Seny Navojni Stroj nakup rabljenega (27.586)

Stanje: rabljeno, Navojni stroj, stroj za navoj na cevi, Ridgid 300, rabljeni stroj Proizvajalec: Ridgid Tip: 300 Kedpfeybbamex Abxodn Skupne dimenzije: Širina: 1180 mm Globina: 1250 mm Višina: 1500 mm Električni podatki: 230V Funkcije: rezanje navojev, rezanje na dolžino, odstranjevanje ostrin

Stanje: rabljeno, Ročna navojna naprava, navojni stroj, Ridgid navojni stroj, naprava za navoj na ceveh, stroj za rezanje navojev na ceveh, rabljena naprava Proizvajalec: Ridgid Kdsdpfx Aexfk N Robxon Tip: – Skupne dimenzije: 700 × 340 × 170 mm Dodatki: 1", 1 1/2", 2", 1 1/4", 1/2", 3/4", 2"

Stanje: rabljeno, Internal Thread Cutting Machine HAGEN & GOEBEL Type HG 10 Thread Cutting Machine, Vertical Tapping Machine Machine No. 4462 Year of manufacture approx. 1980 Thread cutting capacity in steel: M3 to M10 Thread cutting capacity in cast iron: M3 to M16 Kdodpfx Abeupbf Dsxsn Thread cutting capacity in brass: M3 to M18 mm Throat depth: 250 mm Quill stroke: 80 mm Table size: 340 x 240 mm Spindle speed: 200-1000 rpm, 6 steps Motor power: 0.55 and 0.75 kW Power supply: 380 Volt, 50 Hz - 6 speed settings via 2 motor speeds and 3 belt stages - Thread pitch by means of guide cartridge - 2 guide cartridges included, with 1.0 mm and 1.25 mm thread pitch - Spindle mount with taper Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with rack-and-pinion and hand crank on the round column - Quick-change tapping chuck, size 1, Ø 19 mm Required space (L x W x H): 850 x 550 x 1800 mm Weight: 255 kg Good condition

Stanje: pripravljen za uporabo (rabljen), Thread sewing machine MARTINI, various models in good condition, immediately available Kdjdeg Ntkqopfx Abxjn

Stanje: rabljeno, Nedavno prispela WMW UPW 25 z 8 kompleti valjev SAMO ZA 6.500,00 EUR 8 KOMPLETOV VALJEV (VKLJUČENO) Kodpfeygm Hvsx Abxsdn BREZPLAČNO NALOŽENO NA TOVORNJAK

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, SASPI GV3-20 Navojni premer: M4–M12 Kdodsxv Si Tjpfx Abxon Dolžina osi pod glavo: 150 mm Maksimalna navojna dolžina: 130 mm Proizvodna zmogljivost: 85–220 kosov/min Teža: 4400 kg Moč motorja: 14 kW Stanje je zelo dobro, stroj je pripravljen za proizvodnjo.

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 308, Tehnične značilnosti: ⚙️ Osnovne specifikacije Atribut Vrednost Razpon premera navoja: 3 mm do 75 mm Valjavni tlak: 0,5 do 20 ton Maksimalna dolžina navoja (potop): 160 mm Maksimalna dolžina navoja (skozi): 2000 mm Območje hitrosti: 24 do 114 min⁻¹ (8-stopenjski menjalnik) Premer orodja: 145 mm do 200 mm Premer glavnega vretena valjev: 54 mm Kjdexx Nuxspfx Abxedn Razdalja med gredmi: 130 mm do 200 mm Dimenzije stroja (D׊×V): 1880 (VKLJUČNO Z HIDRAVLIČNO ENOTO) × 991 × 1270 mm Teža: približno 1,6 tone 🧰 Lastnosti in zmogljivosti Spremenljiva valjčna sila: Nastavljiva glede na različne materiale in profile navoja. Masivna konstrukcija: Izdelan za dolgotrajno industrijsko uporabo z visoko ponovljivostjo. Ročno ali polavtomatsko delovanje: Glede na konfiguracijo in dodatke. Stanje stroja : DELUJOČ

