Ruchser Rur nakup rabljenega (217)

Stanje: zelo dobro (rabljeno), Roller conveyors available in lengths of 5,000 mm and 6,000 mm, width 600 mm, with felt or roller tracks for stacking/loading. Codpfx Aomt D Raohxjgt Multiple units available! Please inquire.

Stanje: novo, Working length: 2750 mm Working height: 2500 mm Lifting range of worktable: 300–1000 mm RUCHSER Glazing and Sealing Table RU-SW3-90° Vertical worktable with lifting device and turning mechanism. Particularly suitable for glazing and double-sided sealing of wooden windows. Equipment: - Support section covered with felt - Infinitely adjustable pneumatic lift, stroke from 300 mm to 1000 mm, relative to roller conveyor height - Turning device for double-sided sealing, with roller conveyor (roller length: 150 mm) - 2 pneumatic clamps for securing the window on the turning device - Special turning device allowing windows, set up on the roller conveyor, to be pushed through even while the turning device is engaged (closed) Alternative/optional features available upon request! Item 1.0: Art. No.: 100000 RU-SW3-90° Vertical Worktable for wooden windows with turning device for glazing and double-sided sealing Angle length: 1970 mm; Opening angle: 90°; Maximum working width: 2750 mm; Total length: 3050 mm; Total width: 780 mm; Reference height: 1600 mm; Support surface with felt; left OR right: one roller as edge protection for elements up to 2500 mm high. Pneumatic lifting device from 300 – 1000 mm. Footprint as roller conveyor with steel rollers, roller length and spacing: 200 mm. Total price in this configuration: on request! Options at extra cost: Item 1.1: Art. No.: 5202 EUR 773.00 each Support section with rubber rollers, Ø 48 mm, roller spacing 50 mm, for RU-SW3-90° and RU-SWS3 Item 1.2: Art. No.: 7081 EUR 440.00 each Steel angle covered with felt mounted above the roller bars for RU-SW3-90° Prevents “chattering” of the windows during pushing. The additional bars are mounted above all roller bars of the RU-S2. Item 1.3: Art. No.: 5056 EUR 147.00 each RU-AK-6 Accessory box 1000x120 mm, 6 compartments, for hanging in the roller conveyor Cedpfsxmk D Rsx Ahxogt Total price in this configuration: on request! Ex works plus packaging and shipping, plus VAT. PDF brochure attached. (Technical specifications according to manufacturer – without guarantee!)

Stanje: zelo dobro (rabljeno), Naprodaj profesionalna stroj za odrezovanje in glajenje cevi TUBOGRAT nemškega proizvajalca Tracto Technik Spezialmaschinen. Naprava je namenjena obdelavi koncev cevi ter odstranjevanju notranjih in zunanjih ostružkov. Idealna za delavnice, proizvodnjo in montažo. Trdna konstrukcija zagotavlja dolgo in zanesljivo delovanje. Tehnične specifikacije: Proizvajalec: Tracto Technik Spezialmaschinen KG Model: TUBOGRAT TG 138 Obseg premerov: 6 do 42 mm Hitrost vrtenja: 180 obr/min Smer vrtenja: levo Csdpfeyvgp Tsx Ahxogt Napajanje: 380 V Faze: 3 Frekvenca: 50 Hz Moč: 0,12 kW Tok: 0,4 A Stanje: Naprava v dobrem tehničnem stanju Vidne sledi uporabe Stroj deluje

Stanje: rabljeno, Na prodajo profesionalna posnemalna naprava/ukosilnik za cevi znamke FEIN z glavo GF (Georg Fischer) Tip RA4, nameščena na robustnem delavniškem stojalu za obdelavo cevi. Naprava je namenjena posnemanju robov cevi pred varjenjem – pripravi rob za V-zvar. Industrijska oprema, uporabljena v cevovodnih delavnicah, industrijskih instalacijah ter pri gradnji tehnoloških postrojenj. Stroj je zelo robustne konstrukcije, izdelan v Nemčiji. Udobno delo omogoča stabilno stojalo. Tehnični podatki • Proizvajalec pogona: FEIN – Made in Germany • Model: 680 CB1641 • Moč: 1600 W • Napajanje: 200–240 V • Frekvenca: 50–60 Hz • Tok: 8,8 A • Obrati: 150–270 obr./min Glava • Proizvajalec: Georg Fischer (GF) • Tip: RA4 Uporaba • posnemanje robov cevi • priprava cevi za varjenje • cevovodna dela • varilske delavnice • industrijske instalacije Vizualno in tehnično stanje je razvidno s fotografij. Codpfoyt Ifgex Ahxjgt Robusten industrijski stroj.

