Stiskalnica Za Predale / Stiskalnica Za Predale nakup rabljenega (93.490)

Stanje: rabljeno, Predalna stiskalnica ZVB/ZUB Hsdpfx Ajx Dkygjqtet Mere (ŠxVxG): pribl. 250x200x100 cm, s 3 stiskalnimi batmi, od tega 2 električno premični, krmilna omarica, upravljalni terminal, 1 naprava za nanašanje lepila KUPER, 1 vrtalni agregat,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 8.856 h, Funkcionalnost: popolnoma funkcionalen, delovna dolžina: 12.000 mm, Stiskalnica Obnovljena 12 m dolžine Vse brezhibno Hedexfg Sbepfx Aqtjt V delujočem stanju. Nahaja se na sedežu podjetja.

Stanje: zelo dobro (rabljeno), Hydraulic veneer press with medium heating plates Undercylinder design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display of the heating plates Pressing pressure steplessly adjustable via pressure switch Two-stage hydraulic pump Rack equalization Main switch Safety tear-off cable CE marked Pressing area: 2550 x 1350 mm Opening width: approx. 350 mm Hodpfsy Egkgjx Aqtjt Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3200 kg Note on used machines: • Technical data subject to change and prior sale. • Prices indicated are ex works – free loaded! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior, however, both the motor and the hydraulic pump are larger, and the electrical system is more advanced. General features: - Robust construction - Very easy to operate and economical in operation - Simple maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring Hsdpfjwyc H Tox Aqtet - Low oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Wiring diagram - CE marking - Operating manual Technical data: - Motor power: 7.5 kW, connection value 400 V, 50 Hz - Number of pressing cycles per minute: 14 - Capacity: 60 – 100 kg/h (depending on material) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Oil tank volume: approx. 180 litres - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Incl. approx. 2 m briquette discharge pipe Used machinery notice: • Subject to technical changes and prior sale. • Prices stated are ex-works, loaded free of charge at location! • The machine has been cleaned and function-tested. • All machines are sold as inspected without any warranty. Buyers are welcome to inspect the machine at our site. • Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Hedpfx Aqjfh Tmmetjt Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: dober (rabljeno), Leto izdelave: 1989, Pressing area: 2550 x 1350 mm Number of press cylinders: 6 Total pressing force: 140 t Opening width: approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load: approx. 26 kW Required space (L x W x H) approx.: 3400 x 1600 x 2000 mm Hedpfewd N Rmjx Aqtot Weight: approx. 5,500 kg Hydraulic Heated Platen Press Bottom-ram design Electric heating plates Pressing pressure steplessly adjustable via pressure switch Hydraulic pump Central control panel with all operating controls Digital temperature display for both heating plates Press cycle counter Safety rip cord Rack compensator Main switch Note for used machinery: • Subject to errors in technical specifications and prior sale. • Stated prices are ex-works prices – free loading included! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will be answered only if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Laminating Press MAWEG Machine frame inclined at 10° Single-side loading Horizontal beam height adjustable via hand crank (all clamping cylinders can be adjusted simultaneously) Hydraulic cylinders with quick clamping, stepless adjustment Manual hydraulic cylinder clamping Hydraulic cylinder pressing force approx. 2000 kp Hydraulic cylinder stroke 100 mm Clamping depth 100 mm Max. clamping length 2800 mm Max. clamping height 1800 mm 4 pcs. vertical press cylinders 2 pcs. horizontal press cylinders 6 pcs. counter stops Note for used machinery: • Subject to errors in technical details and prior sale. • Quoted prices are ex works, loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. The buyer is free to inspect the machines on site. Hjdpoyyn E Uefx Aqtjt • Special agreements are only possible in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, OTT model JU 2513 Hidravlična furnirska stiskalnica z elektro grelnimi ploščami Hodpfsxgpaqjx Aqtet Izvedba s podbatnicami BUSSE elektro grelne plošče Centralna nadzorna plošča z vsemi upravljalnimi elementi Analogni prikaz temperature za obe grelni plošči Pritisk stiskanja brezstopenjsko nastavljiv s tlačnim stikalom Glavno stikalo dvostopenjska hidravlična črpalka z avtomatskim preklopnim ventilom iz nizkega v visok tlak Varnostna vlečna vrvica Izravnava z zobato letvijo Omejevanje hoda CE Stisna površina: 2500 x 1300 mm Število stiskalnih valjev: 4 Skupna stiskalna sila: 70 t Obratovalna napetost: 3 x 400 V + N, 50 Hz. Skupna priključna moč: pribl. 20,3 kW Potreben prostor (D x Š x V) pribl.: 2900 x 1250 x 1900 mm Teža: pribl. 3200 kg

