Rotox Žaga Za Steklene Perle nakup rabljenega (84.622)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 403 6274, skupna masa: 297 kg, Dimensions: Machine width: approx. 700 mm Machine depth: approx. 1,350 mm Machine height: approx. 1,250 mm Weight: approx. 250 kg Cutting angle: 45° Tools used: All milling and cutting tools must comply with DIN EN 847-1 and be appropriately matched for rotational speed to the spindle motor speed. Milling cutter: Ø 150x30x3.0, 32 teeth Saw blade: Ø 300x30x2.6, 96 teeth GLA 403 OPERATING MANUAL Copyright © by FM ROTOX Sp. z o. o. Page: 14 Material to be machined: PVC glazing beads: Profile length: min. 200 mm (depending on stop position) Profile height: min. 5 mm, max. 50 mm Profile width: min. 10 mm, max. 50 mm Tool clamping: Pneumatic Electrical section: Electrical connection: 400V, 50Hz (AC) Power consumption: 2.2 kW Protection: 16A (slow-blow) Saw motors: 230/400V; 4.0/2.3A 1.1 kW; 50 Hz; 2,860 rpm Pneumatics: Operating pressure: 5-6 bar Hfodpfewhpp Rsx Alfsg Limit pressure: min. 5 bar (also during operation), max. 6 bar Air consumption: approx. 15 l/min per saw feed Connection: NW Ø 9 mm Permissible operating temperature: Min. 15°C, max. 40°C

Stanje: rabljeno, Leto izdelave: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right sawing unit is fixed; the left unit can be adjusted to the required cutting length, which can be read off a digital display. Both units feature supports enabling simultaneous cutting of two glazing beads. For processing larger cross-sections, the upper support can be removed. Upon completion of the cutting cycle, the pneumatic clamping cylinders automatically swing to the side, simplifying loading and unloading. STANDARD EQUIPMENT: • Fixed right-hand unit • Digital measuring display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety guards with horizontal, pivotable clamping devices • Two-hand operation • Belt drive • Pneumatically raised sawing unit • Central support TECHNICAL SPECIFICATIONS: • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm Hjdpfsxnlgcex Alfefg • Weight: 217 kg • Footprint (standard configuration): 3000 x 850 mm Extended cutting capacity: 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions: 1 set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 pc Adaptations for rebated profiles: 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (shown in green), an angled presser is depicted, following the inclined profile and pressing it against the (shown in red) spacer on the stop. Location: Garbsen