Stanje: zelo dobro (rabljeno), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% machine weight reduction thanks to a new body design - Laser cutting point indicator - New ergonomic handle - Swivel-mounted cable with quick coupling The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outside diameter [mm]: 12 – 120 - Pipe wall thickness [mm]: 1 – 9 - Pipe inside diameter (blade Ø 63mm) [mm]: min. 21 - Pipe inside diameter (blade Ø 68mm) [mm]: min. 16 - Pipe inside diameter (blade Ø 80mm) [mm]: min. 4 - Integrated electronic speed controller: 65 – 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200–240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB(A) GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, preventing deformation. Pipe diameter and—in accordance with the pipe material—tool rotational speed are quickly set using easy-to-operate mechanisms. The cutting device is guided manually by rotating it around the pipe, while an electrically powered saw blade cuts or bevels the pipe edge. Codpfxsym Unze Ahxogt This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time-saving and cost-effective solution: - Perpendicular, flat, and burr-free cuts - Pipe ends are prepared for various joining techniques without the need for additional post-processing - Cold cutting – no overheating, thus preventing intergranular corrosion that could cause material cracking - Fast cutting – saves time and money - Beveling of pipe ends – pipe ends can be beveled simultaneously during cutting or separately Optional parts: GF and RA machines can be supplied with either the AVM automatic rotation module or the MVM manual module. - The AVM module continuously monitors cutting speed depending on torque and set parameters. - The MVM module, with a spur gear and handle, enableshead rotation at the same speed with minimal effort.

Stanje: novo, Fitting Storage yes Working width 3000 (3500) mm Swivelling yes Ruchser RU-BM-3000 (Option: 3500) Sash Assembly Table ----- Manufacturer Description: Pos. 1.0 Item 0610000 RU-BM-3000 Sash assembly table, for sashes up to max. 2500 mm height with RU-SH, special screwdriver, length 3000 mm, width 1400 mm, work platform inclination manually adjustable. Usable width 2500 mm Holder for fitting shears or fitting punching tools. 10 swivel-mounted supports for hanging the sashes, completely pneumatically foldable for unobstructed movement of the sashes on the table surface. Device for sensing sash fitting length for constant and variable/central handle position and any handle height for already pre-drilled sashes, colour marking for fitting measurements. Support height adjustable at one stop to either 50 or 60 mm. RU-SH, special screwdriver with pneumatic depth control mounted on trolley, safety control system, pneumatic height adjustment, screw feeding device with automatic stop of the filling hopper manual feed for a second screw length at the special screwdriver, accessories. RA-8, turret stop for 8 screw levels mounted on the trolley. RA-4, support rail manually adjustable in depth to the left and right with one 4-position turret stop on each. PSF – Pneumatic clamping device for sashes against the side stops. Working height adjustable from 900 - 1000 mm. Please specify whether felt, gliding, or brush strips are required as support. Pos. 1.1 Item 6315 RU-BM-... fitting configured as per customer specification Pos. 1.2 Item 0500000 Mounting bracket matched to customer punch/ shears. For installation of a customer-supplied fitting punching tool or fitting shears (third-party make) on the sash assembly table. Please specify manufacturer when ordering!!! ----- Price RU-BM-3000 as described above ex works: on request! ----- Options for fitting storage for RU-BM-3000: ----- Variant: Fixed mounted fitting storage: Price €5,468.00 Item 0630000 RU-BL-30/30 Fixed mounted fitting storage mounted above the sash assembly table Length 3100 mm, depth 1250 mm, with 3 shelves each with 10 compartments separated by partitions. Variant: Free-standing fitting storage: Price €6,017.00 Item 0710000 RU-SBL3000/30 Free-standing fitting storage, length 3100 mm, depth 1250 mm, height 2050 mm, frame structure on the front side without supports, 30 compartments, in one row each 10 units separated by partitions and one continuous top shelf, compartment dimensions: width 280 mm, height 150 mm. 4 angle shelves for corner drives: Price €609.00 Csdpfot Tq Aaox Ahxjgt Arm length 120x120mm; angle approx. 3° Front edge of the angle is bent up 5 mm to prevent accidental unloading. 2 units left and 2 units right under the first shelf of the fitting storage. ----- Additional cost for RU-BM-3500 ----- Item 0610300 RU-BM-3500 Sash assembly table for sashes up to max. 3000 mm height with RU-SH, special screwdriver, length 3500 mm, width 1400 mm, work platform inclination manually approx. 3000 mm wide Additional cost RU-BM 3500 versus RU-BM 3000: €2,811.00 Fitting storage for RU-BM-3500 (only available free-standing): Price EUR ...

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Ruchser voziček za prevoz kril z zaščitnim filcem, 15 predalov po 110 mm, širina: 900 mm, višina: 2400 mm, dolžina: 2200 mm. Csdpfjy Dfwiox Ahxogt

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Prodajamo 2 kosa transportnih vozičkov Ruchser za profile. 12 predalov po 90 mm – brezstopenjsko nastavljivi. Širina: 850 mm, dolžina: 1900 mm, višina vozička: 1800 mm. Cgedpfey Dfq Aox Ahxot

