Satco Gmbh Naprava Za Hlajenje nakup rabljenega (115.975)

Leto izdelave: 2022, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna širina: 790 mm, skupna višina: 1.960 mm, Blast Chiller Model: ZO161BR Boosted Model Manufacturer: Lainox Dimensions (W/D/H): 790 x 870 x 1960 mm BLAST CHILLING MODE - Positive rapid chilling +90 / +3°C at core, SOFT and HARD modes. - Preservation at +3°C at end of cycle. - Rapid shock freezing +90 / -18°C at core, SOFT and HARD modes. - Preservation at -18°C at end of cycle. - Automatic cycle for fish sterilisation. - Automatic cycle for hardening ice cream. Digital controls with display to show set and measured values. - 2.8-inch colour graphic display with capacitive buttons, protection level IPX5. - 7 pre-set recipes. - 20 user-programmable slots for customised recipes. - Bluetooth connectivity, enabling monitoring and HACCP data download via free app (optional, can be retrofitted after purchase). - Pre-heatable core temperature probe with single measuring point. Lodpfx Aljxfz Ane Nsaa - Pre-cooling function. - Manual and automatic defrosting. Voltage: 3N-AC 400 V - 50 Hz Total electrical power: 281W Core temperature: +90 -> +3°C / +90 -> -18°C Capacity: 4 x GN 1/1-14 x (600 x 400 mm) Shelf spacing: 73 mm

Stanje: rabljeno, Power source for orbital welding unit MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding system MESSER GRIESHEIM - POLYSOUDE RC200 Welding power supply, inverter welder POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Serial no. (welding source): 9885186 Serial no. (cooling unit): 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours read off - Operating and maintenance manual Space requirements welding unit (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight of welding unit: 45 kg Weight of cooling unit: 25 kg Good condition Laodpjt Awm Dofx Al Nea Without accessories Price is for a set consisting of 1 x power source and 1 x water cooler.

Stanje: rabljeno, Chiller Water Recooling Unit DALEX Type DRF 2 Laedpeg D H Rujfx Al Nja Machine No. 38913719 Year of Manufacture: 1989 Flow Rate: 0.35 m³/h Cooling Capacity: 1950 Watts Operating Pressure: 2 to 3 bar Refrigerant: R134a (unit converted from R12 to R134a) Operating Overpressure: 18 bar Pipe Connection Thread: 3/4” Tank Volume: 600 x 400 x 350 mm (approx. 80 liters) Power Supply: 380 Volt, 50 Hz Required Space (L x W x H): 900 x 800 x 1020 mm Weight: 100 kg Good condition

Stanje: rabljeno, Universal temperature control unit WEINREICH Type WTD 4 Temperature control unit with electric heating and connections for external cooling Serial No.: 11932217 Year of manufacture: 1993 Maximum temperature: 140°C Maximum operating overpressure: 6 bar Pump capacity: 30 l/min Tank volume: 4 litres Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Pump motor output: 0.37 kW Circulating water supply & return: G 3/8" Cooling water supply & return: G 3/8" Total power: 4.4 kW Power supply: 380 Volt, 50 Hz, CEE plug - Temperature control medium: water - Temperature controller with actual and setpoint display STÖRK-TRONIC Type ST 96-35.02K - Water circulation pump: SPECK - An external chiller is required for cooling (the chilled water is supplied to the temperature control unit) Lodpsg Rhx Uofx Al Neaa - Mobile on 4 castors Dimensions (L x W x H): 620 x 260 x 670 mm Weight: 55 kg Good condition

