Stetson Ross 6-12C-1 nakup rabljenega (97.808)

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.000 mm, skupna višina: 1.800 mm, skupna dolžina: 5.500 mm, skupna masa: 6.500 kg, vrsta vhodnega toka: trifazni, moč: 150 kW (203,94 KM), Stetson Ross 6-12-C1 skobelni/frezalni stroj Hnodpfx Aexvn Tbjg Aou Naprodaj zanesljive lesnoobdelovalne Stetson Ross 6-12-C1 skobelne/frezalne naprave. Močna industrijska konstrukcija, primerna za intenzivno uporabo. Odlično za skobljanje, profiliranje in obdelavo desk, hlodov ter površin v velikih količinah. Stroj deluje brezhibno, tehnično vzdrževan, pripravljen za takojšnjo uporabo. Povzetek opreme: Model: Stetson Ross 6-12-C1 Namen: skobljanje/profiliranje lesa Trdna industrijska zasnova Nemoteno delovanje in visoka kakovost obdelave

Stanje: rabljeno, Leto izdelave: 2013, Dimenzije premera steklenice: 57, 71, 76, 94, 115 mm. Hjdjz Sdrfepfx Ag Ajnu

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 962157, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 230 V, skupna masa: 3.500 kg, najv. debelina jeklene pločevine: 150 mm, delovna dolžina: 6.000 mm, vrsta zaščite (IP koda): IP21, hitrost rezanja: 12.000 mm/min, dolžina mize: 6.000 mm, širina mize: 2.000 mm, delovna širina: 2.000 mm, Ponujamo rabljeni stroj za rezanje s plazmo in plamenski razrez Varstroj VARCUT 3,2 L2/Ph - 2,5x6,0/1(PL+G) Serijska številka: 962157 Priključna napetost: ~230 V Frekvenca: 50 Hz Priključna moč: max. 2,0 kVA Največja hitrost rezanja: 12000 mm/min Vodenje: CNC Število gorilnikov: 1+1 Hodjz D Tq Eepfx Ag Ajnu Debelina rezanja plamensko 150 mm Delovna širina: 2000 mm Delovna dolžina: 6000 mm Plin za rezanje: Propan butan, zrak Mehanska zaščita: IP 21 Skupna masa: ca 3500 kg Leto izdelave: 2008 Plazma TRC-121 OTC Daihen D-12000 30-120A Rezanje do 25mm debeline s plazmo Če imate dodatna vprašanja ali potrebujete več informacij, nam prosim pošljite sporočilo ali nas pokličite.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Znamka: BWF, tip: SI 6/1 AS-N X710, serijska št.: 1114, krmiljenje, znamka Siemens, tip 840 Dsl, obdelava Ø 40-400 mm, globina obdelave 710 mm, obdelovanec Ø 500-600 mm, največja dolžina obdelovanca 1.000 mm, glava WSTK z nastavljivim naklonom -5/+30, tračni filtrirni sistem, filter za oljno meglo, znamka Unifil, nadgradnja 2011. Hnodpeyfii Dsfx Ag Asu

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 1.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 142400, Zmogljiv in zanesljiv stroj za industrijsko obdelavo furnirja. Robustna konstrukcija, natančno delovanje in ustrezna rešitev za obrate z poudarkom na učinkovitosti in stabilni zmogljivosti. Model CrossRunner 1600/2500 ponuja delovno širino 1600 mm in dolžino 2500 mm. Primeren za profesionalno proizvodnjo in vsakodnevno uporabo. Hnsdpezg Dl Ujfx Ag Aju