Stanje: novo, You will find the description of the positions in the attached PDF document – Prices on request! RUCHSER standard offer with layout for a timber window production line with pre-milled glazing beads and screwed corner joints. Daily capacity approx. 15 windows Manufacturing line consists of: Pos. 1.0 – Item 107850000 RU-PWD-H1600/130/4 Double-sided Profile Trolley Length 1600 mm, Width 850 mm, Height 2140 mm For horizontal storage and transport of profile cuttings. 12 fixed support arms per column, welded to the column; 2 middle columns adjustable, clear spacing between support arms 130 mm, depth of support arms per side 400 mm, support arms covered with felt, featuring 4 swivel castors (plastic), diameter 150 mm, 2 of which have a locking mechanism. Pos. 2.0 – Item 0150001 RU-M Tilt-&-Turn Table Manually tiltable, support surface 1300 x 1400 mm, with four plug-in extensions, each 1000 mm long, including tool tray, without drainage groove for weather bar. Pos. 2.1 – Item 5009-1 2 Storage Boxes with Two Compartments Each (for RU-4; RU-2/4) Pos. 2.2 – Item 5062-1 Pull-out extensions to the left and right 500 mm and upwards 7000 mm, each with a foldable support leg. Pos. 2.2 – Item 5012-1 Swivelling Extension Tubes Length 700 mm (max. 3 pairs) Pos. 2.4 – Item 6125-2 Corner Assembly Fixture As right-angled stops, pneumatically lowerable with clamping unit for two profiles, mounted on RU-M Pos. 2.5 – Item 2069-1 Tilting Mechanism Instead of manual operation, pneumatically actuated Pos. 3.0 – Item 10782000 RU-EW-2S Double-sided Storage Cart Storage capacity max. 36 casement frames, L-shaped, bolted together, Length 1200 mm, Depth 800 mm, Height 2200 mm, support rails covered with felt, 4 swivel castors, 2 with brakes Pos. 4.0 – Item 6600000 RU-KWI-1000 Order Picking Cart Can be nested when empty, Length 1120 mm, Width 1100 mm, usable width 850 mm, Height 1900 mm, stocking height 1500 mm, load capacity 750 kg, mobile on 4 plastic swivel castors, diameter 150 mm, 2 with brakes, 2 pull-out extensions left and right, each 350 mm long, max. 1800 mm and height max. 2100 mm Pos. 5.0 – Item 740-300 RU-DH-F2 Double Reel Cart for 2 Rolls For roll sizes up to 620 x 350 mm (without spool), up to 800 x 350 mm (with spool), with 4 swivel castors, 2 with brakes Pos. 5.0a alternative to Pos. 5.0 – Item 744-200 RU-DH-F4 Double Reel Cart for 4 Rolls Codpfx Aeytx Urjhxogt For roll sizes up to 620 x 350 mm (without spool), up to 800 x 350 mm (with spool), with 4 swivel castors, 2 with brakes Pos. 6.0 – Item 7360000 RU-BW-1200 Hardware Trolley With 16 compartments, Length 1200 mm, Width 700 mm, Height 1100 mm, with 2 storage shelves, mobile on 4 plastic swivel castors with a diameter of 125 mm, 2 with brakes Pos. 7.0 – Item 10009200 RU-FMOG/K Casement Assembly Tilt-&-Turn Table ...

Stanje: novo, Ruchser Standard offer with layout for a wooden window production with milled glazing bead and screwed corner joint. Daily capacity approx. 30 windows Production line consisting of: Pos. 1.0 - Article 107850000 1 pc. RU-PWD-H1600/130/4 profile cart, double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal storage and transport of profile cuttings. 12 pairs of support arms per column, firmly welded to the column, 2 center columns adjustable, clear distance between the support arms 130 mm, depth of the support arms per side 400 mm, support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, 2 of which with locking device Pos. 2.0 - Article 10776000 1 pc. RU-MSTR assembly station for frame hardware 3000 mm long, width 600 mm 1 pc. tray for hardware parts, Cgjdpfxjytx Uls Ahxot 1 pc. support table covered with felt Working height adjustable between 900 - 1100 mm (Without screwdriving units) Pos. 2.1 - Article 6747 1 pc. running rail with carrier 3000 mm long Pos. 2.2 - Article 6308 1 pc. balancer for devices 3 to 5.5 kg Pos. 2.3 - Article 10778000 1 pc. RU-STS-A stick screwdriver with automatic screw feeding system POWASERT, consisting of stick screwdriver and feeder unit ADS-MF4, complete with hose connections, stick screwdriver ADS 2445 RD with torque shut-off. Set to the customer’s screw guidance system. Suitable for the following screw dimensions: Shaft diameter: 2.4 - 4.0 mm Shaft length: 10 - 35 mm Head diameter: 5 - 8 mm When ordering, details about the screw must be sent to the manufacturer’s factory. Pos. 3.0 - Article 10782000 1 pc. RU-EW-2S storage trolley, double-sided Storage capacity max. 36 sash frames L-shaped screwed, length 1200 mm, depth 800 mm, height 2200 mm, support rails covered with felt, 4 swivel castors, 2 of which with brakes Pos. 4.0 - Article 10766000 1 pc. RU-DR-1 rotary table with drive unit for frame assembly. Table with locking brake. Support platform with cross beams and one extension to the left and right with felt covering. Base dimensions 1400 x 1400 mm, extendable to 2500 x 1400 mm, working height adjustable between 900 - 1100 mm Pos. 4.1 - Article 5360-01 1 pc. fixed mounted tool tray 1000 x 400 mm for RU-DR-1 Pos. 4.2 - Article 6354 1 pc. 3 double meter drive rail for drive unit, rail 10 mm high Pos. 4.3 - Article 6454 1 pc. drive unit with flanged guide rollers and locking brake Pos. 4.4 - Article 6788 1 pc. corner screw fixture. 1 pair of pneumatically height-adjustable clamping units for securing profiles at right angles. Pos. 5.0 - Article 10383000 1 pc. RU-DK-T14/34 tilt-turn table with pneumatic tilting device. Work platform with 4 support beams, Base dimensions 1400 x 1500 mm, extended 3400 x 2300 mm. Support table covered with felt. Tilt table height adjustable from 900 - 950 mm. 2 pcs. folding and laterally adjustable support plates installed. Tr...

