, 1,5 kW Dimension de la lame : 2720 x 27 x 0,9 mm Volants Ø 325 mm Vitesse de coupe : 20 à 120 m/min Ouverture de l’étau : 320 mm Hauteur de travail : 760 mm Poids : 390 kg Dimensions de la machine (L x P x H) : 1480 x 1700 x 2000 mm

Stanje: novo, Leto izdelave: 2026, Fully hydraulic lowering and raising function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off at the end of the cut, with return of the saw arm to the starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short stroke cylinder for the vise Precisely ground, adjustable carbide saw band guides Electric coolant pump Manual band tensioning with indicator, including electric monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Rotating chip removal brush Large, solid round support table, rotates for miter cuts with preset cutting channel; miter adjustment manual, scale reading Material stop 500 mm with scale Incl. comb-tooth saw band 4/6 Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 Motor, three-phase 400 V, frequency controlled 1.5 kW Saw band size 2910 x 27 x 0.9 mm Flywheel diameter 325 mm Cutting speed 20–120 m/min Vise opening width 320 mm Working height 760 mm Cutting capacity: at 0° = Round D 250 mm, Square 240 x 240 mm, Rectangle 320 x 190 mm Machine dimensions (W x D x H) 1480 x 1700 x 2000 mm Weight 420 kg Kedpfx Alecl Tc Ae Njdk For further accessories, please inquire. DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU ANY PRODUCT FROM THE FLOTT RANGE! REQUEST A QUOTE!

Stanje: novo, številka stroja/vozila: S-CL-250-FN-EC, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, volumenski pretok: 250 m³/h, skupna višina: 600 mm, skupna dolžina: 340 mm, skupna širina: 430 mm, skupna masa: 35 kg, Oprema: Na voljo je tipska ploščica, ISI S-CLEANER Mechanical Air Filtration Unit (Solder Fume) for up to 2 workstations Type: 250 FN Version: Mobile Control: none Horizontal, mobile mechanical air purifier with EC radial fan for the filtration of solder fume. TECHNICAL DESCRIPTION: Airflow: - 240 m³/h (nominal airflow) - 170 m³/h (effective air output) (depends on filter configuration, without extraction hoods) Suction ports: 2 x NW 50 mm (rear) Filter configuration: Kodpfx Asvrylfjl Nsdk - Prefilter G4 - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Colour: RAL 7035 light grey (custom colour on request) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Airflow output: not adjustable Dimensions: Length 340 mm / Width 430 mm / Height 600 mm Weight: 35 kg

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 67.000 h, vpenjalna sila: 250 kN, delovna prostornina: 530 cm³, tlak vbrizgavanja: 2.426 letvica, skupna masa: 14.200 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto Kdjdpfx Aewlkcajl Nek

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 67.000 h, vpenjalna sila: 250 kN, delovna prostornina: 530 cm³, tlak vbrizgavanja: 2.426 letvica, skupna masa: 14.200 kg, premer polžastega transporterja: 50 mm, Terms of payment: 100% net payment before collection of the machine Delivery time: to be agreed Freight terms: ex works Kdjdpfx Aljwz R Iuo Nek

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 468 kg, največja dovoljena obremenitev: 1.532 kg, skupna masa: 2.000 kg, dolžina tovornega prostora: 2.530 mm, širina tovornega prostora: 1.640 mm, višina nakladalnega prostora: 300 mm, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, MARTZ Tipper 250/2 C S 2T NEW VEHICLE Internal dimensions: 253 cm x 152 cm Side wall height: 30 cm Loading platform height: 80 cm Gross vehicle weight: 2000 kg Payload: 1532 kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2x axles with 1350 kg brakes each Low chassis Fully welded, hot-dip galvanized steel frame Aluminum side walls with tension locks Folding and removable on all sides Galvanized steel floor Jockey wheel 6 lashing rings Reinforced 13'' C-type tires with steel valves M+S tires Net/rope hooks on the frame 13-pin plug Front marker lights Rear lights with reversing light, fog light, and triangular reflectors Upper frame mounted on rubber bearings Manual pump with stowable handle Safety lock for upper frame OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 ONWARDS - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Loading ramps - Folding crank rear supports - Complete LED lighting - Anti-theft lock - Fine- or coarse-mesh net - H-frame Kdsdpfx Aljw A I Eto Nsk - Mesh side extensions in various heights, also with closed design - Additional side walls, steel or aluminum, 30 cm high with tension lock - Flat cover, with or without bows - High cover, 140 cm Additional accessories available upon request! Plus shipping to Gera and vehicle registration certificate: €200 net Images are for reference and may show optional extras subject to surcharge. Haven’t found the right trailer yet? We have 50–100 vehicles in stock, available immediately for collection. Workshop open weekdays from 8:00–17:00 for all types of repairs. Specialist in axle repairs, including for caravans. We also stock a wide range of spare parts and accessories for trailers from various manufacturers. Visit us online or come by in person!