Stanje: novo, obratovalne ure: 2 h, Funkcionalnost: popolnoma funkcionalen, skupna širina: 800 mm, skupna dolžina: 1.200 mm, kapaciteta rezervoarja: 90 l, zmogljivost črpalke: 8 l/min, vhodna napetost: 24 V, vrsta vhodnega toka: Enosmerni tok, With our UST-100, your coolant lubricant is produced automatically and continuously monitored, allowing you and your staff to focus on what matters most. Connected to a drum of concentrate and the water supply line, our special mixing process creates an emulsion, which is then fed directly into your machine tanks via the supply lines. Our sensors continuously monitor the concentration, pH value, temperature, and fluid level in the machine tank, ensuring you always know the current status of your coolant lubricant. REQUIRED CONNECTIONS: - 1/2 inch cold water, 5 bar - 230V Schuko power outlet - 10mm OD compressed air, 3 bar OPTIONAL CONNECTIONS: - WiFi for digital measurement protocols and live monitoring outside of production EXPANDABLE: - Additional tanks can be connected at any time, up to a maximum of 20 tanks Lajdpfxou Svhmo Al Nsa !! Flat-rate price for the system including supply to 5 tanks For a detailed price calculation, please contact us !!

Stanje: dober (rabljeno), Papirni tračni filter z veliko netkanega materiala SEITZ, tip PFA 200 Laodpfx Aljyahwvo Noa

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, skupna masa: 390 kg, hladilna zmogljivost: 9,5 kW (12,92 KM), Chilled Water Cooling Unit Cooling Capacity: 6 kW Weight: 110 kg Lajdpfx Alsw D T T Ee Noa