Stanje: novo, Avtomatsko za posamezno letev: Da D/N Avtomatsko za okvirje: Da D/N RUCHSER Stroji za izdelavo oken Namestitev sponk pri les-alu oknih v pretočnem načinu in na mizi za pritrditev kril. Cgedpfsytx T Ujx Ahxot Spodnji videoposnetki prikazujejo: 1. Avtomat za nameščanje sponk, vgrajen na mizi za pritrditev kril 2. Nameščanje sponk na stisnjen okvir v pretočnem načinu 3. Nameščanje sponk na posamezen del v pretočnem načinu Prospekt z opisom najdete v priloženem PDF dokumentu. Cene na zahtevo! (Tehnične specifikacije po podatkih proizvajalca – brez garancije!)

Stanje: rabljeno, Leto izdelave: 2013, Skupaj na voljo 6 kosov, cena na mizo Prednosti: - Ozka zasnova podnožja omogoča dober dostop do elementov z vseh strani - Večji razpon nastavitve površine zahvaljujoč izvlečnim romboidnim podpornim elementom - Orodja in drobni deli so vedno pri roki na odlagalni polici sestavljalnih miz - Podporni nosilci po želji prevlečeni z gumo, ščetkami, drsnimi letvami ali filcem - Brez zmede s kabli pri uporabi nosilcev naprav: stroji so vedno na dosegu na delovišču Cgedpeyx Hpcefx Ahxjt Oprema: - Delovna površina prevlečena s profilirano gumo - Na robu romboidno razporejene podpore za odlaganje profilov v vzdolžni smeri - Po višini nastavljivo 900 – 1.100 mm

Stanje: novo, Manual handheld device Yes Y/N Automatic for frames Yes Y/N RUCHSER window manufacturing machines Manual clip insertion with feed for timber-aluminium windows. Item 1 RU-WAL-C, auxiliary trolley with cantilever arm 4000 mm length, swiveling range 120°, total height 2900 mm, storage bins, 1 drawer, counterweight 50 kg and 2 support feet Trolley length 850 mm, depth 700 mm, mobile on 4 swivel castors, 2 with locking device, 3 slide carriages for screwdriving hose pack. Item 2 Holding fixture for L7355 - ADS-MF 4 automatic screw feeder mounted on RU-WAL-C at approx. 1800 mm Item 3 RU-CS-ST-M, ADS-2545A stick-type screwdriver with ADS-MF4 screw feed and aluminium holder box for receiving the rotating or feeding channel is adapted to the aluminium holder. The screwdriver is guided manually and features automatic torque shut-off as well as manual blade advancement. The clip or rotating holder is stored in a container/box and fed to the supply channel manually in the correct orientation. Compressed air transports the holder into the correct screw position. Alternatively, it is possible to screw in clip or rotating holders of the same geometric shape. The box also serves as a top stop plate. Through 2 positioning stops, the depths can be set using indexing bolts. For more than 3 screw positions in depth, it is advisable to use a separate set of positioning stops for sashes and frames. The depth spacing dimensions must be specified when ordering. Item 4 Balancer for devices 3–5.5 kg Brochure with description can be found in the adjacent PDF document. Prices Cjdpfxoyrtymj Ahxegt upon request! (Technical data provided by manufacturer – no guarantee!)

