Sistem Za Ravnanje Z Roboti / Izbirniki nakup rabljenega (100.729)

Stanje: rabljeno, Leto izdelave: 2017, Appareil de manutention avec préhenseur A) Geiger Handling GmbH – Système : Geiger Handling MidiLiner 5.0 S – Année de fabrication du système de manutention : 2017 Ijdeyk E Eropfx Ab Asib – Système d’axes : axe linéaire X / Y (portique) B) – Robot : Yaskawa Motoman MYS450 – Année de fabrication du robot : 2016 – Charge utile du robot : 8 kg – Commande intégrée, pupitre d’apprentissage présent – Application : manutention de pièces / Pick & Place / alimentation en assemblage – État visuel : d’occasion, propre industriellement, déjà démonté Emplacement : Sud de l’Allemagne _____ Nos conditions générales de vente s’appliquent ; par ailleurs, le vendeur n’assume aucune responsabilité pour les erreurs d’écriture ou de transmission de données. L’aspect des articles proposés correspond à leur âge et aux photos présentées. La technique et l’usure des articles proposés sont conformes à leur âge. Les machines d’occasion sont vendues uniquement à des professionnels et sans garantie.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Puhalo za transport blaga iz sušilnika do drobilnika, skozi zračni separator in naprej do pakiranja Puhalo 7,5 + 11 kW s frekvenčnim pretvornikom, dodatno puhalo 7,5 kW na voljo opcijsko 3 celične zapornice po 0,55 kW Kovinski okvir za drobilni sistem, razstavljen za transport s tovornjakom Krmilna omara za drobilni in zračni separacijski sistem, vhodni tok 32 A Ijdpfx Abswqfxyj Aeib Sistem je razstavljen lastno sušenje zelišč se več ne izvaja - youtube short: Separacija, čiščenje zelišč, zračni separator za meto, žajbelj, meliso

Leto izdelave: 2003, stanje: rabljeno, Machine (additional): Stainless steel brewing vat Iiodpfx Ajvcqz Eeb Ajb Total capacity up to top edge of shell: 26,000 liters Diameter approx.: 3 m Shell height approx.: 2 m Material thickness: 3 mm unheated shell Width: 3.4 m Material: Stainless steel 1.4301 Base construction: on stainless steel tube supports, anchored to floor Features: External boiler, conical vapor hood (stainless steel, D = 3,200 mm), conical insulation hood (stainless steel outer diameter = 3,400 mm), 2 outlets DN200 and DN100, manhole DN600, vapor pipe (12,000 mm), internal lighting

Stanje: rabljeno, Coil Processing Line – Decoiler and Straightening Machine Year of Manufacture: 1991 Strip Width: 50 to 450 mm Sheet Thickness with Straightener Disengaged: 6 mm Sheet Thickness with Straightener Engaged: 2 mm - Excellent equipment and feeding aids Required floor space (L x W): approx. 7,000 x 3,000 mm Total weight: approx. 11 tons Condition: Good Straightening Machine, HMS Type RS 47-04/1, Serial No. Strip Width, Nominal: 400 mm Strip Width, Max. Passage Width: max. 455 mm Strip Thickness at 400 mm width (steel): max. 1.5 mm Strip Thickness at 400 mm width (copper): max. 2 mm Speed: max. 40 m/min Number of Straightening Rolls: 7 pcs Straightening Roll Diameter: Ø 40 mm Number of Feed Rolls: 2 pcs Feed Roll Diameter: Ø 80 mm Infeed/Throughput Height: 1,500 mm - Straightening rolls hardened, ground, and hard-chromed, supported centrally - Feed rolls hardened, ground, and hard-chromed, with hydraulic lift - Manual straightening roll adjustment - Infeed aid with hydraulically extendable tongue and hydraulically adjustable guide roller - Adjustable side strip guides - All straightening rolls driven via distributor gearbox and cardan shafts - Both feed rolls driven via gearbox and cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or processing thicker material, stroke movement by trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3,600 x 2,200 x 2,200 mm Net weight: approx. 4 tons Decoiler, HMS Type BA 1.5-06/80, Serial No. Coil Weight: max. 8,000 kg Outside Coil Diameter: max. 1,600 mm (with loading saddle) Outside Coil Diameter: max. 2,000 mm (without loading saddle) Coil Flange Diameter: Ø 1,700 mm Inside Coil Diameter, Expansion Range: 460–520 mm Coil Width, Nominal: max. 630 mm Expansion Jaw Width: 750 mm Height of decoiler head above base plate: 1,500 mm - Decoiler head driven by hydraulic motor and gear - Pneumatic overrun brake on decoiler head TWINFLEX - Hydraulic expansion of decoiler head via central wedge slider system - Hydraulic hold-down arm with double pendulum roller, hydraulically driven - Coil loading saddle with 12 t lifting capacity and 300 mm stroke - Decoiler on overfloor travel frame with motorized cross travel Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Ijdpfxsif Sg So Ab Ajib Net weight: approx. 5 tons Central hydraulic unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1,600 x 850 x 1,450 mm Net weight: approx. 800 kg Electrical control cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2,800 x 500 x 2,250 mm Net weight: approx. 800 kg

