Scm Uno 900 3/26 nakup rabljenega (71.842)

Stanje: rabljeno, Tehnični podatki: Delovna širina: 900 mm 1 kalibracijska enota Premer valja: 140 mm 2 kalibracijska enota Premer valja: 140 mm Višina obdelovanca: 160 mm Premer odsesovalnega priključka: 2x160 mm Električno dvigovanje Nodpfjzd Dcnex Afmscu Analogni prikazovalnik Varnostno stikalo Moč glavnega motorja: 9,5 kW Napetost: 380 V Skupne dimenzije: Dolžina: 1500 mm Širina: 1600 mm Višina: 1800 mm

Stanje: rabljeno, Tehnični podatki: Širina gosenice: 220 mm Maksimalna višina reza: 120 mm Maksimalni premer žaginega lista: 350 mm Stopenjsko brezstopenjsko nastavljanje podajanja Avtomatski mazalni sistem Zaščita proti povratnemu udarcu Vodilo Izvlečni priključek: 180 mm Varnostno stikalo Napajanje: 380 V Moč glavnega motorja: 18,5 kW Skupne dimenzije: Njdpfozd En Eex Afmecu Dolžina: 1700 mm Širina: 1600 mm Višina: 1250 mm

Stanje: rabljeno, Brušilni stroj SCM TIP UNO 900 mm Ncjdpfx Afex I R Smemou

Stanje: rabljeno, Tehnični podatki: Ncodezd Eu Sspfx Afmeu Premer vretena: 30 mm Višina vretena: 170 mm Obrati: 3000/4500/6000/7000/10000 obr/min Ročna nastavitev višine vretena Blokada vretena Dimenzije delovne mize: 720x2620 mm Nastavljive vodilne roke Moč motorja: 5 kW Napajanje: 400 V Skupne dimenzije: Dolžina: 1050 mm Širina: 2620 mm Višina: 1850 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Plinski gorilnik Weishaupt z plinsko progo Dungs DN 50 Tip gorilnika: WM-G10/3-A Izvedba: ZM-LN Leto izdelave: 2011 Moč: 125-900 kW Ncjdpfxjzdku Rj Afmeu

Stanje: rabljeno, Used machine Equipment and Technical Data: High-performance multi-blade saw Nsdpjzbv Hzefx Afmjcu Heavy grey cast iron construction Robust transport chain consisting of directly connected precision links Wear-resistant guide surfaces of the transport chain with extremely low friction coefficient Automatic chain lubrication Quadruple saw shaft bearing for maximum stability Saw bush with conical seat and self-centering 4 pressure rollers for precise cutting even with thin workpieces 4 rows of slitter and anti-kickback fingers Cutting height up to 110 mm with 350 mm saw blade diameter Minimum cutting length 250 mm Clamp width of saw bush: 300 mm Minimum and maximum saw blade diameter: 200/350 mm Saw shaft speed: 4200 rpm Feed speed: 4-48 m/min Transport chain width: 300 mm Saw bush diameter (with 2 wedges 20 x 5 mm): 70 mm Working table height: 750 mm Extraction port diameter: 200 mm Airflow at 25 m/sec: 3500 m³/h Main motor: 25 kW Feed motor: 1.1 kW With laser alignment light Weight: 1800 kg Sound emission: 98.3 dB(A) at idle without extraction In operation: 107.1 dB(A) Workplace-related emission value: 81.8 dB(A) at idle without extraction In operation: 91.2 dB(A) Availability: short notice Location: 63934 Röllbach

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. Ncsdjxqggcopfx Afmeu • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!)

Stanje: rabljeno, Tehnični podatki: Premer vretena: 30 mm Nsdpjzd Eufefx Afmocu Višina vretena: 130 mm Obrati: 3000/6000/8000/10000 obr/min Ročna nastavitev višine vretena Blokada vretena Dimenzije delovne mize: 1800x650 mm Nastavljiva vodila Moč motorja: 4 kW Napajanje: 400 V Skupne dimenzije: Dolžina: 650 mm Širina: 1080 mm Višina: 1300 mm