Stanje: novo, Assembly line consisting of: Pos. 1.0 / RU-CBM 4000 Work Table with a 500mm extended guide rail for the additional installation of an aluminum bracket screwdriving machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table. Length 4000 mm, width 1400 mm, tilt angle of the working platform manually adjustable. Mounting bracket for fitting shears or fitting punch. 16 pivoting counter-holders for suspending sashes, fully pneumatically foldable for unrestricted movement of the sashes on the table surface. Device for detecting sash hardware length for constant and variable/central gear placement for already drilled sashes, visual size recognition of the fittings. RU-SH, special screwdriver with pneumatic depth stop mounted on carriage, safety control system, pneumatic height adjustment, screw feeder device with automatic container shut-off (manual feed for a second screw length at the special screwdriver upon request). RA-8, turret stop for 8 screwing levels mounted on the carriage. RA-4, turret stop for 4 different sash widths mounted on the pivoting table. Sash measurement detection pneumatically operated, detection range up to 2500mm with simultaneous clamping of the measuring system. PSF – Pneumatic clamping device for sashes. Working height adjustable from 900 – 1000 mm. Support table covered with felt. Guide rail extended to the left by 800 mm. Pos. 1.1 / 5035-1 Pneumatic swing mechanism for the work surface with foot valve Pos. 1.2 / 0500000 Bracket adapted for customer-provided punch/shears. For mounting a customer-supplied fitting punch or fitting shears (third-party make) on the sash assembly table. Please specify manufacturer when ordering!!! Pos. 1.3 / 5597-7 Travel device for RU-CBM on semi-circular guide rails. The running rollers are mounted left and right on the base frame of the table. Cedpfx Aod Ih Huohxogt Pos. 1.4 / 6354-6 3 double-meter semi-circular guide rails, 30 x 10 mm. Pos. 1.5 / 0730000 RU-SBL3000/40 hardware storage, free-standing, Length 3100 mm, depth 1250 mm, height 2200 mm, Support frame without front supports, 40 compartments, separated by dividing walls into 10 pieces per row, and one continuous shelf above, Compartment size: width 280 mm, height 150 mm. Pos. 2 RU-CSA-SMB aluminum bracket screwdriving machine with automatic screw feeding and manual feeding of the aluminum brackets from a mobile box with pneumatic positioning system, Screwdriver with depth stop with 4-position turret stop. Pneumatic adjustment in the y-direction against two 6-position turret stops. Feeder box for manual feeding of rotational or clip brackets in square form 18.5 x 18.5 mm. The bracket is manually pushed into a channel in the box and positioned in front of the screwdriver tip by a pneumatically actuated slide. Profile depth max. 150 mm, screw spacing in y-direction max. 120 mm. Pos. 3 RU-S48-A6-350 column jib crane for chain hoist, with 6 m aluminum jib arm Version with base column, low-friction jib arm and manual push trolley for slewing and trolley travel by pulling and pushing on the load. Jib reach 6 m Structural height 4.461 m Lower edge of jib arm 3.722 m (upper edge of jib arm 3.9 m) Slewing range max. 270° Steelwork painted in RAL 7035 The base plate is mounted to the hall floor supplied by the customer with ...

Stanje: novo, Staple length, mm Staple width (Rieker width), mm Impact energy, Nm Painting support for simultaneous painting of sash and glazing bead frame RU-LH Painting Aid for Glazing Bead Frames For processing staples L=50mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. One staple is placed at each of the 4 corners of the glazing bead frame. Positioning is done diagonally so that the staples protrude approx. 35 mm from the wood. When pressed into the sash frame, a clamping action is created. During painting, the glazing bead frame is placed approx. 20 mm in front of the sash. After drying or before sash assembly, the glazing bead frame is pressed flush into the sash and then removed again before glazing. The staples can then be pulled out by hand. Stand frame with support table, vertical at 85°, tiltable. 2 compensation frames for different glazing bead thicknesses, operated via foot pedal. Csdpfexpi Efex Ahxjgt Price on request plus packaging and shipping Optional at a surcharge: Pack of staples 26 x 50 mm, 4,300 pieces each EUR 77.00 Images of the painting aid can be found at the end of the adjacent video! (Technical specifications according to manufacturer – subject to change without notice!)

Stanje: novo, Glazing Bead Stapling Machine "2 P Jumbo Automatic E.C." - New - Your Benefits: - Corner joints are closed - No open glazing bead joints - No color differences when painting - Glazing bead frames are easy to assign Staple Corner Jointing Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Selectable between automatic and manual operation; With angle stop, clamping device from above and front Pressure is individually adjustable. Insertion of parallel and overlapping staples possible via electronic control programming. Stapler can be mounted on a suitable work table, operation via foot pedal. ----- Price for this configuration on request! Plus statutory VAT as well as packaging/shipping ----- Images show the Staple Corner Jointing Machine 2P with the optional mobile worktable (see details under additional charges) Additional charges: ----- Mobile worktable Height adjustable from 700 - 1000 mm, 2 detachable support rails, 1000 mm long, 2 pivoting and sliding support rails 1000 mm, support rails covered with felt, Csdpfx Ajvnh T Njhxsgt 4 swivel castors, 2 of which with brakes. ----- Surcharge: 1,321.00 Euro net Staples: packages 15 mm staples (package of 2,000 pcs): Price 22.00 Euro 12 mm staples (package of 3,000 pcs): Price 32.00 Euro 10 mm staples (package of 3,000 pcs): Price 32.00 Euro Dimensions and Weights ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping (Technical data according to manufacturer – no guarantee!)

