Rofin-Sinar Laserski Vir nakup rabljenega (1.632)

Stanje: rabljeno, Leto izdelave: 2016, Type of Laser: PowerLine F100 Technical Data: Travel Paths of Linear Axes X/Y/Z Axis: 800 / 300 / 300 mm Max. Workpiece Weight: 30 kg Heating, Ventilation, Air Conditioning: Operating Temperature: 25°C +/- 10°C Storage Temperature: 5°C to +40°C Ambient Conditions: non-condensing, non-corrosive, frost-proof Air E-section: 160 m³/h Pneumatic Supply: Medium: filtered, non-lubricated compressed air Max. Permissible Operating Pressure: 6 bar Temperature Range: -10° to +60°C Laser Safety Classification: Laser Safety Class 1 according to EN (IEC) 60825-1:2007 Laser Marking Field Size: 120 x 120 mm Operating and Storage Conditions: Load Capacity of the Floor: at least 500 kg/m² Clearance Above: 2 m for ventilation Transport Height: at least 2 m Room Height: at least 2.50 m Electricity: Input Fuse (Protection): 3 x 16 A Nominal Voltage: 400 V (+/- 10%); 3P; N; PE Nominal Frequency: 50/60 Hz; Neutral Conductor loaded Power Consumption: 4 kVA (at 50 Hz) Dimensions and Weight: Width¹): 1.50 m plus swing arm max. 0.8 m (width without monitor) Length¹): 1.80 m plus swing arm 0.5 m (length without monitor) Standing Workstation Height: 1.20 m Working Height: 0.96 m (standing workstation) Required Space and Volume²): Width: 3.00 m Length: 2.50 m Height: 2.20 m (standing workstation) Area: 7.50 m² Approximate Weight: 1500 kg ¹) Width, length, and area of the laser processing machine may vary due to adjustments of the optional swing arm ²) The required area and volume do not include any traffic routes! The operator must define traffic routes around the machine in accordance with national occupational safety regulations. Operating and Storage Conditions: - No direct sunlight - Do not place near radiators - No strong temperature fluctuations - Not in areas with extreme dust exposure Fgedpfxsxqp Rde Aplob - Not in areas with extreme oil, solvent, or cleaning agent vapors

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Operating hours of the heater: 23,002 h, complete with control cabinet and documentation. Fjdpfxjnl Emme Aplsgb

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 7.000 h, laserska moč: 6.000 W, valovna dolžina laserja: 1.080 nm, trajanje garancije: 24 meseci, IPG Photonics YLS6000U – 6 kW laserski vir Stanje: Popolnoma delujoč, testiran Garancija: 24 mesecev operativne garancije Ponudba storitev: Popravilo in vzdrževanje IPG laserskih virov Zamenjava in popravilo laserskih modulov, združevalnikov žarkov in optičnih kablov Servis na lokaciji stranke, kjerkoli po svetu Fgsdpfeyy Rp Nex Aplsb Prednosti: Visokokakovosten laserski vir IPG Photonics, moč 6 kW Zanesljivo delovanje s polno garancijo Svetovna dostopnost servisa Za več informacij nas brez oklevanja kontaktirajte.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Laser power: 4000W (4kW), wavelength: 1030nm, beam quality (BPP): 8mm/mrad, beam diameter adjustment: 0.1µm, machine dimensions X/Y/Z: approx. 1000mm/1600mm/1600mm, weight: approx. 1000kg. Includes 2x scanner optics (PFO) for the process cells, 3x fiber optic cables, and spare parts. Documentation available. Inspection on site is possible. Fedpfxswwll He Aplogb