Stanje: dober (rabljeno), Leto izdelave: 2021, Hyfra Gamma 13 Active Immersion Cooler, Laodpfx Alsyfutzo Noa Year of Manufacture: 2021 Immersion coolers are designed for cooling water, oil, and emulsions. The plug-and-play immersion coolers are fully ready for installation and suitable for a wide range of machinery layouts. An agitator ensures uniform medium temperature in the Gamma series immersion cooler models. Easy cleaning is possible thanks to crane eyelets on the cooling unit. The HYFRA Gamma series models are designed as immersion coolers for cooling water, oil, and emulsions. These plug-and-play immersion coolers require a footprint of just 0.5 m² and can be easily integrated into various machine layouts, making them highly suitable for flexible production environments. Despite the compact footprint of only 0.5 m², cooling capacities of up to 28 kW are possible. This provides significant flexibility advantages in the layout planning of production areas and contributes to a noticeable increase in productivity, as more processing machines can be accommodated. In the compact models of our immersion coolers, the condenser is installed horizontally. This specific design ensures significantly reduced heat dissipation to the surroundings, so internal components remain unaffected by the waste heat. All immersion cooler models in this series feature a robust agitator for uniform medium temperature in the lubricant tank. For scheduled cleaning, the HYFRA Gamma series can be easily lifted out of the tank using the fixed crane eyelets. Immersion Coolers: High-Performance Cooling Directly at the Application How does an immersion cooler work? With immersion coolers, the evaporator of the cooler is immersed directly into the cooling medium. The fluid, located in a tank, is continuously and vigorously circulated for optimal cooling performance. High-performance agitators assist this process. What applications are immersion coolers suitable for? Immersion coolers are frequently used to control the temperature of coolant lubricants in filtration and mechanical engineering applications to ensure the performance of utilized equipment. In metalworking, they are also used indirectly to cool tools and workpieces, making them ideal for milling and grinding operations on CNC machines or conventional machine tools. Immersion coolers with modern controls and comprehensive features Depending on cooling requirements, HYFRA Gamma model immersion coolers are equipped with either FreeSmart or FreeAdvanced controllers. The combination of the FreeAdvanced controller with a touch panel offers a structured overview and convenient reading of all key parameters. Both freely programmable controllers feature several digital and analog inputs/outputs. The FreeAdvanced controller additionally includes a full-text display and supports Modbus-TCP.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, - Leto izdelave: 2022 Hladilna zmogljivost: - od 30 °C do 25 °C = 29 kW - od 15 °C do 0 °C = 15,4 kW - Priključna moč: 8,8 kW, 15,6 A Lajdpfx Alsw S T Sco Nja - Dimenzije: 1,05 m x 1,05 m x 1,75 m (D x Š x V) - Stroj je v zelo dobrem stanju - Zelo malo obratovalnih ur!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, minimalna gramatura papirja: 40 g/m², največja gramatura papirja: 300 g/m², Hunkeler RW 6 TECHNICAL SPECIFICATIONS Paper Weight (Standard): 40–300 g/m² Paper Weight with Edge or Center Slitting: 50–120 g/m² Roll Width: min. 165 mm Roll Width: max. 520.7 mm Roll Diameter: max. 1,370 mm Roll Diameter with Edge or Center Slitting: 1,300 mm Edge Trim Width: 8–40 mm Roll Weight: max. 800 kg Speed: 10–100 m/min Speed with Edge or Center Slitting: 10–90 m/min Note on Speed: > 150 m/min from a minimum roll diameter of 200 mm MACHINE DETAILS Rated Current: 7 A Lsdpfxjyzppde Al Njaa Active Power: 1.1 kW Apparent Power: 1.5 kVA Ambient Temperature: 10 °C to 32 °C Relative Humidity: 15% to 85% Optimum Room Temperature as per Paper Specification: 18 °C to 24 °C Optimum Relative Humidity as per Paper Specification: 40% to 60% Weight: 694 kg Hunkeler UW 6 TECHNICAL SPECIFICATIONS Paper Weight: 40–300 g/m² Roll Width: min. 165 mm Roll Width: max. 521 mm Roll Diameter: max. 1,370 mm Roll Weight: max. 800 kg Speed: 10–100 m/min Rated Current: 4 A Active Power: 720 W Apparent Power: 950 VA Ambient Temperature: 10 °C to 32 °C Relative Humidity: 15% to 85% Optimum Ambient Temperature as per Paper Specification: 18 °C to 24 °C Optimum Relative Humidity as per Paper Specification: 40% to 60% Weight: 648 kg Hunkeler RW 6 Vacuum Buffer TECHNICAL SPECIFICATIONS Web Width: min. 165 mm Web Width: max. 521 mm Paper Weight: 50–180 g/m² MACHINE DETAILS Ambient Temperature: 10 °C to 32 °C Relative Humidity: 15% to 85% Optimum Ambient Temperature as per Paper Specification: 18 °C to 24 °C Optimum Relative Humidity as per Paper Specification: 40% to 60% GENERAL FEATURES Configured for online integration with OCE Variostream 8650 roll-fed printer.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 100281518, skupna višina: 2.260 mm, skupna širina: 1.550 mm, skupna dolžina: 1.685 mm, višina izdelka (maks.): 310 mm, največja širina izdelka: 150 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Nova cena je znašala več kot 100.000 EUR! Naprava je pripravljena za nakladanje in transportno zapakirana! Nakladanje lahko prevzame prodajalec. TEHNIČNE PODROBNOSTI Maks. širina za pregled: 150 mm Maks. višina za pregled: 310 mm Transportni sistem Tip transporterja: Vrtljiva miza Hitrost: 12 – 45 m/min PODROBNOSTI O STROJU Rentgenski generator Napetost: 30 – 75 kV Tok: 1 – 8 mA Moč: maks. 300 W Dimenzije (D x Š x V): 1.685 x 1.550 x 2.260 mm Zaščitni razred: IP65 / IP66 Električni podatki Napajanje: 200 – 240 V Lasdpfx Aey Ath Hel Nsa Frekvenca: 50 / 60 Hz OPREMA Vrtljivomizni transporter Hermetično zračno hlajenje Rentgenski inšpekcijski sistem

Stanje: rabljeno, Wastewater treatment plant. Includes: - Mixing and equalization tank 1, 140 m³ - Mixing and equalization tank 2, 40 m³ - Mixing and equalization tank 3, 80 m³ Ledpevcql Rsfx Al Nsaa - Bioreactor 1, 240 m³ - Bioreactor 2, 240 m³ - 2 compressed air compressors for reactor aeration - Secondary clarifier 1, 100 m³ - Secondary clarifier 2, 100 m³ - Thin sludge tank, 70 m³ - Thick sludge tank, 90 m³ - Sludge dewatering units 1 and 2 - Precipitant tank, 25 m³ - Various process water pumps Machine details (Additional information): Years of manufacture: 1992 - 2018 Bioreactor volume: 2 x 240 m³ Operation / Control: Siemens Simatic S7 Equipment: Mixing and equalization tanks 1, 2 & 3; Pump station 1 – Bioreactor inlet; Pump station 2 – Bioreactor inlet; Bioreactor 1; Bioreactor 2; Pump station – Bioreactor outlet; 2 x compressed air compressors; Precipitant tank fill point cabinet; 2 x preparation station; Secondary clarifiers 1 & 2; Sludge tank 1; Mixing tank; 2 x sludge dewatering units; Sludge tank 2