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Ruchser roller conveyor for windows with 90° rotation device left/right, length 4400 mm. Electrically driven accumulation rollers with two parallel conveyor sections, pneumatically tiltable from vertical to 7° outward on the outside and 7° inward on the inside. Conveyor sections are 1900 mm high with rubber roller strips. Between the rubber strips, 2 mm deep stainless steel sheets serve as sliding surfaces for clip holders. Infeed and outfeed equipped with edge protection rollers (up to 3000 mm high) as rubber rollers. Infeed conveyor: 2000 mm; outfeed conveyor: 4000 mm, both with driven accumulation rollers. Cjdpfxjlpcc Ie Ahxsgt Control and operator panel mounted on a freely adjustable stand.

Stanje: novo, Dimensions (L x W): 1400 x 1750 mm Weight: — kg Tiltable: yes/no yes RUCHSER Assembly Tilting Table RU-MKS 1.4 ----- Versatile work table, e.g., for frame assembly, Cedpox H Al Asfx Ahxogt roller shutter box assembly, muntins, sash fittings, glazing Standard and optional equipment available upon request! Pos. 1.0: Item no.: 8820000 RU-MKS-1.4 Assembly Tilting Table Basic dimensions: 1400 x 1750 mm, extended: 3400 x 2500 mm Support surface with 3 support rails, 2 of which are adjustable, one permanently fixed to the upper extension, with felt covering. Support surface features width and height/depth extensions. Pneumatic tilting mechanism, load capacity 130 kg. Operated by foot valve. Gravity roller conveyor manually foldable and extendable sideways from 1400–2500 mm, roller length: 140 mm (closed). Roller conveyor height adjustable in vertical table position from 300–380 mm, working height horizontally adjustable from 920–970 mm. !For safety reasons, at least one flat clamping cylinder must be ordered! Pos. 1.1: Item no.: 5582 Pneumatic swivel device for roller conveyor for MKS Pos. 1.2: Item no.: 21127 Support rail 1400 mm, non-extendable, for RU-MKS Pos. 1.3: Item no.: 5585 360° rotating device with pneumatic locking in 180° increments Rotation brake with actuation from both sides When the rotating device is used, the minimum roller conveyor height of the MKS table increases to 330 mm Pos. 1.4: Item no.: 6455-01 6 storage boxes, each with 2 compartments, mounted swivel-type; for RU-MKS Pos. 1.5: Item no.: 5597-10 Travel carriage for semicircular track for RU-MKS-P4 Operated by foot valve, mounted on roller conveyor side. Pos. 1.6: Item no.: 6354-6 3 double-meter semicircular tracks, 30 x 10 mm. Pos. 1.7: Item no.: 5193-1 Flat clamping cylinder with hand valve, clamping range 130 mm, retractable mounted on support rail, with felt on contact part, can be mounted left or right — please specify. Pos. 1.8: Item no.: 5584 Lifting unit 450 mm for work on vertically positioned elements. Operated by foot valve. Maximum load capacity: 200 kg for RU-MKS...-1.4, 140 kg for RU-MKS...-2. Pos. 99.1 Pallet packaging ----- Total price for this version: on request! Video and PDF brochure attached. (Technical data as per manufacturer — subject to change without notice!)

Stanje: novo, Number of motors: 2 units Working length: 2650 mm Control: manual Ruchser RU-GLS-ED 45° Glazing Bead Saw ----- Designed for twin cutting of glazing beads The RU-GLS-ED45° double glazing bead saw is set manually to the required size. The machine is designed for twin cutting glazing beads at a 45° cutting angle and features one fixed and one movable saw unit. The manual length adjustment comes equipped with an electronic digital display. Cutting lengths from 150 mm to 2650 mm are possible. During cutting, the glazing beads are held securely from above and the front by a pneumatic clamping system to prevent tilting. Operation is via a safety two-hand control. Saw blade diameter: 250 mm, Length: 3700 mm, Width: 700 mm, Voltage: 400 V. Item 1: RU-GLS-ED45° Double Glazing Bead Saw ----- Cgodpfexmk Dqox Ahxjt With manual dimension adjustment, for twin cutting of glazing beads, cutting angle 45°. Manual length adjustment with digital electronic display, cutting length 150–2650 mm. Pneumatic clamp from above and front. Safety two-hand control, saw blade diameter 250 mm, length 3700 mm, width 700 mm, voltage 400 V. ----- Base price for the above configuration: on request! ----- Ex works. Packing and shipping extra. Options at extra charge: ----- Item 1.1 Spacer set for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, depending on assessment of the glazing beads. Depending on the number of glazing bead types, several spacer sets may be required. To determine the exact quantity, we need profile drawings of the glazing beads prior to order confirmation. Surcharge: on request, after receiving your bead profiles. Item 1.2 Mounting device for template gauge on RU-GL for transferring measured values to the saw with pneumatic installation. Surcharge: 611.00 EUR Item 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. measuring length approx. 2450 mm Measuring gauge made of square tube, with 2 fixed and 2 adjustable cams for measuring the glazing bead length Surcharge: 478.00 EUR Item 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. measuring length approx. 1430 mm Measuring gauge made of square tube, with 2 fixed and 2 adjustable cams for measuring the glazing bead length Surcharge: 428.00 EUR Item 1.5 Operation time switch for independent extraction system. Adjustable from 5 sec. to 3 hrs. For each sawing operation, the extraction runs for the preset time. If another cut is made within this period, the extraction time restarts. Surcharge: 702.00 EUR Item 1.6 1 set carbide saw blades RU-GLS-P45 and RU-GLS-ED45° D = 250 mm x 3.2/2.2 x 30, 80 teeth, comprising 1 saw blade L6444 (right) and L6443 (left) with special 43° grind. Surcharge: 576.00 EUR ----- All prices in euros, net, plus statutory VAT. (Technical data per manufacturer, subject to change without notice!)

