Sumitomo Demag Intelect 2 350/830-2200 Mit Roboter-Sys nakup rabljenega (86.728)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mould installation height: 400 mm Maximum mould installation height: 900 mm (extended) Clamping platen (H x V): 1,168 x 1,144 mm Clear tie bar distance (width x height): 830 x 830 mm Maximum mould weight: 6,600 kg Maximum weight on movable clamping platen: 3,800 kg Maximum weight on fixed clamping platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure programmable over dosing stroke Installed cylinder heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demoulding stroke Y-axis: 900 mm Vertical demoulding stroke X-axis: 1,800 mm Robot console on fixed clamping platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration (special option includes): • Plastification cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication and emergency-stop interface); • Software including functional screens for MuCell control; • Adapted nozzle chamber guard; • Position-controlled high-speed screw (analogous to ZE388) Conveyor belt: Width: 870 mm Useful width: 800 mm Length: 3,500 mm Height: 880-1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Dkjdjy Hmfyopfx Apljl Clear tunnel height: 500 mm This injection moulding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cc Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping unit design: toggle Control system: NC5 Dkodsy Dqh Hjpfx Aplol Additional equipment: Euromap 67 Robot interface Controller with pneumatic valve Controller for 5 hot runners Injection unit hardened – bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 Robot Year of manufacture: 2016 6-axis robot: 5 axes powered by electric servo motors: X, Y-telescopic, Z, B, C Travel distances: X-1200, Y-2400, Z-4000 mm Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Robot and conveyor belt can be purchased at additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are test-run by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR833 robot Year of manufacture: 2012 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Shot volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping mechanism: toggle lever Dkodpfx Aoy Dqidopljl Control system: NC5 Additional equipment: Euromap 67 Robot interface Air valves x 5 Hydraulic core pull with proportional valve control x 1 Hot runner control x 5 Hardened injection unit - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 variable output hydraulic pumps Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes are driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Travel paths on axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt and protective enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 15.642 h, premer vijaka: 45 mm, skupna višina: 2.213 mm, skupna masa: 15.750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection molding machine, ideal for precise plastics processing. Take advantage of the opportunity to purchase this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection molding machine. Contact us for further information. Additional Equipment • Fanuc robot Machine Advantages Qualitative Machine Advantages • Process data acquisition, mold protection Technical Machine Advantages • Minimum mold height: 350 mm / maximum mold height: 745 mm • Electronic main connection: 3/400 V 50 Hz • Programmable process, high dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Additional Information Standard Equipment: Support of the moving platen via linear guides/ Short/long stroke ejector/ Interface for external printer (hardcopy)/ Individual axis motion optimization (activeAdjust)/ Four-stage mold closing and four-stage mold opening process/ Increased pump drive power II (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3-phase + N + PE/ Separate mains connections for drive/heating/ Color data display/ Reinforced oil cooler (cooling water supply up to 35 °C)/ Separate water connections for mold and machine cooling/ Basic version Europe/ Corrosion protection/ Paintwork: Jet black (RAL9005): machine bed with installations, lower control cabinet/ Signal white (RAL9003): clamping unit, injection unit, nozzle protection/ Signal white (RAL9003): fixed safety devices, upper control cabinet/ Signal white (RAL9003): safety doors/ Structured Surfaces: Elastic machine mounts/ Digital and wear-free position measuring system (ultrasonic/high-resolution encoder for injection, mold, and ejector movement)/ Mold connection dimensions Type E (according to EUROMAP March '96)/ Centering diameter fixed platen: 160 mm/ Centering diameter moving platen: 160 mm/ No side ejector plate/ Dkedpjx D Hntjfx Apljl Standard Mold Installation Height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety door closed)/ Ejector with position control (P/F+V independently programmable, parallel to mold movement)/ Oil lubrication of toggle lever/ Injection unit/ Optional Equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for fine filtering in bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), switchable via main switch/ Socket IECEE 3Ph / 400V-16A, switchable via main switch/ Warning light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on moving platen (programmable)/ 6 pneumatic 5/2-way valves on fixed platen (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with check valves)/ Manual pressure relief for core pull 1-circuit/ Operator-side safety guarding extended (250 mm)/ Hot runner control 12 zones, integrated (2.75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force regulation/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with discharge option/

