Schröder Proizvodna Linija Za Parket nakup rabljenega (84.662)

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7816 TECHNICAL DATA DDCA - Maximum plank length: 85 mm - Minimum plank width: 180 mm - Maximum plank width: 845 mm - Minimum plank thickness: 10 mm - Maximum plank thickness: 45 mm - Spindle diameter: 30 mm Lsdpfx Ajyyy Egol Ieab - Maximum saw blade diameter: 250 mm - 5 spindles: - Left side: 1) Vertical upper spindle 2.2 kW 2) Horizontal lower spindle 2.2 kW - Right side: 1) Vertical lower spindle 2.2 kW 2) Vertical upper spindle 2.2 kW 3) Horizontal lower spindle 2.2 kW - Spindles adjustable up/down, left/right - 2 material pressure rollers - Infinitely variable feed speed: 0–10 m/min - Spindle diameter (5x): 100 mm - Dimensions (L/W/H): 1870/2230/1320 mm DDGA - Maximum plank width: 130 mm - Maximum plank thickness: 100 mm - Spindle configuration: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - 6-knife heads mounted on upper and lower spindles - Spindle diameter: 40 mm - Moulding cutters mounted on right and left spindles, max diameter: 50 mm - Spindle diameter: 30 mm - 2 feed speeds: 4.9 kW - Central chain lubrication via oil pump - Spindle diameter (4x): 125 mm - Dimensions (L/W/H): 3100/1300/1700 mm ADVANTAGES - Made in Poland - 5 spindles - Not repainted - Very good condition - Used production line - High quality, low price Net price: 52,900 PLN Net price: 12,600 EUR Net price calculated at 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Stanje: zelo dobro (rabljeno), Catalogue number: 7817 TECHNICAL DATA DDCA – Double-End Tenoner - Minimum slat width: 180mm - Maximum slat width: 850mm - Minimum slat height: 10mm - Maximum slat height: 45mm - Spindle diameter: 30mm Lajdpfx Aeyz Nr Sol Ieb - Maximum blade diameter: 250mm - 4 blades included 5 spindles: Left side: - 1) Vertical upper 2.2kW - 2) Horizontal lower 2.2kW Right side: - 1) Vertical lower 2.2kW - 2) Vertical upper 2.2kW - 3) Horizontal lower 2.2kW - Spindles adjustable up/down, left/right - Material hold-down: 2 pcs - Stepless feed speed adjustment: 0–10m/min - Central lubrication via oil pump - Pump motor: 2.2kW - Extraction port diameter: 5x100mm - Dimensions (LxWxH): 1900x2230x1530mm DDGA – Four-Sided Planer - Maximum slat width: 130mm - Maximum slat height: 10–60mm - Minimum workpiece length: 200mm Spindle arrangement: - 1) Bottom 5.5kW - 2) Right 5.5kW - 3) Left 5.5kW - 4) Top 5.5kW - Spindles adjustable up/down - Top & bottom spindle diameter: 40mm - Right & left spindle diameter: 30mm - 4 feed speeds: 13/20/26/40 m/min - Central chain lubrication via oil pump - Extraction port diameter: 4x120mm - Dimensions (LxWxH): 3200x1370x1830mm DBCA – Tenoner Feeder - Maximum feed speed: 40m/min - Maximum slat width: 150mm - Motor: 0.55kW - Overall dimensions (LxWxH): 2320x600x1150mm DBGA – Strip Feeder - Strip length: 200–600mm - Strip width: 30–120mm - Strip thickness: 10–40mm - Stepless feed speed adjustment: 10–40m/min - Motor: 0.75kW - Overall dimensions (LxWxH): 1500x500x980mm - Total weight: approx. 