Schelling Sistem Kotne Žage Za Delitev Plošč nakup rabljenega (95.237)

Stanje: zelo dobro (rabljeno), Für Platten mit den Maßen 5600 x 2600 (2700 mm), Dicke von 2 mm bis 60 mm - Nr. 2 Doppel-Deck-Zuführrollenbahnen, 1 x 6.000 mm lang und 1 x ca. 3.800 mm lang - Hydraulischer Hubtisch (ca. 5600 x 2700 mm) - System mit Gummirädern (11 oben + 11 unten) zum Andrücken und Zuführen der Platten - Fahrbare Traverse mit 45 Saugern und 5 Auflagearmen (zur Ausrichtung des Plattenstapels) - 1. Rückseitiger Schieber mit 11 Spannzangen Crjdpexvc Rzefx Adisf - Drehtisch (für 90°-Drehung der Platte) mit Kunststoffrädern - 1. Plattensäge AH8 580 - max. Schnittbreite 5600 mm (max. Sägeblattüberstand 165 mm) - Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) - Hauptsägesystem (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) - Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 - 150 - Fahrbare Quertraverse mit 7 Schiebergeräten für geschnittene Platten - Mit 4 Auflagearmen (zur Ausrichtung des Plattenstapels) und 3 motorisierten Ketten - 2. Rückseitiger Schieber mit 25 (27) Spannzangen/Greifern - 2. Plattensäge - max. Schnittbreite 2700 mm (max. Sägeblattüberstand 165 mm) - Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) - Hauptsägesystem (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) - Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 - 150 - Restholzentsorgungssystem mit VECOPLAN-Zerkleinerer (55 kW) - Tisch mit Kunststoffbeschichtung für den Zuschnittauslauf - Stapelsystem für geschnittene Platten mit 2 vorderen Auflagetischen mit Luftausblassystem 400 x 6300 mm + 8 Hubtischen (4 x 1300 x 1600 mm und 4 x 1300 x 1410 mm) - Gesamtanschlusswert: 130 kVA

Stanje: rabljeno, Leto izdelave: 2022, Plus freight €4,000.00 and installation and commissioning €5,000.00. Sanding System B Sand 5 with Partial Rotator Operating Method: The panel is placed on the infeed table. It enters the partial rotator and is centered. It is sanded in the sanding unit, processed both in forward and return pass. The panel is rotated in the partial rotator. The second side of the panel is then sanded in the sanding machine. There are then two options: either the panel moves to the outfeed table and is unloaded, or it returns to the infeed table and is unloaded there (the second option increases processing time). Crodpfx Adovvkipsijf Sanding Unit Configuration: - 1 upper sanding lamella roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm. - Cross brushes suitable for sanding cross-grain fibers. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW each (2 units). - 3 upper sanding discs to perfectly cut longitudinal and cross-oriented wood fibers. Power: 1.5 kW each; Diameter: 400 mm. - Disc brush for chamfering edges. The unit operates as a deep brush. Upon detection of the panel edges, it tracks the door edges. Power: 0.75 kW; Diameter: 250 mm. Machine Features: - The unique sanding system of this unit ensures perfect wood sanding and/or intermediate sanding of panels. - All tools are controlled by frequency inverters. - All brushes equipped with quick-release sanding strips; replacement does not require changing the hub. - The discs feature air jets for optimized cleaning and operating time. - Sanding wheels equipped with hook-and-loop fastening system. - Feed and rotation are controlled via PLC to prevent edge breaking of workpieces. - High-quality sanding on 4 sides thanks to the unit’s consistent material removal. - Automatic and rapid switching of processing units. - Constant pass-through height; PLC and industrial software enable integration into a finishing line. - Infinitely variable speed control of discs, brushes, and feed via state-of-the-art frequency inverters. - Reversible rotation (right/left) of discs and brushes with different abrasive grades. - Individually driven feed adjustments for discs, rollers, and belts. - Additional adjustment options of brushes and discs to compensate for abrasive wear and to allow variation of sanding pressure on surfaces. - Robust machine base made of steel tubing ensures maximum rigidity, stability, and flatness. - Milled upper machine bed for optimal parallelism of the working surface for the sanding discs. - All unit carriages are mounted on linear ball bearing guides, providing high load capacity and precision. - Motor-driven feed belt, frequency inverter controlled, 0.55 kW. - Machine doors equipped with safety devices. - Machine doors feature viewing windows for monitoring workpieces during operation. - Pressure rollers below the units, diameter 80 mm, rubber-coated, for secure workpiece hold during processing. - Low ongoing costs thanks to individual replacement of lamellae. - Low operating noise due to enclosed machine housing. - All units fitted with extraction hoods and relevant extraction ports; cover plate with suction connector. - Fully encapsulated housing for a clean operating environment.

