Stiskalnica Za Briketiranje Lesnih Briketov nakup rabljenega (82.827)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, obratovalne ure: 21.000 h, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2024, vrsta zaščite (IP koda): IP54, Stiskalnica za brikete RUF 400 CELOVITA LINIJA ZA BRIKETIRANJE NA VOLJO ZA NAKUP: Bobnasti sušilec za žagovino Cgedpexu Ryusfx Aqcsu Vijak za podajanje Tračni transporter – 2 kosa Separator s lijakom Polžasti transporter – 6 kosov Skladiščni zalogovnik za mokre žagovine Zalogovnik za gorivo Kotlovnica na lesne odpadke Drogalnik lesnih odpadkov Izvlečni ventilator s ciklonom Pakirni stroj s kompresorjem Dodatne fotografije in informacije so na voljo ob resnem povpraševanju.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior, however, both the motor and the hydraulic pump are larger, and the electrical system is more advanced. General features: - Robust construction - Very easy to operate and economical in operation - Simple maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Low oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Wiring diagram - CE marking - Operating manual Technical data: - Motor power: 7.5 kW, connection value 400 V, 50 Hz Cgsdpfx Aqewyc H Tjcju - Number of pressing cycles per minute: 14 - Capacity: 60 – 100 kg/h (depending on material) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Oil tank volume: approx. 180 litres - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Incl. approx. 2 m briquette discharge pipe Used machinery notice: • Subject to technical changes and prior sale. • Prices stated are ex-works, loaded free of charge at location! • The machine has been cleaned and function-tested. • All machines are sold as inspected without any warranty. Buyers are welcome to inspect the machine at our site. • Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Cedod Nm Sijpfx Aqcogu Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Cedpjgl Nlmefx Aqcogu Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Cgedov Rpxlopfx Aqcju Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider Cjdpfsxfwdex Aqcsgu CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: dober (rabljeno), Good, used condition Main motor: 11 kW Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / Technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Functionality guaranteed upon handover Cedpfxjt Hxuds Aqcjgu

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length Cgsdefci D Ajpfx Aqcju • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Cedpfx Aqjgfm Ryscjgu Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke Izjemno visok pritisk stiskanja: 3.700 kg/cm² Velik lijak: 600 x 1500 mm Format briketa: 60 x 40 mm Zmogljivost: Aluminijevi ostružki – do 70 kg/h Cgodpfxew Ig Suj Aqcju Jekleni ostružki – do 180 kg/h Medeninski ostružki – do 220 kg/h *odvisno od vhodnega materiala in nastavitev Vključeno: - Kad za emulzijo - Črpalka za emulzijo - Oljni hladilnik

Stanje: dober (rabljeno), Tehnični podatki: Briketirni stroj v dobrem stanju Letnik: 2007 Tehnični pregled v 06/2025 Cilindrična briketa 80 mm Pretok do največ 150 kg/h *le približno 3.949 delovnih ur - Hidravlična preša: briketirni stroj z izmetno stezo - Hidravlična enota: 4 kW - Tlak: maks. 300 bar - Transportne dimenzije: 1585/2140/H1940 mm Cgedswtdk Tepfx Aqceu - Teža: 1370 kg Garancija delovanja ob prevzemu Z veseljem omogočamo brezplačen preizkus!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Cjdpod Nnwlsfx Aqcjgu Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 29 h, Another machine available immediately, ex works Neckartailfingen Cjdpfxjfhql To Aqcegu *Subject to prior sale *Round silo available at additional cost Press only deliverable with an additional plant component, such as chipper, granulator, hammer mill, screw conveyor, belt conveyor with overbelt magnet, or extraction system RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Type Classic – throughput up to 425 kg/h *material dependent Options for an extra charge – plant engineering / mütek Systemtechnik: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary airlocks - Screw conveyors - Silos - Control system integration of all types - Semi-automatic packaging technology Your benefits: Key point: + Highly established, mature die-press thanks to 25 years of experience. The challenge and expertise are in the details, e.g. use of top-quality valves and cylinder seals. + Suitable for 24h operation + Long service life + Low maintenance costs + Compact design + High energy efficiency due to innovative hydraulics Technical data – Briquetting press: Throughput: up to 425 kg/h* *depending on the bulk density of your input material *based on a bulk density of 200 kg per cubic meter Exact information available after successful test with your material. If no test material is provided, we cannot guarantee briquette quality or throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Hydraulic main compressor Pressing pressure: up to approx. 1700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual control of all cylinders Control cabinet "dust protected" with PLC control and touch display Total power consumption of the briquetting press: approx. 33 kW Raw material requirements: - Moisture content (atro) must be min. 6% to max. 15% - Maximum chip size: 20 x 2 x 2 mm - Ambient temperature at installation: minimum +8° C - Material feed must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Stanje: dober (rabljeno), Refurbished used machine *Options at extra cost, see below with full 1-year warranty Delivery time approx. 16 weeks after order Technical specifications: Throughput capacity up to max. 1,200 kg/h, depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm Including 2 m press channel Main motor power: 45 kW Feed auger with geared motor: 2 x 2.2 kW Compactor auger: 2 x 5.5 kW Distributor auger: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operating states and load display for main drive and feed augers PLC control: Siemens S7/300 with operating hours counter in the control cabinet Machine has CE mark Automatic start/stop function Codpfxo E Dque Aqcsgu Dimensions: 3,100 x 860 x 1,800 mm (L x W x H) Weight: 4,500 kg Options: Silo for MAP series (only suitable for a MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and fill level sensor. €19,700 net plus VAT. -Temperature control unit for press tools To maintain temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Prewired – absolutely necessary for operation Including corresponding control €7,850 net -Guillotine for cutting briquettes to length Compressed air supply required on site €6,940 net plus VAT. -Transfer pipe / cooling section (nominal: 4 x 2 m) Per 2 meters €990 net Assembly / commissioning (nominal per press approx. 2–3 days on site) Charged according to actual effort and time, invoiced separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday/night hour: 50% surcharge Each Sunday/public holiday hour: 100% surcharge Daily allowance per technician: depending on country Per car/van and distance kilometer: €0.98/km Travel and accommodation will be invoiced on an actual cost basis or as a flat rate at the buyer’s expense. Material testing with customer-provided material (by arrangement, up to max. 750 kg) – €1,970 net flat rate ---- Raw material requirements: - Moisture content (atro) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Ambient temperature: heated room with at least +5°C - Material must be free of metals and mineral contaminants. Damage to press tools and/or increased wear may otherwise occur.