Stanje: rabljeno, Leto izdelave: 2006, Programabilna avtomatska stiskalnica za manjše pohištvo ali pohištvene komponente, znamka Vettorel Silverio, model STV FC. Leto izdelave 2006, oznaka CE. Rabljeno. Hodpfx Aozcpydjqtst

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1997, številka stroja/vozila: 9730010, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 340 mm, premer stranskega valja: 300 mm, najv. debelina pločevine: 20 mm, najv. debelina jeklene pločevine: 25 mm, maks. debelina pločevine iz nerjavečega jekla: 20 mm, maks. debelina aluminijaste pločevine: 25 mm, maks. debelina medeninaste pločevine: 25 mm, najv. debelina bakrene pločevine: 25 mm, skupna masa: 9.000 kg, skupna dolžina: 5.500 mm, skupna širina: 1.600 mm, skupna višina: 1.500 mm, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 2, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, Hidravlični stroj za upogibanje pločevin s tremi valji in funkcijo predhodnega upogiba Model MCO3034, proizvajalec Davi, zmogljivost 3000 x 20 mm - Širina pločevine 3000 mm - Zmogljivost upogibanja 20 mm - Predhodni upogib 16 mm ----- TEHNIČNI PODATKI Zgornji valj: 340 mm Površina valjev: 3050 mm Hsdpfx Aszwuu Ujqtot MINIMALNI PREMER UPOGIBA: ID 430 MM odvisno od debeline pločevine in meje tečenja pločevine KONFIGURACIJA: - Valji, kaljeni z visokotrdnostno površino - Hidravlični nastavek za upogibanje stožčastih pločevin - Digitalni prikazovalnik položaja 2x stranska opora za pločevino, leva in desna stran, hidravlična (glej fotografijo) - 3 valji, pogonjeni s hidravlično energijo, z ločenim motorjem in reduktorjem na vsakem valju - Vzporednost med zgornjim in spodnjim valjem s torzijsko palico - Valji nameščeni na ležajih - Zaščita valjev pred preobremenitvijo s hidravlično zaščito - Sinhronizirano hidravlično vrtenje valjev - Hidravlična enota, vgrajena v stroj - Neskončno spremenljiva regulacija hitrosti s hidravličnim razdelilnikom - Centralna nadzorna plošča, pritrjena na sprednji strani, leva in desna, z možnostjo nagiba - Sistem za izredno zaustavitev in varnostno zaustavitev - Navodila, original

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, premer briketa: 100 mm, Oprema: hladilna enota, nujno zaustavitev, Briketirna naprava Di Più MB100 – leto izdelave 2009 – kompletna naprava s pilami in dodatno opremo (pregledana in popravljena leta 2026!) Briketirna naprava Pawert SPM I-90/200 – pregledana in popravljena leta 2025 (kot nova!) Za prodajo so briketirne naprave tipa Di Più MB100, leto izdelave 2009 (pregledane in popravljene leta 2025/26), vključno s pilami, transportnimi napravami in dodatno opremo. Naprave so bile uporabljene v industrijski proizvodnji in so idealne za proizvodnjo lesnih briketov iz žagovine, lesnih sekancev in ostankov lesa. ⸻ Tehnični podatki (na napravo): Tip: Di Più BRIK MB100 Leto izdelave: 2009 Premer briketov: pribl. 90 – 110 mm Produkcijska zmogljivost: pribl. 1.300 – 2.300 kg/h Pritisni tlak: pribl. 2.000 – 2.500 kg/cm² Glavni motor: 75 kW Skupna moč: pribl. 98 kW Vlažnost materiala: optimalno 8 – 12 % Velikost zrn: pribl. 1 – 12 mm Teža: pribl. 7.800 kg na napravo Pogon: hidravlična batna preša ⸻ Oprema: Posoda za material Transportni vijak Hidravlični sistem Električne omarice Pile za rezanje briketov na dolžino Zaščitne obloge in varnostni sistemi Enote za izpust ⸻ Obseg dobave: 3 kompletne briketirne naprave Di Più MB100 Pile Transportne naprave in dodatna oprema Rezervni deli po dogovoru ⸻ Področja uporabe: Žage Predelava lesa Obrati za biomaso Proizvodnja briketov za energijo in prodajo Lokacija: na zahtevo Hjdpjzw T Dzjfx Aqtot Transport: organizacija po dogovoru Cena: na zahtevo Možna je prodaja posameznih naprav ali celotnega paketa

