Schuko Stiskalnica Za Briketiranje nakup rabljenega (84.807)

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% Itodjd Nm Siopfx Ab Aog - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Itodpfjgl Nlmox Ab Aog Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Itedpfxov Rpxlo Ab Aog Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults Itsdpfx Abexfwdo Aeg + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: Itedpfx Ajfci D Ajb Ajg -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h Itodpegfm Rysfx Ab Aog *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: dober (rabljeno), Good, used condition Main motor: 11 kW Itedpfx Ajt Hxudeb Aog Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / Technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Functionality guaranteed upon handover

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke Izjemno visok pritisk stiskanja: 3.700 kg/cm² Velik lijak: 600 x 1500 mm Format briketa: 60 x 40 mm Zmogljivost: Aluminijevi ostružki – do 70 kg/h Jekleni ostružki – do 180 kg/h Itedew Ig Suspfx Ab Aog Medeninski ostružki – do 220 kg/h *odvisno od vhodnega materiala in nastavitev Vključeno: - Kad za emulzijo - Črpalka za emulzijo - Oljni hladilnik

Stanje: dober (rabljeno), Tehnični podatki: Briketirni stroj v dobrem stanju Letnik: 2007 Tehnični pregled v 06/2025 Cilindrična briketa 80 mm Pretok do največ 150 kg/h *le približno 3.949 delovnih ur - Hidravlična preša: briketirni stroj z izmetno stezo - Hidravlična enota: 4 kW - Tlak: maks. 300 bar - Transportne dimenzije: 1585/2140/H1940 mm - Teža: 1370 kg Garancija delovanja ob prevzemu Z veseljem omogočamo brezplačen preizkus! Itjdpfx Ajwtdk Tjb Ajg