Stanje: dober (rabljeno), Leto izdelave: 2003, Ponudba 25508 Namizni navojni vrtalni stroj z vodilno vreteno Tehnični podatki: - Navojna zmogljivost: M 2 do M 10 - Navojev na uro: do 2400 - Vrtalna zmogljivost (v jeklu): 18 mm - Vpenjalni stožec vretena: MK 2 - Globina vrtanja: 100 mm - Globina navoja: 60 mm - Izsev vretena / stebra: 215 mm - 4 hitrosti vrtalnega vretena: 320 - 1600 min⁻¹ - Miza: 350 x 290 mm - Razdalja vreteno / miza: pribl. 150 - 520 mm - Ciklična - razpršilna mazalna naprava s pnevmatskim priključkom Kjdpfx Absygk Idexjdn - Pogon: 400 V / 0,55 kW - Potrebni prostor: pribl. Š 580 x V 1430 x G 750 mm - Teža: pribl. 150 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, številka stroja/vozila: 8311011, Dvovretenski avtomatski stroj za izdelavo navojev za matice STREICHER TS10 SP Kedpezba Ddofx Abxedn Dimenzije navoja: M6-M12 (1/4"-1/2") Maks. zunanji premer obdelovanca: 25 mm Največja mera čez ploskev: 22 mm Motor vretena: 4 kW Hitrost vretena: 430-4700 min⁻¹ Maksimalna zmogljivost: 5.600 kosov/h

Stanje: novo, Leto izdelave: 2026, An electric tapping machine is a versatile threading tool, ideal for both large factories and small workshops. It features a simple, compact design with a movable head and a high-torque servo drive, ensuring powerful and reliable operation. The tapping machine allows for quick and easy installation of taps, adjustable thread cutting angle, and collet chucks with adjustable settings. This model comes equipped with an oil dispenser and a chip blower. The machine uses a touch control panel with a Polish-language menu. The tapping arm offers two threading modes: automatic and manual, as well as a tightening function. It is suitable for threading various materials. RGE30PW Tapping Machine Features The electric tapping machine is a versatile device for thread forming, suitable for use in both large factories and small workshops. Its key advantage is the reduction in time required for tapping operations, making the entire process more efficient. The tapping machine features a straightforward, compact design with a movable head, enhancing its versatility. The drive is based on a powerful servo motor, guaranteeing strong and reliable performance. For user convenience, the tapping arm is equipped with a touch control panel with an intuitive Polish-language menu. This panel allows easy programming of tapping parameters such as rotational speed, thread direction, and thread cutting depth. Standard equipment includes a micro-lubrication system that effectively cools the tool with minimal lubricant consumption. Additionally, the device has a chip blower that removes swarf, providing clear visibility of the drilled hole. The tapping arm has a quick-change chuck, allowing for easy and fast mounting of taps in both through holes and blind holes. The tapping head can be set vertically or horizontally within a 90° range, and rotates left or right by 180°. Compared to traditional manual threading, this tapping machine offers higher precision and reliability while consistently maintaining a right angle (90°). The machine’s collet chucks are fitted with adjustable overload clutches. The kit includes holders for DIN taps ranging from M6 to M30, ensuring broad application for various thread sizes. They are set to standard torque values for different tap sizes but can be adjusted with the special key included in the set. Moreover, the machine features a manual mode, allowing users to control the tapping process manually. Programmable cyclic reverse is also available, which helps break chips and maintain process efficiency. These features provide increased flexibility and precision in tapping operations. Kdsdpfxovughxe Abxen Set includes DIN tap holders for: M5-6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30 The machine is sold without a work table, vise, or taps. Technical Specifications Power: 1.2 kW Supply voltage: 230V Weight: 50 kg Max. arm reach: 1200 mm Max. rotational speed: 200 rpm