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The pneumatic butt welding machine type Sv‑63P features a robust vertical structure comprising vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable slides connected to a horizontal cylinder for compressing the workpiece. The movements of the slides are mechanically limited in both directions—for clamping and opening—and the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping at the set jaw distance is controlled via foot pedals. An additional control cabinet with switches and buttons allows for individual or simultaneous clamping and supports both manual and automatic welding. Once welding is complete, the clamping jaws open, and the slides return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws by laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the machine cover, a compressed air maintenance unit with a pressure regulator is fitted for adjusting the clamping force. The machine’s main power switch is located on the controller used for setting the welding parameters. Lajdpeyqr Sxofx Al Noa

Stanje: dober (rabljeno), Soldering device for carbide-tipped saw blades VISCAT model BC500 Laedjigv Ebopfx Al Nea

Stanje: rabljeno, Leto izdelave: 2023, proizvajalec krmilnikov: Sonstige, model krmilnika: Formtracepak V6.1, Opis: Tehnični podatki: Pomik v X/Z: 100/500 mm Lodpfoy Dy A Tjx Al Noaa Vpenjalna površina: 600 x 450 mm Križna miza (X/Y): 100/50 mm Oprema/Dodatki: Formtracer: FTA-H4 D3000-D Contracer: C-3200 Surftest: S-3000 Upravljanje: Ročni upravljalnik z joystickom Ostala oprema: Vrtljivi primež, Kalibracijski etaloni, Zaščitna ponjava

Leto izdelave: 1996, stanje: zelo dobro (rabljeno), številka stroja/vozila: 121, more MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Ledoh Eib Espfx Al Noaa

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: PST31, Gebrauchte FISCHER Komplett-Skid-Pasteurisierungs- & Kühlanlage Technische Spezifikationen & Leistungsdaten Diese skidmontierte Plattenwärmetauscher-Pasteurisieranlage ist für die Hochdurchsatz-Thermoverarbeitung konzipiert und verfügt über integrierte Kühl- sowie CIP-Funktionalität. Hergestellt von FISCHER engineering und aufgebaut auf einem Edelstahl-Skid, ermöglicht sie eine schnelle Inbetriebnahme und zuverlässige Performance in der Getränkeproduktion sowie bei industriellen Verpackungsanwendungen. Typ: Plattenwärmetauscher-Pasteur (EUROCAL Serie) Modell: EUROCAL 18CFG Durchsatz: 6.000 l/h Sektionen: 4-teiliger Plattenblock für Heizung, Regeneration und Kühlung Betriebsdruck (PS): 6 bar Baujahr: 2004 Ausführung: Skid und produktberührte Teile aus Edelstahl Kühlmodul: Luftgekühlte Wärmepumpe (Kälteleistung 30,0 kW; Heizleistung 32,0 kW; Kältemittel R407C) Modernste Automatisierungs- & Steuerungssysteme Der Pasteur ist mit einer zentralisierten Automatisierung zur präzisen Steuerung des Wärmeprofils und für reproduzierbare Produktqualität über alle Schichten hinweg ausgestattet. Schaltschrank: Zentraler Edelstahlschrank mit SPS-Steuerung und Touchscreen HMI Sensorik: Druckmanometer, Durchflussregelung und Temperatursensorik für geschlossene Regelkreise Prozessanalytik: Inline-Qualitätsüberwachung zur Echtzeitkontrolle relevanter Produktparameter CIP-Automatisierung: Pneumatische Ventilinseln und Steuerköpfe für automatisierte Reinigungsvorgänge Lodpfey Ai Hljx Al Noaa Integrationsmöglichkeiten in die Produktionslinie Diese gebrauchte thermische Verarbeitungseinheit ist zur nahtlosen Anbindung vor einer Abfülllinie ausgelegt. Sie lässt sich einfach an vorhandene Versorgungsleitungen anbinden und kann sowohl mit bestehenden als auch mit neuen Abfüllanlagen kombiniert werden. Inline/Standalone: Als eigenständiges Pasteurisierungs- und Kühlsystem oder inline als Teil einer kompletten Verpackungslinie betreibbar Formatflexibilität: Für verschiedene flüssige Produkte geeignet, vor der Abfüllung in PET, Glas oder andere Gebinde Schnellanschluss: Rohrleitungen und Medienanschlüsse am Skid ermöglichen schnelle Inbetriebnahme und Produktwechsel Maschinenzustand & Wartungshistorie Die Anlage ist professionell gewartet und befindet sich in sofort betriebsbereitem Zustand. Sie eignet sich für einen schnellen Standortwechsel und zügige Inbetriebnahme in Getränke- oder Lebensmittelbetrieben. Status: Sofort einsatzbereit Pflege: Laufend gewartete, industriegeeignete Komponenten für den Dauerbetrieb Leistung & Vielseitigkeit Ideal für hochwertige thermische Behandlung mit effizienter Energierückgewinnung – gewährleistet konstante Pasteurisierung unter Erhalt sensorischer Eigenschaften. Anwendungen: Milchpasteurisierung, Fruchtsaftverarbeitung, Siruphandling, Würzekühlung in Brauereien Energieeffizienz: Die Regenerationssektion steigert den Wärmerückgewinnungsgrad und reduziert den Medienverbrauch Qualitätssicherung: I...