Leto izdelave: 2022, stanje: skoraj kot novo (rabljeno), Krožna žaga za profile, zasteklitvene letvice - OMRM 105, leto 2022 Tehnične specifikacije: • Samodejni rez PVC profilov za zasteklitvene letvice na 45° • 4 rezilne žagine plošče • Vertikalni pnevmatski prijemni sistem • Ročaj za enostavno prilagajanje matrice • Dvojni rez zasteklitvene letvice na 45° v enem postopku Hodpfjw D Dq Usx Alfofg • Nastavljiva hitrost reza preko regulatorja na kontrolni plošči Standardna oprema z dovajalnimi in merilnimi trakovi (2,5 m + 2,4 m)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 2.150 mm, največja širina rezanja: 5.300 mm, skupna dolžina: 5.510 mm, skupna masa: 950 kg, Oprema: CE označba, TEHNIČNI PODATKI Hjdoy Nxwtspfx Alfefg Maksimalna višina reza (vertikalno): 2.150 mm Maksimalna višina reza (horizontalno): 2.070 mm Maksimalna širina reza: 5.300 mm Maksimalna globina reza: 80 mm Minimalni premer žaginega lista: 300 mm Maksimalni premer žaginega lista: 300 mm PODATKI O STROJU Napetost: 400 V Poraba toka: 8 A Varovalka: 16 A Moč: 4,0 kW Dimenzije in teža Dimenzije (D x Š x V): 5.510 x 1.720 x 2.920 mm Teža: 950 kg Transportni paketi: 1 OPREMA CE označba Horizontalno rezanje Vertikalno rezanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Hedpfx Aehvan Islfefg Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping grippers: 8 pcs. Saw carriage height adjustment on THK guides Pressure beam with slots (through-feed) Side alignment device Pneumatic quick-change saw blade system Extraction connection diameter: 1 x 120 mm & 1 x 150 mm Installation dimensions (L x W): 5700 x 6000 mm Weight: approx. 2,500 kg INVERTER NEW Note on used machines: • Technical data may be subject to errors and prior sale. • All prices are ex-works, free loaded onto truck! • The machines have been cleaned and tested for functionality. • All machines are sold as viewed, with no warranty or guarantee. The buyer has the opportunity to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, ALTENDORF Model F45 Pro Drive Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at special price with full manufacturer's warranty. Pro Drive Control: 3.5" colour display with separate keyboard Automatic adjustment of parallel and mitre fences when tilting the saw unit Easy axis calibration Machine diagnostics, operating hours counter, USB interface Recall of last measurement entry (back function) 99 storable cutting programs Grooving: with automatic stepwise positioning of the parallel fence 400V / 50Hz - Europe, scale: mm scale Electromotive height and tilt adjustment 0 – 46° for the main saw blade with automatic cut height correction when tilting the saw unit Machine height 910 mm (standard equipment) The F 45 control panel is mounted at eye level, allowing convenient operation of all axes and easy overview of all settings. Single-handed operation of the swing-away device is easily accessible from the operator's position in front of the machine. Another advantage: nothing obstructs your way at the smooth machine front. INCLUDES OPTIONS: M62003 Template holder M64080 Increased cutting height with saw blade projection up to 204 mm max. M51101 Single-side tilting saw unit with 7.5 kW (10 HP) motor M24030 2-axis scoring unit with electromotive height and lateral adjustment M24037 LED lighting for the scoring unit hazard zone M41010 Table extension, 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Mitre-angle fence, crosscutting up to 3500 m M44443 CNC-controlled parallel fence, cutting width 1300 mm M44450 Front support roller M37003 On/off switch on the double roller carriage Hfodpfx Aoiz Aufolfsg Note on used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex location - free loading! • Machines have been cleaned and function-tested. • All machines are purchased as inspected, without any warranty claim. Buyers are free to inspect the machines at the site. • Special agreements only possible in written form. (We only answer inquiries with your address + telephone number!)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, dokumentacija / priročnik, zaščitni pokrov žaginega lista, Formatna krožna žaga Robland model E3100 Stroj v odličnem stanju, popolnoma delujoč in pripravljen za uporabo. Idealna za natančne in profesionalne obdelave plošč in masivnega lesa. ✔ Pregledan in preizkušen v vseh funkcijah Hjdpfx Aoy R D Slolfsfg ✔ Izvedeno vzdrževanje mehanskih in električnih komponent ✔ Natančno in gladko drsenje vozička Stroj je bil pregledan s strani podjetja, specializiranega za servis in vzdrževanje. Za več informacij ali preizkus stroja nas kontaktirajte.

Leto izdelave: 2002, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0266232, I am selling an automatic metal saw with a feeding device - Type: PEGAS GONDA ​​automatic 230-AFC - Year: 2002 - Serial No.: 0266232 ACCESSORY: Feeding device for cutting 5 m bars. The saw is fully automatic. The feeding device allows cutting 5 m bars into pieces of any length. Up to a dimension of 40 mm, it can also pull two bars forward at the same time. The saw is regularly maintained, flawless and in excellent condition. It is connected to the electrical network and ready to star Hfjdpfx Aey Rzqfslfjg

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 2.240 mm, največja širina rezanja: 5.300 mm, premer žaginega lista: 300 mm, skupna dolžina: 5.300 mm, skupna širina: 2.240 mm, leto zadnje generalne obnove: 2024, Oprema: CE označba, dozator, zaščitni pokrov žaginega lista, Ponujamo to rabljeno pokončno panelno žago Striebig CONTROL 6224, letnik 2010. Stroj bo na voljo predvidoma konec junija!!! Žaga je še vedno v uporabi. Območje reza: 5300 x 2240 x 80 mm Hitrost podajanja: 10-25 m/min Enota za predrezovanje Prosto stoječa podpora Elektronski pozicionirni sistem CON EPS v osi Y Samodejno obrezovanje zgornjega roba Stroj je na voljo za osebni prevzem! Hfedpfxeyx Hd Te Alfsg Za dodatne informacije ali vprašanja nam pišite ali nas pokličite.