Stanje: dober (rabljeno), Leto izdelave: 1986, Globina brušenja 500 mm Notranji premer 20... 400 mm Hnodpfx Aez Rn R Ujg Asu Število vrtljajev vretena za obdelovanec 40....400 vrt/min Hitrost mize 0,1....8 m/min Hitra premika 10 m/min Skupna potrebna moč 17 kW Masa stroja približno 6,5 t Dodatne informacije premer, ki ga je mogoče obdelati v zaščiti obdelovanca: notranji / internal 20..400 mm; zunanji 500 mm maks. premer obdelovanca v zaščiti obdelovanca: 500 mm maks. globina brušenja: 315 mm kot stožca, ki ga je mogoče obdelati: 60 ° število vrtljajev vretena za notranje brušenje: 2640...16500 vrt/min moč pogona za brusilno glavo: 4 kW moč pogona motorja za obdelovanec: 1,5 kW število vrtljajev vretena za obdelovanec: 40...400 vrt/min hitrost mize: 0,1...8 m/min hitra premika: 10 m/min pot mize: 630 mm maks. razdalja od prijemne plošče vretena za obdelovanec do nosilca brusilnega vretena: 1250 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, moč: 18,5 kW (25,15 KM), Rotor 260 mm Vhodna odprtina cca 630 x 830 mm Dolžina rotorja cca 630 mm Motor: 18,5 kW Število nožev: 30 Sito prisotno Prenova: - nov motor vključno z montažo - nove drsne letve za potisnik - merjenje potisnika - novi noži - novi proti-noži - popolnoma nov rotor - hidravlični sistem preverjen / obrabljeni deli zamenjani - nov prirobnični ležaj UCF 214 Hsdpeyfw D Nofx Ag Aonu - novo barvanje - nastavitev / preizkus delovanja

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! First Warranty Inspection Completely Free: This special offer is available only to customers who have attended a demonstration prior to purchase – at the Otinus machine showroom in Bydgoszcz. Some of our machines are AVAILABLE FROM STOCK. Hydraulic Press Brake “PBO-3112-PRO DA-69T” Technical Specifications: - Nominal Press Force: 1,200 kN - Motor Power: 11 kW - Approach Speed: 160 mm/s - Bending Speed: 10 mm/s - Return Speed: 130 mm/s - Weight: 8,400 kg - Oil Tank Capacity: 140 l - Maximum Bending Length: 3,100 mm - Distance Between Uprights: 2,550 mm - Beam Width: 1,590 mm - Table Height: 880 mm - Maximum Opening Height: 540 mm - Maximum Stroke of Moving Beam: 260 mm - Table Width: 60 mm - Throat Depth: 410 mm Tooling: - 2 automatic servo-driven back gauges on linear guides - 2 front sheet supports - Back gauge distance adjustment (X-axis): electric motor - Beam adjustment (Y-axis): independent control of axes Y1 and Y2 via servo drive - Punch clamping type: quick-change AMADA-style Hsdpfxevwmh Do Ag Aenu Controller “Delem DA-66T” - Graphical programming module with 2D and 3D touch screen interface - 3D visualization for simulation and processing - High-resolution 17” TFT color display - Full Windows-based operating system - Compatibility with “Delem Modusys” (modular scalability and adaptability) - External USB port - Comprehensive user support in a multitasking environment - Bending with use of sensors, including menu for parameter corrections - Offline software Profile-T3D High-Quality Components: - German brand Rexroth hydraulic valve - Electrical system components by Schneider - Safety circuit elements by Omron and Schneider Safety: The machine is delivered with carefully prepared documentation in German. The unit comes with a CE Declaration of Conformity. Financing: For customers interested in financing Otinus machines, we offer assistance in sourcing financing solutions. We also invite you to take advantage of our consulting services. We cooperate with various banks to find the best leasing, loan, or credit offer suited to your needs. The following services are included in the machine price: A 2-day training session and machine installation: - Day one, up to 8 hours: installation and training on the controller. - Day two, up to 8 hours: independent operation of the machine under the supervision of our technician → option to program specific parts as required by the customer. Telephone consultation with an Otinus specialist From 7:30 am to 9:00 pm (Mon–Sat) – 8-hour support package (to be used within 12 months) Terms of Cooperation: - 24-month warranty period. - Preparation and lead time: approx. 6–8 weeks. Not applicable if the machine is marked "available from stock". - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The customer assumes responsibility for the equipment once it has been unloaded and transported on the customer’s premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, TEHNIČNE PODROBNOSTI Splošni podatki Proizvajalec: Baykal Vrsta stroja: hidravlične ploščne škarje Tip: HNC 8100/6 Delovni obseg Delovna širina: 8.100 mm Debelina pločevine: maks. 6 mm OPREMA Motoriziran zadnji omejevalnik Samodejna nastavitev razmika reza Samodejna nastavitev kota Hedpfx Asz R Dwkeg Ajnu Naprava za držanje pločevine