Stanje: rabljeno, Tehnični podatki: Premer vretena: 30 mm Višina vretena: 160 mm Nagibno vreteno: -10° - 45° Obrati: 3000/4500/6000/8000/10000 obr/min Ročna nastavitev višine in kota vretena Blokada vretena Dimenzije delovne mize: 760/2500x1000/1500 mm Nastavljive vodilne roke Moč motorja: 4 kW Napajanje: 380 V Skupne dimenzije: Nedpfjzd Ap Tjx Afmecu Dolžina: 1500 mm Širina: 2500 mm Višina: 1350 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013 Rezkalna glava Delovno območje X: 3000 Delovno območje Y: 900 Ncedpfjw Npyqex Afmju Delovno območje Z: 50 Ločeni agregati: 1 Navpični vrtalnik: 12 Vodoravni vrtalnik X: 4 Vodoravni vrtalnik Y: 2 Rezalna žaga za utore: Da Stacionarni stroj: Da Sistem vpenjanja: Klešče Varnost: Fotocelica Krmiljenje in programska oprema: SCM XILOG Minimalne dimenzije: 3920x1170x2150

Stanje: dober (rabljeno), Koda: 0322 Znamka: SCM Nedpeytufgofx Afmecu Model: L'INVINCIBILE SI 3 – CE standard Elektronska formatna žaga z upravljano osjo, nagibnim rezilom in podrezovalno enoto, namenjena za pohištvo, obdelavo plošč, izdelavo pohištva po meri, vrata, lesena okenska okvirja, kuhinje, kopalniško pohištvo, plastiko, kompozitne materiale in različno drugo – CE standard – leto 2017 Tehnični podatki: - Voziček v celoti iz aluminija s kontaktnim drsnim sistemom po kaljenih in brušenih jeklenih vodilih - Elektronska upravljalna enota EASY TOUCH 12: 12-palčni barvni ravni zaslon – Neposredno upravljanje naslednjih osi z ročnim, ročnim inkrementalnim, polavtomatskim in avtomatskim načinom: dvig glavnega rezila, nagib rezilne enote, premik paralelnega vodila, dvig in pomik podrezovalnega rezila. Pomoč operaterju z grafično podporo. Baza podatkov orodij - Pomožna funkcija za operaterja na elektronskem upravljalniku - Stensko nastavljiva upravljalna plošča - Podrezovalna enota z lastnim motorjem - Dolžina formatnega vozička: 3800 mm - Premer glavnega rezila: 400 mm - Premer podrezovalnega rezila: 120 mm - Nagib rezila: 0-45 stopinj - Maksimalna višina reza pri 90°: 140 mm - Maksimalna višina reza pri 45°: 97 mm - Hitrost vrtenja rezila: 3000/4000/5000 min⁻¹ - Hitrost vrtenja podrezovalnega rezila: 8500 min⁻¹ - Moč motorja glavnega rezila: 9,5 KM - Moč motorja podrezovalnega rezila: 1,7 KM - Širina reza do paralelnega vodila: 1500 mm - Programirani paralelni vod s THK vodenjem - Elektronska nastavitev podrezovalne enote - Pravokotni okvir s sistemom ‘COMPEX’ za poševne reze z avtomatsko kompenzacijo položaja prislona - Start/stop tipke integrirane v vozičku - Ekscentrična roka za vpenjanje obdelovanca - Podaljšek delovne površine - Pravokotno vodilo s 3 LCD prikazovalniki za položaje prislona - Popolna podpora in brezžična povezava: nastavljiv okvir za poševne reze s popolno brezžično funkcijo - Premer odsesovalne cevi: spodaj 120 mm, na zgornjem zaščitnem pokrovu 100 mm - Skupne mere sestavljenega stroja: 4200 × 4300 × 1800 mm (V x Š x G) - Mere za transport: 4200 × 2350 × 1800 mm + paleta 1600 × 1000 × 800 mm - Masa: 1140 kg