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Na voljo je laserski vir IPG s perifernimi napravami. 1) IPG laser YLS-3000-CT, letnik 2013, valovna dolžina: 1070 nm, modulacija: 0kHz-5kHz, območje regulacije moči: 10%-100%, stabilnost moči: +/-1%. Dimenzije stroja X/Y/Z: pribl. 800mm/800mm/560mm, teža: pribl. 400kg. 2) Industrijski hladilnik IPG Laser LC 170.01-A.3.5, letnik 2013, hladilna moč: 17kW, maks. delovni tlak: 28 bar, hladilno sredstvo: R407C, količina hladilnega sredstva: 3,5kg. 3) Naprava za podajanje žice Dinse DIX WD 300, hitrost podajanja: 20m/min, območje premera žice: 0,8mm-1,6mm, dimenzije stroja X/Y/Z: pribl. 300mm/250mm/250mm. 4) Glava za lasersko obdelavo. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Fodpfx Ajx H S Nwsplegb

Stanje: dober (rabljeno), Here we offer a laser beam source from Coherent, type mti PC. Model: AVIA 355-X Operating hours: Diodes 1975/1975, Head 26488 Wavelength: 355 nm Excitation: diode-pumped Laser type: Nd:YAG laser Fgedodmzhqspfx Apleb Additional laser type: THG, Q-switch Operating mode: pulsed Laser power: 10 W at 60 kHz Beam divergence:

Stanje: dober (rabljeno), Trumpf TruMicro 6 kW Laser Source High-performance disk laser with nanosecond pulses. The high-power nanosecond lasers of the TruMicro Series 7000 are based on disk laser technology, combining short pulses and high pulse energies even at high frequencies. This allows you to remove layers and contaminants at maximum speed, reducing your cycle times. Further optimize your processes by varying the repetition rate—while maintaining the same pulse duration. For efficient and economical cleaning of tire molds, the short-pulse lasers of the TruMicro Series 7000 are the ideal tool. Large-area applications with high average power Ablation, cleaning, tempering: The lasers of the TruMicro Series 7000 demonstrate their full capabilities in large-area applications. With pulse energies up to 100 mJ, they achieve remarkable removal rates. A scanner ensures excellent utilization of the available power. Flexible laser light cables deliver the beam exactly where needed and facilitate system integration. Manufacturer: Trumpf Model: TruMicro 7050 Laser Source Power: 6 kW Cooling: Water System input power: 380–460 VAC, 3 phase Laser output: 750 W Wavelength: 1030 nm Pulse energy: 80 mJ Pulse duration: 30 ns Beam quality: 20 mm Repetition rate: 5 to 100 kHz Fiber diameter: 400 µm IP rating: 54 Dimensions (W x H x D): 1460 mm x 1350 mm x 730 mm Financing through our partner bank is available. komplett-konzept.leasingo.de Find more products—new and used—in our shop! Fgodpfx Apexaktljleb International shipping costs available on request!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 10.700 mm, laserska moč: 30 W, Laser engraving machine with 30-watt laser power - Laser source: 30-watt CO2 metal tube Fedpsirmgmjfx Aplsgb Demonstration unit with minimal operating hours - incl. Windows 10 Pro 64-bit PC system - incl. 22" monitor - all software pre-installed and calibrated - Engraving software in German - Very easy to operate - Switch on and start engraving right away - CO2 laser source with 30 watts for high-contrast and fast markings with extremely high resolution - Deep engraving capability - Wobble function - Suitable for engraving e.g. on wood, plastic, anodized surfaces, etc. - Heavy-duty industrial quality - Complete system / immediately ready for operation - Working area approx. 500 x 600 x 600 mm (L x W x H) - Mounting surface with threaded holes in 50 mm grid - LED workspace lighting - 50 mm duct connection for smoke extraction - Engraving area approx. 180 x 180 mm - Expandable up to approx. 300 x 300 mm - incl. foot switch to start engraving Please also note our attractive leasing/financing offers. Sale exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 150 kg