Stanje: zelo dobro (rabljeno), Manual control unit for Mitutoyo machines with CMMC 1, 1S, 2, 2S, 3, 3S, 6 and UC200/400 Hnodpfx Agjgynw Do Aeu

Stanje: rabljeno, Leto izdelave: 1992, številka stroja/vozila: 920544, Power output: 100 kVA Throat depth: 280 mm Rated power at 50% duty cycle: 100 kVA Pressing force: 1.1 t Stroke: 100 mm Table size: 180 x 170 mm Control unit: MPS-29-K-S-R Total power requirement: 279 kW Approx. machine weight: 1.3 t Hnedpfx Agocxxwnj Aeu Approx. space requirement: 1.4 x 1.15 x 2.1 m Spot welding machine with Nimak microprocessor control unit type MPS-32-K, water-cooled, Sick opto-electronic safety light barrier, emergency stop safety switch.

Stanje: pripravljen za uporabo (rabljen), Stroj v dobrem delovnem stanju Hodpfjy Rnnqox Ag Aenu

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Single Temperiertechnik STW 1-6-30-M4 regulator temperature. Na voljo 4 kosi. Cena: 300 EUR na kos. V dobrem delovnem stanju. Oglejte si tudi naše druge oglase. Hjdpfx Agowf Anho Ajnu

Leto izdelave: 2007, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Na voljo sta dve napravi za uravnavanje temperature proizvajalca Plasma/Single; naprava se prodaja po akcijski ceni, cena je navedena za en kos!! Hnsdpfxezul N Rj Ag Asu Medij: olje Najvišja delovna temperatura: 180 °C Moč gretja: 6 kW Moč hlajenja: 14 kW Hladilni ventilator je nameščen na zunanji strani... PT 100 senzor Vmesnik 0–20 mA

Stanje: rabljeno, Leto izdelave: 1998, Stanje: rabljeno Letnik: 1998 Številka zaloge: 090148 Dobavni rok: takoj, ob morebitni predhodni prodaji Država izvora: Belgija Cena: 22.800 € Na zalogi: 1 Dolžina reza: 3100 mm Maksimalna debelina pločevine – gradbena jekla: 6 mm Kot reza: 0,5 – 3,5 ° Moč motorja: 9,5 kW Višina mize: 950 mm Dolžina: 4070 mm Širina: 2330 mm Skupna širina z opornim rokom in zadnjo zaščitno mrežo: 3400 mm Višina: 1850 mm Teža: 5500 kg Motoriziran zadnji omejevalnik: 1000 mm, kroglični vijaki, digitalni prikazovalnik Nastavitev rezne širine spredaj z ročnim kolesom Omejevalnik dolžine reza Nastavitev kota reza Zaščita proti nizki višini Zadnja zaščita z optičnim senzorjem Noga za upravljanje Mizne podlage s kroglicami 1 stranski omejevalnik: 1500 mm 2 oporni roki Navodila za uporabo v nemščini z izjavo o skladnosti CE NAROČILO RABLJENEGA STROJA JE ZADEVA ZAUPANJA – NAŠA OBOJESTRANSKA OBAVEZA Hnsdpsyackwsfx Ag Aju Ponujamo vam največjo varnost in popolno preglednost. • PRISTNE INFORMACIJE: Podrobne fotografije in videoposnetki o delovanju stroja v trenutnem stanju • TEST NA LICU MESTA: Preizkus stroja pri nas • DIGITALNA PREDSTAVITEV: Individualna predstavitev v živo prek video klica • NAKUP BREZ TVEGANJA: 14-dnevna garancija za vračilo Podrobnosti:

Stanje: rabljeno, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture: approx. 1984 Pressing force: 60 tons Throat depth: 160 mm Table size: 580 x 360 mm Slide area: Ø 270 mm Clamping pin bore: Ø 40 mm Distance between uprights: 218 mm Slide stroke: 60 mm Ejector stroke: 15 mm Slide adjustment: 30 mm Max. installation height: 300 mm (with intermediate table plate) Strokes per minute: 70 SPM Motor speed: 1400 rpm Motor power: 3 kW Power supply: 380 Volt, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Intermediate table plate L x W x H 580 x 360 x 58 mm, with holes and cut-outs - Mechanical ejector, ejector system in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety guard, UNIDOR safety enclosure with pneumatic front shield - Cam switchgear BALLUFF Space requirement L x W x H 1400 x 1200 x 1850 mm Weight: 3 tons Good condition Hnodpfxev Uraao Ag Aju