Stanje: rabljeno, Leto izdelave: 2019, including tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center comes with a comprehensive array of milling and drilling tools to meet any woodworking requirement. Ncjdpfx Aovvi Scofmju - Highly efficient: equipped with drilling spindles running at 8,000 rpm and the industry's most robust spindle technology, offering over 1,000 maintenance-free operating hours. - Optimal and completely equipped: the suction cups can be individually configured on the TV FLEX worktable, allowing the machine to be tailored precisely to your needs. - Easy and intuitive programming thanks to integrated Cad-Cam MAESTRO CNC software. - User-friendly operation: the lowered machine frame provides easy access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine bed. In the PRO SPACE version, no additional protective infrastructure is required. Supporting structure The supporting frame is made from an exceptionally sturdy, monolithic steel base, heavily ribbed and extremely robust. The extra-wide support surface is specially designed to give the machine maximum stability and to ensure constant precision under all working conditions. No floor anchoring is required. The base forms a large and solid support for the moving gantry. The machining unit is equipped with a balanced, stable, and highly durable support structure that withstands heavy loads, guaranteeing top-tier performance and superior accuracy. The moving gantry is made from a single, solid piece, anchored to the base, and runs on premium prismatic rails with ball-bearing carriages. The machining unit is attached to this and moves in the Y and Z axes, also on prismatic rails with ball-bearing carriages. The movement of the lower mobile unit (X axis) and the machining unit along the gantry (Y axis) is ensured by a rack-and-pinion drive with helical gears, resulting in greater tooth engagement for increased acceleration and higher speeds along the X and Y axes. The specially designed helical gearing reduces wear on mechanical parts and enables quieter operation. The vertical Z-axis is driven by a ball screw, which ensures perfect balance under dynamic load, as well as high acceleration and deceleration speeds. The main milling unit is directly coupled to the Z-axis carriage, providing extremely fine processing quality by eliminating vibrations. The X-Y-Z axis movements are driven by brushless motors powered by static inverters, which provide: - Shorter machining times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders - No setup required upon machine start-up due to absolute encoders - Elimination of general maintenance work as the brushless system has no brushes The control and management of all axes and working elements is handled via e