Stanje: dober (rabljeno), Leto izdelave: 1994, Tlačna sila: 250 t Iztek: 360 mm Kedpfx Alsy Amxxo Nodk Velikost mize: 1250 x 630 mm Premer mize: 250 mm Vpenjalna površina bata: 850 x 450 mm Vgradna višina: 800 mm Hod bata: do 500 mm Premer bata: 400/360 mm Hitrost bata navzdol: 200 mm/s Hitrost bata navzgor: 110 mm/s Skupna potreba po moči: 20,5 kW Približna masa stroja: 8 t

Stanje: rabljeno, Leto izdelave: 2008, Screw diameter: 18 mm Clamping force: 250 kN Max. opening stroke: 350 mm Mould installation height: 200 mm Control system: Selogica Operating hours: 52,492 h ARBURG ALLROUNDER 270 S 250-70 – Injection Moulding Machine – Year of manufacture: 2008 – Excellent condition For sale is a reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection moulding machine from 2008. The machine is ideal for precision plastic parts in small to medium batch sizes and stands out with its robust construction and renowned ARBURG quality “Made in Germany”. Technical highlights: - Clamping force: 250 kN - Injection unit: size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Tie bar spacing: approx. 270 x 270 mm - Mounting plates: approx. 380 x 380 mm - Connected load: 53 kW Electrical equipment: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current draw: 89 A Further information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term spare parts availability ensured Inspection possible by arrangement. Further information, photos, or videos available upon request. Kedpfx Asywzv Isl Njdk - Operating hours: 52,492 h, 7,085,048 cycles - Centering ring adapters ø125mm - Blow moulding unit included

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW Kedpfx Asx D Rqrol Nedk • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Zapiralna sila: 25 ton Razdalja med stebri: 270x270 mm Kjdevl Skgopfx Al Nodk Največja odprtina: 275 mm Višina orodja: 200 mm Velikost orodne plošče: 400 x 400 mm Premer polža: 18 mm Volumen vbrizga: 20 cm3 Masa brizga: 17 g Tlak vbrizga: 2500 bar Delovne ure: 38.035 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Arburg 270 S-250 - 60 Kodpex I Rdvjfx Al Nedk Zapiralna sila: 25 ton Leto izdelave: 2002 Razmak med stebri: 27 x 27 cm Krmiljenje: S Vključuje transportne trakove

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Kodpslz Rvljfx Al Nedk Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate): Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: novo, lastna masa: 614 kg, največja dovoljena obremenitev: 1.386 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.530 mm, širina tovornega prostora: 1.550 mm, skupna dolžina: 1.630 mm, skupna širina: 990 mm, skupna višina: 3.930 mm, vzmetenje: jeklo, velikost pnevmatike: 165R13C 96/94N, This tipper features a frame construction with a closed profile, which increases its stability. It utilizes a 5-stage cylinder, allowing for a larger tipping angle (up to 55°). All side panels can be opened and removed. The model is also equipped with a steel floor. | KIPPER 250/2 C S 2T rear tipper | Galvanized frame | Lockable recess for 2 loading ramps incl. ramps (L: 243 cm, W: 30 cm) | Platform dimensions: L: 2.53 m, W: 1.52 m, side panel height: 0.40 m, loading height: 0.70 m | 4 recessed lashing rings (2 left, 2 right) in the floor | Knott axle with drum brake | Leaf suspension | Operating voltage 12V | Spindle parking brake | Subject to errors, input mistakes, and prior sale. Kdjdpfou R D Sdex Al Nok

Stanje: dober (rabljeno), Manufacturer: MBT Kdjdpfxehzr U Is Al Njk Model: MV-250 S Motor: 5.5 kW Hopper size: 780 x 600 mm Housing dimensions: 3500 x 1000 x 2200 mm

Stanje: dober (rabljeno), Leto izdelave: 1981, HEISSPRESSE PLATTENABMESSUNGEN: 2500 x 1300 mm Kedjwup U Hopfx Al Njdk ERWÄRMUNG DER PLATTEN DURCH HEISSWASSER 6 HYDRAULIKZYLINDER VON DER UNTERSEITE MAXIMALER PLATTENABSTAND: 450 mm GESAMTPRESSDRUCK: 120 Tonnen GUTER ZUSTAND