Stanje: novo, Number of motors: 2 units Working length: 2,380 mm Control system: — RUCHSER RU-GL-45° ----- Glazing Bead Saw on Sliding Work Table Designed for pairwise cutting of glazing beads on the sliding work table The RU-GL glazing bead saw is mounted on a sliding work table with sensing and clamping devices for two glazing beads. Cutting length min. 230 mm, max. 2,380 mm. Left saw fixed, right saw mounted on a carriage, manually adjustable. Pneumatic clamping from above and the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt surface, total length with side shelf 3,300 mm, width 1,400 mm, working height 800–1,000 mm. Pneumatically lowerable counter bearings for positioning sashes. Pos. 1: RU-GL Double Glazing Bead Saw 45° on RU-SA-3000 ----- For glazing beads up to 30 x 70 mm (W x H) Mounted on the sliding work table with sensing and clamping devices for two glazing beads. Cutting length min. 230 mm, max. 2,380 mm. Left saw fixed, right saw on carriage, manually adjustable. Pneumatic clamping from above and side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt surface, length with side shelf 3,300 mm, width 1,400 mm, working height 800–1,000 mm. Pneumatically lowerable counter bearings for sash positioning. ----- Base price, as specified above: on request! ----- Excludes packaging and shipping, as well as current material surcharge of 6% of the total price Options and Additional Prices: ----- Pos. 1.1 1 set of carbide saw blades for RU-GL glazing bead saw D = 200 mm, 64 teeth, consisting of 1 each saw blade L1233 (left) and L1085 (right), with special 43° grind. Additional cost: 421.00 EUR Pos. 1.2 Mounting device for sensing gauge on RU-GL to transfer measured values to the saw, with pneumatic installation. Additional cost: 611.00 EUR Pos. 1.3 Sensing gauge for glazing beads, total length 2,550 mm, max. sensing length approx. 2,450 mm. Measuring gauge made of square section with 2 fixed and 2 adjustable cams for sensing glazing bead length. Additional cost: 478.00 EUR Pos. 1.4 Sensing gauge for glazing beads, total length 1,500 mm, max. sensing length approx. 1,430 mm. Measuring gauge made of square section with 2 fixed and 2 adjustable cams for sensing glazing bead length. Additional cost: 428.00 EUR Codpfx Ahexmkz Nsxegt Pos. 1.5 Spacer set for rabbeted glazing beads for RU-GLS-P45° and RU-GLS-ED45°. Price available on request after review of glazing beads. Depending on number of glazing beads used, multiple spacer sets may be needed. To determine exact quantity, we require profile drawings of the glazing beads prior to order confirmation. Additional cost: on request, after submission of your glazing bead drawings. Pos. 1.6 Operating time control device for independent extraction system. Adjustable from 5 sec. up to 3 hrs. For every sawing operation, the set extraction time is activated. If sawing occurs again during the extraction time, the timer resets. Additional cost: 702.00 EUR ----- Total price ...

Stanje: dober (rabljeno), Leto izdelave: 2010, Dvigalo za materiale, pripomoček za polaganje, montažno dvigalo, Superlift Contractor, dvižno dvigalo, transportni trak, tračni transporter, transportni trak; naprava omogoča, da ena oseba sama polaga profile na stroje, kot so dvojnoročne žage, linije za foliranje, stroji za ojačitev, podajalni magazini, obdelovalni centri itd. -Proizvajalec: Ruchser, pripomoček za polaganje tipa RU-AH -Nosilnost: 30 kg -Dvižna višina: 345 do 1080 mm -Transportni trak: Krups KF30 -Transportna dolžina: 2200 mm -Širina traku: 75 mm Cgodpfxoyapglo Ahxst -Hitrost: frekvenčno regulirana 8 - 50 m/min -Dimenzije: 2220/1000/H1370 mm -Lastna teža: 216 kg

Stanje: rabljeno, Dimensions (L,W), mm Weight approx. 90 kg Height adjustable (yes/no): yes Lift 300 - 800 mm Worktable surface area 1,700 x 1,500 mm Max. table width 3,800 mm Payload approx. 130 kg Ruchser RU-4-SSP rotary-tilting table ----- Support surface 1700 x 1500 mm, maximum table width when extended 3800 mm, pneumatically tiltable, weather leg recess, with 6 storage boxes each with 2 compartments, pull-outs underneath for widening, with 2 support feet and 2 flat clamping cylinders, lifting device from 300 - 800 mm, roller conveyor as setup surface, can be folded down. Load capacity 130 kg. Travel unit with 4 swivel castors with locking device (RU-4SSP) 2 stops for final inspection and sealing Wing assembly fixture with tool tray and adjustable stop for angled positioning for RU-4-SSP Holder for drill, screw gun, etc. with screwdriver holder Csdpsvu Hfdjfx Ahxsgt Travel unit with flanged rollers RU-DKFA and RU-4SSP 3 double metre travel rail for the travel unit 25 x 10 mm ----- Price for the above-mentioned machine on request! plus packaging and shipping ----- (Technical data according to manufacturer's info - without guarantee!)