Leto izdelave: 2018, stanje: rabljeno, sestavljen iz: pražilnega ciklona, transporta surove kave, ročnega upravljanja, gorilnika za dim Lodpfx Aey D Tyxel Noaa

Stanje: rabljeno, Finiture lakirna linija za okna in vrata ----- Kratek opis: Poz. 1: 1x dvojna obešalna tirnica Poz. 2: 1x vrtljivi sklop za nosilce z eno sklopko Poz. 3: 1x "Superjet" potopna naprava Poz. 4: 1x visokotlačni vlažilec Poz. 5: 1x naprava za ločevanje odpadne vode Opcijsko: Lasdpfsy D A Hhox Al Nea Potopni kanal ali bazen (5–6 kadi) Podroben tehnični opis in načrt — glejte pripeto PDF datoteko! ----- Cena zgoraj navedene lakirne linije na povpraševanje! ----- (Tehnične navedbe po proizvajalcu – brez garancije!) Vse cene so brez DDV. DDV se obračuna posebej.

Stanje: zelo dobro (rabljeno), Edge cutting device Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Lasdpewiwnqsfx Al Noa Weight approx.: 120 kg Cutter included

Stanje: pripravljen za uporabo (rabljen), ASYST CNC-naprava za profiliranje in ravnanje Tip: APNC 400 Leto izdelave: 2003 Lasdpjy Edc Tefx Al Nsa Naprava je funkcionalna; kot rezervna ali za nadomestne dele