Leto izdelave: 1995, stanje: dober (rabljeno), Hydraulic 2-roll thread rolling machine Seny, model D-44 EH, hydraulic drive, manual and automatic cycle, adjustable roller speed. Max. threading diameter: 40 mm, min. diameter: 3 mm, up to pitch 3.5 mm, max. knurling pitch: 1.75 mm, max. roller width: 80 mm, roller diameter min. 80 mm / max. 120 mm, spindle speed: 47–94 rpm, roller holder shaft diameter: 40 mm, center distance min. 80 mm / max. 165 mm, max. working stroke: 7 mm, feed rate from 0.5 to 6 mm/s, rolling time from 0.1 to 100 seconds, roller holder shaft tilt: ±5°, main motor power: 3 kW, total installed power: 4.68 kW, tank capacity: 150 L, approx. weight: 1100 kg, equipped with various rollers. Kdjdpfx Abopwbvkoxon

Stanje: dober (rabljeno),

Stanje: zelo dobro (rabljeno), Premer obdelovanca: 10 - 250 mm Dolžina navoja: 900 mm Kedpfoyb S Riox Abxedn Navojni korak: 0,3 - 100 mm Vrtljaji vretena: 72 / 1700 - 2540 min⁻¹ Odrezovanje: 0,03 - 8 mm Maks. vpenjalna dolžina: 1190 mm Največji modul: 10 Obdelovalni vrtljaji: 0,4 - 160 min⁻¹ Skupna potrebna moč: 13 kW Teža stroja približno: 7,4 t Potreben prostor približno: 4,5 x 2,0 x 2,1 m Veliko dodatne opreme: prirobnice, pretvorniki, naprave in valji za obdelavo, notranje brusno vreteno, podporniki ipd.

Stanje: rabljeno, Leto izdelave: 1986, Workpiece diameter 460 mm Thread length 900 mm Thread pitch 100 mm Total power requirement 10 kW Machine weight approx. 8 t Space requirement approx. m R E I S H A U E R (Switzerland) Ksdpfet H Smtjx Abxjdn Universal - extra large - thread and worm grinding machine Model ULG 46 Year 1986 _____ ___ Grinding length: 900 mm Maximum workpiece clamping length: 1,190 / 1,400 mm Workpiece Ø / thread Ø, min./max.: 10 – 460 mm (!) Longitudinal adjustment of workhead on table: 210 mm Maximum workpiece weight approx.: 100 kg Work spindle bore approx.: 65 mm Lead range for single-rib wheels: 0.3 – 100 mm Maximum module: 10 Maximum lead angle: +/- 40° Grinding wheel dimensions, Ø x width: 350 x 20/40 mm Relief grinding size: 0.03 – 8 mm Presettable number of flutes: 2 – 10, 12, 14, and 16 27 workpiece speeds: 0.4 – 160 rpm Infinitely variable grinding wheel speeds: 72 – 2,500 rpm Spindle drive approx. 10 kW * Total connected load approx. 25 kW - 400 V - 50 Hz Weight approx. 8,000 kg Accessories / Special Features: • Machine was originally built with an increased center height for a maximum workpiece swing of 460 mm, allowing thread machining on larger workpieces and housings (aircraft industry)! • Internal thread grinding device with two dressing devices (long and short spindles) • Various flanges with grinding wheels • USL 3200 dressing device for pressure roll profiling, mounted above the grinding wheel (not motorized) • USL 700 dressing device for manual profiling of single-ribbed grinding wheel flanks • Automatic plunge-cut device. Automatic lift-off of grinding slide for the return of the workpiece slide • Relief grinding device with several cams, also suitable for plunge grinding • Hydraulic tailstock with foot switch and expansion compensation • Two simple dressing devices, manually operated for straight profiling • Two 3-point steadies for heavy workpiece support • Various flanges, set of change gears, numerous coolant nozzles, setting gauge, 3 faceplates up to 500 mm diameter, separate electrical cabinet for adjusting various grinding cycles • Lift-off safety hood above the working area, monitored by limit switches, etc. No coolant device available, but connection to a central coolant supply with valve control as well as a separate coolant chiller and standalone dust extraction unit.