Leto izdelave: 2020, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Fabricant BRINOX Hnodpoyl H Htefx Ag Aou Désignation de la machine Installation CIP CS6720 Modèle LEP12 – Module CIP avec réservoir tampon isolé de 200 L Année de fabrication 2020 État Neuf, inutilisé, emballage d’origine, jamais installé, jamais mis en service Type d’installation Installation CIP modulaire (Cleaning in Place) sur cadre en acier inoxydable, entièrement prémontée. Composée d’un réservoir tampon CIP isolé, d’une pompe centrifuge, d’un échangeur de chaleur, d’un module de tuyauterie en acier inoxydable, de technologie de vannes, de technologie de mesure et de régulation ainsi que de raccordements pour les fluides. Dimensions du cadre env. 2330 x 1224 x 2127 mm Réservoir tampon Volume de travail 200 litres Volume total 278 litres Conception cylindrique avec fonds bombés selon DIN 28011 Pression de service -1 à +3 bar Pression d’épreuve 5,4 bar Température admissible -10 °C à +150 °C Température de fonctionnement 0 °C à +85 °C Groupe de fluides 1 Isolation : laine de verre à faible teneur en chlorures (

Stanje: rabljeno, Technical details: Plate length: 2000 mm Plate width: 1500 mm Plate height: 820 mm Plate thickness: 185 mm Machine weight approx.: approx. 2.1 / 2.2 t per plate Transport dimensions LxWxH: approx. 2.0 x 1.5 m / per plate A total of 6 of these clamping plates are available for sale. (Price per piece) Material: cast steel/profile cast T-slots according to DIN 650: a = 43 mm; h = 105 mm; b = 76 mm; c = 50 mm; center distance 375 mm Hjdpeu N D Rdofx Ag Aonu 4x through holes Ø 90 mm 10x mounting holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for plate no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for plate no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor water-cooled, 9.8 kW - Marposs tool measurement - Active longitudinal positioning - Kel-Set - GAP on T1 and T2 from ELASO, contactless, integrated into the control interface - GAP on T3/T4 via fluid sensor - Semi-automatic balancing by ELASO integrated into the control interface for T1/T2 - Hydraulic tailstock with fine adjustment +/- 150 μm - Dressing device on lower table, workpiece spindle side - Dressing device on lower table, tailstock side - Dressing device on upper table - New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle head with direct drive * Strongly recommended for non-circular grinding * Max. workpiece weight (chucked): 75 kg * Max. workpiece weight (between centers): 150 kg * Water-cooled * MK5 combined with short taper mounting DIN 55026 * Oriented spindle stop * Fixed base B-axis with direct drive, centre height 225 mm * Extremely torsion-resistant * High positioning accuracy * Resolution ° * Water-cooled MECHANICAL OVERHAUL: - Complete machine refurbished according to Kellenberger measurement protocol - Repainted New hydraulic power unit: - Improved temperature control (oil cooler) - Energy-saving: Only one pump, not running continuously! - Pressure monitoring - Monitoring of water content in hydrostatic oil (early detection of bellows damage) Hydrostatic ball screw drive in X-axis - Wear-free, as no contact during operation - No loss of accuracy, even during prolonged operation under full load at max. speed - Frictionless at low speeds - No reversal backlash when changing direction - Transmits minimal rotational movements - No stick-slip effect at low speeds - No fluctuations in friction torque due to ball circulation - Higher axial stiffness than ball screws - Significantly better damping, resulting in improved workpiece surface and tool life - No oscillations due to ball circulation - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor with higher accuracy and much lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling requirements than linear motors Electrical overhaul: - Brand new, modern CNC cylindrical grinding control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, BERUS pressure switches, etc. - New absolute linear scales in X and Z axes - New absolute encoder (for B-axis) Control: The grinding software consists of a basic license and various options that can be enabled depending on machine equipment. Basic software: - External and internal oscillation grinding Hnsdeuxfu Njpfx Ag Aju - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on the wheel) - Semi-automatic oscillation grinding - Workpiece...