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 8.000 h, vpenjalna sila: 500 kN, premer vijaka: 25 mm, injekcijska masa: 46 g, skupna višina: 1.779 mm, skupna masa: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Included with the machine are a granulate dryer, an industrial robot, a conveyor belt, and temperature control units. Ideal for high-quality injection moulding processes. Please contact us for more information about this machine. Additional Equipment Dodpfx Apsx D Eccjlskl • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm • Precision scale • Temperature control units – 2x HB-Therm Machine Advantages Technical Machine Advantages • Exceptional energy efficiency • Increased platen rigidity and mould safety • Fully electric direct drive • Ultra-precise direct drive motors with a response time of 0.1 ms • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping platens: 520 x 570 mm Additional Information Control Unit Modern control system with NC5+ Automatic adjustment of mould height and clamping force Energy-saving routines Dimensions Machine depth: 4308 mm

Leto izdelave: 2019, obratovalne ure: 17.716 h, stanje: pripravljen za uporabo (rabljen), Splošni podatki Širina: 1920 cm Globina: 7750 cm Teža stroja: 26.210 kg Višina: 2410 mm Dksdpfxex D Nx Ij Aplel Ta električni stroj za brizganje SUMITOMO SHI DEMAG El-Exis SP 350/820-920 je bil izdelan leta 2019. Robusten električni stroj za brizganje s premerom polža 40 mm in zapiralno silo 3.500 kN. Deloval je 17.716 ur in izvedel 12.440.761 ciklov, kar omogoča obsežne proizvodne zmogljivosti. Razmislite o nakupu električnega stroja za brizganje SUMITOMO SHI DEMAG El-Exis SP 350/820-920. Za več informacij nas kontaktirajte. Vrsta uporabe Brizganje plastike

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 27.551 h, vpenjalna sila: 2.200 kN, skupna višina: 2.100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It is an electric injection moulding machine renowned for its precision and efficiency. Ideal for anyone looking to expand their production capabilities with reliable technology. Contact us for further information. Additional Equipment Dkjdpsx D Hnysfx Aplol • Sepro robot SDR 22 Machine Advantages Technical Machine Specifications • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / max. shot volume: 329 cm³ / max. shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Metering stroke: 207 mm / max. nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kN / number of heating zones: 4 / hopper capacity: 50 l / max. injection speed: 160 mm/s • Clamping force: 2420 kN / max. opening stroke: 550 mm / min. mould height: 300 mm / max. mould height: 580 mm / max. platen distance: 1130 mm • Platen size (h x v): 880x830 mm / tie bar spacing (h x v): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kN • Dry cycle time according to Euromap 6 (stroke): 427 mm • Net weight without oil: 10,100 kg Dimensions Machine depth: 6460 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 17.577 h, vpenjalna sila: 1.600 kN, skupna višina: 2.060 mm, This SUMITOMO SHI DEMAG IntElect 160/520-340 smart was manufactured in 2013. It is an all-electric injection molding machine known for its precision and efficiency. If you are in the market for a high-quality injection molding machine, consider the SUMITOMO SHI DEMAG IntElect 160/520-340 smart, which we are offering for sale. Contact us for further information. Additional Equipment • Sepro Robot SDR 11 Machine Advantages Technical Machine Specifications • Clamping unit: 160 / clamping force: 1760 kN / max. opening stroke: 495 mm / minimum mold height: 275 mm / maximum mold height: 585 mm • Distance between platens, max.: 1080 mm / platen size (H x V): 760 x 785 mm / tie bar spacing (H x V): 520 x 520 mm • Ejector stroke: 125 mm / ejector force: 35 kN • Injection unit: 340 / screw diameter: 35 mm / L/D ratio: 20 / injection volume (PS), without accumulator: 288 cm³/s • Metering stroke: 162 mm / max. nozzle stroke: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact force: 30 kN • Material hopper capacity: 35 l / max. injection speed, standard: 300 mm/s / max. injection speed, increased: 500 mm/s • Net weight without oil: 7300 kg Additional Information Electrical and pneumatic interfaces: - Sockets: - 2 x Schuko (1Ph, 230V, 10A) - 2 x IECEE (3Ph, 400V, 16A) – switchable via main switch - Additional Schuko socket also available (same specification) - Valves: - 1 x pneumatic 5/2 valve on moving platen (programmable) - 2 x pneumatic 5/2 valves on stationary platen (programmable) - I/O: - 3 digital inputs / 3 digital outputs (freely programmable) - Terminal strip outside the control cabinet Air & Cooling: - Central air supply and piping - Cooling system: open circuit - Cooling water controller: 4 circuits with temperature display (max. 10 l/min per circuit) - Separate water inlet for cooling (mold + machine) - Mold cooling shutoff (time programmable) Mechanical Features & Movement: - Clamping and injection unit colors: - Jet black (RAL9005): bed, pump station, lower control cabinet - Signal white (RAL9003): clamping unit, injection unit, safety covers, guards, safety doors - Platen layout: E standard (similar to EUROMAP, March 1996) - No side ejector plate - Ejector: held in front position by spring-loaded mold ejector - Standard mold height - Standard closing speed - Active movements only when guard is closed - Screw: wear-resistant nitrided cylinder, standard L:D, 35 mm diameter - Non-return valve: 3-piece, ring-shaped Dkodox D Hnmspfx Aplel Control, Programming & Monitoring: - Inputs/outputs and sequence freely programmable - Switch programs (e.g., dry run, start-up scrap counter, timed cooling) - Injection process: - Injection force at max. injection speed: 200 mm/s - Back pressure programmable via 6-point polygon - Hold pressure switchover depending on melt pressure - Post-injection, back pressure, dosing: closed-loop control - Feed throat temperature control: closed-loop, max. 90°C ±9°C - Reduced nozzle closure force (programmable) - Clamping force: closed-loop controlled