Stanje: rabljeno, Leto izdelave: 2011, Workpiece diameter 320 mm Thread length 570 mm Thread pitch 315 mm Total power requirement 17 kW Machine weight approx. 12 t Space requirements approx. m O F F E R We can offer you, subject to prior sale and errors, ex stock as follows: M I K R O M A T Universal Thread and Worm Grinding Machine Model GSU 320/1 PC Year 2011 Reconditioned # 2319.01.27 _____ Max. / Min. grinding diameter 3 – 320 mm Max. grinding length (Grinding wheel width 50 / 8 mm) 520 / 570 mm Centre distance 1,000 mm Max. workpiece weight 160 kg Workpiece spindle bore 40 mm Lead range min./max. 0.25 - 315 mm Max. lead angle + / - 40° Max. profile size 20 module Automatic radial dividing device 2/3/4/5/6/8/10/12/ 15/20/24/30/40/60 Relief grinding stroke 0 - 6 mm Plunge grinding depth 0 - 6 mm Workpiece rotational speed 0.125 - 100 rpm Rapid return 2 m/min Grinding wheel Ø x width x bore 500 x 60 x 203 mm Max. grinding wheel speed 1,595 rpm For dressing/centring 12 - 32 rpm Spindle drive approx. 6.5 kW Total drive 17 kW - 380 V - 50 Hz Weight 9,500 / 12,000 kg Accessories / Special Equipment • The machine was purchased in 2011 as a factory-reconditioned and electronically upgraded (new) machine directly from the manufacturer MIKROMAT! • Universal machine for automatic grinding of single and multi-start worms as well as threads with straight and curved flanks using single- or multi-profile grinding wheels. • The following grinding operations can be performed via simple cyclic operator guidance in the SCHLEICHER PLC control system PROMODUL U: longitudinal grinding, relief grinding, plunge grinding, groove grinding, taper grinding. In these operations, infeed and compensation occur automatically. For relief grinding and taper grinding, cams are additionally needed; division is done via change gears! • Grinding wheel hand dressing device for profiling single-profile wheels, left and right flank • Non-driven steel pressure roller burnishing device for mounting above the grinding wheel • Open rest for mounting on the grinding table, and closed 3-point rest • Workpiece carrier device in the workpiece spindle with various centres, various workpiece arbors • Hand division device for peripheral division for mounting on the workpiece spindle • Large number of change gears, additional accessories and spare parts, operating manuals. • Elaborate KNOLL coolant band filter system HL650/1500 with HYFRA cooling unit Condition: very good - demonstration ready – Delivery: immediately ex stock - as inspected Ksdpot Hxbdsfx Abxjdn Payment: strictly net – upon receipt of invoice We look forward to your order. We always stock thread grinding machines – please let us know your requirements!

Stanje: rabljeno, Leto izdelave: 1979, Workpiece diameter 320 mm Thread length 300 mm Thread pitch mm Total power requirement 90 kW Machine weight approx. 12,000 kg Space requirement approx. m Kodpet Hwnpjfx Abxodn Thread/worm grinding machine for steering worm

Stanje: rabljeno, Leto izdelave: 1988, Technical details: Pressing force: 10 t Maximum workpiece diameter: 40 mm Thread length: 70–80 mm Workpiece diameter min/max: 3 / 40 mm Rotational speed: 47–94 rpm Feed rate: 0.5 – 6 mm/s Stroke: max. 7 mm Kdjdpfx Absw D Aq Texjn Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions (W x D x H): 1.4 x 1.4 x 1.7 m Hydraulics dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Maximum thread diameter: 40 mm; Minimum thread diameter: 3 mm Up to max. pitch: 3.5 mm; Max. pitch: 1.75 mm Roll width min.: 80 mm; max.: 120 mm Spindle speed: 47–94 rpm Roller spindle diameter: 40 mm Various rollers as accessories

Stanje: kot nova (razstavni stroj), skupna masa: 900 kg, delovna širina: 1.000 mm, priključek za stisnjen zrak: 12 letvica, višina izdelka (maks.): 90 mm, zahteva za prostor dolžina: 3.500 mm, potrebna širina: 3.500 mm, delovna dolžina: 2.400 mm, Prodamo 6 etažno stiskalnico za širinsko lepljenje lesa, dimenzije lepljenja 2400 x1000 x 90 mm, ročno obračanje Nova , na zalogi, takojšnja dobava Kodpfx Ajt Agh Dsbxjdn