Stanje: dober (rabljeno), Leto izdelave: 2008, Proizvajalec: EBG-TECH Tip: BMW N-63 Leto: 2008 Največji premer diska: 300 mm Skupne dimenzije: 1900 x 1200 x 2900 mm Teža: 1750 kg Hfsdef Ecwzspfx Alfjg

Stanje: rabljeno, Leto izdelave: 2001, Použitý stroj Rok výroby: 2001 Oprema in tehnični podatki: - Dolžina reza: 4300 mm - Višina reza vertikalno: 2150 mm, horizontalno: 2100 mm - Največja globina reza: 60 mm - Premer žaginega lista: 250 mm; pritrdilna odprtina: 30 mm - Motor: 4 kW - Obrati: 5100 obr/min - Nosilna površina z valji za material Hfodpfx Aljxvnpcofog - Fiksni nosilni elementi za varno stabilnost obdelovancev - Srednja nosilna točka: stabilni nosilni elementi v delovni višini, posamezno ročno zložljivi - Odčitavanje mer: - horizontalni rezi prek lestvice - horizontalni rezi prek dolžinskega prislona 50–500 mm - vertikalni rezi prek prislona 0–1300 mm - Priklop na zračni tlak za pnevmatsko pomični letveni ležišče (potreben tlak: 6 bar) - Predrezovalni sistem: z dvojnim rezom glavnega žaginega lista; globina potopa žaginega lista je omejena s preprostim premikom prislona, tako da žagin list v enakomernem gibanju predreza obdelovanec Razpoložljivost: kratkoročno Lokacija skladišča: Röllbach

Stanje: rabljeno, Leto izdelave: 1994, Dolžina reza 5300 mm, višina reza 2200 mm, višina reza 80 mm, ročni pomik, merilni sistem skala, samostoječa podpora, nazivni tok 21 A. Skladišče: Nattheim. Hodeytrhrspfx Alfjfg

Stanje: rabljeno, Leto izdelave: 1990, Polnilni stroj za približno 8000 steklenic/uro Stroj (dodatno): stroj za polnjenje in zapiranje Zmogljivost cca: 8000 steklenic/uro Formati: 0,5 l euro steklenica, 0,33 l longneck steklenica, 0,5 l steklenica s preklopnim zamaškom Postavitev: prosto stoječa Hedpfx Aew S T H Telfefg Oprema: 1 pred-evakuacija, polnjenje s kratko cevjo, zapiralec kronskih zamaškov

Stanje: rabljeno, Leto izdelave: 2014, Technical Description: - Cutting Height: vertical: 2,150 mm; horizontal: 50–2,000 mm - Cutting Length: 4,300 mm - Cutting Depth: 80 mm (with clamps: 55 mm) - Saw Blade Projection Behind Panel: approx. 15 mm - Saw Blade: Diameter 303 mm, Bore 30 mm, Z = 60 ATB (alternate top bevel) - Saw Blade Speed: 4,200 rpm - Motor: 4 kW (5.5 HP) - Required Air Pressure: 6 bar - Material Support Rollers: 20 ball-bearing rollers + 2 infeed and outfeed rollers - Panel Clamping for Horizontal Saw Cuts: pneumatic workpiece clamping unit with switch on control panel - Middle Support: 3 individually folding support elements for 3 meter panels - Dimension Reading For: - Horizontal Saw Cuts: - Via electronic digital display with zeroing (for strip cutting from top to bottom) Hfedpfx Aey Rphxjlfjg - Via scale from 0–2,100 mm - Via strip cutting stop from 75–730 mm - Vertical Saw Cuts: - Via electronic digital display - Via scale from 0–1,300 mm - Extraction Ports: 100 mm for saw unit, 120 mm for rear extraction channels; located on the right side of the machine frame Equipment Features: - ADVANCE Clamping System, consisting of 2 pneumatically-operated clamps moving vertically on a motor-driven ball screw from top to bottom. The clamps can be positioned to the top edge of the panel via joystick control. The clamps detect the panel’s top edge with a contact switch and stop automatically when the edge is reached. The clamps then close and hold the panel in place. The system handles panels up to 150 kg. Clamps (with panel) can then be raised for trimming the bottom edge. Once trimmed, the panel is placed back on the lower support (also detected by a contact switch). The clamps can then be raised again or hold the panel during horizontal cutting for relief. This prevents the panel from falling onto the saw blade after horizontal cutting. Standard clamp spacing: approx. 1,800 mm. Clamps are on the right side (other positions available at extra cost). Minimum strip height with Advance clamps: 400 mm. - Electropneumatic scoring system for chip-free cuts by double-cutting with the main blade (always ready – no need to adjust scoring width, easy operation). - Torsion-free, freestanding machine frame. - Round bar guidance for vertical and horizontal movement. - Pneumatically retractable slat frame prevents the saw from cutting into rear slats. Sensors detect slat position, slat frame retracts pneumatically if the saw would hit a slat. - Extraction port for saw head collects dust in front of workpiece. - Extraction ports for 3 vertical channels collect dust behind the workpiece. - Fine-adjustable folding stop for vertical cuts, guided by 30 mm round bar. - Stop extension: heavy panels on lower rollers no longer need to be lifted to the central support to reach the folding stop. - Fine adjustment for horizontal cuts via handwheel. - Folding strip-cutting stop with ball-bearing detection at the top edge of the panel, adjustable from 75–730 mm.