4900kg – Manufactured in Poland – DTR documentation included – 5 spindles – Unpainted – Very good condition – Used machine Net price: 63,900 PLN Net price: 15,200 EUR based on 4.2 EUR exchange rate (Prices may change with higher rate fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to identify the goods. We only resell products that have already been placed on the market by the manufacturer. We have no business connections with the manufacturer.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.000 mm, skupna širina: 1.250 mm, skupna višina: 2.000 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, moč: 40 kW (54,38 KM), premer žaginega lista: 450 mm, širina obdelovanca (maks.): 300 mm, višina obdelovanca (maks.): 30 mm, zračni tlak: 6 letvica, premer povezave za izpihovanje: 200 mm, premer honanja: 125 mm, število vreten: 2, MARINUS PROMAX – Endenbearbeitungs- und Defektsägemaschine Die Maschine entspricht den folgenden Spezifikationen: • Robuste und schwere Bauweise, Abmessungen LxBxH = 2080x1260x2000 mm. • Durchlaufzuführung mit präziser Positionierung (Servo-Antrieb). • Pneumatische Seitenanschläge für garantiert rechtwinklige Bearbeitung. • SPS-Steuerung. • Bedienung über Terminal. • Modem für Fernprogrammierung. • 2 Servomotoren für maximale Dynamik. • 2 Sägemotoren (3,0 kW). • 2 Hochgeschwindigkeits-Fräsmotoren mit Frequenzumrichter (je 7,5 kW / 200 Hz / n=12.000). • 1 Getriebemotor mit Frequenzumrichter. • 2 Trommelmotoren. • 26 pneumatische Zylinder mit Ventilen. • 1 Lumineszenzsensor • 6 Induktivsensoren • Bandförderer für Abfall, Höhe 1,3 m. • Maschine komplett durch Sicherheitstüren gekapselt. • Maschine gemäß CE-Vorschriften. Längenmesssystem: Ein Längenmesssystem zeigt während der Produktion die Gesamtlänge und die Quadratmeter der Bretter am Display an. Werkzeugausstattung: Optional können wir Werkzeuge (Nut und Feder) mit Wendemessern sowie zwei Kappsägeblätter für die Maschine anbieten. Standardprogrammierung: Die Maschine verfügt über zwei Hauptprogramme: 1. Endenbearbeitung Laedpeq Auhdsfx Al Isb 2. Zuschnitt Beide Hauptprogramme beinhalten zwei Unterprogramme: 1. Variable Längen: Defekte werden ausgeschnitten, Endprodukte haben variable Längen. 2. Feste Längen: Bretter werden in einer festen Länge produziert, die Einfuhrlänge darf maximal +200 mm Übermaß betragen. Defekte können hierbei nicht ausgeschnitten werden. • Min. Breite: 60 mm • Max. Breite: 300 mm • Min. Länge: 500 mm • Max. Länge: 6000 mm • Min. Stärke: 10 mm • Max. Stärke: 30 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2023, 2/3-layer parquet profiling line Min/max width: 80-400 mm Min/max length: 500-3000 mm 4+4 motors per side Lsdjlaxinopfx Al Ieab Line overhauled to as-new condition, with warranty. Possibility to customise the machine according to customer requirements.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Automatic continuous gluing and pressing line for 2-3 layer parquet. Laodpfx Alsggflce Ieb