Stanje: rabljeno, Sistem za osvetljevanje plošč / Izdelovalec CTP plošč Heidelberg TopSetter 102 Crodpfxozgfvhj Adiof Serijska številka: 2310 Leto: 2001 Spletni video ogled preko WhatsApp – MS Zoom – Telegram Na zalogi v Emskirchen/Nürnberg – Takoj na voljo – Možnost preizkusa

Stanje: rabljeno, Sistem za osvetljevanje plošč / CTP Plate Maker ECRM DPX2 Letnik 2008 Spletni video-pregled prek WhatsApp - MS Zoom - Telegram Na zalogi v Emskirchen/Nürnberg – na voljo takoj – mogoče testirati Credpoytpmljfx Adisf

Stanje: rabljeno, številka stroja/vozila: 008208, Pozicija 1: Formatna žaga – podajanje s sprednje strani HOLZMA-HPP 510/43/43 + HEE 33/22 Cedpsx A Thkjfx Adiorf Pozicija 2: Dvižna miza HOLZMA-HPP 510/43/43 + HEE 33/22

Stanje: rabljeno, številka stroja/vozila: 008505, Pozicija 1: Krožna žaga za plošče – Podajanje od spredaj HOLZMA-HPP 350/43/43 - HEE 38/22 Csdpfx Aey Hcd Sjdijrf Pozicija 2: Dvižna miza HOLZMA-HPP 350/43/43 - HEE 38/22

Stanje: rabljeno, številka stroja/vozila: 007816, Pozicija 1: Avtomatizirano skladišče BIESSE-SELCO SK 450 Cedpfx Aswuufqodiorf Pozicija 2: Krožna žaga za plošče z avtomatiziranim skladiščem BIESSE-SELCO SK 450

Stanje: rabljeno, številka stroja/vozila: 008597, Pozicija 1: Krožna žaga za plošče z avtomatskim podajanjem SCHELLING-VS 12 - FH6 - FH4 Pozicija 2: Krožna žaga za plošče – podajanje spredaj SCHELLING-VS 12 - FH6 - FH4 Pozicija 3: Avtomatizirano skladišče SCHELLING-VS 12 - FH6 - FH4 Cjdpey Stvpofx Adiorf