Stanje: rabljeno, Leto izdelave: 1992, Mere: 5700 x 1300 x 2400 mm Hsdpfx Aovvkl Djqtjt Skladišče: Nattheim

Stanje: dober (rabljeno), Dobro, rabljeno stanje. Glavni motor: 11 kW Pretok do največ 200 kg/h Hedpfot Hxudsx Aqtst Letnik: 12/2008 Briket: 150x60 mm *Rabljena naprava, prodana v trenutnem stanju. Garancija za delovanje ob prevzemu.

Stanje: dober (rabljeno), Leto izdelave: 2001, Dobro ohranjeno, rabljeno stanje. Število delovnih ur: 1.675 ur. Hjdpfx Aqewcc D Rstot Motor: 11 kW Tlak: nastavljiv do maksimalno 250 barov. Pretok: do maksimalno 200 kg/h. Briket: 150 x 60 mm. Dimenzije stiskalnice: približno 2200 x 3000 x 1920 mm (D x Š x V). Dimenzije nadzorne omarice: 500 x 1250 x 2120 mm (D x Š x V). Teža: približno 3000 kg.

Stanje: kot nova (razstavni stroj), Ta stiskalnica za pelete, namenjena izdelavi lesnih pelet, bo v naši industrijski dražbi/dražbi strojev, ki je del akcije razprodaje zalog, prodaje posameznih/razstavnih kosov, ponujena v spletni dražbi. Hedpozv Runjfx Aqtjt To in številne druge artikle najdete na naši platformi.

Stanje: rabljeno, Leto izdelave: 2000, Skupna sila stiskanja: 250 t Hidravlična sila obodnih zob (spodnja plošča): 30 – 125 t Hidravlična nasprotna sila (zgornja plošča): 30 – 125 t Hedpfx Aqjzwfqastot Hod batnice: 64 – 67 mm Ploščina za pritrditev na ploščo: pribl. 560 x 600 mm Ploščina za pritrditev batnice: pribl. 560 x 560 Število hodov: 80 min⁻¹ Masa stroja: pribl. 14.000 kg Standardna oprema Maksimalna debelina materiala: 10 mm Dodatna oprema vključno z napravo za podajanje valjev in škarami za ločevanje odpadkov Avtomatizacija Naprava za ravnanje, model RLM 25-S, širina materiala 50 – 250 mm, debelina materiala 6 – 10 mm, število valjev za ravnanje 5, premer valjev za ravnanje 88 mm Naprava za navijanje USM 2000 AS, teža tuljave 2 t, zunanji premer tuljave pribl. 1500 mm, notranji premer tuljave pribl. 508 mm, širina materiala 50 – 250 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Brianzola Simcor – stroj za vtiskovanje vzorcev Delovna širina 400 mm Dve hitrosti premikanja 1,5/3 m/min 9 glav za vtiskovanje Hodpszwc Aaofx Aqtjt Tehnična dokumentacija

Stanje: rabljeno, Leto izdelave: 1982, Tlak 40 t Razdalja med stojali 695 oz. 215 mm Hjdpfx Aotqqq Rjqtst Hod 100 mm Površina za namestitev na mizo 650 x 440 mm Površina batnice 580 x 285 mm Vgradna višina 400 mm Skupna potrebna moč 15 kW Dimenzije stroja (dolžina x širina x višina) 1,63 x 1,05 x 2,61 m - z vlečnim blazinom - z optično pregrado SICK