Stanje: novo, Leto izdelave: 2025, Spindle Moulder minimax twf 55 es M 3 UP Professional woodworking machine featuring motorized spindle height and tilt adjustment, four speeds, and electronic control system. Article Number: 5502266 Brand: Ncedpshp Rc Iefx Afmou Holzkraft / SCM EQUIPMENT Equipment: Aluminium sliding table ✔ Handle on sliding table ✔ Fence: FLEX ONE: Heavy-duty professional version, automatic adjustment of the entire fence based on tool diameter, manual chip removal adjustment, swiveling device, aluminum fence jaws with connecting strips Spindle height adjustment: Motorized Telescopic mitre fence: With two flip stops Spindle tilt adjustment: Motorized Outrigger table: ✔ Control system: Ready 3: Programmed spindle unit movement in two axes, automatic fence adjustment based on tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece guard ✔ Control element position: Pivoting control panel at eye level Eccentric clamp TECHNICAL DATA Dimensions and Weights: Length (product) approx.: 1200 mm Net weight approx.: 510 kg Width/Depth (product) approx.: 2000 mm Extraction Connection: Extraction port diameter: 2 x 120 mm Worktable: Table length: 1200 mm Sliding table length: 1200 mm Table width: 530 mm Sliding table width: 360 mm Table height: 900 mm Sliding table height: 142 mm Installation Information: Space required (length): 2800 mm Machine body width/depth: 846 mm Space required (width/depth): 2910 mm Working area (length): 1600 mm Note on space requirement: Dimensions take into account maximum travel or usable lengths. Working area (width/depth): 2300 mm Machine body length: 1200 mm Note on working area: Please add the specified dimensions to the space requirement to obtain the recommended installation area for the machine. Electrical Data: Connection voltage: 400V Main motor power: 5.0 kW Mains frequency: 50 Hz Spindle: Spindle tilt: 0 to -45° Spindle speed display: Shown on control display Usable spindle length: 125 mm Spindle shaft diameter: 30 mm Spindle speeds: 3500/6000/8000/10000 rpm Cutter Head Diameter Maximum: Max. tool diameter: 240 mm Max. tool diameter (profile milling): 240 mm Max. tool diameter (retractable): 230 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, ST 3 classic F 23 – Combined Saw and Spindle Moulder Featuring tilting saw blade, tilting spindle moulder, and anodized aluminium sliding table Robust steel and cast iron construction Large support surface and precise cast iron table High-precision sliding table made of anodized aluminium (travel distance 2250 mm) Large outrigger (900 x 600 mm) with extendable aluminium telescopic fence Max. saw blade diameter 315 mm with scoring unit, tilting from 90° to 45° Saw rip fence with fine adjustment Stable saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 manually adjustable spindle speeds from 3,500 – 10,000 rpm Spindle moulder with forward/reverse rotation Standard arc-shaped spindle guard Two 5.0 kW motors with high performance reserves Cast Iron Spindle Moulder Unit secured at the top on both sides precision ball bearings at the top close to the pivot point four optimally graduated spindle speeds allow for sharpening of workpieces Powerful Motors Industrial motor, 100% duty cycle for continuous operation at full load Scope of Delivery: Arc-shaped spindle guard Anodized aluminium sliding table Aluminium fence jaws Folding stops Technical Data Cast iron table dimensions: 1112 x 430 mm Edging length: 2250 mm Max. saw blade diameter with/without scorer: 315 mm Max. cutting height at 90°/45°: 100/70 mm Max. crosscut length: 2660 mm Saw blade tilt: 90° - 45° Cutting width: 900 mm Speed: 4000 rpm Table router: - Spindle tilt: 90° - 45° Useable spindle length: 100 mm Max. tool diameter: 210 mm Max. tenoning tool diameter: 275 mm Max. tool diameter, retractable: 180 mm Speeds: 3,500/7,000/10,000 rpm General: - Nodpfecnwydox Afmscu Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) Weight: 470 kg Extraction ports diameter: 2 x 120 mm Saw blade guard extraction port diameter: 60 mm Location: From stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table made from anodized aluminium Robust steel and cast iron construction Large support surface and precision-cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence extendable up to 2660 mm with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° - 45° Saw rip fence with fine adjustment Sturdy saw unit and large double trunnion spindle moulder unit ensures maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-free cast iron Three manually adjustable spindle speeds from 3500 - 10000 rpm With forward and reverse spindle rotation Standard arc milling guard Safety reversing aluminium fence jaws Two motors with high power reserves Two removable handwheels for convenient and quick operation Dimensions and Weights Weight approx. 