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Avtomatski skladiščni sistem za plošče (vertikalne plošče) n. 1 dvigalo za sestavljanje paketov plošč Crjdpfx Adoxxlk Noief n. 1 robot za vertikalni odvzem/zakladanje/odvzem paketov sestavljen iz 130 celic, vsaka z okoli 10 ploščami. N. 1 dvigalo za razstavljanje paketov plošč Dolžina približno 50 metrov.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, 1 Panel dividing saw with area storage Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – Right-handed machine Year: 2008 Including integrated area storage PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore storage management software, scrap management, etc. Storage area approx. 37 x 11.5 m Maximum stacking height in storage: 2,500 mm Speed Concept: Setting a completely new benchmark, revolutionizing panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage + Substantial acceleration of the pusher + Central angle alignment device + Electronic height control of the pressure beam + Optimized movement sequences with integrated gripper measurement system Cutting length: 5,600 mm Cutting width (pusher carriage travel): 5,600 mm Panel rotation device for head cuts Laser alignment light for marking the cutting line on the workpiece for visual or scribed cutting Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle feeding of sensitive single panels by vacuum, as well as efficient infeed of panel stacks Saw blade projection: 130 mm Saw carriage feed: Forward: 1–150 m/min Reverse: constant 150 m/min Pusher speed: Forward/reverse: 90 m/min (In EU countries, forward = 25 m/min) Automatic pressure beam height adjustment: yes Automatic cutting height control: yes Adjustable pressure beam clamping force: yes Adjustable gripper clamping force: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device Minimum clamping width: 0 mm Maximum clamping width: entire cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT WITH LIFTING ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTION FENCE Program-controlled ejection of part stacks into the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled Credpoyw Ivhefx Adisf GROOVING PROGRAM (AUTOMATIC) Grooving program with graphical input and process graphics. Positioning accuracy: Groove depth continuously adjustable via control system (hydraulic stop) CUT-OUT / STRESS-RELIEF CUT PROGRAM PART LABELING WITH GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermal transfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' – JUST-IN-TIME – Additional function 'Just-in-time' (possible operating modes): 1. Optimization at the saw ----- - Import function for parts lists from industry packages, Excel, etc. - Inclusion of available remnants in the optimization - In case of production interruption, unproduced parts can be re-optimized - Free selection of which parts with which material to optimize and produce at what time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available remnants - Change panel sizes - Combine runs, etc. A new optimization then takes place directly at the saw. DATA TRANSFER ONLINE + USB PORT CAMERA MONITORING OF THE FEED AREA Material specification for lift table feeding: Maximum waviness: 40 mm/m Minimum panel thickness: 6 mm Maximum thickness tolerance per panel: +/- 0.2 mm Stacking accuracy: +/- 50 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: 0-240-10-3388, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 565 h, največja širina rezanja: 4.250 mm, model krmilnika: POWER CONTROL CADmatic 4 PROFESSIONAL, dolžina odseka (maks.): 4.300 mm, delovna višina: 920 mm, Little-used machine! TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Working height: 920 mm Speeds Saw carriage feed forward: 1–150 m/min Saw carriage feed backward: max. 150 m/min Program pusher speed forward: 90 m/min Program pusher speed backward: 90 m/min Angle cutting package Maximum panel thickness: 48 mm Leg length at 45°: min. 115 mm Angle accuracy at 1,000 mm: 0.1° Cutting angle: min. 0.0° MACHINE DETAILS Control system: POWER CONTROL CADmatic 4 PROFESSIONAL Main drive motor power: 13.5 kW Scoring unit motor power: 2.2 kW Rated voltage: 400 V Frequency: 50 Hz Required air pressure: 6 bar Compressed air consumption: 120 NL/min Extraction nozzle speed: approx. 26 m/s Vacuum: 1,200 Pa Exhaust air volume: 3,800 m³/h Extraction connection, chip duct: 1 piece, 200 mm Extraction connection, pressure beam: 1 piece, 150 mm Operating hours: 565 h EQUIPMENT - Power Concept - Angle cutting package - Groove cutting package Cjdpfx Adjyla I Roijrf - Automatic ejection rule - Labelling package - Data interface for storage systems Note: Further information regarding the machine’s configuration can be found in the attached document.

Leto izdelave: 2018, stanje: rabljeno, številka stroja/vozila: IDLSK03, Sistem za podajanje desk JackSteel za transport desk/blokov iz žage, ločevanje blokov posamezno in nato podajanje v sredinski del za nadaljnje razrezovanje. Pod linijo je verižni transporter za zbiranje sekancev in odpadkov. Linija obratuje pri hitrostih do 90 m/min. Crodpfermkd Usx Adisf

