Rehm Sistem Za Obločno Varjenje V Plinu nakup rabljenega (106.247)

Stanje: rabljeno, Leto izdelave: 2000, Tok do 300 A Gorilne glave. Cgedpfx Ageyacp Heqsw Potreben prostor pribl. ... m

Stanje: rabljeno, Leto izdelave: 2000, Tok do 350 A Gorilne glave. Prostorska zahteva cca ... m Csdoyacpyepfx Agqjgw

Stanje: rabljeno, Leto izdelave: 2009, Letnica izdelave je okvirna: 2009 Cgodpsx U A Ruefx Agqjw Električni tok: 300 A Premer žice: 1 mm Stroj je takoj pripravljen za uporabo Št. stroja: 239836 +++++ Upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega preizkus pod napetostjo ali izdelava videoposnetka nista mogoča. Poleg tega naš oglas vsebuje najizčrpnejše fotografije najboljše možne kakovosti. Dodatnih slik, žal, ni mogoče poslati.

Stanje: novo, Max welding current: 200 A Open-circuit voltage: 14 - 24 V Input voltage: 230 V Weight: 25 kg Dimensions (LxWxH): 500 x 200 x 300 mm Accessories: • Hose package • Ground cable • Welding nozzles Cgodpfx Agog U Tcceqow

Stanje: skoraj kot novo (rabljeno), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Ranges (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% full scale): 1% full scale: 1.0 ms 10% full scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Position Resolution (max.): 18 bit for XY, 16 bit for Z* Non-linearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min.): Offset: < 50 µrad Gain: < 50 ppm Electronics / Control Control: Galvanometer scanner with digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostic Features: Yes (iDRIVE) Supply Voltage: (48±2) V DC, up to 10 A each (20 A peak current) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Housing Versions: Scan head Connector Positions: Opposite beam exit Weight (without lens, standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See image) Csdpfx Aszikcfogqegw (Specifications subject to change and errors excepted!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. We are happy to answer further questions by phone.

Stanje: skoraj kot novo (rabljeno), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Ranges (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% full scale): 1% full scale: 1.0 ms 10% full scale: 4.5 ms Cjdpfx Ajzikb Uogqogw Accuracy Repeatability (RMS): < 4 µrad Position Resolution (max.): 18 bit for XY, 16 bit for Z* Non-linearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min.): Offset: < 50 µrad Gain: < 50 ppm Electronics / Control Control: Galvanometer scanner with digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostic Features: Yes (iDRIVE) Supply Voltage: (48±2) V DC, up to 10 A each (20 A peak current) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Housing Versions: Scan head Connector Positions: Opposite beam exit Weight (without lens, standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See image) (Specifications subject to change and errors excepted!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. We are happy to answer further questions by phone.

Stanje: rabljeno, lahko se uporablja za paniranje ali pomokanje (samo suhi premazi) Csdpfx Agjzc E Nuoqjgw idealno za nepravilne oblike v celoti iz nerjavečega jekla brezstopenjska regulacija hitrosti premično izhodni trak širina traku 400 mm zunanje dimenzije (D x Š x V): pribl. 3.000 x 1.600 x 1.900 mm

Leto izdelave: 2010, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Sealpack Tunnel/Interdibipack Film Packaging Machine Manufacturer: Quick Pack Group Model: Tunnel-Sealpack Type: P0721/8.5 kW Csdox Ak U Uepfx Agqjgw Year of Manufacture: 2010 Condition: used Color: orange Internal Article Number: 2025120102 Collection Address: Industriestraße 5 (47918 Tönisvorst) The machine was operational until dismantling. Tailor-made Solutions for Your Intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods as well as packaging machines, we are your competent partner! We will be happy to provide you with a customized offer or consult you on design and installation questions. Simply let us know your requirements and on-site conditions. Benefit from our many years of experience and our excellent network of specialists. For companies from various sectors, such as logistics, the pharmaceutical industry, trade, or electronics, we have already successfully completed projects. Together, we will develop ways to optimize your workflow and material flow cost-effectively and sustainably. We can even offer fully automatic sorting systems or supplementary components such as picking racks or containers.