Stanje: novo, Leto izdelave: 2025, dolžina gredi: 1.070 mm, laserska moč: 60 W, vrsta hlajenja: zrak, Laser engraving machine with 60-watt laser power New demonstration unit - 60-watt MOPA laser (enables color laser engraving on stainless steel) - incl. 4th axis (rotary unit) - incl. Windows 10 Pro 64-bit PC system - incl. 22" monitor - fully installed and calibrated - German-language engraving software - very easy to operate - switch on and start working - Fiber laser source with 60 watts for high-contrast, fast marking with extremely high resolution (see photos) - Deep engraving up to 4mm possible (including on hardened steel) - Wobble function, e.g. for cleaning metal components - For engraving on many metals (stainless steel, brass, aluminum, etc.) and a wide variety of plastics - Heavy-duty industrial quality - Complete system / ready for immediate use - Workspace approx. 500 x 600 x 600mm (L x W x H) Fgodpefkgq Nsfx Aplob - Clamping surface with threaded holes in a 50mm grid - LED workspace lighting - 50mm pipe connection for fume extraction - Engraving area approx. 180 x 180mm - Expandable up to approx. 300 x 300mm - Incl. foot switch to start the engraving process Please also ask about our attractive leasing/rental purchase offers. Sale exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 150kg

Stanje: rabljeno, Leto izdelave: 2005, Napisi polje 120 x 120 mm Velikost mize 250 x 250 mm Največja teža obdelovanca 50 kg Krmiljenje Fobagraf Teža stroja cca. 1000 kg Ohišje stroja iz varjene jeklene konstrukcije Navzkrižni drsnik, izvedba iz trdega kamna, mizna plošča s prislonoma iz jekla Po višini nastavljiva laserska glava Kakovostno krmiljeni ND:YAG laserska glava, črpana s svetilko, 100 W Odbijalska enota nameščena na laserski glavi (s standardnim objektivom) Z-os z menjalnikom in servo pogonom Servokrmiljenje osi z X-, Y- in Z-osjo Hlajenje z vodo Fgsdpfxsylcqho Aplob Krmiljenje: uporabniški programski paket Fobagraf Operacijski sistem Windows 2000 Ur vklopa: 17.388 h Navodila za uporabo priložena

Stanje: kot nova (razstavni stroj), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, skupna masa: 122 kg, LASER LIKE NEW, USED ONLY FOR TESTS AND DEMOS Laser cutting and engraving machine for the signage and promotional marketing industry - made in USA ▪ CO2 laser tube in sealed metal housing, 25 KW power, air cooling, wavelength 10,640 nm, approximate lifespan of 30,000 working hours. ▪ The laser source can be quickly replaced using the ‘Quick-Change’ system, without technician intervention or the need to realign the laser beam. Universal only manufactures sealed RF-excited (Radio Frequency Excited) CO2 laser sources, which offer constant power and require no maintenance. ▪ Maximum material dimensions: 737 x 584 x 229 mm, but larger materials can also be processed thanks to the open front panel ▪ Working area: 610 x 457 mm ▪ Honeycomb cutting table - minimizes contact between the material and the reflective engraving bed, and more effectively removes particles and fumes generated during cutting ▪ Maximum supported material weight: 18 kg ▪ Equipment dimensions: 914 x 965 x 914 mm ▪ Power supply: 220 – 240V / 5A The package includes the following options: ▪ BOFA filter, 400 m3/h airflow - allows use even in enclosed commercial spaces ▪ 2.0” (5.08 cm) focal lens with 0.125 mm focal point diameter ▪ HPDFO focusing lens + beam collimator. Focal length: 2.0” (5.08 cm), focal point diameter: 0.025 mm – Suitable for marking metals Fsdpfjytdtyex Aplsgb ▪ Rotary attachment included - maximum diameter of object: 203 mm ▪ “Air-Assist” cooling and cleaning system - supplies a jet of clean air over the surface to suppress flames and improve engraving/cutting quality. Also helps keep optical components (mirrors and lens) clean ▪ Metal cone for 90-degree air direction onto material ▪ Back-Sweep - hose for 45-degree air direction onto material ▪ 2 bar pressure compressor – PICCOLINO brand, delivers clean air for "Air-Assist" system ▪ ‘Laser Interface+’ operational software – user interface allowing automatic or manual control of power, feed rate, laser pulses (PPI), and other system settings. Includes a material database with predefined settings for different materials: simply select the material type and the driver loads the optimum cutting/engraving settings. You can save, store, and load settings for materials not included in the standard database. For maximum processing efficiency, the interface can estimate the remaining time until engraving or cutting is finished. ▪ Additional 1Touch Laser Photo software – for very fine engravings, including complex image engraving.