Leto izdelave: 2013, stanje: rabljeno, Naprava omogoča nalaganje profilov na stroje, kot so dvosmerne kotne žage, stroj za laminiranje, stroji za ojačitev, podajalni magazini, obdelovalni centri itd., s strani ene osebe. Cjdpfsxykvgex Ahxogt

Stanje: novo, Leto izdelave: 2026, The WP400 self-centering three-jaw chuck is a high-quality accessory designed for use with welding positioners and welding rotators. It enables quick and stable clamping of cylindrical or hexagonal workpieces within a diameter range of 120 to 380 mm. Thanks to its robust construction and high clamping force, the chuck guarantees the reliability and precision required for automatic and semi-automatic circumferential welding processes. Key features of the WP400 chuck: - Wide clamping range – the ability to clamp components with diameters from 120 to 380 mm ensures versatility for both serial and single-piece production. - Self-centering three-jaw mechanism – guarantees fast and precise alignment of the workpiece along the rotation axis of the rotator. - High clamping force – 350 kg, allowing for secure fixation of even heavy components during dynamic rotation. - Compatibility with welding positioners – the chuck works perfectly with welding rotators, enabling their full utilization. - Stable and durable construction – engineered for long-term use in industrial environments. Cgedpfx Aheycqpyjxjt Design and technology: The WP400 model is outfitted with a precise, synchronously operating mechanical clamping system that ensures accurate positioning of the workpiece relative to the rotational axis. The three independently moving jaws are made of hardened, wear- and deformation-resistant steel. The large through-hole diameter of ⌀170 mm allows for pass-through machining of workpieces such as pipes and sleeves, while the 240 kg load capacity ensures safe handling of heavy elements. Precision and work efficiency: The WP400 chuck minimizes preparation time for welding operations, thus improving workstation productivity. Its self-centering system eliminates alignment errors and contributes to better quality of circumferential weld seams. The chuck’s design ensures system rigidity, which is crucial for automated operation. Applications: The WP400 chuck is intended for use in industrial facilities operating welding positioners, rotators, or other devices supporting welding processes. It is ideal for clamping pipes, sleeves, flanges, and other workpieces to be processed or welded in a rotary setup. Its high clamping force and load capacity make it suitable for both light and heavy production environments. Technical specifications Model: WP-400 Max. clamping force: 350 kg Max. load capacity: 240 kg Thru-hole diameter: ⌀ 170 mm Clamping range: ⌀ 120–380 mm

Stanje: novo, Leto izdelave: 2026, The WP200 self-centring three-jaw chuck is a professional accessory designed for use with welding positioners and welding rotators, such as the PS310 and PS320 models. Its precise clamping mechanism enables quick, stable, and concentric securing of pipes and workpieces with cylindrical or hexagonal cross-sections, significantly improving the efficiency and safety of circumferential welding processes. Key features of the WP200 chuck: - Self-centring three-jaw mechanism – ensures uniform and stable clamping of components regardless of their shape. - Versatility – compatible with most welding rotators and welding positioners, including CORMAK PS310 and PS320. - Precise fastening – perfect adaptation to the workpiece translates to higher weld quality and stable rotation. - Durable construction – robust, compact body made from durable materials resistant to high mechanical and thermal loads. - Compact dimensions and easy installation – low weight and accurately spaced mounting holes allow for quick integration with welding equipment. Design and technology The WP200 chuck features three high-quality jaws designed for quick and automatic centring of the workpiece along the axis of rotation. The external diameter of 200 mm and internal diameter of 80 mm allow for clamping workpieces up to 170 mm in diameter. The body is made of high-grade steel, ensuring resistance to deformation during prolonged use. Precision and performance The self-centring three-jaw mechanism of the WP200 chuck significantly reduces set-up time. Minimised play and elimination of positioning errors directly contribute to improved quality of circumferential welds. Stable clamping also provides increased operator safety. Application The WP200 chuck is intended for use with welding rotators, welding positioners, and rotary tables in the welding of pipes, flanges, rings, and cylindrical components. It is ideally suited for welding workshops, production facilities, and the structural steel industry. Technical data Max. pipe diameter: 170 mm External diameter: 200 mm Internal diameter: 80 mm Mounting hole spacing: 85 mm Screw hole diameter: 9 mm For welding positioners: PS310, PS320 Weight: 10 kg Cgedpfxeycqnvo Ahxst