Stanje: dober (rabljeno), Leto izdelave: 2001, Dobre ohranjeno, rabljeno stanje Malo delovnih ur (1675 h) Motor: 11 kW Tlak: nastavljiv do največ 250 barov Pretok do največ 220 kg/h Cgsdpfx Aqewcc D Rocou Briket: 150x60 mm Dimenzije stiskalnice: pribl. 2200x3000x1920 mm (D x Š x V) Dimenzije krmilne omare: 500x1250x2120 mm (D x Š x V) Teža pribl. 3000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, skupna masa: 500 kg, moč: 3 kW (4,08 KM), PLC control system with touch panel Briquetting capacity 80 - 100 kg/h Feed screw diameter 130 mm Cgodpfxowhv Imj Aqcsu Connection diameter (internal) 160 mm Briquette diameter 60 mm

Stanje: novo, Leto izdelave: 2025, Performance: 10 - 25 kg/h Briquette size: 30 mm x 30 mm cube Hopper capacity: 0.33 m³ Dimensions: 1300 mm x 740 mm x 1200 mm (L x W x H) Power consumption: 2.2 kW Machine length: 1300 mm Machine width: 740 mm Machine height: 1120 mm Codpfxek Utqvo Aqcogu Weight: 233 kg

Stanje: novo, Leto izdelave: 2025, Output: 40 - 100 kg/h Briquette diameter: 60 mm Briquette length: 40 - 70 mm Automatic start: yes Cedpfx Ajknyhpeqcjgu Oil preheating system: yes Max. material moisture: 15% Container diameter: 1000 mm Dimensions: 1850 mm x 1170 mm x 1510 mm (LxWxH) Motor power: 7.5 kW Control cabinet: with Siemens PLC and touch screen Weight: 770 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Felder Clean Air Extraction Unit | Dust Extraction System RL 200 | Ø 200 mm Maximum air flow: 4000 m³/h Rated air flow: 20 m/sec, 2300 m³/h Negative pressure: 2380 Pa Filter surface area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput capacity: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil volume: 125 litres Year of manufacture: 2016 Condition: ready for operation Price: 15,500.- The system has already been dismantled and is stored at the Raasdorf warehouse. Codpfowa Rlksx Aqcogu

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer briketa: 50 mm, skupna masa: 340 kg, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, kapaciteta rezervoarja za olje: 60 l, stiskalna sila: 8 t, obratovalni tlak: 270 letvica, Oprema: hladilna enota, Hidravlična briketirna stiskalnica z glavnim motorjem 4 kW. Briket premera 50 mm. Kapaciteta: 30-50 kg/uro. 50-litrski rezervoar, oljni hladilnik. Cjdpfsf Hmi Ejx Aqcjgu

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Premer briketa: 40 mm Priključna moč: 4 kW Cgjdpevptrtofx Aqceu Tlačna zmogljivost/kapaciteta na uro: odvisno od materiala Velikost posode: 1.044 x 1.044 mm Krmiljenje SPS Velikost hidravličnega rezervoarja: 100 l Nova razstavna naprava z 5 delovnimi urami

Stanje: novo, Leto izdelave: 2023, Output capacity: 15 - 70 kg/h Briquette diameter: 60 mm Cgodpfx Aqok Utq Docju Automatic start: Yes Oil preheating system: Yes Material moisture: max 15% Container size: octagonal, diameter 750 mm Hopper height: Dimensions: 1500 mm x 900 mm x 1065 mm (L x W x H) Motor power: 5.5 kW Control cabinet: electronically controlled via PLC Weight: 450 kg

Stanje: novo, Leto izdelave: 2025, Performance: 40 and 60 kg/h Automatic Start: Yes Oil Cooler: Yes Cgedpfx Aqjwhuuleceu Briquette Size: 50 mm diameter Briquette Length: 35 mm Hopper Capacity: 0.38 m³ Power Consumption: 5.5 kW Machine Length: 1860 mm Machine Width: 890 mm Machine Height: 1100 mm Weight: 400 kg

Stanje: novo, Leto izdelave: 2025, Performance: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Hopper capacity: 0.38 m³ Power consumption: 4 kW Machine length: 1,860 mm Cedopfatpepfx Aqcjgu Machine width: 890 mm Machine height: 1,100 mm Weight: 400 kg

Stanje: novo, Leto izdelave: 2023, Output: 15 - 55 kg/h Briquette diameter: 55 mm Container size: octagonal, diameter 750 mm Csdek Utqyopfx Aqcsgu Hopper height: Dimensions: 1500 mm x 900 mm x 1065 mm (L x W x H) Motor power: 4 kW Control cabinet: electronically controlled via PLC Weight: 450 kg