Stanje: novo, Leto izdelave: 2025, Viking VBS1400 Sawmill Block band saw with double-cut bandsaw blades. Cuts in both directions! Wheel diameter: 1000 mm Bandsaw blades: Double-sided = 150 mm wide, Single-sided = 140 mm wide Blade speed: Infinitely variable, 0 - 45 m/s Feed speed: 0-60 m/min Log diameter: up to 1400 mm (max. 1600 mm) Cutting length: 6 m (extendable up to 12 m, extension not included) Saw head: 3500 kg Digital cut thickness adjustment via CNC touch panel Hand control unit with joystick Cut line visualization via green laser and video monitoring 30 kW saw motor Frequency converter 30 kW - stepless adjustment for saw blade speed control to suit different wood types Log handling: Hydraulic Hodpfxey Rq Tcj Alfjfg Condition: New

Leto izdelave: 2025, stanje: novo, Vodoravna ločilna tračna žaga - VIKI 750-80: Premer valjev: 800mm Širina tračnega lista: 80mm Maks. širina reza: 750mm Maks. višina reza: 350mm Min. višina reza: 1,0mm Hitrost rezanja: 0,1 - 18 metrov/minuto Motor: 22kW Pogonski motor: 1,5kW Dvižni motor: 0,75kW Dimenzije: 2500x2700x2200mm Teža stroja: 2000kg Napetost lista: hidravlična Digitalna nastavitev debeline reza Vključeno: - Avtomatski pomik naprej in nazaj - Dvojni pritisni valj Opcijsko: - 22kW frekvenčni pretvornik v ločeni elektro omari Hsdpfxsy Rq Rzo Alfjfg

Stanje: novo, Leto izdelave: 2024, Underground Light-Alloy Circular Saw Brand: METALLKRAFT Model: ULMS 420 Article No.: 3627420 Condition: New machine Cutting range (square): 120 x 120 mm Speed: 2900 rpm Standard features include: - Saw blade 420 x 30 x 4.0 mm Z 120 - Minimum quantity lubrication system Hsdpfx Aotuch Eelfefg - Compressed air gun and spiral hose - Two extraction ports for connection to a dust extraction system - Operating manual

Stanje: rabljeno, Leto izdelave: 1998, maks. širina reza: 5300 mm maks. višina reza: 2200 mm premer žaginega lista: 300 mm maks. debelina obdelave: 80 mm luknja žaginega lista: 30 mm spodnja podpora: fiksni valji materialna podlaga: zaprto leseno ležišče nagib žagine glave: ročen odsesavanje: zunanje odsesavanje zaklep nosilca žaginega lista: ročen teža cca.: 1500 kg Hfsdpfoy N Thtox Alfeg dimenzije: 6300 x 1500 x 2900 mm moč motorja: 5,5 kW Lokacija skladišča: pri dobavitelju