Leto izdelave: 2019, obratovalne ure: 18.138 h, stanje: pripravljen za uporabo (rabljen), skupna masa: 25.340 kg, Ta stroj SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 je bil izdelan leta 2019. Gre za robusten električni stroj za brizganje plastike s premerom polža 50 mm, zapiralno silo 3.500 kN in razmakom med stebri 820 mm. Obdelal je 18.138 delovnih ur in opravil 12.875.090 ciklov. Če iščete zmogljiv in kakovosten stroj za brizganje, priporočamo, da razmislite o tem modelu SUMITOMO SHI DEMAG El-Exis SP 350/820-1600, ki je naprodaj pri nas. Dodatne informacije • Premer polža: 50 mm Dsdpex D Nxzofx Aplskl • Največji dozirni volumen: 530 cc • Število ciklov: 12.875.090 • Razmak med stebri: 820 mm • Zapiralna sila: 3.500 kN

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS Robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Metering volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Djdpfx Apoy Dqhyjlskl Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet operation Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Main drive motor – servomotor driven with inverter – energy saving Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); A and C axes (rotation) – pneumatic Touch control panel Safety package for robot Robot with adapter, protective enclosure Robot available for additional price Dimensions: Weight: 4,400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided or you may participate in live technical demonstrations at our facility in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Sumitomo Demag IntElekt 50/370-200 / Električni stroj za brizganje Leto izdelave: 2009 Brizgalna enota: Premer polža: 25 mm Brizgalna teža: 39 g Brizgalni tlak: 1580 bar Dozirna prostornina: 44 ccm Zapiralna enota: Zapiralna sila: 50 t Razdalja med stebri: 370x370 mm Velikost pritrdilnih plošč: 520x570 mm Izmetalnik: električen Zapiralna enota: kolenčasto vzvodna Krmiljenje: NC5 – zaslon na dotik Dodatna oprema: Električni stroj: visoko zmogljiv, varčen in zelo tih Euromap 67 Robotski vmesnik Zračni ventili x 4 Krmiljenje z vročimi kanali Brizgalni agregat kaljen – bimetal Centralno mazanje Možna je menjava premera polža Dimenzije: Teža: 4750 kg Dolžina/Širina/Višina: 4,20x1,26x1,84 m Pogon: Ogrevalna moč: 5,7 kW Dkjdpfx Apjy Dp E Relol Vsi ponujeni stroji so pred prodajo zagnani s strani naših servisnih tehnikov. Možno je prejeti video tehničnih testiranj izbranega stroja ali osebno sodelovati pri tehničnem preizkusu v našem podjetju v Łódźu. Cena: Po dogovoru