Stanje: rabljeno, Leto izdelave: 2007, Použitý stroj Letnik izdelave: 2007 Oprema in tehnični podatki Dolžina reza: 5300 mm Višina reza: 2200 mm (višina obrezovanja 2110 mm) Globina reza: maks. 60 mm Odsesavanje: - Žagin agregat 120 mm - Konec ogrodja 100 mm Podlaga za obdelovanec: - Stabilna plastična podlaga za optimalno stabilnost tudi pri ozkih obdelovancih. - Ostružki se odvajajo skozi poševne reže. Transportni sistem z ročnim dvigovanjem valjev: Ročen za lažji in materialu prijazen transport Zaskočnik: Ročen, vertikalen in horizontalen Podajanje: Ročno, vertikalno in horizontalno Credpfxozk N S Is Adief Krožna žaga: HM, 250 mm, votli strešni zob, Z48 Motor žage: 4 kW pri 5450 obr./min, 400 V, 50 Hz Zložljiva letev: vključno z naslonom za obdelovanec za ozke dele (5 polj) s tračnim prislonom s Supercut predrezalno enoto Odsesovalna naprava v skladu z BG smernicami TRK (pod 2 mg finega prahu / m³ zraka) Razpoložljivost: takoj Mesto skladiščenja: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 1999, skupna dolžina: 4.850 mm, skupna širina: 1.350 mm, skupna višina: 2.830 mm, Farbe: Grau Gewicht: 850 kg - Baujahr: 1999 - Dokumentation verfügbar: Nein - CE-Kennzeichnung vorhanden: Ja - CE-Zertifikat vorhanden: Nein - Seriennummer: 905312 - Max. Schnitthöhe vertikal [mm]: 2150 - Max. Schnittbreite [mm]: 4150 - Max. Schnitttiefe [mm]: 55 - Max. Sägeblattdurchmesser [mm]: 250 - Vertikales Schneiden: Ja - Spannung [V]: 380 - Stromverbrauch [A]: 6 - Leistung [kW]: 2.2 - Transportmaße: 4850mm x 1350mm x 2830mm (l x b x h) - Transportgewicht [kg]: 850kg Csdpfx Adezcb Sxeiorf - Transportpakete [Stk.]: 1 Finanzielle Informationen: Mehrwertsteuer: Der angegebene Preis versteht sich zzgl. Mehrwertsteuer Mehrwertsteuer/Differenzbesteuerung: Mehrwertsteuer abzugsfähig für Unternehmer Lieferung und Inzahlungnahme jederzeit möglich für alles aus dem Industriebereich Yorick Diebels

Stanje: novo, Dolžina reza: 4300 mm Višina reza: 2150 mm Avtomatika, Elcon precizna formatna žaga tip D 215 ----- Višina reza: vertikalno 2.150 mm, horizontalno 2.100 mm Dolžina reza: 4.300 mm Csdpji Hc S Dofx Adierf ----- Tehnični opis: Globina reza: max. 60 mm Izhod žaginega lista za ploščo: max. 25 mm Žagin list: premer 250 mm, luknja 30 mm, Z=48 kombinirani zob (izmenično votlo-strešni zob) Število obratov žaginega lista: 5.100 obr./min Motor: 4 kW (S 6) Odcitanje mer za: horizontalni rezi: po lestvici in prek podajalne letve vertikalni rezi: po lestvici Priključek za odsesavanje: 100 & 80 mm Potreben tlak zraka: 6 bar Oprema: -Materialna podlaga z 1 valjčkom na meter dolžine reza, vklop in izklop s stopalko -1 valj za dovod in odvod -pnevmatsko dvižno latno ležišče -sredinska podpora, po en element na meter dolžine reza, vsak ročno posamično zložljiv -predrezni sistem: dvojni rez glavnega žaginega lista -togo, samostoječe ogrodje stroja, odporen na zvijanje -dva zložljiva prislona za navpične reze (nad in pod sredinsko podporo) ----- Posebna cena "Partnership Edition" iz tovarne v tej izvedbi: po dogovoru! ----- Dodaten strošek za predhodno dostavo, prevoz, postavitev in usposabljanje (če stroja ni treba razstaviti) Velja samo znotraj ZR Nemčije. Razklad in notranji transport na lokaciji izvede stranka. Cena: EUR 1.990,00 + zakonski DDV ----- Dodatne opcije: Dolžina reza 5.300 mm namesto 4.300 mm Številka naročila: ELCO0075/O049 Doplačilo: EUR 2.590,00 + zakonski DDV ----- Tehnični podatki proizvajalca – brez garancije za točnost!