Stanje: rabljeno, Parquet mosaic production line, length 160 mm: 1. Schroeder MTA-2 PE Mosaic Press, year 1992, 7.3 kW Ledpstp I Hcjfx Al Ieab 2. Schroeder PST Feeder, year 1992 3. Schroeder SB35 B Feeder, year 1992 4. Schroeder BA-2 Feeder, year 1992 5. Schroeder BA-2 Feeder, year 1992 6. Schroeder SB35 B Feeder, year 1992 7. WENIG GMBH P 120 Double-sided Edging Machine 8. WENIG GMBH P121 Thicknesser with cutters (not planing heads) 9. WENIG GMBH P122 Multi-rip Saw 10. WENIG GMBH 135 Sorting System – sorting system for 3 grades with interchangeable magazines (containers) Magazines: 200 pcs.

Stanje: dober (rabljeno), Leto izdelave: 2000, Schroeder Mosaic Press 160 mm. Bonding patterns – brick/bond (English pattern) panel 640x274 mm and halves 640x137 mm, bonded in 6 variants: Lodpjr Iyvbefx Al Ioab - single brick, offset 50% - double brick, offset 50% - triple brick, offset 50% - single brick, offset 25% - double brick, offset 25% - triple brick, offset 25%

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, delovna širina: 400 mm, trajanje garancije: 12 meseci, moč: 15 kW (20,39 KM), Hiter in učinkovit UV sušilni tunel za olja in lake. Omogoča takojšnje utrjevanje in trpežen, visokokakovosten zaključek. Opremljen z nastavljivimi UV-svetilkami (50–100 %) in toplotno ter UV-odpornim mrežastim trakom iz INOX-a. Tip in konfiguracija svetilk (živosrebrne ali galijeve, po 5 kW) po dogovoru. Ledpfxsxuibke Al Ieab Pred prodajo je stroj popolnoma očiščen, servisiran in preizkušen.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 700 mm, skupna širina: 2.000 mm, skupna višina: 1.350 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 380 V, delovna širina: 1.300 mm, Model DRM ponuja najbolj ekonomičen enovaljni valjčni premazovalnik za manjša ali zagonska podjetja, ki želijo oljiti lesene talne deske. Stroj je posebej zasnovan za nanašanje olja in lepila. Stroj je popolnoma delujoč in brez funkcionalnih napak. Priloženi sta dve novi posodici za lepilo. Ljdpfsxdxf Rsx Al Ioab Za ponudbo nas kontaktirajte ali obiščite naš preizkusni center za brezplačno demonstracijo.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, obratovalne ure: 8 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 700 mm, skupna širina: 2.000 mm, skupna višina: 1.350 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 380 V, delovna širina: 1.300 mm, Model DRM ponuja najbolj ekonomičen enovaljni nanašalnik za manjša ali novoustanovljena podjetja, ki želijo oljiti lesene talne deske. Ta stroj je zasnovan posebej za nanašanje olja in lepila. S samo 8 delovnimi urami je stroj praktično kot nov. Laedoxdxabjpfx Al Ieb Za ponudbo nas kontaktirajte ali obiščite naš Testni center za brezplačno predstavitev.

Stanje: rabljeno, Leto izdelave: 2010, številka stroja/vozila: LC625, Used ALFA LAVAL S16 Olive Oil Line – Year of Manufacture 2010 Technical Specifications & Performance Data This complete olive oil extraction line combines proven components to ensure continuous, efficient processing of olive paste into high-quality oil. Designed around Alfa Laval core technology and complementary equipment, it offers industrial throughput capacities with reliable separation and thermal conditioning. Capacity: 2.5–3 t/h (tonnes per hour) olives Year of Manufacture: 2010 Main Manufacturer: Alfa Laval Decanter: Alfa Laval S16 Separators: Alfa Laval 507 (2 units, with support frame) Crusher: Alfa Laval, 25 HP Lajdpfx Asy Iz Tusl Ieb Washing Unit: Santoro washer with destoner Malaxer: 4 units, stainless steel, 500 L each, independent discharge Paste Pump: Bellin, stator size 16 Inclined Conveyor (Belt): Alfa Laval Screw Conveyor (Pomace conveyor): Officine Mottola Thermal Unit (Boiler): D’Alessandro Termomeccanica CS 130, rated at 130 kW Heat Exchanger: Hot water heat exchanger for thermal conditioning Control Panels: Main power cabinet and dedicated pump control cabinet Electrical Data (Boiler): 380 V, 50 Hz, power consumption 0.42 kW Standards: CE components; boiler EN 303-5 class 3 Advanced Automation & Control Systems The line features central power distribution via a main cabinet and a dedicated pump control cabinet for modular plant control. Operators benefit from straightforward management of feeding, crushing, malaxing, decanting and separation stages. Safety interlocks and standard guarding on rotating parts and hot water circuits ensure consistent, safe operation. Quick mechanical adjustments allow fine-tuning of malaxing time and temperature settings for optimal extraction output and product quality. Integration Options in Production Lines Designed for continuous extraction, this used processing plant integrates upstream reception and washing with downstream decanting and polishing. Inclined conveyor, washer/destoner, and crusher provide uniform paste preparation, while decanter and dual separators deliver oil of high clarity. The system can be linked to storage tanks, filtration skids, or a used edible oil bottling line to enable complete industrial packaging processes. Flexible piping and standard connections simplify integration into existing food and beverage production plants. Machine Condition & Maintenance History This is a complete, used olive oil extraction line offered in working condition; core process equipment dates from 2010. Components from leading manufacturers such as Alfa Laval, Santoro, Bellin, Officine Mottola and ...