Stanje: novo, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 732027.1, skupna masa: 122 kg, Nominal point diameter: 8 mm Die depth: 1 mm Dimension X: 0.60 mm Dimension X min.: 0.5 mm Dimension X max.: 0.65 mm Iisdou Tut Ujpfx Ab Aeb Max. pressing force: 55 kN Min. air pressure: 0.3 MPa Max. air pressure: 0.6 MPa Total stroke: 85 mm Power stroke: 7 mm The clinching pliers from Tox Pressotechnik are specifically designed for use in robotic systems and offer a reliable and precise solution for joining materials. They have been developed for seamless integration into automated manufacturing processes and stand out due to their robust construction and durability. The pliers ensure consistently high-quality results and support efficient production. Their versatility makes them the ideal choice for a wide range of industrial applications where precision and reliability are crucial.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, skupna masa: 700 kg, skupna dolžina: 900 mm, skupna širina: 2.100 mm, skupna višina: 2.200 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 5 letvica, električna varovalka: 20 A, Der Ringtester ist für die automatische Rissprüfung an ringförmigen Bauteilen wie Lagerringen und Zahnrädern mit dem eddyvisor C konzipiert. Zusätzlich können Kunden Schleifbrand an Innen- und Außenringen von Wälzlagern prüfen. Hierfür übernimmt ein Roboter das Handling und führt den Sensor entlang der Konturen des Prüfteils. Iisdpfx Abeyx E D Ej Aob Die Anlage prüft mit bis zu zwei Sonden. Alle relevanten Scanparameter sowie die Kommunikation zur Ansteuerung des eddyvisor C sind im Roboter-Scanprogramm integriert. Herzstück des Systems ist der eddyvisor C Wirbelstromprüfgerät mit zwei Kanälen zur zuverlässigen Riss- und Schleifbranddetektion. Die Prozessautomatisierung erfolgt durch einen integrierten Stäubli TX2-60 Roboter. Das gesamte System wird über einen Schaltschrank mit integriertem Steuer- und Bedienpanel gesteuert und bedient. Eine vertikale Spindel mit Spannfutter fixiert jedes Prüfling während der Inspektion sicher. Ausgeschleuste n.i.O.-Teile (NOK - not okay) werden automatisch auf zwei spezielle NOK-Ablagebahnen sortiert. Ein separater Lagerplatz für Referenz- und Masterteile unterstützt die Kalibrierung und laufende Qualitätssicherung während der Prüfung. Das System ist mit dem Optical Reflection Sensor von ibg (iORS) für präzise, berührungslose Inspektion von Ringen ausgestattet.

Stanje: dober (rabljeno), Leto izdelave: 1992, Fully automatic programmable cross-cutting with additional mark detection for defect removal via LUT system Infeed conveyor 6 m 6 discharge stations, total length 12 m Iisdpol H E Taofx Ab Asb The infeed belt is currently not running, most likely due to a frequency inverter issue.