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, loèitev (maks.): 1.000 DPI (pik na palec), laserska moč: 80 W, obratovalna hitrost: 3.200 mm/s, dolžina mize: 600 mm, širina mize: 1.000 mm, številka stroja/vozila: JL2022059, DÉTAILS TECHNIQUES Longueur de table : 600 mm Largeur de table : 1 000 mm Vitesse de coupe : 21 120 mm/min Vitesse de fonctionnement : 3 200 mm/s Hauteur de pièce à usiner (max.) : 230 mm Puissance du laser : 80 W Résolution (max.) : 1 000 dpi Type de laser : Laser CO2 DÉTAILS DE LA MACHINE Alimentation : 230 V Fjdpfx Ajx E Snwjplegb Dimensions & Poids Dimensions : 1 480 x 900 x 1 120 mm Poids : 300 kg ÉQUIPEMENT Compresseur Accessoires JustAir PRO Dispositif de gravure rotative pour JL 7.5 et 10.6 Table de découpe à grille aluminium avec fonction vide Éclairage intérieur LED Autofocus avec capteur Microsonic Système informatique avec Mini PC Intel i7-8569U 8e génération pour le contrôle de la machine Table (SogesFurniture BHEU-101-OK) Chaise (Tabouret de bar WOLT BH113an) Supports et périphériques (Écran incurvé Samsung C24F396FHR, 24 pouces) Kit air comprimé, extension pour air comprimé externe incl. compresseur et tous les tuyaux

Stanje: novo, Leto izdelave: 2025, The skyCUBE M laser processing center – the new benchmark in laser material processing! PFEIFER Laser Processing Center skyCube M Laser machine with 200W CO2 laser – available immediately Mclass = Processing area X 1250 x Y 650 x Z 300 mm skyCUBE M Laser Processing Center – the new Mclass multifunction laser engraving and cutting machine – easy laser processing, high precision – laser engraving and cutting with high speed and quality. Our new and best multifunctional system impresses even the most experienced user with its innovative design. This CO2 laser/fiber laser demonstrates outstanding performance in all industrial applications as a CO2 or fiber engraving laser as well as a CO2 or fiber cutting laser. With an optional laser power of up to 1000W (1kW), the CO2 laser device/fiber laser system is extremely versatile for use in your production environment. skyCUBE laser units comply with all requirements of Class 1 according to DIN EN 60825-1, offering you maximum safety. Depending on the selected and installed laser power, this CO2 laser/fiber laser is perfectly suited for cutting and engraving a wide range of materials such as metals, acrylic glass, solid wood and wood composites, wood-based materials, paper, cardboard, various plastics and foams, textiles, and much more. The excellent engineering – 100% produced in Plauen – guarantees users from metal fabrication to laser source a high working accuracy with consistently high quality. With cutting speeds up to 8000 mm/s and engraving speeds up to 4000 mm/s, the advanced laser technology ensures clean, ultra-sharp cutting edges and precise laser engravings. The ergonomic design featuring a pull-out worktable simplifies loading the machine. A drawer in the lower section collects processed material efficiently. User-friendly and intuitive – the included skyCUBE PC software (ready for Windows®). A straightforward, practical user interface adapted to the Windows standard enables fast and effective operation. High system stability, professional monitoring, efficient machine operation and control, as well as compatibility with conventional file formats characterise the software. Data output is organised by layers – each layer defined separately, including sequencing and process type. Parameters such as laser power and processing speed are automatically stored for each layer and can be retrieved from a materials database at any time. Laser projects are transmitted to the skyCUBE M processing center via a computer connected through LAN/USB interface. Projects can be executed repeatedly, even without the PC being on. Fodpfe Sfanex Aplsgb A modern touch control panel provides access to all system information and functions. skyCUBE M Laser Processing Center at a glance: - German industrial-standard welded steel construction for secure and vibration-free mounting of laser components and axis systems, equipped with mobile industrial leveling feet - 8" touchscreen display – better overview, more control, enhanced communication with the skyCUBE M laser processing center - Redundant safety system – Class 1 laser

