Stroj Za Ostrenje Svedrov 8-30 Mm, Novo nakup rabljenega (124.583)

Stanje: novo, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, This is a drill bit sharpening machine for bits from 8 to 30 mm, with an adjustable point angle from 90° to 140°. Standard equipment includes: CBN grinding wheel for HSS drill bits (service life for at least 3,000 bits) Cedpfx Ahsyn Riwoxsgt A diamond grinding wheel for carbide bits is also available for €90.00. Sharpening a drill bit is completed in three steps. First, the bit is properly clamped into a fixture, then sharpening and point thinning follows. Finished in less than a minute! Before clamping the drill bit, the diameter is set using a rotary dial on the grinding machine. The drill bit, with the appropriate collet, is aligned and clamped to the stop in the left holder of the machine. Sharpening the cutting edges and thinning the point is straightforward. Switch on the machine, insert the fixture with the bit into the right holder, gently rotate from stop to stop – the first cutting edge is done. Then, the fixture is rotated 180° and the second edge is ground. Thinning the point works the same way, just in the upper holder. That’s it. Now simply switch off the machine and unclamp the drill bit. A clever design combines an eccentric with a special grinding wheel, so you don’t have to worry about the cutting edge shape or relief angle. The added benefit: both cutting edges are produced with exactly the same setting, ensuring perfect symmetry. Furthermore, the point angle can be freely set between 90° and 140° before sharpening. High-precision collets for diameters from 8 to 30 mm guarantee concentric clamping. The grinding wheel has a service life of over 3,000 uses. Besides the standard CBN grinding wheel for HSS tools, we also offer a diamond grinding wheel for carbide bits. Changing the wheel takes just seconds. The compact design of the drill bit grinder and practical carrying handle make it easy for mobile use. Since almost the entire set of accessories like collets, fixtures, or hex keys are stored on the machine, everything needed is always at hand. The drill bit grinder is energy-efficient and space-saving. Sharpens drill bits with no prior experience – clean, fast and reliable. Shipping weight: 25 kg 23 collets (8 - 30 mm) Standard CBN grinding wheel Machine dimensions: 350 x 290 x 220 mm

Stanje: pripravljen za uporabo (rabljen), Brusilnik orodij, brusilnik svedrov, Schanbacher S3-50 Proizvajalec: Schanbacher Tip: S3-50 Leto: 2012 Cgsdpfxjx Dblts Ahxjt Dimenzije: 460 × 600 × 1260 mm Premer svedra: 3–50 mm; Kot konice: 90°–140° Vključuje: zaščitni pokrov, sistem za odvajanje prahu

Stanje: skoraj kot novo (rabljeno), Expected stock: approx. 840 units. We are offering here a second-choice lattice girder from the manufacturer SSI Schäfer for purchase. Technical data for the lattice girder: Racking system: SSI Schäfer Type: PR 600 Scope of delivery: 01x lattice girder, second-choice Material finish: Sendzimir galvanized Total length: approx. 1,270.0 mm Center-to-center hole: approx. 1,230.0 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Cedoh Eg Agjpfx Ahxogt Material thickness: approx. 1.25 mm Weight per unit: approx. 1.35 kg General information about the item: This item is only offered for collection. If transport or shipping of this item is required, it will incur additional costs, which can be requested individually from us depending on the delivery location or scope of delivery.

Stanje: zelo dobro (rabljeno), We are offering here a second-choice lattice brace from the manufacturer SSI Schäfer for sale. Technical data for the lattice brace: Racking system: SSI Schäfer Type: PR 600 Included in the delivery: 01x Lattice brace, second-choice Material color: sendzimir galvanized Total length: approx. 1,208.8 mm Center-to-center hole distance: approx. 1,168.8 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Cgedpfx Ahsh Eg Anjxst Material thickness: approx. 1.25 mm General information about the item: This item is only offered for collection. If transport or shipping of this item is desired beyond that, it will incur additional costs, which can be requested from us separately depending on the delivery location or the scope of delivery.

Stanje: dober (rabljeno), We are offering a second-choice lattice beam from SSI Schäfer for sale. Technical details for the lattice beam: Racking system: SSI Schäfer Type: PR 600 Scope of delivery: 01x lattice beam, second-choice Material finish: Sendzimir-galvanized Total length: approx. 1,304.4 mm Hole center-to-center: approx. 1,264.4 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm Cgsdpfxoh Eg Acj Ahxet Weight per piece: approx. 1.38 kg General information about this item: This item is available for collection only. If transport/shipping is required, this will incur additional costs, which can be provided separately depending on the delivery location and scope.