Stanje: rabljeno, Electric Lifting Platform – Pedestrian Stacker, Tiller Stacker for ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225 (lift2move) Serial No.: 19153-HD Year of manufacture: 2010 Model No.: Rated capacity: 225 kg Lifting stroke: 1770 mm Iedpfxsflt Egs Ab Asib Lift height: 2350 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Reach of lifting aid: 400 mm Chassis length: 1130 mm Underride height: 90 mm Underride length: 600 mm Chassis configuration (front/rear): Ø 80 / 150 mm (2 fixed / 2 swivel castors) Total length: 1130 mm Total width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator - 2 pcs lead-acid batteries, 12 Volt, 17 Ah installed in battery pack, battery NEW - External charger 24 VDC, 3 ampere (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-position parking brake - Continuously height-adjustable handle - Load handling flange according to EXPRESSO standard 380 x 50 mm / 4 mounting holes M10 spaced 100-120-100 mm Mounted lifting aid: Quadruple fork attachment Expresso type, lifting aid capacity 40 kg - Lifting aid manually swivels by 90° (can only be locked in 0° position) - Lifting aid laterally shiftable on linear guide by +-100 mm (locking only in center) - Width between holding arms: 320 mm - Height between holding arms (height lockable at): 365 / 400 / 450 mm (max. opening width without locking hole: 510 mm) - Depth between holding arms: 150 mm to stop bolt / 300 mm maximum Total weight: 100 kg good condition

Stanje: rabljeno, Electric Loading Lift – Pedestrian Stacker, Pallet Truck Ijdpfeflt Edjx Ab Ajib for ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225P (lift2move) Serial No. 19500S Year of manufacture: 2008 Type No.: Rated load capacity: 225 kg Lift travel: 1,680 mm Lift height: 2,200 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Reach of lifting aid: 861 mm Chassis length: 1,020 mm Underride height: 90 mm Underride length: 600 mm Chassis configuration (front / rear): Ø 80 / 140 mm (2 fixed castors / 2 swivel castors) Overall length: 1,400 mm Overall width: 600 mm Overall height: 2,450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick change system - Charge status indicator - 2 lead-acid batteries, 12 Volt, 17 Ah integrated in battery pack - External charger 24 VDC, 3 Ampere (mains voltage 230 V, 50 Hz) - Manually movable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load reception flange according to EXPRESSO standard Special design: Lifting aid by GIESLER for radial fan SC-1000 CP XT (Tiger) - Lifting aid load capacity: 25 kg - Lifting aid swivelable 90° via manual hydraulic pump - Opening width between support jaws: 300 / 330 mm - Opening width between clamping rollers: 200 – 300 mm - Clamping via hand wheel - Dead weight of lifting aid: 60 kg Total weight: 140 kg Very good condition

Stanje: rabljeno, Electric Lifting Platform – Mobilift for Ergonomic Handling of Small Loads Pedestrian Stacker, Pallet Stacker Manufacturer: TransOrt Type: PRO 140 M Serial No.: P14012557 Year of Manufacture: 2018 Rated Load Capacity: 140 kg (with 400 mm outreach) Lifting Height: 1380 mm Lifting Cycles per Charge: 140 kg x 1 m x 100 times Maximum Lift Height: 2900 mm (underside of boom) Lifting Speed (fast/slow): approx. 100 / 50 mm/s Outreach Assistance: 890 mm Chassis Length: 1100 mm Chassis Width: adjustable from 440 to 740 mm (measured internally) Chassis Height: 85 mm Underclearance Length: 620 mm Chassis Rollers (front/rear): Ø 80 / 125 mm (2 fixed casters / 2 swivel casters) Overall Length: 1450 mm Iodspcqdwjpfx Ab Ajib Overall Width: 635 mm Height: 1980 mm Maximum Height: 2980 mm (with fully extended lifting device) Battery Capacity: 24 V / 18 Ah - Electric lift drive via toothed belt with safety mechanism which automatically stops the downward travel if the load encounters an obstacle (freewheel mechanism) - Remote control with spiral cable and button for 2 lifting speeds - Control panel with emergency stop, on/off, and charge status indicator - Battery pack with quick-change system - 2 x 12 V, 18 Ah lead batteries in the pack - Integrated charger: 24 VDC, 80 Watt - Manually movable, swivel casters with three-step parking brake - Infinitely adjustable handle height - Quick coupling TAWI system for load pickup - Flange plate for quick coupling on boom: 30 x 340 mm with 5x M8 threads Own weight of lifting platform: 75 kg Installed lifting aid: Jib arm made from 60 x 40 x 3 mm rectangular stainless steel tubing Load capacity of lifting aid: 50 kg Outreach to bracket: 865 mm Attachment bracket with knurled nut Own weight: 13 kg Like new condition, unused from stock 2 units available, price per unit