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. Dsdpfex D Rqrjx Apljkl • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 47.000 h, vpenjalna sila: 320 kN, delovna prostornina: 891 cm³, tlak vbrizgavanja: 2.420 letvica, skupna masa: 17.300 kg, premer polžastega transporterja: 60 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto Dedpfx Asx E A Twjplekl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, obratovalne ure: 30.665 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 196184, vpenjalna sila: 1.500 kN, premer vijaka: 50 mm, razmak između stupova: 470 mm, Oprema: dokumentacija / priročnik, Here we offer, as dealers in injection moulding machines, the following well-maintained pre-owned injection moulding machine for sale. Of course, we also purchase well-kept injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: From 01/07/2025, used machines can also benefit from a special depreciation allowance of 30% annually. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Used injection moulding machine with 2 additional available injection units (25 and 35 mm), currently fitted with 50 mm injection unit. See downloadable document. Manufacturer: Arburg Model: 470C 1500-350 Year of manufacture: 11/2004 Machine no.: 196184 Control system: Selogica Operating hours: 30,665 h Regular servicing by manufacturer Clamping unit Clamping force: 1,500 kN / 150 tons Tie bar distance: 470 x 470 mm Mould mounting plates: 650 x 650 mm Ejector stroke: 175 mm Opening stroke: 500 mm Mould installation height: 250 mm Distance between platens: max. 750 mm Injection unit 50 mm (highly wear-resistant) Injection volume: 392 cm³ Shot weight: 359 g Screw diameter: 50 mm Injection pressure: 1,670 bar Extras: 2 additional injection units: 25 mm and 30 mm 1x core pull Conveyor belt integrated in the machine bed Handling interface Sorting unit 2 x air blow-off Dsdpfx Ajw Rm Hdjplekl Accumulator for fast injection Electrical connection for pneumatic needle shut-off nozzle Technology level 2, servo-controlled variable delivery pumps 9 electrical heating circuits Interface for mould temperature control unit Interface for dosing/coloring device Equipment package Extended monitoring functions Extended movement options Production control Optimization / operator aids Quality assurance Documentation Any visible peripheral devices that are not specifically mentioned are not included in the scope of delivery. - Immediately available ex our Hannover warehouse, loaded free of charge or delivered free to your door against freight cost. - Function-tested (warranted functional until first commissioning).

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 25.500 h, vpenjalna sila: 10.000 kN, premer vijaka: 110 mm, delovna prostornina: 3.136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Dedpfeygk Eisx Aplekl

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7363-0044, Plastová vstřikovací lis | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Uzavírací síla [kN]: 1 000 Počet komponentů: 1 Šířka upínací desky [mm]: 600 Dkedpfx Apsygiafjlsl Výška upínací desky [mm]: 600 Světlá vzdálenost mezi táhly vodorovně [mm]: 420 Světlá vzdálenost mezi táhly svisle [mm]: 420 Průměr centrovacího kroužku [mm]: 125 Minimální instalační výška [mm]: 250 Maximální instalační výška [mm]: 500 Maximální otevření [mm]: 500 Maximální zdvih vyhazovače [mm]: 150 Závit [M]: 16 Maximální hmotnost formy [kg]: 780 Maximální hmotnost formy na pohyblivé straně [kg]: 500 Průměr šneku [mm]: EE1:35 Maximální dávka vstřiku [g] PS: EE1:149 Uspořádání agregátu: EE1: horizontální Výbava: 1x jádrový tah, balicí stanice, s robotem Prohlídka je možná kdykoli po dohodě. Volně naložený na kamion (Butzbach).

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Nadelverschlussdüse ( Federbetätigt ), Needle shut-off nozzle (spring-actuated) Dedpev Ancgjfx Aplekl Thread: M60x3 Designation: G70 1198 / 392/199 Condition: New

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7169-2037, Stroj za brizganje plastike (povsem električni) | Sumitomo SHI DEMAG - IntElect 100/470-340 (1000-340) Zapiralna sila [kN]: 1.000 Število komponent: 1 Širina zapiralne plošče [mm]: 620 Višina zapiralne plošče [mm]: 620 Razdalja med vodili horizontalno [mm]: 470 Razdalja med vodili vertikalno [mm]: 420 Premer centrirnega obroča [mm]: 125 Višina vgradnje min [mm]: 200 Višina vgradnje maks [mm]: 430 Največja odprtina orodja [mm]: 380 Hod izmetača maks [mm]: 115 Navoj [M]: 16 Največja masa orodja [kg]: 780 Največja masa orodja premična stran [kg]: 500 Premer polža [mm]: EE1:35 Največja masa brizga [g] PS: EE1:139 Dkedpfsygib Njx Aplol Razpored agregata: EE1: vodoravno Oprema: Pakirna postaja, z robotom Ogled je možen kadarkoli po dogovoru. Prosto naloženo na tovornjak (Butzbach). ----- #Tags: Sumitomodemag | Intelect | 100-470-340