Stanje: rabljeno, Leto izdelave: 2002, skupna dolžina: 5.700 mm, skupna širina: 1.600 mm, skupna višina: 2.800 mm, Barva: Bela Teža: 750 kg - Letnik: 2002 - Dokumentacija je na voljo: Ne - CE-oznaka je prisotna: Da - CE-certifikat je prisoten: Ne - Serijska številka: 32604 - Maksimalna višina reza v vertikalni smeri [mm]: 2070 - Maksimalna višina reza v horizontalni smeri [mm]: 4600 - Maksimalna širina reza [mm]: 4600 - Maksimalna globina reza [mm]: 60 - Minimalni premer žage [mm]: 240 - Maksimalni premer žage [mm]: 250 - Premer osi žage [mm]: 30 - Horizontalno rezanje: Da - Vertikalno rezanje: Da Csdpfxszh Hqvo Adijrf - Napetost [V]: 400 - Poraba električnega toka [A]: 8.4 - Varovalka [A]: 16 - Moč [kW]: 3.0 - Transportne mere: 5700 mm x 1600 mm x 2800 mm (d x š x v) - Transportna teža [kg]: 750 kg - Transportni paketi [kos]: 1 Finančne informacije DDV: Navedena cena je brez DDV DDV/davčna osnova: Podjetjem je omogočeno odbijanje DDV Dostava in prevzem strojev je možen kadarkoli za vse iz industrijskega sektorja. Yorick Diebels

Leto izdelave: 2003, stanje: rabljeno, Machine (additional): Stainless steel brewing vat Credpfx Aovcqz Eodiof Total capacity up to top edge of shell: 26,000 liters Diameter approx.: 3 m Shell height approx.: 2 m Material thickness: 3 mm unheated shell Width: 3.4 m Material: Stainless steel 1.4301 Base construction: on stainless steel tube supports, anchored to floor Features: External boiler, conical vapor hood (stainless steel, D = 3,200 mm), conical insulation hood (stainless steel outer diameter = 3,400 mm), 2 outlets DN200 and DN100, manhole DN600, vapor pipe (12,000 mm), internal lighting

Leto izdelave: 1998, stanje: rabljeno, Temperature: 200-210 °C Conveyor Speed: 1000 mm/min Credpfeu Rwausx Adisf Max. Workpiece Length: 200 mm Total Power Requirement: 50 kW Machine Weight approx.: 2.0 t Convection Reflow Soldering System for Printed Circuit Boards Soldering system for printed circuit boards (e.g. SMD and/or mixed technology) and for curing SMD adhesives. The soldering system operates with the following functions: Infeed - Preheat - Soldering - Cooling - Outfeed. - Equipped with software functions - Can be integrated into a production line Further technical specifications: - Shielding gas with nitrogen: 30 m³/h; 6 - 10 bar overpressure - Water requirement: 20 litres/min; 2 - 5 bar overpressure - Exhaust air volume: 1000 m³/h - Electrical supply: 12 kW - Space requirement: L:6500 + loading station 2000 x W:1400 x H:2100 mm Additional equipment included: - Automatic stacking unit LSB 03 with reloading head and discharge belt for accommodating, for example, printed circuit boards. - Machine is CE98 certified System suitable as a donor for spare parts or for conversion/expansion. Sale as is. Priced for quick sale.