Stanje: rabljeno, Electric Lift Truck – Pedestrian Stacker, Tiller Stacker For ergonomic handling of small loads EXPRESSO Type Lift & Drive 125 (lift2move) Serial No.: 194679 Year of Manufacture: 2015 Type No.: 1418242111 Rated capacity: 125 kg Lift travel: 1450 mm Lift height: 1785 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Lifting aid reach: 530 mm Chassis length: 890 mm Clearance height: 90 mm Iedjflt Ebopfx Ab Aeib Clearance length: 490 mm Chassis design (front / rear): Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length: 890 mm Overall width: 545 mm Overall height: 1930 mm Motor power: 250 W Battery capacity: 24 V / 7.2 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 pcs. lead-acid battery 12 Volt, 7.2 Ah integrated in battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Manually movable, swivel castors with three-stage locking brake - Continuously height-adjustable handle - Load support U-profile for square section according to EXPRESSO standard 210 x 45 mm / internal size 30 mm / 4 mounting holes M8 spaced 50-60-50 mm Mounted lifting aid: Special design by GIESLER, type LAM-DC power rail Lifting aid load capacity: 40 kg Lifting aid net weight: 24 kg Support rail laterally adjustable via linear guides ±90 mm (3 locking positions: left, center, right) Support rail tiltable ±38° (infinitely lockable) Support rail with 2 clamping tongs Distance between clamping tongs: 550 mm Material clamping thickness: 100 mm Dimensions of material support (W x D): 650 x 155 mm Total weight: 75 kg Very good condition

Stanje: dober (rabljeno), vrsta goriva: dizel, barva: zelen, Leto izdelave: 2019, obratovalne ure: 9.400 h, Leto izdelave: 2019 Namen uporabe: Gradbeništvo Število cilindrov: 1 Iiodpfjyzh Ncjx Ab Ajb Lastna teža: 19.000 kg Dolžina jambora: 9 m Tehnično stanje: dobro Vizualno stanje: zelo dobro Serijska številka: 818.0.2497

Stanje: dober (rabljeno), vrsta goriva: dizel, Leto izdelave: 2017, obratovalne ure: 8.550 h, Leto izdelave: 2017 Pogon: kolesa Dolžina droga: 14 m CE označba: da Tehnično stanje: dobro Optično stanje: dobro Iedpfxoy Shpko Ab Ajib Cena: po dogovoru Serijska številka: 094970

Stanje: dober (rabljeno), moč: 100 kW (135,96 KM), vrsta goriva: dizel, barva: rumena, Leto izdelave: 2017, obratovalne ure: 9.296 h, = Dodatne možnosti in oprema = - PTO = Dodatne informacije = Letnik izdelave: 2017 Iijdpfx Asy Nlldsb Aeb Namen uporabe: Gradbeništvo Pogon: Kolesa Število valjev: 4 Lastna teža: 22.900 kg Znamka nadgradnje: 4 CE oznaka: da Tehnično stanje: dobro Vizualno stanje: dobro

Stanje: rabljeno, Leto izdelave: 1988, Bandwidth (20)44 - 320 mm Band thickness: 0.66 – 4 mm Maximum band cross-section: 930 mm² Reference material (tensile strength): St42-2 (500 N/mm²) Maximum yield strength: 280 N/mm² Maximum coil weight: 4 t Iiodpfx Abolil Ewj Aob Maximum coil diameter: 1,500 mm

Leto izdelave: 1988, stanje: rabljeno, Bandwidth (20)44 - 320 mm Ijdpfxsbicz He Ab Ajib Band thickness: 0.66 – 4 mm Maximum band cross-section: 930 mm² Reference material (tensile strength): St42-2 (500 N/mm²) Maximum yield strength: 280 N/mm² Maximum coil weight: 4 t Maximum coil diameter: 1,500 mm

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 3.303 h, Funkcionalnost: popolnoma funkcionalen, pritisk: 4.000 letvica, skupna masa: 990 kg, Uhde HPS 4011 high-pressure pump 15 HP (photos show current condition) Iisdpfjuixdcex Ab Ajb

Stanje: rabljeno, Leto izdelave: 2019, Robotska celica | HALTER - LoadAssistent S-230-35 opremljena s FANUC robotom M-20i ter HALTER 3-prstnim prijemalom Robotska celica je v dobro vzdrževanem stanju. Iiodpsxnqzrofx Ab Ajb Videoposnetke stroja z lokacije tovarne vam z veseljem posredujemo na zahtevo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Cooling capacity at water supply/return temperature of 15/10°C: 2.3/2.1 kW Flow rate: 0.5 m³/h Iiedpjr Ezdrofx Ab Asb Electrical connection: 380 V, 1 kW Space requirement: 900 x 600 x 1020 mm Weight: 160 kg Water connections reduced to 1/2".