Stanje: novo, Leto izdelave: 2026, Maksimalna dolžina vodoravnega reza: 4200 mm Maksimalna višina navpičnega reza: 2200 mm Maksimalna višina vodoravnega reza: 2080 mm Maksimalna debelina reza: 60 mm Moč motorja: 5 KM (3,7 kW) Premer rezila: 250 mm Hfodpfx Alexga H Iefsg Hitrost rezila: 5300 vrt/min Vodoravni digitalni prikazovalnik Navpični digitalni prikazovalnik

Stanje: rabljeno, Leto izdelave: 2017, najv. širina reza: 4200 mm najv. višina reza: 2200 mm premer žaginega lista: 250 mm najv. debelina obdelave: 60 mm sredinska izvrtina žaginega lista: 30 mm spodnja podpora: plastične podloge podpora za material: izvlečne plastične letve merilni sistem: skala nagib glave žage: ročno pomik žage: ročno pritrditev: prosto stoječe odsesavanje: zunanje zaklepanje žaginega nosilca: ročno Teža ca.: 1000 kg Hsdpfx Alsxg Igiofofg Mere: 5600 x 1700 x 3000 mm Moč motorja: 4,2 kW Lokacija skladišča: Nattheim

Stanje: rabljeno, Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 218 mm, dolžina pomika po osi Y: 218 mm, dolžina podajanja os Z: 116 mm, Prodajam popolnoma delujočo CNC strunasto žago za peno italijanske znamke DB. Dimenzije delovne mize: 218 cm x 218 cm, največja višina bloka: 116 cm. Hfedpfey N A Rwsx Alfog

Stanje: novo, Number of motors: 2 units Working length: 2380 mm Control system: RUCHSER RU-GL-45° ----- Glazing Bead Saw on Sliding Work Table Developed for simultaneous cutting of glazing beads in pairs on a sliding work table The RU-GL glazing bead saw is mounted on a sliding work table equipped with sensing and clamping devices for two glazing beads. Cutting length: min. 230 mm, max. 2380 mm. Left saw is fixed, right saw is mounted on a carriage, adjustable manually. Pneumatic top and side clamping device, two-hand safety control. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length including side extension 3300 mm, width 1400 mm, working height 800–1000 mm. Pneumatically lowerable counter supports for positioning window sashes. Pos. 1: RU-GL twin 45° glazing bead saw on RU-SA-3000 ----- For glazing beads up to 30 x 70 mm (W x H)!!! Mounted on the sliding work table with sensing and clamping device for two glazing beads. Cutting length: min. 230 mm, max. 2380 mm. Left saw fixed, right saw manually adjustable on the carriage. Pneumatic clamping from above and side, two-hand safety control. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side tray 3300 mm, width 1400 mm, working height 800–1000 mm. Pneumatically lowerable counter supports for sash positioning. ----- Hjdpfsxmkz Njx Alfsfg Base price as configured above: upon request! ----- Ex works, excluding packaging, shipping, and current material cost surcharge of 6% of total price Options at a surcharge: ----- Pos. 1.1 1 set carbide-tipped saw blades for glazing bead saw RU-GL D = 200 mm, 64 teeth, consisting of 1 blade L1233 (left) and L1085 (right), special grind 43°. Surcharge: 502.00 Euro Pos. 1.2 Holder for measuring template on RU-GL for transferring measured values to the saw, with pneumatic installation. Surcharge: 635.00 Euro Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. measuring length approx. 2450 mm Gauge made from square profile with 2 fixed and 2 adjustable cams for measuring glazing bead length Surcharge: 497.00 Euro Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. measuring length approx. 1430 mm Gauge made from square profile with 2 fixed and 2 adjustable cams for measuring glazing bead length Surcharge: 445.00 Euro Pos. 1.5 Shim set for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after review of glazing beads. Depending on the number of glazing bead types used, several shim sets may be required. To determine the exact quantity, we require profile drawings of the glazing beads before confirming your order. Surcharge: on request, after receipt of your glazing bead drawings Pos. 1.6 Operating time switching unit for standalone extraction system. Adjustable from 5 sec. to 3 hrs. Extraction operates automatically for the set time with each sawing operation. If another cut is made during the extraction period, the timer resets. Surcharge: 731.00 Euro ----- Total price ...