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, LISEC PVB laminacijska linija Sestavljena iz: Avtoklav TERRUZZI – Leto 2007 Pralni stroj LISEC HVM26B6 – Leto 2015 Čista soba (White Room) Mangel Ledjy I Sd Repfx Al Ieab Dimenzije 5500x2800 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Sestava vključuje: - Glavni ekstruder: BA130 (Cobra), letnik 2008 - Koekstruder: CM65, letnik 2008, prodaja za dele - Embosser, hladilna kad, zabijalec žebljev, vlečni stroj, perforator, giljotina – vsi letnik 1996 TEHNIČNI PODATKI – Ekstruder BA130 (Cobra) - Glavni polž: Ø130 mm, dolžina 26 L/D - Razmak osi: 1050 mm - Material polža: XALOY 41CrAlMo7, trdota 1000 HV - Menjalnik: 1:31:7 R - Potisni ležaj: 2 020 000 N - Grelniki valjev: 74,6 kW (7 grelnih območij, 6 hladilnih) Lasdpsyc Rtxefx Al Iob - Glavni motor: 205 kW, 1460 obr./min - Izsesavanje: črpalka 4 kW, 100 m³/h, vakuum 700 Hg - Podajalniki: 2x motor 2,2 kW, prenos 1:25:4 R, hitrost polža 112 obr./min Tehnično stanje: Linija deluje, pripravljena za proizvodnjo Konfiguracija omogoča celoten proces proizvodnje fasadnih oblog – od granulata do končnega profila Možna individualna ocena in ogled stroja na lokaciji.

Leto izdelave: 2024, stanje: zelo dobro (rabljeno), – Moč – 3,5 kW – Upravljanje – PLC krmiljenje – Ena delovna enota – Izhodna miza – 15 m (možnost nadgradnje) – Premer bloka – 300 mm Ljdpfx Ajyx E Hajl Ieab – Razpon premera žice – 1,8 – 3,2 mm – 1550 N/mm² – Premer obroča – 300 – 420 mm – možni tudi drugi premeri obročev – Kapaciteta – 52,5 m²/8h za mrežo z naslednjimi lastnostmi: Premer obroča 350 mm – 9 ovojev Premer žice – 3 mm Dimenzije mreže – 10 x 5 m – Dimenzije mreže – 10 x 5 m (možno daljše, odvisno od končne teže mreže) – Moč – 3,5 kW (celotna linija) – Število delavcev – 1 na izmeno

Leto izdelave: 2004, stanje: rabljeno, Hardcover-Buchfertigungsstraße Kolbus BF 527 Baujahr: 2004 - Automatische Einstellung - Co-Pilot mit Touchscreen - Produktzähler - Buchmesstisch - Sternanleger - Vorheizgerät (heiße Luft) - Runden- und Abpressstation - Leimwerk - Ohne Gazestation - Lesebandansaugevorrichtung - Leimwerk - Kapital- und Hinterklebestation - Pressstation - Einhängestation - Deckenvorstapelband - Deckenbiegestation - Deckenformstation - Kaltleim-Rückenbeleimungspumpe Falzniederdruckpresse Kolbus FE 604 - Co-Pilot mit Touchscreen - Automatische Einstellung - Einlauf von rechts - Integrierte Hydraulik - Heizungsüberwachungseinheit - Geradeausauslage Buchstapler Laodsx Dkk Sepfx Al Ieb Kolbus DS 391 - Kompensierender Buchstapler - Geradeausauslage

Leto izdelave: 2000, stanje: rabljeno, številka stroja/vozila: 1660, Proizvodna linija za sendvič panele / manipulator portal Lewecke Na ovoj liniji je proizveden sledeći proizvod (drugi proizvodi su mogući): Sendvič elementi / sendvič ploče sa jezgrom od stiropora, spoljašnji sloj aluminijum debljine 0,5 – 0,8 mm, unutrašnji sloj tvrda vlaknasta/šperploča debljine 1,8 – 2,3 mm. Maks. dimenzije: 2500 mm x 8000 mm Maks. ukupna debljina: 30 mm Maks. težina: 50 kg Proizvodna linija se sastoji od: 1. Transportna traka 2. Valjkasta presa 3. Ulazna valjkasta staza za okretač ploča 4. Izlazna valjkasta staza za okretač ploča 5. OMMA – mašina za nanošenje lepka (Hot-Melt), valjkasta mašina HGS_H 327, godina proizvodnje 2020 6. Transportna traka 7. Valjkasta presa Lajdjyztygspfx Al Iob 8. Prostorijski portal + 2 mesta za pripremu limova/gornjih slojeva, vakuumski transportni sistem dimenzija D/Š/V 20.000mm/8.000mm/4.000mm Alternativno se može prodati zajedno sa vertikalnim skladištem za ploče, vidi zaseban oglas.