Stanje: skoraj kot novo (rabljeno), Zero Point Clamping System For Rotary Table: Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z Iisdpfshlu Nzex Ab Asb This zero point clamping system was used on a FIBRO rotary indexing table with a clamping surface of 2500 x 2500 mm. For Clamping Plate: Zero Point Clamping System Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z Dimensions: 2290 x 1000 x 120 mm

Stanje: novo, Leto izdelave: 2024, Fiber Laser Cutting System FLV-3015-OE 1.5kW / VF1530-1500W Technical Parameters - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable X and Y axis positioning accuracy: ±0.03 mm - Maximum speed: 40,000 mm/min - Maximum acceleration: 0.5 G - Maximum load capacity: 1200 kg - Power output: 1.5 kW - Energy requirement: 12.0 kW - Source brand: MAX Photonics - Power supply: ~3x400 V 50 Hz - Protection class: IP54 - Length: 4500 mm - Width: 2300 mm - Height: 1920 mm Cutting Thickness - Carbon steel: recommended thickness 12.0 mm, max. thickness 16.0 mm - Stainless steel: recommended thickness 5.0 mm, max. thickness 6.0 mm - Aluminum: recommended thickness 3.0 mm, max. thickness 4.0 mm - Brass: recommended thickness 2.0 mm, max. thickness 3.0 mm Construction - Type: welded frame - Number of support legs: 8 - Servo drives: Schneider - Gearboxes and racks: helical gears - Linear guides: HIWIN - Gearbox: Motovario - Rack: YYC - Ball bearings: NSK - Pressure regulators: SMC - Cooling: Water chiller Automatic lubrication system for axis guides. User-Friendly Operation Loading heavy sheets is facilitated by built-in transporter balls to ensure smooth sliding during loading. The collection of small finished parts is also simplified by trays under the machine, which can be pulled out using a convenient handle. RayTools cutting head with autofocus Option - Otinus Protect This product provides customized protection for your laser source. With this service, you ensure your business continuity is safeguarded. We secure your business so you can complete your orders on time. Control Panel The computer is equipped with Windows and the CypCut software, offering functions such as design, file import/export, and work optimization. Installed programs include lifetime licenses. The machine comes with a wireless controller. Expert Support We maintain constant communication with our customers. Therefore, with every machine purchased, we include a support hours package from Otinus Specialist Assist. Otinus Academy Learning Software With the purchase of this equipment, you receive one-year access to online courses for training new staff or refreshing your knowledge from previous training sessions. Free Drawing Package Every Otinus laser cutting machine comes with a package of ready-to-use CAD drawings. Included in the Price of the Machine 2-day commissioning and operator training Iiodpfx Abophm Slj Asb - Day 1, up to 8 hours – commissioning and control explanation. - Day 2, up to 8 hours – independent work on the machine under supervision of our technician, including the option of programming customer-specific parts. Expert Consultation - By phone: 7:30 am to 9:00 pm (Mon-Sat) – 8-hour support package valid for 12 months. - Online: 7:30 am to 2:30 pm (Mon-Fri) – 8-hour support package valid for 12 months. Access to online training courses - LibreCad – 12 months access Additionally, you receive - CAD drawing package

Stanje: rabljeno, Leto izdelave: 2000, Število krmiljenih osi: 6 Nosilnost: 90 kg Ijdpfxoyclmaj Ab Aoib Doseg: 2810 mm Skupna potrebna moč: pribl. 20 kW Teža stroja: pribl. 1 t Potrebni prostor: pribl. 5,0 x 5,0 x 3,1 m A1: +/- 185° A2: -40° / +93° A3: -210° / +58° A4: +/- 350° A5: +/- 120° A6: +/- 350°