Stanje: rabljeno, Leto izdelave: 2001, maks. širina reza: 5300 mm Hjdoy I Dfgspfx Alfsfg maks. višina reza: 2200 mm premer žaginega lista: 300 mm maks. debelina obdelave: 80 mm premer izvrtine žaginega lista: 30 mm spodnja podpora: fiksna valjčna podlaga podlaga za material: zaprta lesena podlaga merilni sistem: digitalen nagib žagine glave: ročno odsesavanje: zunanje odsesavanje zaklepanje žaginega nosilca: ročno teža ca.: 1500 kg dimenzije: 6300 x 1500 x 2900 mm moč motorja: 5,5 kW Lokacija skladišča: Dobavitelj

Stanje: rabljeno, Leto izdelave: 2002, maks. širina reza: 4300 mm maks. višina reza: 2200 mm premer žaginega lista: 300 mm maks. debelina obdelave: 80 mm odprtina žaginega lista: 30 mm merski sistem: merilo nagib žagine glave: ročno podajanje žage: ročno odsesavanje: zunanje odsesavanje zaklep žaginega nosilca: ročno teža ca.: 1200 kg dimenzije: 5300 x 1200 x 2900 mm moč motorja: 5,5 kW Skladiščna lokacija: Dobavitelj Hfodpfx Aley I Dd Ajfjg

Stanje: rabljeno, Leto izdelave: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting panel-shaped wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine: - Fully welded frame with extremely high rigidity - Precise guidance of the saw beam/saw unit for accurate cuts. Automatic feed for vertical and horizontal cuts. Maximum cutting depth: 60 mm Saw beam: - Robust saw beam guided on precision rails. Pneumatic locking of the saw beam at both bottom and top positions. Electrically monitored during vertical cuts. Saw unit: - Smooth and ergonomic operation for plunging in and out of the saw unit. The plunge lever can be folded in the upper position for precise immersion of the saw unit. Generously sized levers for easy swiveling. Housing cover opens for full access to the saw unit, allowing easy tool changes with ProLock quick-release chuck. Viewing slot: riving knife can be retracted. Automation functions: - Automatic plunge, cut, retract, and stop or - Automatic plunge, cut, retract, and return - Shortened return path (selector switch) - The shortened return capability of the saw beam eliminates unnecessary movement of the saw unit (when short workpieces are positioned on the right) Speed control: stepless from 6 – 24 m/min Cutting depth: max. 60 mm Control panel: - Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: - Sturdy, wear-free stainless steel support. Support extends to the cutting line: Narrow workpieces cannot tip over or fall through. Extraction: - Effective dust extraction with two ports: Saw unit Ø 120 mm, machine frame end Ø 100 mm (for TRK variant) Lift-roller transport system: - Manually raisable and lowerable rollers for easy and material-friendly panel transport. Measuring tape: - For displaying measurements of horizontal cuts with three manual indicators: - Absolute measurement from the lower workpiece support - Absolute measurement from the middle workpiece support - Series cuts from the top edge of the panel Power package: - The package includes the following options: 1. TRK extraction device 2. SuperCut scoring unit 3. Digital vertical display 4. Stepless speed control * Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Hsdpfxoyuld Aj Alfjfg Includes carbide-tipped circular saw blade Ø 250 x 30 x 3.2 mm, 48 teeth, hollow flat tooth * TRK system according to CE Guidelines SH 2200 (less than 2 mg of fine dust/m³ air) – required for all CE countries (extraction system provided by customer) Pneumatic shifting grid: - Continuous shifting grid along the entire length of the machine for stable workpiece positioning. Automatically, pneumatically retracted during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. * Digital measurement display for horizontal cuts at the control panel, including electronic fine adjustment. Displays: - Absolute measurement from lower workpiece support - Offset measurement from middle workpiece support - Series cuts from the top edge of the panel - Saw blade compensation (blade kerf width individually programmable) If the unit is braked at the beam...