Stanje: novo, Leto izdelave: 2025, Are you looking for a real machine and not a toy? Then you’re in the right place: Fiber Laser Engraver Large Format X1130 x Y665 x Z260 mm skyLaser Mark Laser Marker – 2D, optionally 3D. This fiber laser engraving/marking system is the complete solution for your complex laser engraving applications. Important: Compare the components installed in the laser systems offered! Our systems feature Scanlab® scanners, IPG Photonics® lasers, Parker® axes, Schneider Electric® motors, Scanlab® controllers, German software, wiring—every component is German-made! Laser systems are manufactured 100% to customer specifications at our factory in Plauen. Fedpsf U Spxsfx Aplsgb Competitors often use Chinese components (it starts with the controller: EZCAD = Chinese origin!) (* Prices vary depending on configuration—this is a brand-new laser machine, manufactured in-house) Our skyLaser Mark systems are used precisely where conventional CO2 laser technology reaches its limits. The 1064 nm fiber laser enables even the most intricate structures to be produced in almost any material. Unlike traditional milling processes, laser processing is contactless, force-free, and causes no tool wear. Key advantages for your application include geometric flexibility and high machining precision. This processing method can be applied regardless of the hardness of the workpiece. With the adjustable, mobile workstation tailored to your requirements, system flexibility is further increased. The system can be seamlessly integrated into your production line or used as a stand-alone solution. Our skyLaser Mark delivers highly precise and permanent markings (laser engravings), optimized especially for the laser application areas of metal and specific organic materials. A wide range of fonts, application of barcodes, serial numbers, logos, and images are easily possible. Thanks to outstanding resolution, virtually any marking requirement can be met. Applications include the production of embossing stamps, engravings, markings, and complex, delicate structures. The software is extremely user-friendly. Even very complex and demanding marking jobs can be effortlessly created on the included industrial PC. Exact positioning is a breeze thanks to the optional process-monitoring camera and software-driven workpiece alignment. With almost no wear parts and the virtually maintenance-free IPG laser technology, this system is especially well-suited for industrial applications and continuous operation. skyLaser Marking Laser Engraver at a glance: - Work area: starting at 110 x 110 mm or 120 x 120 mm – or the fiber laser engraver large format with integrated axes X1130 x Y665 x Z260mm - Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) - SCANLAB SCANcube galvanometer scanner - Nominal laser power: 20W - New: Software-controlled, variably adjustable working height (Z axis, max. 260 mm, depending on configuration) - Optional: other working areas, automated material feed, etc.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, OEM – Marking Laser / Engraving Laser (with CO2 Laser Source) The source of the complete system is a 30-watt CO2 laser with a wavelength of 10,060 nm. The standard marking area is approximately 140 x 140 mm; optionally, up to 300 x 300 mm is possible. No external cooling is required. Power supply: 110...240 VAC / 50 Hz. Applications include laser engraving and material removal. The control software EzCad is installed on the included laptop, with selectable languages (German, English). Optionally, the laser marker can be equipped with a manually adjustable Z-axis. The laser is prepared for integration into a higher-level system but can also be operated as a stand-alone unit. For integration, interfaces are available for interlock, emergency stop, external laser control, etc. We are happy to support our customers in accordance with their requirements. Fodpfx Apopyg N Ajlegb

Stanje: novo, Leto izdelave: 2024, Workpiece size: 200 x 200 x 200 mm Travel path (X): 110 mm Travel path (Y): 110 mm Laser engraving machine 20 W Anseat Enclosed system with ample interior space to engrave workpieces sized 200 x 200 x 200 mm. Technical Data: - Fiber laser power: 20 W - Wavelength: 1064 nm - Laser source: Raycus - Supported graphic formats: PLT, BMP, JPG, PNG, TIP, PCX, TGA, ICO, DXF - Pulse frequency: 20 – 100 kHz - Power consumption: < 800 W - Cooling: Air Fgedswgn D Depfx Apleb - Voltage: single-phase, 230 V +/- 10% - Engraving area: 110 x 110 mm - Minimum line width: 50 μm - Smallest character: 0.3 mm - Focusing aid with 2 LED pointers