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Arburg 270 S 250-60 (2004) Zapiralna sila: 25 t Razdalja med veznimi palicami: 270 mm × 270 mm Dimenzije plošč: 400 mm × 400 mm Maks. hod odpiranja orodja: 275 mm Min. višina orodja: 198 mm Maks. dnevna odprtina: 279 mm Hod izmetalca: 95 mm Kjdpoxl Tp Tsfx Al Nsdk Sila odpiranja orodja (maks.): 14 kN Dimenzije stroja (Š × D): 1250 mm × 3800 mm Teža stroja: ca. 1900 kg Premer polža: 22 mm Prostornina hoda: 39 cm³ Tlak vbrizga: 1810 bar Količina vbrizga (2 črpalki): do 8,1 cm³/s Zmogljivost materiala (PS): do 22,0 kg/h Leto izdelave: 2004 Tip: hidravlični brizgalni stroj

Stanje: delavnici obnovljeno (rabljeno), Precision Lead- and Feed-Screw Lathe Manufacturer: GDW Model: LZ 250 S Year of Manufacture: 1998 – overhauled, newly painted RAL7035 light grey Machine No.: 069 Centre Height: 125 mm Centre Distance: 500 mm with warranty Geometrical acceptance with inspection report Accessories: - 3-axis digital readout ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool post base unit, size A - Bed stop - Coolant system - Chuck guard with electrical interlock - Chip guard/rear splash guard - Operating manual Ksdpfx Aopz Hubol Njdk – used, as seen –

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: omejena funkcionalnost, skupna masa: 150 kg, Grundfos electronically controlled dry-runner pump TPE 100-250/2-S A-F-A-BAQE-ND1, single-stage inline pump, Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA motor We offer the Grundfos electronically controlled dry-runner pump. ⭐︎ Condition: good (used) The electronically controlled dry-runner pump is used but fully operational. The pump was working flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Nominal flow rate: 135 m³/h Nominal head: 20.1 m Mechanical seal: BAQE Pump casing: cast iron Kdodsyc T Apepfx Al Nek Impeller: cast iron Gross weight: 157 kg For further details, please refer to the nameplate. Scope of delivery as shown in the pictures. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, buyer pays shipping costs. Single-stage volute pump with opposite-sided suction and discharge nozzles in inline design. The suction and discharge nozzles have the same diameter. The pumps are designed according to the top-pull-out principle, meaning the pump head (motor, head piece, and impeller) can be easily removed for maintenance or servicing while the pump casing remains in the piping. The pump is equipped with a non-balanced rubber bellows seal. The mechanical seal complies with EN 12756. Pipe connections via DIN flanges PN 16 in accordance with EN 1092-2 and ISO 7005-2. The pump is fitted with a fan-cooled permanent magnet synchronous motor. The motor efficiency meets energy efficiency class IE5 as per IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated in the motor terminal box. The electronic speed control allows continuous adjustment of the motor speed and thus the pump performance to actual requirements. The pump is equipped with a differential pressure sensor.

Stanje: novo, * IMMEDIATE AVAILABILITY * Including hand pump / solid steel floor Technical Data: • Brand: Martz • Model: KIPPER 250 S • Vehicle type: Rear tipper • Vehicle condition: New vehicle • First registration: No initial registration • TÜV/Inspection: 3 years from initial registration • Internal dimensions (LxWxH): 253 x 152 x 30 cm • External dimensions (LxWxH): 371 x 164 x 111 cm • Permissible total weight: 750 kg • Unladen weight: 323 kg • Payload: 427 kg • Chassis: Platform trailer (wheels below the body) • Tires: 165/70R13 • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes Kdedjx Tbk Dspfx Al Nok • 100 km/h approval: Yes DESCRIPTION • Anodized double-wall aluminum side panels • All side panels foldable and removable • Removable steel corner posts • Mounting option on all 4 corners for tilt frame, mesh extension, side panel extension, or front wall riser • Plastic button fasteners on side panels for securing tarpaulin or flat cover • Sturdy eccentric locks • 44° tipping angle • Manufacturer’s approval for 100 km/h • Highly durable solid steel floor! • Reinforced V-drawbar • Very robust welded steel frame • Frame fully hot-dip galvanized by immersion • Numerous cross members for high point load capacity • Double-acting hand pump for manual tipping • 6 certified lashing points inside side rail (600DaN/kg)! • Unbraked KNOTT rubber-axle suspension • 13-pin electrical plug • Reversing light • Large-dimension safety lighting • Integrated rear fog light • Recessed lighting in rear frame • Centrally positioned jockey wheel Optional accessories – please inquire: • Mesh extension • Side panel extension • Cover net • Flat tarpaulin • Anti-theft device • Spare wheel • Tool/storage box • Reversing light • Lashing straps • And much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary export license plates (Germany) available - Export license plates including customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been specialist dealers & service workshops for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions, and prior sale excepted -