470 kg Dust Extraction Connection Dust extraction port diameter 2 x 120 mm Saw blade guard dust extraction port diameter 60 mm Electrical Data Drive motor power 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 – -45 ° Usable spindle length 100 mm Spindle speeds 3500/7000/10000 rpm Max. cutter diameter not retractable 210 mm retractable 180 mm tenoning 275 mm Circular Saw Unit Crosscut length 1600 mm Cut width with rip fence 900 mm Max. crosscut width left of saw blade 2660 mm Saw blade tilt 90–45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade projection 90° 100 mm Max. saw blade projection 45° 78 mm Main saw blade diameter 315 mm Main saw blade diameter explanation independent of scoring unit Main saw blade speed 4000 rpm Sliding Table and Table Table length 1112 mm Table width 430 mm Scope of Delivery: Arc milling guard Anodized aluminium format sliding table Aluminium fence jaws Ncjdpfx Aehp Rdlofmou Flip stops Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, minimax c 26g TERSA – Multi-function combination machine for sawing, milling, planing and thicknessing. The work tables are made from heavily ribbed grey cast iron and the frame is constructed from welded steel, ensuring outstanding torsional rigidity and vibration-free operation. Unique in its class: smooth-running anodised aluminium sliding table with ball contact system. Tilting saw blade from 90° to 45°. Table extension with aluminium crosscut fence for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically-toothed steel infeed roller for constant feed when thickness planing. Radius milling guard for profiling operations, standard with fine adjustment. Milling unit with two speeds. Three independent motors, one for each working unit. Quality Made in Europe. Equipment details Aluminium sliding table With proven ball contact system, used millions of times Dust and dirt-resistant thanks to minimal contact area between ball and trapezoidal rail Permanently smooth-running Saw unit adjustment Manual height and tilt adjustment of the saw unit via handwheel Precise positioning using a scale TERSA planer knife shaft No more setting and screwing Planer knife changes in seconds Self-locking Particularly low-noise Spindle moulder The milling unit features two speeds for flexible tooling options. The machine is equipped with a finely adjustable radius milling guard for profiling. With the aluminium sliding table, tenoning operations are easily possible. Thicknesser With the powerful thicknessing feed, workpieces up to 200 mm height can be planed. The helically toothed infeed roller guarantees consistent material feed. The jointer table folds up space-savingly towards the inside of the machine. Conversion from surface planer to thicknesser is completed within seconds by a single lever. Surface planer Standard with TERSA quick-change planer knife system Large dimensioned planing tables Planing and thicknessing tables made from grey cast iron guarantee maximum smooth running and vibration-free operation. Ncedpfx Asdqzh Tofmju Saw unit Saw tiltable up to 45° With 250 mm diameter saw blade, max. 80 mm cutting height Rip cuts up to 500 mm with parallel fence Table extension With angle scale and aluminium crosscut fence for mitre cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer shaft Anodised aluminium sliding table Mitre fence with flip stop Multi-function fence for rip and surface planing Eccentric clamp arm Model: minimax c 26g TERSA Item no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilt: 90 - 45 degrees Max. cutting height at 90°: 80 mm Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer shaft type: TERSA Planer shaft diameter: 62 mm Number of planer knives: 3 pcs Jointer table width: 260 mm Jointer table length: 1040 mm Saw/jointer fence tilt angle: 90/45 degrees Max. jointer depth of cut: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. working height in thicknesser: 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Combination machine 4-in-1 HOLZKRAFT CU 410c F 26 N Tersa -- Technical Specifications -- - Circular Saw - Nodpfod Dtc Tsx Afmocu Edging length: 2,600 mm Max. saw blade diameter: 315 mm Max. cutting height at 90°/45°: 100 / 79 mm Max. crosscut width to the left of the saw blade: 2,310 mm Rip capacity at parallel fence: 900 mm Saw blade tilt: 90° - 45° - Planer - Working width: 410 mm Planer table length: 1,660 mm Cutterblock diameter / number of planer knives: 72 mm / 3 pcs - Thicknesser - Table dimensions: 410 x 605 mm Min./max. working height: 3 / 230 mm Max. chip removal: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning tool diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 6,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter (saw blade guard): 60 mm - Special Price - Location: Ex stock 54634 Bitburg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Obseg rezanja: 5600x5600 mm 1x Gabbiani G 3 130 (56) - visoko zmogljiva žaga za razrez plošč 1x kompaktni tiskalnik nalepk 1x upravljalna konzola "eye-M EVO" 1x programska oprema človek-stroj vmesnik (HMI) MAESTRO ACTIVE 1x Maestro pattern 1x visokozmogljiva fiksna zračna miza z vodilom, 2500x600 mm, z vstopnimi valji 3x visokozmogljiva premična zračna miza - 2500x600 mm, z vstopnimi valji 1x dvojni bočni avtomatski izravnalnik z motornim pogonom 1x nožno stikalo za ZAGON/USTAVITEV delovnega cikla 1x naprava za utore z nastavitvijo višine žaginega lista preko krmiljenja 1x "Autosetting" naprava na žagalnem vozičku za dolžino/širino reza 1x glavni motor žaginega lista 25PS (18kW) 50 Hz s zvezda-trikot zagonom 1x hitro vpenjanje žaginih listov z mehanskimi prirobnicami "AKE" 1x selektivno zapiranje vpenjal zaponk (površina 0 - 1600 mm) 3x dodatna dvojna vpenjalna zaponka 4x dodatna vpenjalna zaponka z enim prstom 1x kompaktni tiskalnik nalepk Office 1x Cut Editor 1x Maestro optiwise - Advanced - št. 1 licenca 1x Maestro connect: storitvena pogodba za 1 leto (vključuje kit Gateway "plug&play") 1x podstavek 1x STROJEV JEZIK: nemščina 1x JEZIK PC: nemščina 1x SPEC01 posebna izvedba 01 1x Evropski varnostni predpisi (CE oznaka), vklj. 123 ur zagona na lokaciji (znotraj Nemčije) (dnevni delovni čas je 8 ur, vklj. prihod in odhod). Nodpfx Aoxlvktofmscu Vključno z 1 dnevom spletnega usposabljanja MAESTRO OPTIWISE PRO (po potrebi) Vključno z MAESTRO CONNECT 1 leto Vključno z MAESTRO PATTERN IMPORT (255 € brezplačno) !!! POLNO TOVARNIŠKO JAMSTVO V PRVEM LETU !!! Iz stranke v insolventnosti, na voljo po zelo ugodni ceni. KATALOG CENA stroja je znašala 270.000 €