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Machine description BRINOX Process Plant / CIP Skid Type CS6700 (CS6723) GMP CIP Process Skid 1.4435 Manufacturer BRINOX Process Systems Year of construction 2020 Technical Data Design as a stainless steel process skid in hygienic construction. Conductivity measurement 1–500 µS/cm, analog signal (AI), hygienic connection DN 50. Flow measurement 0–18,000 kg/h, analog signal (AI), connection DN 25, sterile flange DIN 11864-2A. Pressure measuring points −1 to 9 bar and −1 to 15 bar, analog signal (AI), hygienic connections DN 50 and ½", among others DIN EN ISO 228. Temperature measuring points −50 °C to +200 °C, analog signal (AI), connection DN 32, welded according to DIN 11866/A. Limit level sensors, digital (DI), hygienic connection DN 50. Multiple position feedbacks with IO-Link / digital. Pneumatically actuated on/off valves (DO) in stainless steel hygienic design. Product-contacting materials according to EN 1.4435 / 1.4404 (AISI 316L). Documented surface roughness of product-contacting surfaces in the range of Ra approx. 0.3–0.4 µm. Application Hygienic CIP and process skid for pharmaceutical and biotechnological applications. Suitable for cleaning process lines and vessels under GMP conditions. Construction Welded stainless steel skid with orbitally welded piping. Hygienic clamp and sterile connections. Fully instrumented with flow, pressure, temperature, and conductivity measurement. Pneumatic valve technology with digital feedback. Components from renowned manufacturers such as Endress+Hauser, Gemü, Samson, SICK, etc. Clean, GMP-compliant execution. Condition New. In original packaging. Unused. Never installed or put into operation. FAT / Documentation Status Hnedpfoyl H Svsx Ag Asu Fully documented Factory Acceptance Test performed. Layout drawing review documented. Maintenance and calibration accessibility check documented. Surface roughness inspection documented. Tightness test documented. Sensor calibration documented. Welding documentation fully checked. Complete documentation list FAT plan and FAT report. P&ID diagram. Layout drawings. Material lists for metals and polymers. Material certificates 3.1. WPQR, WPS, welder qualifications. Welding reports and isometric drawings. Calibration certificates for measuring instruments. Surface roughness measurement protocols. Tightness test protocols. EU declarations of conformity for installed components. Operating documentation. Special features GMP-compliant, fully documented manufacturing. High-quality instrumentation. Very low documented surface roughness values. Immediately available. Ideal for pharmaceutical, biotech, or contract manufacturers with high documentation requirements.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Machine designation Hnedpfxeyl H Tae Ag Aou BRINOX LEP 12 – CIP System Precipitation PRE LEP 12 CS6725 Package 5 Manufacturer BRINOX Prozess- und Edelstahltechnik GmbH, Offenburg Year of manufacture 2020 Serial number 1003614 Technical data Compact CIP skid unit in stainless steel frame construction. Product description: LEP 12 – CIP System Precipitation PRE. Approximate dimensions: 1520 x 970 x 1994 mm. Product-contact materials: Stainless steel 1.4435. Frame and structural components: Stainless steel 1.4301. Integrated shell-and-tube heat exchanger, make: NEUMO. Centrifugal pump in hygienic version. All pipework fully welded, pharmaceutical execution. Media lines insulated. Fittings include GEMÜ ball valves. Various integrated pressure gauges and measuring instruments. Calibrated pressure measurement system (Fluke pressure transducer, measuring range −1 to 20 bar, resolution 0.001 bar, accuracy 0.06% FS). Media connections: NaOH Acetic acid CIP supply CIP return Black steam Black steam condensate Neutralised wastewater Leak test performed with compressed air. Test pressure range approx. 