Leto izdelave: 2015, stanje: rabljeno, Prodaja proizvodne linije za W in C profile Namenjena je proizvodnji cestnih ograj, stebričkov in pritrditvenih elementov. Popolnoma opremljena linija, primerna za neprekinjeno industrijsko proizvodnjo. Linijo sestavljajo: • Dva odvijalca • Linija za izdelavo stebričkov • Linija za izdelavo parapetov • Dva stiskalnika za izdelavo pritrditvenih elementov Tehnične specifikacije: • Dolžina: 17 m • Širina: 1 m • Višina: 1 m • Moč motorja: 22 kW • Teža: 18 t • Leto izdelave: 2015 • Proizvajalec: Chengxing Machinery (Kitajska) Namen in prednosti: Ta proizvodna linija za W in C profile je primerna za proizvodnjo različnih varnostnih elementov za ceste: zaščitnih ograj, podpornih stebrov in pritrditvenih delov. Oprema zagotavlja zanesljiv, stabilen in dosleden proizvodni proces. Naprava je pripravljena za ogled. Za več informacij smo vam na voljo. Ledpfxsxhf R Is Al Isab

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: 105554, We offer this used Weinig Conturex window production line, year of manufacture 2006. Machine number: 105554 Machine type: Conturex Year of construction: 2006 Wiring diagram number: FP 3013 Ledpfx Aloyu Sn Uo Ijab Supply voltage: 3×400 V Supply frequency: 50 Hz Control voltage: 230 V Control frequency: 50 Hz Auxiliary voltage: 24 V Auxiliary frequency: 0 Hz Main fuse: 139 A Current capacity: 160 A Power: 61 kW If you have any questions or require further information, please send us a message or contact us by phone. CNC machining centre for the processing of wooden profiles (windows, doors, etc.). Additional linear tool magazine (120 positions). 2 four-axis working heads for simultaneous machining (20kW each). Automatic loading and unloading tables. Optionally, a comprehensive tooling package is available (tool holders, angle aggregates, profiling heads). The machine is currently in continuous operation. The machine was purchased in 2024 after a complete overhaul. Since then it has been running for 15 months on a single shift. Technical data: Working ranges: Minimum width: 25 mm Maximum width: 260 mm Minimum height: 10 mm Maximum height: 150 mm Minimum length: 180 mm Maximum length: 4500 mm The maximum working length can be achieved by multiple re-clamping of the element. Milling spindle no. 1: Number of axes: 4 Motor power S1: 20 kW Motor speed range: 0–18,000 rpm Rotation directions: Right / Left C-axis: Yes Feed rates: - Z-axis: 60 m/min - Y-axis: 120 m/min - C-axis: 450°/s Hand tool changer for milling spindle no. 1: - Type: disc - Capacity: 18 tools - Tool holder spacing: 100 mm - Maximum single tool weight: 10 kg - Maximum total tool weight: 130 kg - Tool holder type: HSK F 63 Milling spindle no. 2: Motor power S1: 20 kW Motor speed range: 0–18,000 rpm Rotation directions: Right / Left C-axis: Yes Feed rates: - Z-axis: 60 m/min - Y-axis: 120 m/min - C-axis: 450°/s Hand tool changer for milling spindle no. 2: - Type: disc - Capacity: 18 tools - Tool holder spacing: 100 mm - Maximum single tool weight: 10 kg - Maximum total tool weight: 130 kg - Tool holder type: HSK F 63 External tool magazine: - Type: linear - Capacity: 120 tools - Tool holder spacing: 80 mm - Tool holder type: HSK F 63 Loading table: automatic cross-feed Unloading table: automatic cross-feed CNC control: PLC control: Siemens S7 Mobile control panel. Controller: - Operating system: Microsoft Windows - Modem for data transfer and diagnostics - Touchscreen Siemens Sinumerik 840 D Number of axes: 4 Machine is fully operational and currently in continuous production. At extra cost, the following equipment packages are available: 8 angle aggregates, 3 standard toolholder packages, 17 new spindle packages for heads.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, OMAG TRONIC 140/120 kompletna linija, velikost proizvodne palete 1450-1100, stroj z dvojnim polnjenjem, letnik 1993, regalni voziček z obračanjem, prepakiranje z bandiranjem, 10 kompletov kalupov, upravljanje Siemens S7. Ljdpfxsxl D Ims Al Isab