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, It is important to note that a total of two welding machines and two CNC corner cleaning machines are available, resulting in two complete production lines. The machines are operational and still in daily use. CE conformity: Yes (CE marking on the machine) Power supply: 400 V Frequency: 50 Hz Power connection: 25 A Main switch: Industrial main switch with safety interlock Operating air pressure: 7 bar Main components: - 4 welding heads - Linear motion system - Profile clamping units - Welding plate system - Pneumatic pressing units - Electronic temperature control - Central control unit Lsdpfxoyyavrs Al Noaa - Safety light curtain Operation: Profile clamping – inserting the heated welding plate – PVC melting – generating welding pressure – welding cooling – frame removal The system operates semi-automatically/automatically. Included: - Automatic head positioning - Pneumatic clamping system - Digital temperature control - PLC control - Control panel and industrial PC Control system: Industrial PC control Safety system: - Light curtain - Emergency stop button - Safety covers - CE conformity Still under power in Hungary, the system can be dismantled and delivered around June.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN 1171, teža obdelovanca (maks.): 450 kg, delovna višina: 870 mm, hitrost podajanja osi Y: 45 m/min, delovna širina: 300 mm, trajanje garancije: 12 meseci, skupna dolžina: 1.900 mm, vrsta nastavitve višine: mehanski, skupna masa: 450 kg, skupna višina: 1.500 mm, skupna širina: 1.300 mm, priključek za stisnjen zrak: 6 letvica, Oprema: dokumentacija / priročnik, The APACHE 3 is a cost-effective solution designed for both artisanal and industrial use, perfectly suited for coating façade cladding and its substructures. It is ideally and unrestrictedly suited for coating cross-sections of 300 mm x 25 mm and produces flawless surfaces very efficiently and economically—without the operator needing any special prior knowledge. The unit can also be integrated into automated plants or coating lines. It is capable of coating boards, profile boards, tongue-and-groove boards, rhomboid profiles, laminated and structural timber, decking boards, garden, log cabin, sauna, or privacy screens—all products requiring a top-quality visible surface. Their substructures (typically black) are coated using thin, highly pigmented stains with wood protection agents, without the need for side brushes. The APACHE 3 distinguishes itself from standard market products through its robust monoblock welded steel construction and a coating applied with a curing process using highly resistant Teflon (enamel). This non-stick coating ensures a self-cleaning, exceptionally low-maintenance operation. The machine offered is brand new and available for viewing in our showroom. We are happy to demonstrate our machines and systems either at our facility or at a customer's location near you. For more information and detailed description, please visit our SARMAX website. APACHE 3 Serial Number: SN 1171 Flood coating machine with three (3) brushes Working width: 300 mm Working height: 100 mm Minimum workpiece length: 100 cm Feed speed, frequency controlled: 10 - 45 m/min Number of driven transport rollers: 3 Ø of transport rollers: 80 mm Brush arrangement: two (2) from above, one (1) from below Ø of brushes: 160 mm Central brush drive: 2.2 kW Pneumatic blow-out left/right, fan nozzles for blowing out tongue and groove: 80 l/min Double diaphragm pump: 90 l/min Compressed air consumption: 600 l/min Connection: CEE plug 16 A 400/50/3 V/Hz/P E Total power: 4.5 kW Lsdpfx Aljxhquxj Noaa Working height: 900 +/- 50 mm Weight approx.: 450 kg Operation: via command and display units in accordance with VDE, hydraulic ball valves Dimensions (L/W/H): 1,900 x 1,300 x 1,500 mm Standard: CE Colour, design: grey RAL 7046

Leto izdelave: 2025, stanje: novo, New machine Year of manufacture: 2025 Features and technical specifications: Standard configuration: - Robust machine base body Ledpfx Alewx Aadj Njaa - Dowel system for: dowel diameter 8 mm dowel length 35 mm (factory setting, adjustable from 30 to 40 mm) dowel projection 12 mm (factory setting, adjustable from 7 to 20 mm) recoil-free insertion gun vibratory feeder for dowel transport dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels water tank (stainless steel, 7.5 liters) closed water system with 6 bar water pressure and spray nozzle - Electronic control system with: main power switch ON / OFF program selector switch water / water + insertion potentiometer for dowel feed rate via vibratory feeder potentiometer for water injection quantity indicator light for minimum water level in tank - Chassis/mobile base - Pneumatics: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for counter-bore processing: 1 unit HoKuTech | DübelJet with LeimJet expansion kit incl. devices for hanging/connecting to the DübelJet incl. height-adjustable suspension for glue hose/ Included: 1 HoKuTech | LeimJet glue dispensing unit for counter-bore application for use with PVAc glues up to 75,000 mPas viscosity incl. dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Stanje: dober (rabljeno), Leto izdelave: 1999, Hladilni sušilnik Proizvajalec: KAESER Tip: TE 121 Laodpjttwzbofx Al Nja Leto izdelave: 1999 Nazivna moč motorja: 2,1 kW Vzdrževanje opravljeno s strani podjetja Kaeser. 16426ä