Stanje: dober (rabljeno), Refurbished Used Machine Base machine starting from: €147,700 net *Options available at additional cost, see below Itodpfj E Dquex Ab Aeg with full 1-year warranty Ready for delivery approx. 16 weeks after order Technical Data: Throughput capacity up to max. 1,200 kg/h, depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kW Compactor screw 2 x 5.5 kW Distribution screw 2.2 kW Hydraulic pump motor 0.37 kW Total connected load 65 kW Control panel with plain text display for operating status and load indicator for main drive and feed screws PLC control Siemens S7/300 with hour meter in control cabinet Machine carries CE marking Automatic start/stop function Dimensions 3,100 x 860 x 1,800 mm (L x W x H) Weight 4,500 kg Options: Silo for MAP series (suitable only for one MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and fill level sensor. €19,700 net plus VAT. - Temperature control unit for the press tools Ensures optimal briquette quality by maintaining required temperature. Temperature controller for pump, cooling unit, ventilator, pressure switch Ready-wired — mandatory for operation including corresponding control unit €7,850 net - Guillotine for cutting briquettes to length Compressed air connection required on site €6,940 net plus VAT - Conveyor line / cooling section (nominal: 4 x 2 m) Per 2 metres, €990 net Installation / Commissioning (nominal for each press approx. 2–3 days onsite) By effort, invoiced separately according to the following rates: Service technician / mechatronics per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday or night hour: 50% surcharge Each Sunday and holiday hour: 100% surcharge Allowance per fitter per day: country dependent Per car and transporter km: €0.98/km Travel and accommodation billed according to receipt or flat rate, at purchaser’s expense. Testing with customer’s own material (by prior arrangement, up to max. 750 kg) — €1,970 net flat rate --- Requirements for raw material: - Moisture content (atro) must be between a minimum of 6% and a maximum of 18% - Chip length max. 20 mm - Installation temperature: heated area with at least +5°C - Feeding material must be free from metals and mineral contaminants. Damage to the press tools and/or increased wear may result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation Itodod Nnwlepfx Ab Aog + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 29 h, Another machine available immediately, ex works Neckartailfingen *Subject to prior sale *Round silo available at additional cost Press only deliverable with an additional plant component, such as chipper, granulator, hammer mill, screw conveyor, belt conveyor with overbelt magnet, or extraction system RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Type Classic – throughput up to 425 kg/h *material dependent Options for an extra charge – plant engineering / mütek Systemtechnik: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary airlocks - Screw conveyors - Silos - Control system integration of all types - Semi-automatic packaging technology Your benefits: Key point: + Highly established, mature die-press thanks to 25 years of experience. The challenge and expertise are in the details, e.g. use of top-quality valves and cylinder seals. + Suitable for 24h operation + Long service life + Low maintenance costs + Compact design + High energy efficiency due to innovative hydraulics Technical data – Briquetting press: Throughput: up to 425 kg/h* *depending on the bulk density of your input material *based on a bulk density of 200 kg per cubic meter Exact information available after successful test with your material. If no test material is provided, we cannot guarantee briquette quality or throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Hydraulic main compressor Pressing pressure: up to approx. 1700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual control of all cylinders Control cabinet "dust protected" with PLC control and touch display Total power consumption of the briquetting press: approx. 33 kW Itodpfsfhql Tjx Ab Asg Raw material requirements: - Moisture content (atro) must be min. 6% to max. 15% - Maximum chip size: 20 x 2 x 2 mm - Ambient temperature at installation: minimum +8° C - Material feed must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Stanje: dober (rabljeno), Leto izdelave: 2001, Dobre ohranjeno, rabljeno stanje Malo delovnih ur (1675 h) Motor: 11 kW Tlak: nastavljiv do največ 250 barov Pretok do največ 220 kg/h Briket: 150x60 mm Iedpfewcc D Rsx Ab Astg Dimenzije stiskalnice: pribl. 2200x3000x1920 mm (D x Š x V) Dimenzije krmilne omare: 500x1250x2120 mm (D x Š x V) Teža pribl. 3000 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, obratovalne ure: 21.000 h, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2024, vrsta zaščite (IP koda): IP54, Stiskalnica za brikete RUF 400 CELOVITA LINIJA ZA BRIKETIRANJE NA VOLJO ZA NAKUP: Bobnasti sušilec za žagovino Vijak za podajanje Tračni transporter – 2 kosa Separator s lijakom Polžasti transporter – 6 kosov Skladiščni zalogovnik za mokre žagovine Zalogovnik za gorivo Kotlovnica na lesne odpadke Drogalnik lesnih odpadkov Izvlečni ventilator s ciklonom Pakirni stroj s kompresorjem Dodatne fotografije in informacije so na voljo ob resnem povpraševanju. Itodpjxu Ryujfx Ab Ajg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior, however, both the motor and the hydraulic pump are larger, and the electrical system is more advanced. General features: - Robust construction - Very easy to operate and economical in operation - Simple maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Low oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Wiring diagram - CE marking - Operating manual Technical data: - Motor power: 7.5 kW, connection value 400 V, 50 Hz - Number of pressing cycles per minute: 14 - Capacity: 60 – 100 kg/h (depending on material) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Oil tank volume: approx. 180 litres - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Incl. approx. 2 m briquette discharge pipe Used machinery notice: Isdpfxowyc H Te Ab Aotg • Subject to technical changes and prior sale. • Prices stated are ex-works, loaded free of charge at location! • The machine has been cleaned and function-tested. • All machines are sold as inspected without any warranty. Buyers are welcome to inspect the machine at our site. • Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Stanje: novo, Leto izdelave: 2025, Performance: 10 - 25 kg/h Briquette size: 30 mm x 30 mm cube Hopper capacity: 0.33 m³ Dimensions: 1300 mm x 740 mm x 1200 mm (L x W x H) Power consumption: 2.2 kW Machine length: 1300 mm Machine width: 740 mm Machine height: 1120 mm Ijdpfxjk Utqve Ab Astg Weight: 233 kg