3.19–3.24 bar. Maximum measured pressure drop < 0.015 bar within test duration. Result: passed. Application CIP cleaning system for pharmaceutical process plants, especially for precipitation tanks. Suitable for caustic and acid cleaning as well as steam connection. Designed for hygienic applications in pharmaceutical production. Construction Welded, compact skid design with robust stainless steel frame construction. Hygienic piping with defined media routing. Integrated shell-and-tube heat exchanger for CIP media temperature control. Integrated process pump, valve technology, and instrumentation on a compact frame. General tolerances in accordance with EN ISO 13920. Industrial-grade with crane lugs for transport. Condition New, unused, original packaging. The unit has only undergone FAT testing and has never been in production operation. FAT / Documentation status Complete Factory Acceptance Tests performed. Leak tests successfully passed. Calibration certificates available. Test protocols fully documented. Complete documentation included FAT documentation Leak test protocols Calibration certificates P&ID 3D drawings Material and weld documentation Nameplate and manufacturer documentation Special features Material selection suitable for pharmaceutical applications. Compact, ready-to-use skid unit. High-quality components from renowned manufacturers. Comprehensive technical documentation available. Immediately available.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, IZKORISTITE PRILOŽNOST – OMEJENA KOLIČINA! iCOMBI PRO 6-1/1 E – POSEBNA PONUDBA NOVO, V IZVIRNI EMBALAŽI + 1 LET GARANCIJE PROIZVAJALCA + 2 LETI GARANCIJE PRI MONTAŽI S STROKOVNJAKI IZ SERVISNEGA CENTRA RATIONAL PREJMETE NOVO IZDELEK V IZVIRNI EMBALAŽI! iCombi Pro je najnovejši kombinirani parni pečatnik iz podjetja RATIONAL. Model iCombi Pro 10-1/1 električni s 10 vložki GN 1/1, nov, je enostaven za uporabo tudi za neusposobljeno osebje, saj brez dodatnega nadzora dosežete izjemno kakovost hrane. Izjemno hitro vmesno čiščenje in samočiščenje ohranjata vašo napravo vedno čisto. Prejeli boste račun z navedeno DDV. Na sliki prikazano podnožje ni vključeno v ponudbo, lahko pa ga po želji dodate. Na voljo takoj! NAŠA STORITEV ZA VAS: do 2 let garancije proizvajalca Kakovostni izdelki priznanih blagovnih znamk po ugodnih cenah Profesionalna popravila/pregledi in strokovno čiščenje preverjeno in popolnoma delujoče – ali vrnitev denarja Dostava ali osebni prevzem, izbira je vaša Strokovno svetovanje – pred in po nakupu Zagotavljanje navodil za uporabo, shem priključkov in rezervnih delov Preverjanje v skladu s standardom DGUV V3 Hjdpfxez Ha Tfe Ag Aenu iCombi Pro podjetja Rational je nov standard glede inteligence, učinkovitosti in prilagodljivosti. TEHNIČNI PODATKI: Š x G x V: 850 x 842 x 754 mm Priključek za napajanje: V: 400 / Hz: 50-60 / kW: 10,8 Teža: 99 kg Leto izdelave: 2026 Stanje: Novo, v originalni embalaži, popolnoma delujoče DRUGE INFORMACIJE: Temperaturni razpon: 30 °C do 300 °C samodejno zaznava trenutne pogoje v prostoru za peko prepoznava velikost, količino polnjenja in stanje izdelka ter na podlagi tega izračuna stopnjo zapečenosti se nauči, katere načine kuhanja uporabljate pogosto, in jih uporabi določa idealno pot kuhanja, da doseže želeni rezultat MyDisplay – uporabniško nastavljiv prikazovalnik Barvni zaslon TFT in na dotik občutljiv zaslon Priročnik za uporabo in navodila za upravljanje, dostopna na zaslonu naprave Sonda za merjenje notranje temperature z avtomatskim popravkom napak in pomočjo pri postavitvi Vrata, prezračevana z dvojno steklo, varčna z energijo LED osvelitev notranjosti vključno s prikazovalnikom porabe energije Regulacija vlage: natančno merjenje in nastavitev vlage Individualna programiranje najmanj 350 programov peke, do 12 korakov Možnost vlaženja v 3 stopnjah USB vmesnik Visoko zmogljiv generator svežega para z avtomatskim odstranjevanjem vodnega kamna 5 programirljivih hitrosti zraka Integriran, vzdrževalno nezahteven sistem za ločevanje maščob brez dodatnega filtra za maščobe Funkcija ohlajanja: hitro ohlajanje prostora za peko avtomatska prilagoditev lokaciji montaže (višina, klima itd.) Vrata naprave s prezračevalno trojno stekleno ploščo in vrtljivo notranjo ploščo Priključek za odtočne vode, v skladu s standardom SVGW Zaščita pred brizganjem in pršenjem vode IP X 5 Ločeni magnetni ventili za mehko in toplo vodo do +30 °C Avtomatski časovnik zagona z nastavitvijo datuma in časa Material notranjosti in zunanjosti iz nerjavečega jekla DIN 1.4301 Integriran WiFi modul DOSTAVA / SHIPPING: Dostava ali osebni prevzem po dogovoru Dostava po vsem svetu na zahtevo / Worldwide shipping on request Dostava na otoke ali v gorate kraje samo po dogovoru Pridržujemo si pravico do sprememb in napak Imate vprašanja, želite se pogovoriti ali si želite ogledati izdelek na kraju samem? Kontaktirajte nas med našimi delovnimi urami: ponedeljek-petek od 09:00 do 13:00 in od 14:00 do 17:00. Prodaja poteka izključno v skladu z n