Stanje: zelo dobro (rabljeno), We are offering a second-choice lattice beam from the manufacturer SSI Schäfer for purchase. Technical data for the lattice beam: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x Lattice beam, second-choice Material finish: Sendzimir galvanized Overall length: approx. 1,249.2 mm Hole center-to-center: approx. 1,209.2 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm General information about the item: This item is only available for collection. Any additional transportation or shipping of this item will incur extra costs, which can be quoted separately depending on the delivery location and scope. Cjdpfx Aoh Eg Akohxsgt

Stanje: novo, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2025, vrsta upravljanja: ročni, Oprema: CE označba, dokumentacija / priročnik, OMEC 4-Roller Mechanical Symmetrical Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand New “CE” Certified. Made in Italy. Cjdpfxoy E Schj Ahxsgt Double Pinch Design. Powered Upper and Lower Rollers with Equal Drive. Motorized Side Rollers for Vertical Adjustment. Front Opening for Upper Roller. Special Bearings for Side Rollers. External Lever for Roller Tilt Adjustment. Sheet Clamping System with Bearing Device. 2-Pedal Foot Switch. Electrical Panel Compliant with “CE” Standards. Millimeter Scale Indicator for Sheet Clamping Position. Standard equipment included with the rolling machine: - Conical device on the upper roller (frontal). - No. 2 digital position displays for the side rollers. - No. 1 display for motorized sheet clamping. - Grinding/turning of rollers after hardening process. - Roller hardening. - Lateral sheet loading table + sheet centering guides with millimeter references. Working width: 1530 mm. Upper and lower roller diameter: 90 mm. Side roller diameter: 95 mm. Sheet thickness: 1.5 – 2 – 2.5 mm (1.5 x D, 3 x D, 5 x D). Roller hardening: HRC 55/60, depth 2 mm. Installed power: 1.8 kW. Dimensions: 2290 x 750 x 1150 mm. Weight: 690 kg.

Leto izdelave: 2007, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: L110-NC6-NC5-k8-12-S80-104, Keystone Automatic Pointer machine na prodaju Na prodaju je Keystone Automatic Pointer machine u korištenom, ispravnom stanju. Stroj je namijenjen za automatsku obradu/šiljenje drvenih letvi kvadratnog presjeka i predstavlja robusnu industrijsku mašinu za kontinuiranu upotrebu. Keystone strojevi su poznati po čvrstoj izradi, pouzdanom radu i jednostavnom rukovanju. Podaci o stroju: * Proizvođač: Keystone * Model: Automatic Pointer * Stanje: rabljeno * Radno stanje: ispravno * Područje primjene: automatska obrada šiljenja * Izvedba: prepravljena na 380 V i opremljena hidrauličkom jedinicom i transportnom trakom za odvod otpadnog materijala Cgjdoy Epldspfx Ahxst Stroj je moguće pregledati po dogovoru. Dodatne informacije, tehničke podatke, fotografije ili videozapis rada šaljemo na zahtjev. Lokacija: Baranja, Mađarska Pravo na greške i međuprodaju pridržano.

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas - Infinitely variable glue quantity control via operator software Csdpfoxwaz Hjx Ahxsgt - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K...

Stanje: rabljeno, Leto izdelave: 1966, Manual setter for frame saws Meinert P6D DBP Year of manufacture: 1966 Cgodpfxewbq Afo Ahxst with clamping rail Available immediately Location: Austria, near Ried im Innkreis

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Prodajamo stroj EMS 10 U, letnik 1988, št. 187 Stroj je v dobrem stanju – glejte fotografije! Tehnični podatki so razvidni iz navodil za uporabo, povezava do dokumentov je spodaj! Stroj je bil pri nas uporabljen za tračne žage. Priložena so originalna navodila za uporabo. Vabljeni, da nam posredujete ponudbo! Cgjdpfx Aheycfy Hexst Prevzem v 6858 Schwarzach.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Stroj za dresiranje brusnih kolutov za dresiranje kolutov s premerom do 450 mm Enostaven za uporabo, robusten in natančen Naš stroj za dresiranje brusnih kolutov vam nudi neprekosljivo kombinacijo enostavne uporabe in izjemne stabilnosti. Masivno granitno ležišče zagotavlja najvišjo natančnost in dolgo življenjsko dobo, medtem ko uporabniku prijazno upravljanje povečuje učinkovitost vašega obrata. Medtem ko nadaljujete z delom na vašem stroju za brušenje orodij, vam naš stroj za dresiranje prihrani čas in tako tudi denar. Cjdpoy Anykefx Ahxegt