Stanje: dober (rabljeno), barva: bela, dvižna višina: 51.000 mm, Leto izdelave: 2011, obratovalne ure: 36.894 h, Pogonski sklop Znamka motorja: Isuzu Teže Lastna teža: 132.000 kg Funkcionalno Dvigalo: Rešetkasta konstrukcija Dolžina dvigala: 5.100 cm Dvižna zmogljivost: 135.000 kg Stanje Tehnično stanje: dobro Vizualno stanje: dobro Identifikacija FIN: T02152 Serijska številka: SC150-7097 Dodatne informacije Emisijski standard: Stage II / Tier II Dobavni pogoji: EXW Djdpfx Apsywrgqeljkl Transportne dimenzije (D x Š x V): 9.445x6.365x4.023 Država proizvodnje: JP Min. dolžina iztegljive roke: 150000 cm Dodatne informacije Za več informacij se obrnite na Antonio Francisco Pinto, Jeroen Heindryckx, Bart Apers ali Matthias Eyckmans. = Dodatne možnosti in oprema = - Podkavlji

Stanje: pripravljen za uporabo (rabljen), KUKA robot KK4EY-YYYY-033 AC servomotor SN, strokovno v celoti obnovljen in preizkušen z 12-mesečno garancijo, 100% delujoč, obseg dobave v skladu s fotografijami. Na ta artikel ne veljajo dogovorjeni prodajni popusti. Cena na zahtevo! Dsdpfx Apsrbw Uqjljkl

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 35.000 h, vpenjalna sila: 100 kN, delovna prostornina: 51 cm³, tlak vbrizgavanja: 2.800 letvica, skupna masa: 5.000 kg, premer polžastega transporterja: 25 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Djdpfswlkb Njx Aplskl Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: rabljeno, Leto izdelave: 2007, - Sumitomo Demag IntElect 210/580-1000, rok výroby 2009: 6260 x 1555 x 2219 mm (DxŠxV), čistá hmotnost 11 000 kg. - Sumitomo Demag IntElect 210/580-1000, rok výroby 2009 (bez zobrazené manipulace / temperačních zařízení / materiálového zásobování [zásobník, dopravní zařízení]). Označení SGM Provozní hodiny Počet cyklů Vyhřívání válce Elektrické pohony Sumitomo Demag IntElect 150/520-610 29 125 26 530 3 562 329 Sumitomo Demag IntElect 210/580-1000 27 297 25 717 3 450 308 Vstřikovací lis Sumitomo Demag IntElect 150/520-610, rok výroby 2007 (bez zobrazené manipulace / temperačních zařízení / materiálového zásobování [zásobník, dopravní zařízení]). Označení SGM Provozní hodiny Počet cyklů Vyhřívání válce Elektrické pohony Dodpow E N S Tofx Aplokl Sumitomo Demag IntElect 150/520-610 29 125 26 530 3 562 329 - Sumitomo Demag IntElect 150/520-610, rok výroby 2007: 5348 x 1468 x 2400 mm (DxŠxV), čistá hmotnost 7 400 kg. Demag 150: Průměr šneku Ø 45 mm

Stanje: rabljeno, Electric chain hoist, electric lifting gear, crane DEMAG type DKES 2-200 K V2 DI with Dematik BUS control via crane system control Serial no. 61456646 Year of manufacture: 2003 Load capacity: 200 kg Hook path: 4.0 meters Main lifting speed: 14.0 / 19.2 m/min. Creeping (fine) lifting speed: 0.20 m/min. Chain size: 4.2 x 12.2 mm 1 fall = 200 kg - with DKES2/5 500V control logic - without crane radio remote control - Dematik BUS control via crane system control - without trolley Power connection: 400 Volt, 50 Hz Rated power: 750 W Dodpfxogd Ipno Aplokl Rated current: 2.4 A Good condition

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5062-0AG01-2 - Z servomotor, Z = glej tipsko tablico, SN: NEF185298302001, strokovno popolnoma obnovljen in preizkušen z 12-mesečno garancijo, 100 % delujoč. Obseg dobave v skladu s fotografijami. Za ta artikel dogovorjeni popusti ne veljajo. Cena na zahtevo! Dksdpfx Apsi D R N Delel

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5062-0AG01-2 3~ trajni magnetni motor SN: EF185398301003, strokovno popolnoma obnovljen in testiran z 12-mesečno garancijo, 100% delujoč, obseg dobave skladno s fotografijami. Za ta artikel dogovorjeni popusti ne veljajo. Prosimo, ceno povprašajte posebej! Djdpfei D R N Sex Aplskl