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Proizvodna linija Weinig CONTUREX C 125, letnik 2018 Ledey Emrkjpfx Al Ijab

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: nepreverjeno, številka stroja/vozila: YF-240, vrsta vhodnega toka: Klimatska naprava, Oprema: dokumentacija / priročnik, V letu 2022 smo kupili novo proizvodno linijo, vendar se je poslovna usmeritev spremenila, zato linija ni bila nikoli razpakirana iz kontejnerjev. Linija je shranjena v treh kontejnerjih 40HQ in enem kontejnerju 20GP. Proizvodna zmogljivost: 220–300 kg/uro WPC proizvodna linija je namenjena proizvodnji izdelkov iz lesno-plastičnega kompozita, kot so WPC podi, WPC podboji za vrata, zaključne letve ipd. Z menjavo polžnega valja in orodij je možno proizvajati tako PE/PP kot PVC tip WPC izdelkov. Značilnosti WPC proizvodne linije: Ledpfx Aoxb R Aijl Isab - uporablja dvostopenjski proizvodni postopek: najprej zmešavanje in granulacija, nato ekstruzija - vgrajen bimetalni polžni valj, visoka trdota in dolga obraba - uporablja paralelni dvopolžni ekstruder za zmešavanje in peletiranje, kar omogoča dobro odzračevanje in boljši plastični učinek Vse tehnične specifikacije so na voljo v prilogah.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, Αυτή η προσφορά αφορά μια πλήρη γραμμή παραγωγής για την κατασκευή αφρού καουτσούκ και EVA. Προσφέρεται από κορυφαίους κατασκευαστές μηχανημάτων, όπως οι γερμανικές Fecken Kirfel και Wesero, οι ιταλικές Moderne Meccaniche, Mapelli, Terenzio και Vigevano, οι ταϊβανέζικες Kim Ho Sheng και DAH TYAN, καθώς και ελληνικές εταιρείες. Η γραμμή παραγωγής περιλαμβάνει μια σειρά από μεγάλες βιομηχανικές μηχανές εξοπλισμένες με πλατφόρμες, πίνακες ελέγχου, μεταλλικούς κυλίνδρους και εξαεριστήρες. Οι μηχανές είναι κυρίως βαμμένες πράσινες και διαθέτουν εμφανή μπλε μοτέρ, ενώ η πρόσβαση στα υψηλότερα σημεία παρέχεται μέσω σκαλών. Πίνακες ελέγχου και ηλεκτρικοί πίνακες βρίσκονται στη δεξιά πλευρά ορισμένων μηχανημάτων για εύκολη διαχείριση της λειτουργίας. Η γραμμή παραγωγής περιλαμβάνει: - 1 Ιταλικό Banbury 40 λίτρων Moderne Meccaniche - 1 Ιταλικό ανοιχτό μύλο ανάμιξης Moderne Meccaniche - 4 ταϊβανέζικους ανοιχτούς μύλους ανάμιξης Kim Ho Sheng Industrial Co Ltd - 1 μεταφορική ταινία με αυτόματο σύστημα κοπής, ελληνικής κατασκευής - 1 μεγάλη ιταλική πρέσα βουλκανισμού Terenzio με 6 πλάκες - 2 μεσαίες ταϊβανέζικες πρέσες βουλκανισμού DAH TYAN HYDRAULIC MACHINE INDUSTRIAL CO., LTD με 6 πλάκες - 1 μικρή ελληνική πρέσα βουλκανισμού (MIEL) με 2 πλάκες - 1 γερμανικό μηχάνημα λείανσης καουτσούκ Wesero - 4 γερμανικές οριζόντιες μηχανές κοπής με μαχαίρι ταινίας Fecken Kirfel (2 K11 και 2 G1) - 1 ελληνική μηχανή κοπής σε λωρίδες - 1 ελληνικό μηχάνημα κοκκοποίησης (MIEL) - 1 ιταλική μηχανή θερμοδιαμόρφωσης Vigevano Lajdpfx Asyrbybol Ieb - 2 ιταλικές ημιαυτόματες διατμητικές πρέσες MAV-2 - Vigevano - Περίπου 100 καλούπια σιδήρου με επιχρωμίωση για καουτσούκ και EVA foam - 1 γερμανικό βιομηχανικό κοχλιοειδή αεροσυμπιεστή Boge C30 με δοχείο 1000 λίτρων και στεγνωτήρα Omega - 1 ελληνικό ατμολέβητα λαδιού 800 kg (PROODOS) - 1 ιταλικό καυστήρα Riello RL70 - 1 ελληνικό βιομηχανικό ψυκτικό συγκρότημα 174 Kw - 1 γερμανικό βιομηχανικό θερμαντήρα αέρα Wolf - 1 θάλαμο θέρμανσης - 1 γαλλικό μίξερ PVC Lancelin - 1 ελληνική ηλεκτρονική ζυγαριά δαπέδου 1.500 kg (LION ENGINEERING) - 1 γερμανική βιομηχανική αλουμινένια σκαλωσιά Krause 6 μέτρων - 4 ιταλικά μηχανήματα περιθωριοκοπής fgb - 10 ζυγαριές όλων των ειδών.