Leto izdelave: 2000, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 00051523, A 3D laser scanner is being offered Brand: VIRTEK LASER QC Type: LPS-1DS Used, in working condition. Collection by the buyer; assistance with disassembly/transport can be arranged if required. Fgodpex Dbdisfx Aplsb If you are interested or have any questions, feel free to send me a message. On-site inspection by appointment is possible. Further metal processing machines available, such as bench drills, press brakes, column drills, eccentric presses, heavy-duty shelving, welding tables, MIG/MAG welding machines, compressors, etc. – please check my other listings. Domestic price: net plus VAT or Net export Pick-up only – disassembly and transport by the buyer or by agreement If you are interested or have any questions, please feel free to send me a message. Additional photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration formalities for an additional fee. Delivery to the port available for an additional fee.

Leto izdelave: 2021, stanje: rabljeno, Proizvajalec: Thémis Technologies Model: 5173 TT Leto: 2021 Tip: UV laserska označevalna postaja Laser: Keyence MDU1000C Uporaba: Oprema je zasnovana za lasersko označevanje različnih izdelkov iz različnih materialov. - Steklene ali plastične posode različnih premerov - Barvne plastične steklenice različnih velikosti Fgedpsx R Aqtefx Aplob - Barvne plastične tube Funkcije, ki jih izvaja ta oprema: - Prevzem proizvoda s transportnega traku. - Detekcija proizvoda na vhodu v stroj. - Premik proizvoda do laserja. - Ob zaznavi steklenice, aktivacija sesanja in laserskega označevanja. - Izmet označenega proizvoda. Na zunanji strani kabine je ob strani nameščen sesalec Bofa Ad Access in priključen na šobo v bližini območja označevanja. Višina: 2150 mm (z zaščitnimi stekli) Širina: 1250 mm (brez zaslona) Dolžina: 2530 mm (s transporterjem) Vključena oprema: tiskalnik, kontrolni računalnik, ... Na voljo dokumentacija, risbe, varnostne kopije, programska oprema.

Stanje: dober (rabljeno), Leto izdelave: 2007, dolžina gredi: 1.064 mm, Interna številka artikla: 26037 Laserski varilni aparat Rofin Starweld 90 Leto izdelave: 2007 YAG laser Moč: 4,5 kW Moč laserja: 90 W Vrhunska pulzna moč: 5,5 kW Čas trajanja pulza: 0,3 - 20 ms Valovna dolžina: 1064 nm Mere (D x Š x V): 100 x 50 x 100 cm Fgjdpfx Apjy D Nlqjljb Mere brez mize in nadgradnje Teža: pribl. 170 kg Stroj je popolnoma delujoč in ga je možno po dogovoru ogledati pod napetostjo na več kot 500 m² ogrevanih skladiščnih prostorih.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nefunkcionalno, Industrijski CO₂ ploščni laserski resonator Rofin DC 025 Proizvajalec: Rofin Tip: DC 025 Obratovalna moč: neznana Nazivna moč: 2500 W Območje moči: pribl. 250 – 2500 W Fodpfx Asy Dubdeplogb Tip laserja: CO₂ plošča (difuzijsko hlajen) Vzbujevalni način: visoka frekvenca (HF) Način delovanja: neprekinjen (CW) + pulzni način Parametri žarka Valovna dolžina: 10,6 µm Premer žarka: < 25 mm Kakovost žarka (K-faktor): > 0,8 Divergenca: < 0,5 mrad Stabilnost: ±2 % (v 24 urah) Dimenzije (D × Š × V): pribl. 1700 × 800 × 850 mm Teža: pribl. 500 kg