Stanje: zelo dobro (rabljeno), SCM Sandya UNO - 90 cm širina brušenja - En 11 kW motor poganja dve enoti Njdpoza T Rhsfx Afmscu - Brusilni krožnik - Prva enota kalibrira jekleno gred, druga gumijasti valj in brusilni krožnik - Fotoelektrična oscilacija, nizka potreba po tlaku zraka Zunanje mere: dolžina 170 cm, širina 145 cm, višina 174 cm (stroj 162 cm + 12 cm šoba) Teža 1100 kg Oglejte si video

Stanje: zelo dobro (rabljeno), track width 300 mm minimum workpiece length 390 mm minimum workpiece width 12 mm minimum workpiece height 8 mm maximum workpiece width 950 mm blade diameter 350 mm bore diameter 70 mm spindle speed 4200 rpm Ncjdpfx Afewndqijmou main motor power 35 HP stepless feed speed adjustment 6–48 m/min table dimensions 1530 x 1100 mm machine weight 1800 kg year of manufacture 2008 CE certificate

Stanje: dober (rabljeno), Širokotračni brusilni stroj SCM Sandya Uno Delovna širina: 900 mm Delovna višina: 3-160 mm Število agregatov: 2 Agregat z gumijastim valjem Kombi agregat s čeveljčkom Njdpfxjy Sr Rrj Afmecu Glavni motor: 11 kW Pnevmatska oscilacija Dimenzije brusnega papirja: 930×1525 mm Dve pomični hitrosti: 4,5-9 m/min Dimenzije stroja: 1560 x 1280 x 1920 mm Teža: cca 1100 kg

Stanje: rabljeno, Širokopasovni brusilni stroj SCM UNO RCS - rabljeno - Kombinirani agregat s kontaktnim valjem in brusilnim čeveljcem, Kontaktni valj iz jekla, Kontaktni valj oblečen v gumo, Oscilacija brusnega traku, Podaljšanje vhodne in izhodne mize ----- Tehnični podatki ----- Ncedpfxey Dhuds Afmsu Delovna širina: 920 mm, Število trakov: 2 kosi, Velikost brusilnega traku: 930 x 1.525 mm, Hitrost podajanja: 4,5 / 9 m/min., Maks. debelina obdelovanca: 160 mm, Min. debelina obdelovanca: 3 mm, Premer odsesovalne cevi: 2x160 mm, Moč motorja: 11 kW, Dimenzije (DxŠxV): 1.700 x 1.480 x 1.600 mm, Teža: 1.175 kg

Stanje: rabljeno, Tehnični podatki: Delovna širina: 910 mm Njdpfx Afey R Snbemjcu 1 brusilni agregat Premer valja: 300 mm Višina obdelovanca: 160 mm Premer odsesovalnega nastavka: 160 mm Električno dviganje Analogni prikazovalnik višine Moč glavnega motorja: 9 kW Napetost: 380 V Skupne dimenzije: Dolžina: 1800 mm Širina: 1500 mm Višina: 2150 mm

Stanje: zelo dobro (rabljeno), Širokopasovni brusilni stroj SCM SANDYA uno Ncsdpfjy S Rxbjx Afmeu širina brušenja: 900 mm, 1 kombinirana enota z kovinskim valjem, pritiskalna stopalka motor 7,5 kW, zagon zvezda/trikot, dve hitrosti podajanja, električna nastavitev mize, digitalni prikaz položaja mize, oscilacija brusilnik je v zelo dobrem stanju, pripravljen za delo, Mere stroja: širina 150 cm, dolžina 160 cm, višina 180 cm, Teža cca 750 kg.

Stanje: zelo dobro (rabljeno), Solo Machine - Universal Machine (first & second in a processing line) Second DEP in the line X10023 Electronic Control: OMRON Separate control cabinet and operator console Safety and soundproof enclosure No. 3+3 vertical support columns for work groups As the second machine, it processes panels with a depth of 1900 mm Nodpfxsyz Si He Afmocu Min. useful working width (mm): 300 Max. useful working width (mm): 2500 Min. useful working thickness (mm): approx. 6 Max. useful working thickness (mm): 60 Cam distance (mm): 400 Adjustable feed speed (min/max) (m/min): 4-24 Total power: 65 kW No. 3 working units (for each machine side): - No. 1 universal milling unit (electro-pneumatically operated), spindle length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electro-pneumatically operated), spindle length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electro-pneumatically operated), spindle length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) NOTE: These three vertical universal milling units are CNC-controlled with horizontal and vertical adjustment. - Spare slot