Stanje: dober (rabljeno), Stroj za ostrenje žaginih listov Cedpsy Hgplsfx Ahxsgt Proizvajalec: neznan Premer krožne žage: do pribl. 200 mm Brusni koluti: 160 x 15 mm Priključek: kW Mere žage: 320 x 340 x 500 mm Mere spodnjega omarice: 410 x 410 x 590 mm Dodatki/oprema: Stanje: dobro Teža: 100 kg Dimenzije: 410 x 410 x 1.100 mm

Stanje: rabljeno, Leto izdelave: 2008, Premer brušenja: 160 mm Razdalja med konicami: 645 mm Višina konic: 320 mm Krmiljenje: SIN 840D Hitrost vrtenja: 27.000 obr/min x-os: 550 mm y-os: 235 mm z-os: 300 mm Cgedpfxoxxbzds Ahxjt A-os: 360° C-os: 270° Skupna potrebna moč: 20 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Zelo dobro vzdrževan avtomatski brusilnik za tračne žage za mokro brušenje. Širina lista od 70 do 400 mm. Dolžina lista od 5,6 do 14 m. Razmak zob od 6 do 75 mm. Hitrost podajanja prosto programabilna med 4 in 39 zob/min. Primeren za levo- in desnosmerne tračne žage brez nastavitve, tudi za dvojno zobate. Podajanje in hod brusilne glave sta ločeno krmiljena preko izboklin, kar omogoča zmanjšano hitrost podajanja v korenu zoba. Brez zahtevne elektronike. Števec zob. Odsesovanje brusnega prahu. Vodilni valji. Cedpfx Ahey Eglwsxjgt

Stanje: dober (rabljeno), - Orodna omara s priborom. - S črpalko za hladilno tekočino in odsesovanjem prahu. Dolžina mize: 476 mm Širina mize: 112 mm Vzdolžna pot: 180 mm Prečna pot: 150 mm Miza nagibna +- 30° Csdpfjyzf Hrex Ahxegt Vertikalni hod brusnega koluta: 200 mm Razdalja miza – os brusnega koluta: maks. 250 mm, min. 50 mm Ø med konicami maks. 155 mm Ø brez konjička maks. 215 mm Motor z 2 hitrostma 1500/3000 obr/min. Obrati brusnega vretena 3700/7400 ali obr/min 5000/10000 obr/min.

Stanje: novo, Stroj za tlačne vzmeti Ø2,0 mm/2-osni. Pogon s pomočjo odmičnika (cam-driven). Csdpfelf Ek Dex Ahxogt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Csdsrx Rxtopfx Ahxsgt Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, Drill diameter: 50 mm Total power requirement: 2.2 kW Machine weight approx. 0.6 t Drill Grinder KLINGEL Type BSA 50 Year of manufacture: 1981 Drill diameter: 3 - 50 mm Point angle: 50 degrees Point angle: 50 - 180 degrees Drive power: 2.2 kW Cgedpfx Ahewu Hklexot Weight: 600 kg Electrical diagrams are available - operating manual not included

Stanje: generalkompletno obnovljen (rabljeno), premer brusilnega koluta: 150 mm, leto zadnje generalne obnove: 2026, premer diska: 150 mm, moč motorja brusilnega vretena: 2.200 W, priključek za stisnjen zrak: 5 letvica, The machine has been completely dismantled, wear parts replaced, and repainted – it is in like-new condition. Sale includes a functional warranty. Main features: - For sharpening and re-toothing HSS segment, CV, and solid carbide saw blades using the CBN deep grinding method - Tooth forms A, Aw, B, Bw, and C according to DIN1840 - Grinding of variable pitch teeth (option) - Grinding of special teeth (option) - Grinding of carbide teeth (option) - Grinding of segment teeth (option) - Freely programmable tooth geometry - Grinding repair segments on segment teeth - Beveling alternately top/bottom or on the same side - Continuously adjustable rake and clearance angle - Advanced machine safety hood for easy opening/closing Key advantages: - Short grinding times with high surface quality due to robust machine design, optimized clamping flanges for saw blades, and high drive power - Consistent, repeatable quality thanks to CNC control - Powerful grinding wheel drive - Fully digital servo drives (2 CNC axes) Technical data: - Saw blade diameter: 20–550 mm - Maximum saw blade thickness: 6 mm Cjdopgkgqjpfx Ahxsgt - Number of teeth: 20–999 - Working speed: 3–75 teeth/minute - Coolant pressure: approx. 5 bar at 40 L/min - Grinding wheel drive: 2.2 kW - Dimensions (LxWxH): approx. 1750x1200x1800 mm - Weight net/gross: approx. 800/980 kg - Paint finish: dove blue Accessories: - Software for grinding curved teeth, angled teeth, round grinding (software upgrades available on request) - Saw blade holders for diameters 400, 300, 215, 140 mm (other sizes available upon request) - Reducing rings for bores 16x22, 27, 32, 40, 50 mm (other sizes available upon request) - Base mounting for saw blade holders - Mechanical clamping nut - Coolant system incl. high-pressure pump, mist extraction, and magnetic separator, designed for emulsion cooling - Automatic central lubrication with pressure monitoring (linear guides + ball screw drive) - Operating manual incl. wiring diagrams - Operating voltage: three-phase current Trade-in of your used ECE 45 machine is possible.