Stanje: novo, Leto izdelave: 2025, Lesno podnožje za proizvodnjo drv Hnodpfsvrchisx Ag Asu Dolžina: 4–10 m Širina: 1,5–3 m 2, 3 ali 4 verižni transportni trakovi Križni valji sinhronizirani s cepilcem drv Nastavljiva višina Pogonski sistem hidravličen ali električni

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Manufacturer BRINOX Hnsdeyl H H Tjpfx Ag Aeu Model LEP 12 – CIP System Precipitation PRE LEP 12 CS6721 Package 3 Year of Manufacture 2020 Condition New, original packaging, unused. The system has only been tested at the factory as part of the FAT (Factory Acceptance Test). No commissioning, no production, no contact with process media in operation. Description Modular CIP process system for pharmaceutical applications in hygienic stainless steel design. Compact skid-mounted unit with fully integrated measurement, pump, and valve technology. Dimensions Approx. 1520 x 970 x 1994 mm Materials Product-contact parts: Stainless steel 1.4435 Frame/structure: 1.4301 Welds in accordance with EN ISO 13920 Equipment – Shell-and-tube heat exchanger – Hygienic centrifugal pump – Electromagnetic flowmeter – Conductivity measurement – Pressure transmitter – Temperature measurement points – Pneumatic seat and diaphragm valves – Stainless steel frame structure – CIP supply / CIP return – Media connections for NaOH, acetic acid, steam, condensate, wastewater Tests Complete FAT performed including: – Layout inspection – P&ID check – Maintenance and calibration accessibility check – Documentation check – Surface roughness measurement – Sensor calibration – Welding documentation check – Leak test with compressed air – passed Calibration certificates available. Material certificates 3.1 available. Complete welding documentation (WPS, WPQR, welder certificates, NDT records). CE-compliant design. Scope of delivery Complete pre-assembled process module including documentation. FAT records, welding reports, material certificates, and calibration certificates fully included.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Celotno prenovljen, skladiščna zaloga, garancija 12 mesecev, brez sušilnice s topili! -maks. temperatura 250 °C -skupna prostornina parne komore 20,5 m³ Hnjdpfxjttbf Uj Ag Asu -koristne mere (D x Š x V) 2300 x 2750 x 2200 mm -nadzorni sistem Jumo Imago 500 -ogrevalna moč 36 kW -maks. obremenitev vozička 6000 kg, električni pogon -električni dovodni in odvodni loputki Belimo -odvodni ventilator, nadzorovan preko frekvenčnega pretvornika -mere za postavitev (D x Š x V) 3000 x 3000 x 3125 mm, plus tir pred pečjo -lastna teža približno 3500 kg -samostoječa nadzorna omara -dokumentacija -električno preverjen in s trenutnim protokolom meritev DGUV Ogled v naši skladiščni hali po dogovoru. Peč z vozičkom, peč, peči, industrijska peč, peč z zračnim kroženjem, komorna peč, ogrevalna peč, sušilna peč, temperaturna peč, komorna peč, sušilna komora, kalilna peč, vozičkana peč, peč z vozičkom, peč s premikanjem, vozičkana peč