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, The SLV, SLH hydraulic press is intended for thick gluing of wood (window profiles, glued beams, etc.) with natural drying of glued joints. The work surface is equipped with hydraulic compression units and hydraulic trolleys for aligning the elements. Regulation for each segment is individual or together. Possibility to close each cylinder. The surfaces that come into contact with the adhesive are protected with stainless steel tape. The press is designed so that it is also possible to later upgrade the segments to the desired working length. Kjdpfegf A S Nsx Abxsdn

Stanje: pripravljen za uporabo (rabljen), premer obdelovanca (maks.): 50 mm, Pripravljen centerless stroj za uporabo, z rezervnimi kamenčki, možnost preizkusa na lokaciji! Kjdpfx Abeyvn A Soxedn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Machine used in a fish processing plant, previously used for washing squid. In very good condition, like new. Kdjdpsv T Rlljfx Abxsn

Stanje: zelo dobro (rabljeno), V zelo dobrem stanju. Kedpfx Abexcll Uexodn

Stanje: dober (rabljeno), Laminating pressure: 220 kN Workpiece diameter: 3mm min; 70mm max Feed pitch: 6mm max Knurling pitch: 2.25mm max Roller width: 160mm max Kodpevyyyxjfx Abxjdn Roller diameter: 133mm min; 170mm max Roller shaft speed: 24, 30, 38, 45, 62, 72, 90, 114 rpm Roller shaft diameter: 54mm standard; 69.85mm special Center distance between shafts: 135mm min; 230mm max Working stroke: 15mm max Feed rate: from 0.5mm/s up to 6mm/s Laminating time: from 0.1s up to 100s Pause time: from 0.1s up to 100s Main motor: 5.5 kW Power consumption: 8.6 kW Tank capacity: 130 L Approximate weight: 2100 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, obratovalne ure: 4.624 h, vrsta upravljanja: CNC krmiljenje, najv. debelina jeklene pločevine: 2 mm, leto zadnje generalne obnove: 2012, Brez najnižje cene - zagotovljena prodaja najvišji ponudbi! Leta 2012 je Salvagnini izvedel popolno prenovo! TEHNIČNI PODATKI Največja dolžina vstopa: 1.850 mm Največja širina vstopa: 1.500 mm Največja širina izstopa: 1.500 mm Minimalna dolžina: 285 mm Minimalna širina: 190 mm Največja diagonala: 2.150 mm Največja referenčna mera: 2.000 mm Kdedpfx Abozb H Txoxon Minimalna debelina pločevine: 0,50 mm Maksimalna debelina pločevine, konstrukcijsko jeklo (do 410 N/mm²): 2,00 mm Maksimalna debelina pločevine, nerjaveče jeklo (do 600 N/mm²): 1,25 mm Obdelava predlakiranega materiala: 3,00 mm Maksimalna dolžina orodja za CLA-opcijo: 1.000 mm PODROBNOSTI STROJA Tip upravljanja: CNC-krmiljenje Delovne ure: 4.625 h OPREMA LS Zgornji upogibni nož LI Spodnji upogibni nož Ročna nastavitev dolžine držala pločevine CLA Enota za upogibanje dolgih jezičkov HP12015 R81 Hladilna naprava

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 13230, širina kolesa: 25 mm, premer kolesa: 130 mm, model krmilnika: Siemens 840D, premer vretena: 85 mm, maksimalna frekvenca hodov: 2.500 obr/min, TEHNIČNE PODROBNOSTI Največji premer kolesa: 130 mm Širina kolesa: 25 mm Maks. modul: 3 Min. modul: 0,5 Premer sunčne gredi: 85 mm Število gibov: 500 - 2.500 gibov/min (brezstopenjsko nastavljivo) Hod: 30 mm PODROBNOSTI O STROJU Model krmiljenja: Siemens 840D Skupna potrebna moč: 48 kVA Kedpjzb Dtcjfx Abxodn Dimenzije & Teža Prostor potrebščin (D x Š x V): 4.700 x 3.000 x 3.300 m Teža stroja ca.: 11,5 t OPREMA Kontra nosilec s konico Transporter ostružkov Hidravlično upravljano kontra roko in linearna vodila