Stanje: novo, Leto izdelave: 2026, Brusilni stroj CNC nov model - vse oblike zob - za ostrenje tračnih listov od širine 25mm-400mm širine - lahko se nariše željeno obliko zoba - enostavno programiranje - samodejna pozicija višine žage - avtomatska poravnava brusa - samodejno spreminjanje kota 0-40 stopinj - velik rezervar hladilne tekočine 400l - velik pretok hladilne tekočine - samodejno mazanje stroja - brusna plošča premer 350mm - pregleden panel - zadnji podajalec žage - možnost brušenja od 3,8m do 16 metrov - samodejni prenos žage čez stroj - avtomatsko odpiranje/ zapiranje kabine - možnost levi ali desni stroj Cedpoytx Hnefx Ahxsgt

Stanje: rabljeno, Leto izdelave: 2001, številka stroja/vozila: 001048, This machine will be equipped with a new Siemens PLC and touch panel. Technical data: - Manufacturer: Unisanding - Model: 2.2.0. 0-30 - Working width: 1300 mm - Year of construction: 2001, retrofit in 2025 - 2 rollers, flexibly adjustable from 0–30°, operating from above - Flex-Trim special brushes - Vacuum conveyor belt with vacuum motor - With glass panel on the operator side - Sanding motors: 2 units, 2.2 kW each, with thermal contact - Feed motor: 1 unit, 1.5 kW, with thermal contact - Vacuum motor: 1 unit, 5.5 kW - Roller height adjustment axis: 1 unit, 0.18 kW - Feed rate: 2–10 m/min, frequency-controlled - Brush rotation speed: 50–350 rpm, frequency-controlled - Voltage: 3 x 400V, 50Hz - Electrical connected load: 15 kW - Fuse: 63A - Exhaust air volume (vacuum): 3,000 m³/h Cjdpfx Aoxtakmehxsgt - Dust extraction volume: 5,000 m³/h (provided by customer) - Length: 2,170 mm - Width: 2,040 mm - Height: 2,030 mm - Weight (including control cabinet): 2,220 kg - Colour: RAL 7035 light grey/black - Operator side: left/right - Brush change side: right - Ex version: No - Location: in stock Blomberg

Stanje: dober (rabljeno), Leto izdelave: 2012, številka stroja/vozila: 22002549, Ponudba 26118 Tehnični podatki: - Možno delovno območje z opcijami: 0,3 – 30 mm - Največji premer plošče: 164 mm - Vrhni kot brezstopenjsko nastavljiv: 118 – 150° - Hitrost na površini plošče: 29 m/s - Število obratov: 2800 obr/min - Pogon: 230 V / 0,2 kW - Potrebni prostor pribl.: Š 450 x V 300 x G 450 mm Csdpfx Ahey Dfqioxjgt - Teža pribl.: 30 kg - Vpenjalni razponi: 3,0 – 12 mm - Vpenjalni razponi: 12 – 21 mm - Brusilna naprava za 3-robne stožčaste rezkarje - Križna miza

Stanje: dober (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Tool sharpening machine with wet grinding. Technical data according to the photo. Comes with coolant pump and indexing device. Cgedsup U R Tepfx Ahxet

Leto izdelave: 1987, stanje: nepreverjeno (rabljeno), Automatic sharpening machine for metal and segment circular saws. Circular saw blade diameter from 80 to 710 mm. Cgjdpfxslmkpfo Ahxst Tooth pitch variable. Tooth height 1.2 – 14 mm. Infinitely adjustable working speed: 15 – 180 teeth/min. Wet grinding system, NC controlled.