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, 1 Panel dividing saw with area storage Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – Right-handed machine Year: 2008 Including integrated area storage PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore storage management software, scrap management, etc. Storage area approx. 37 x 11.5 m Maximum stacking height in storage: 2,500 mm Speed Concept: Setting a completely new benchmark, revolutionizing panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage + Substantial acceleration of the pusher + Central angle alignment device + Electronic height control of the pressure beam + Optimized movement sequences with integrated gripper measurement system Cutting length: 5,600 mm Cutting width (pusher carriage travel): 5,600 mm Panel rotation device for head cuts Laser alignment light for marking the cutting line on the workpiece for visual or scribed cutting Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle feeding of sensitive single panels by vacuum, as well as efficient infeed of panel stacks Saw blade projection: 130 mm Saw carriage feed: Forward: 1–150 m/min Reverse: constant 150 m/min Pusher speed: Forward/reverse: 90 m/min (In EU countries, forward = 25 m/min) Automatic pressure beam height adjustment: yes Automatic cutting height control: yes Adjustable pressure beam clamping force: yes Adjustable gripper clamping force: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device Minimum clamping width: 0 mm Maximum clamping width: entire cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT WITH LIFTING ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTION FENCE Program-controlled ejection of part stacks into the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVING PROGRAM (AUTOMATIC) Grooving program with graphical input and process graphics. Positioning accuracy: Iijdpfx Absyw Ivhj Asb Groove depth continuously adjustable via control system (hydraulic stop) CUT-OUT / STRESS-RELIEF CUT PROGRAM PART LABELING WITH GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermal transfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' – JUST-IN-TIME – Additional function 'Just-in-time' (possible operating modes): 1. Optimization at the saw ----- - Import function for parts lists from industry packages, Excel, etc. - Inclusion of available remnants in the optimization - In case of production interruption, unproduced parts can be re-optimized - Free selection of which parts with which material to optimize and produce at what time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available remnants - Change panel sizes - Combine runs, etc. A new optimization then takes place directly at the saw. DATA TRANSFER ONLINE + USB PORT CAMERA MONITORING OF THE FEED AREA Material specification for lift table feeding: Maximum waviness: 40 mm/m Minimum panel thickness: 6 mm Maximum thickness tolerance per panel: +/- 0.2 mm Stacking accuracy: +/- 50 mm

Leto izdelave: 2025, obratovalne ure: 50 h, stanje: kot nova (razstavni stroj), Spray-Flood Cleaning System – Parts Cleaning System for Highest Demands and Precision/Ultrafine Cleaning Basket usable dimensions: LxWxH 600x400x300 mm Max. loading weight: 150 kg; loading cart for use in front of the system included 3-Tank Configuration: - Cleaning (600 liters) - Rinse 1 (600 liters) - Rinse 2 (600 liters) Iiodpfx Abeg Itg Eo Ajb System electrically heated - Cleaning methods: spraying, injection flooding, ultrasonic cleaning - Ultrasonic (rod transducer): 3,000 watts effective / 6,000 watts peak – 30 kHz - During cleaning, rinsing and drying, the basket can be stationary, oscillating or rotating (freely selectable in the program) - Hot air and vacuum drying (vacuum pump by Leybold, 300 m3/h) - Full-filtration of all tanks (3), each with Topline bag filter (by Eaton), filter rating freely selectable - Automatic water refill for each tank - Prepared for coalescence oil separator - Prepared for installation of a demineralized water (DI/VE) recirculation system for rinse water treatment Control: Siemens S7-1200 with 16 programs Year of manufacture: 12/2025

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Wave soldering system with comprehensive equipment! Ijdeyt Nlbopfx Ab Asib A spare parts package valued at approximately €20,000 is included in the sale and delivery! The system consists of the following components: - Seho Wave Soldering System MWS 2340-F - Fluxer SelectFlux - Streamline Transport System incl. lifts TECHNICAL DETAILS Preheater PULSAR: 2x convection and 5x Pulsar preheating zones (3,300 mm length) Wetting length of soldering unit: 40 mm + 30 mm Return transport level: raised to 405 mm Finger conveyor: L-shape, short (3 mm) MACHINE DETAILS Number of processed solder frames: 1,060,540 pcs EQUIPMENT - Fluxer SelectFlux - Streamline transport system incl. lifts - Automatic solder bar feeder - Process gas purification system - Finger cleaning unit - Foldable convection top heating - Fan speed monitoring for convection preheating - Standard soldering aggregate - Wide solder nozzle unit, 7 hole rows - Solder frame transport system incl. 2 lifts - Cooling tunnel in the return transport of the soldering system incl. time control - Solder frame lowering station - Replacement filter for condensate trap at machine infeed and outfeed - Residual oxygen measurement with lambda probe - Nitrogen-saving circuit - Transponder system for automatic switching of soldering programs - Selective fluxing module (external module) - Flow rate sensor for flux per spray head - Flux storage tank with connections - Replacement filter for external spray fluxer module – upper system area & lower system area - Spare PC