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, širina mize: 1.030 mm, skupna dolžina: 2.400 mm, skupna širina: 1.800 mm, skupna višina: 2.100 mm, skupna masa: 700 kg, C-S Supervariomat s 3 stransko pomičnimi rokami Pralna preša za masivno leseno ploščo 5 pritrdilnih rok 4 nadstropja Hedpfx Aqozvmf Netot Globina pritiska 103 cm, dolžina ~ 240 cm Namenska površina 180 x 240 cm TAKOJ PODEJANSKO

Stanje: rabljeno, Stisne mere: ca. 2500 x 1200 x 600 mm, polhidravlično, elektromotorno nastavljanje stisne stene Lokacija skladiščenja: Nattheim Hedpfx Aqszd Hm Njtjt

Stanje: rabljeno, Leto izdelave: 2013, Rabljena mašina Godina proizvodnje: 2013 Oprema i tehnički podaci: - pregledni upravljački elementi - idealna radna visina - veliki otvor Hodpfx Aezv Umboqtet - potpuni prolaz sa četiri strane - upravljanje putem tastera - taster za zaustavljanje - sigurnosno uže – hitno isključivanje (NOT-AUS) na svakoj poziciji - tajmer sa akustičkim signalom - kontrola pritiska automatska - automatska regulacija temperature - beskonačno podešavanje ograničenja podizanja - težak zupčasti balans - štedni režim standardno - bočni cilindri se mogu isključiti - ukupna sila pritiska: 120 t - dimenzije ploče: 3000x1350 mm - broj cilindara: 6 - prečnik klipa: 85 mm - maksimalno otvaranje/podizanje: 400 mm - vreme zatvaranja: oko 16 sekundi - vreme zagrevanja na 80°C (od sobne temperature): oko 14 minuta - maksimalna dozvoljena radna temperatura: 140°C - ukupna priključna snaga: 20,1 kW - hidraulička snaga: 1,21 kW - osigurač: 35 A - dimenzije: 3500x1610x2000 mm - ukupna težina: 6200 kg Dostupnost: odmah Lokacija: 63934 Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Prodajam prešo za lepljenje lameliranega lesa LISY DVORAK TH6, letnik 2008. Dimenzije materiala: 3000 x 1250 x 50 mm. 6 delovnih površin, ročna rotacija. 6 hidravličnih pritiskov na površino / črpalka 1,1 kW. 6 ročnih pritiskov na površino. Lastna teža: 1200 kg. V odličnem stanju. Na voljo takoj. Hjdpfekd Drhox Aqtjt

Stanje: rabljeno, Stroj za oblikovanje knjižnih blokov / Stroj za preoblikovanje knjižnih blokov Kolbus FE Spletni video pregled prek WhatsApp – MS Zoom – Telegram. Hjdpfx Aozu Dnleqtjt Na zalogi, Emskirchen/Nürnberg – na voljo takoj – možno testiranje.

Stanje: kot nova (razstavni stroj), Pretok do največ 50 kilogramov na uro. Hedpfx Aqszu Sknstot Premer briket: 50 mm. Glavni motor: 4 kW. Zelo kompaktna konstrukcija. Dimenzije: 1.100 x 1.500 x 1.200 mm. Teža: 570 kg.

Leto izdelave: 2025, stanje: novo, New machine Year of manufacture: 2025 Features and technical data: Complete in standard specification with: Sturdy, torsion-resistant steel frame in welded and bolted construction Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements Lamella pressure beams with proven tolerance compensation (Ganner system) for tightly pressed carcass joints Counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick, coated support panels Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance travelling nuts with grease reservoir Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW) The pressing force of the pressure beams is infinitely variable, set electronically via two potentiometers and controlled by frequency converters; therefore, the pressing force regulation is absolutely wear-free Pressing force for the horizontal pressure beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Hsdpfx Aew Nafksqtst Pressing force for the vertical pressure beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning via 3-position selector switch: 5 / 10 / 25 mm/sec Jog mode for precise positioning of both pressure beams, e.g. for low pressing force, drawers, and 45° carcasses Simple operation via 6 separate push buttons; 8 movement sequences selectable via control panel Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both pressure beams Re-press function to increase or decrease the pressing force during the pressing cycle Working height/loading height: 300 mm Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Incl. surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be switched off for pressing of special components Incl. set of machine feet for working height 500 mm Location: Flörsheim Availability: Immediate