Stanje: delavnici obnovljeno (rabljeno), 1 par ploščatih motorjev PERSKE po 5,5 kW, primerni za predrezne krožne žage pred žagalnimi linijami z blok trakastimi žagami, en z desnim ter en z levim navojem, za neprekinjeno delovanje 5,5 kW, z novimi krogličnimi ležaji, z 2 jeklenima konzolama (L + D) za montažo. 1 kos krožnožagini ploščati motor KATT 11 kW / 1450 obr/min, prirobnica Ø 200 mm, desni navoj, drugi končni del gredi za pogon hidravlične črpalke z jermensko jermenico Ø 150 mm, preizkušen in na novo ležajen, npr. primeren za prečno žago PAUL 27 AO. Credpfxouqk Azs Adijf

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Glavni motor (kW): 27 Cedpfxszgwpgo Adiorf Predrezilo Dolžina reza (mm): 3300 Širina reza (mm): 2200 Debelina plošče (mm): 40 Vse navedene podatke je podal proizvajalec

Stanje: rabljeno, Leto izdelave: 1984, used Manufacturer: Holz-Her Crjdsvwgi Ijpfx Adief Model: 1215 Year of manufacture: 1984 Motor power: 4.0 kW Cutting length: approx. 5,300 mm Cutting height: approx. 2,200 mm Central support Saw blade diameter: approx. 300 mm, cutting depth 80 mm Free-standing Slatted frame retractable Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without any warranty or guarantee.

Stanje: rabljeno, Leto izdelave: 2022, skupna dolžina: 8.000 mm, skupna širina: 2.400 mm, skupna višina: 2.400 mm, Barva: Siva Teža: 3.969 kg Cena: Po dogovoru - Leto izdelave: 2022 - Dokumentacija na voljo: Da - CE označba prisotna: Da - CE certifikat na voljo: Ne - Serijska številka: 1000056636 - Največja dolžina reza [mm]: 3200 Credpfoy E Hdgjx Adisf - Največja širina reza [mm]: 3200 - Transportne mere: 8.000 mm x 2.400 mm x 2.400 mm (d x š x v) - Transportna teža [kg]: 3.969 kg - Transportni paketi [kos]: 4 Finančne informacije DDV: Navedena cena je brez DDV DDV/obračun razlike v ceni: DDV odbit za podjetnike Dostava in odkup (trgovanje staro za novo) sta mogoča kadarkoli za vse iz industrijskega področja Glenn Smeets

Stanje: zelo dobro (rabljeno), TECHNICAL DATA NOT OF THIS MACHINE RETURN DEVICE for Edge Banding Machine (LEFT) In combination with a single-sided edge banding machine, this allows a single operator to consistently feed the machine. Air curtain table, infeed and outfeed (overall dimensions: 3520 x 2560 mm) 180° transfer (3120 x 2140 mm) with motorized roller conveyors and motorized belts Motorized conveyor belt (9080 x 1560 mm) Crsdpfxeff R Tqs Adief Panel dimensions (MIN/MAX): Length – 240 mm / 2800 mm Width – 120 mm / 1300 mm Thickness – 8 mm / 60 mm, optional up to 100 mm

Stanje: zelo dobro (rabljeno), Turn the panels 180° from top to bottom Panel infeed and outfeed in longitudinal direction One stack of panels processed at a time Crsdpfxsgvpn Io Adisf Min/Max stack thickness mm: 1000 / 1600 Working width (min/max) mm: 300 / 1300 Max usable working length (min/max) mm: 500 (min) / 3000 Electrical control cabinet, separate Total connected load kW: 4.3

Stanje: zelo dobro (rabljeno), Panel saw with rear lifting table infeed Control system: Power Concept Credpfsimr Icjx Adijf Software: CADmatic 4 Professional Lifting table infeed (mm): 4300 x 2200 No. 2 rear pushers (TWIN PUSHER) model POWER CONCEPT With clamping grippers Infeed equipment for thin panels (min. thickness mm): 3 Max. cutting width (mm): 4300 Usable stroke of pusher (mm): 4300 Max. saw blade projection (mm): 95 (automatic) Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 380 mm / 13.5 kW (max. 18 kW) Adjustable saw carriage feed (m/min): 1 - 150 Front air flotation tables (qty): 4 Total connected load (kW): 28 OPTION: - Cut Rite software (optimization) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Label printer (option) - Software LABELING PACKBR 3/4/5 (labels)