Leto izdelave: 2016, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MT-108/2016, We offer a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016, with very low operating hours. Lasdsyw Tmljpfx Al Isb Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of manufacture: 2015 Condition: used Category ID: 1059 Type: EPS/MW sandwich panel production line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacturing, stacking, and packaging of various types and sizes of sandwich panels with insulation infill. The line includes all necessary electrical circuits, hydraulic systems, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulation thicknesses of 60mm, 80mm, 100mm, 120mm, 150mm, and 200mm; - EPS wall panels with insulation thicknesses of 60mm, 80mm, 100mm, 120mm, 150mm, and 200mm; - MW (mineral wool) roof panels with insulation thicknesses of 80mm, 100mm, and 120mm; - MW wall panels with insulation thicknesses of 80mm, 100mm, and 120mm. Materials used in production: - 0.4–0.7mm x 1250mm pre-painted galvanized steel sheet - EPS 80 expanded polystyrene boards - MW mineral wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine units/equipment included in the sandwich panel production line: The EPS/MW sandwich panel line is a complex production line consisting of multiple machines and equipment, including: 2.1. Decoiler with trolley for outer sheet 2.2. Trapezoidal forming roller conveyor 2.3. Shearing knife for sheet cutting 2.4. Micro-corrugation roller conveyor 2.5. Edge closing roller conveyor for standard joint outer skin 2.6. Edge closing roller conveyor for hidden joint outer skin 2.7. Decoiler with trolley for inner sheet 2.8. Shearing knife for sheet cutting 2.9. Micro-corrugation roller conveyor 2.10. Edge closing roller conveyor for inner skin 2.11. EPS/MW insulation material dosing unit 2.12. Conveyor belt for insulation material transport 2.13. Trimming knives for EPS/MW insulation material 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive dispensing unit 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller output table 2.21. Stacking and flip-over device 2.22. Transfer trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us by phone.

Stanje: rabljeno, HESS RH500 1998 nadzorna plošča 2 kalupa hidravlika Laedpsyx Hx Rsfx Al Iob transportni trak

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Line for the production of circular and square/rectangular tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Other diameter ranges can be achieved by manufacturing an appropriate set of forming rolls. The tube or closed profile is formed by rolling a steel strip of suitable width and thickness using a series of rollers, followed by TIG welding. During production, it undergoes multiple processing operations, including: a) weld (seam) grinding b) calibration c) straightening d) cutting The finished product—"raw tube"—is subject to further processing to obtain the required surface finish. There are two methods for surface treatment: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube mill is equipped with automated TIG welding from SAF: a) 2 pcs Tricathode NERTAMATIC 300 TR TIG inverters b) 1 pc Tricathode NETRINOX TH 500 TIG inverter c) Welding of products with wall thickness 0.5 - 1.5 mm – torch E16 d) Welding of products with wall thickness 1.5 - 3.5 mm – torch E25 e) RETRISAF cooling system 1.1 Steel strip decoiler for supporting and unwinding coils 1.2 Forming stations: a) entry station Laodpfxjxmiirj Al Isb b) preliminary forming station c) main forming station 1.3 Welding segment – three-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – for cutting the product to required lengths Additional line equipment: 1.8 Four-station tube grinder Bossi Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Two-station tube polisher Bossi Type: CP 400-2U