Stanje: novo, Leto izdelave: 2025, Output: 40 - 100 kg/h Itedpjknyhpefx Ab Asg Briquette diameter: 60 mm Briquette length: 40 - 70 mm Automatic start: yes Oil preheating system: yes Max. material moisture: 15% Container diameter: 1000 mm Dimensions: 1850 mm x 1170 mm x 1510 mm (LxWxH) Motor power: 7.5 kW Control cabinet: with Siemens PLC and touch screen Weight: 770 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Felder Clean Air Extraction Unit | Dust Extraction System RL 200 | Ø 200 mm Maximum air flow: 4000 m³/h Rated air flow: 20 m/sec, 2300 m³/h Negative pressure: 2380 Pa Filter surface area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput capacity: 30–50 kg/h Motor power: 4 kW Itedjwa Rlkspfx Ab Ajg Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil volume: 125 litres Year of manufacture: 2016 Condition: ready for operation Price: 15,500.- The system has already been dismantled and is stored at the Raasdorf warehouse.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Premer briketa: 40 mm Priključna moč: 4 kW Tlačna zmogljivost/kapaciteta na uro: odvisno od materiala Velikost posode: 1.044 x 1.044 mm Krmiljenje SPS Velikost hidravličnega rezervoarja: 100 l Itsdsvptrtepfx Ab Ajg Nova razstavna naprava z 5 delovnimi urami

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer briketa: 50 mm, skupna masa: 340 kg, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, kapaciteta rezervoarja za olje: 60 l, stiskalna sila: 8 t, obratovalni tlak: 270 letvica, Oprema: hladilna enota, Hidravlična briketirna stiskalnica z glavnim motorjem 4 kW. Briket premera 50 mm. Kapaciteta: 30-50 kg/uro. 50-litrski rezervoar, oljni hladilnik. Itedpfx Aef Hmi Ejb Ajg

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 700 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3617, Model/Tip: RUF 15/4000/70 Št. številka: 3617 Leto izdelave: 2023 Pogonski motor: 15 kW Itsdpfot Sgrzox Ab Aog Zmogljivost do max.: 450 kg/h (odvisno od materiala) Pritisni tlak: ca. 4000 kg/cm² Oblika briketa: 70mm Delovne ure: ca. 700 ur Garancija: 12 mesecev po dobavi Razpoložljivost: ca. 8 tednov po prejemu avansa Podrobnosti: + Siemens TP 700, Siemens S7-1200 + Podaljšek lijaka z mrežo + Električna emulzijska črpalka + Pršilna naprava + Pregledna vrata v lijaku

Stanje: novo, Leto izdelave: 2023, Output capacity: 15 - 70 kg/h Iodpfxok Utq Do Ab Astg Briquette diameter: 60 mm Automatic start: Yes Oil preheating system: Yes Material moisture: max 15% Container size: octagonal, diameter 750 mm Hopper height: Dimensions: 1500 mm x 900 mm x 1065 mm (L x W x H) Motor power: 5.5 kW Control cabinet: electronically controlled via PLC Weight: 450 kg

Stanje: novo, Leto izdelave: 2025, Performance: 40 and 60 kg/h Automatic Start: Yes Oil Cooler: Yes Briquette Size: 50 mm diameter Isdowhuulopfx Ab Aotg Briquette Length: 35 mm Hopper Capacity: 0.38 m³ Power Consumption: 5.5 kW Machine Length: 1860 mm Machine Width: 890 mm Machine Height: 1100 mm Weight: 400 kg

Stanje: novo, Leto izdelave: 2025, Performance: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Hopper capacity: 0.38 m³ Iedpfepfatpex Ab Aetg Power consumption: 4 kW Machine length: 1,860 mm Machine width: 890 mm Machine height: 1,100 mm Weight: 400 kg

Stanje: novo, Leto izdelave: 2023, Output: 15 - 55 kg/h Briquette diameter: 55 mm Container size: octagonal, diameter 750 mm Hopper height: Dimensions: 1500 mm x 900 mm x 1065 mm (L x W x H) Motor power: 4 kW Itjdpfxok Utqyj Ab Aog Control cabinet: electronically controlled via PLC Weight: 450 kg