Stanje: rabljeno, Leto izdelave: 1990, Usata Sciacquatrice Revisionata Fgsdpfsvgvwasx Aplsb La Sciacquatrice Usata Revisionata Virmauri, costruita nel 1990 e sottoposta a revisione, è una macchina industriale dedicata al trattamento dei contenitori in vetro. Con una capacità operativa di 7.000 bottiglie all’ora (BPH), il dispositivo adotta un sistema di 28 pinze per ottimizzare i processi di risciacquo. Operando in senso orario, questa unità è dotata di ugelli mobili che permettono flessibilità nel trattamento specifico di ogni contenitore. Meccanica e Funzionamento Dal punto di vista meccanico, il dispositivo adotta un approccio di trattamento a singolo passaggio, utilizzando l’acqua come principale agente di pulizia. Questa scelta, pur semplificando il processo, impone requisiti rigorosi sulla qualità dell’acqua impiegata e sulla manutenzione degli ugelli, al fine di prevenire contaminazioni incrociate. La rotazione in senso orario e la disposizione delle prese sono state studiate per ottimizzare il flusso di lavoro e minimizzare i tempi di fermo durante i cambi di lotto produttivo. Questi aspetti tecnici richiedono un’attenta valutazione in fase di integrazione della macchina nelle linee produttive esistenti. Stato Attuale e Manutenzione della Sciacquatrice Usata Revisionata Per quanto riguarda lo stato attuale della Virmauri, la sciacquatrice usata revisionata è classificata "In pronta consegna", indicando disponibilità immediata per installazione e utilizzo dopo la revisione. La Sciacquatrice Usata Revisionata ha subito un intervento di revisione per garantirne la funzionalità e l’affidabilità nel tempo. La gestione della manutenzione richiede un approccio meticoloso per assicurare la disponibilità dei ricambi e le competenze tecniche necessarie per interventi rapidi. Conclusioni sull’attrezzatura sciacquatrice Virmauri: In conclusione, la sciacquatrice Virmauri del 1990, con 28 pinze e una capacità di 7.000 BPH, rappresenta un’opzione tecnologicamente valida per le aziende del settore imbottigliamento che necessitano di un’unità efficiente e affidabile per il trattamento dei contenitori in vetro. La decisione di acquisire una macchina di questa tipologia richiede un’analisi dettagliata delle esigenze produttive, della compatibilità con le linee esistenti e delle capacità di manutenzione interna, per garantire un’integrazione e un funzionamento ottimali. Possiamo garantire un servizio completo su questa attrezzatura Virmauri con il nostro personale specializzato.

Stanje: pripravljen za uporabo (rabljen), Na voljo sta dve skoraj enaki laserski napravi Rofin. Valovna dolžina: 10600nm, delovna moč: 4kW, največja impulzna moč: 8kW, trajanje impulza: 0,5ms, tip laserja: CO2 slab laser, hlajenje: difuzijsko hlajenje, največja pulzna frekvenca: 5000Hz, polarizacija: linearna, vzbujanje: RF, tip plina: premix. Dimenzije stroja X/Y/Z: cca. 2300mm/1000mm/1900mm, teža: cca. 1700kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Fgodoydp Auspfx Apleb

Stanje: dober (rabljeno), Leto izdelave: 2000, Dolžina mize: . mm Širina mize: . mm Fgsdpfx Apsqn A Rysleb Rezalne glave: . Kosov na zalogi: 2 Skupna priključna moč: . kW Približna teža stroja: 1478 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, obratovalne ure: 10 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 50022358, laserska moč: 200 W, skupna masa: 1.000 kg, Stroj nikoli ni bil v uporabi, zato je kot nov. Sam ga še nisem zagnal, zato ne morem veliko povedati o njem. Če kupec pozna ta stroj, ga je možno pred nakupom priključiti na elektriko. Fgedpfx Apox It Abslsb

Stanje: skoraj kot novo (rabljeno), Hlajenje za laser Rofin RoHS WKH/W-13000-W-MC-SON-3-D Krmilnik Rofin LasCon WaC 2 Termostatski regulator Störk Tronic Magnetni ventili Buschjost 400 Voltov Neuporabljeno skladiščno blago Možnosti financiranja preko naše banke. komplett-konzept.leasingo.de Več novih in rabljenih artiklov - v naši trgovini! Fodpsq Hdw Ujfx Aplegb Stroške mednarodne dostave na zahtevo!