Stanje: rabljeno, Coil Processing Line – Decoiler and Straightening Machine Year of Manufacture: 1991 Strip Width: 50 to 450 mm Sheet Thickness with Straightener Disengaged: 6 mm Sheet Thickness with Straightener Engaged: 2 mm - Excellent equipment and feeding aids Required floor space (L x W): approx. 7,000 x 3,000 mm Total weight: approx. 11 tons Condition: Good Straightening Machine, HMS Type RS 47-04/1, Serial No. Strip Width, Nominal: 400 mm Strip Width, Max. Passage Width: max. 455 mm Strip Thickness at 400 mm width (steel): max. 1.5 mm Strip Thickness at 400 mm width (copper): max. 2 mm Speed: max. 40 m/min Number of Straightening Rolls: 7 pcs Straightening Roll Diameter: Ø 40 mm Number of Feed Rolls: 2 pcs Feed Roll Diameter: Ø 80 mm Infeed/Throughput Height: 1,500 mm - Straightening rolls hardened, ground, and hard-chromed, supported centrally - Feed rolls hardened, ground, and hard-chromed, with hydraulic lift - Manual straightening roll adjustment - Infeed aid with hydraulically extendable tongue and hydraulically adjustable guide roller - Adjustable side strip guides - All straightening rolls driven via distributor gearbox and cardan shafts - Both feed rolls driven via gearbox and cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or processing thicker material, stroke movement by trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3,600 x 2,200 x 2,200 mm Net weight: approx. 4 tons Decoiler, HMS Type BA 1.5-06/80, Serial No. Coil Weight: max. 8,000 kg Outside Coil Diameter: max. 1,600 mm (with loading saddle) Outside Coil Diameter: max. 2,000 mm (without loading saddle) Coil Flange Diameter: Ø 1,700 mm Inside Coil Diameter, Expansion Range: 460–520 mm Coil Width, Nominal: max. 630 mm Expansion Jaw Width: 750 mm Height of decoiler head above base plate: 1,500 mm - Decoiler head driven by hydraulic motor and gear - Pneumatic overrun brake on decoiler head TWINFLEX - Hydraulic expansion of decoiler head via central wedge slider system - Hydraulic hold-down arm with double pendulum roller, hydraulically driven - Coil loading saddle with 12 t lifting capacity and 300 mm stroke - Decoiler on overfloor travel frame with motorized cross travel Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Net weight: approx. 5 tons Central hydraulic unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1,600 x 850 x 1,450 mm Net weight: approx. 800 kg Electrical control cabinet (adjacent) Cjdpfxeif Sg Sj Agqjgw - All cable connections via Harting connectors Transport dimensions (L x W x H): 2,800 x 500 x 2,250 mm Net weight: approx. 800 kg

Stanje: dober (rabljeno), Shielded gas welding machine, shielded gas welding unit, arc welding system, MIG/MAG welding system - Max. welding power: 400 A - Wire feed: 4-roll drive - Design: Water-cooled - Accessories: includes ground cable, detachable wire feeder, gas regulator, 4 m hose package - Quantity: 1 unit available Cgedpfx Aswl Dptogqow - Dimensions: 500/1010/H1600 mm - Weight: 162 kg

Leto izdelave: 2011, stanje: dober (rabljeno), Ponudba 24370 Naprava za filtracijo mulja v kontejnerju za pomorski transport + transportni trak Tehnični podatki: - Filter stiskalnica za mulj JUNGHANS z valjasto enoto - Flockulacijska naprava - Črpalke - Ločen transportni trak za odvoz mulja, dolžina 8,0 m Cgodpot Srkpofx Agqew - Krmilna omara z električno napeljavo - Aluminijasta posoda za zbiranje vode po celotnem dnu kontejnerja - Razsvetljava - Ladijski kontejner s 4 vrati - Potrebna površina kontejnerja cca. Š 6,0 x V 2,4 x G 2,4 m - Teža cca. 5000 kg - Potrebna površina transportnega traku cca. Š 8,0 x V 0,8 x G 1,0 m - Teža cca. 1000 kg

Stanje: dober (rabljeno), 1 x Sistem za tehtanje in pakiranje Sestavljen iz: - VFFS pakirni stroj, 10-glavna večglava tehtnica, vedro dvigalo, odvodni transporter, ICE tiskalnik, mostna ograja na 3 straneh. Codpszgc H Djfx Agqogw Specifikacije Cyclone 200B: Maksimalna hitrost 80 vreč na minuto Širina vreče 60–200 mm Dolžina vreče 50–280 mm Napajanje 3 faze, 0,375 kW Priložen ICE tiskalnik *Prosimo upoštevajte, da naprava nima stopnic – vključene so le mostne ograje na 3 straneh* *UKFM lahko pripravi ponudbo za demontažo sistema in dostavo na britansko celino*

Stanje: rabljeno, Leto izdelave: 2015, ObločnI varilni stroj za spajanje kolutov Tip: LBS043 / 80 / 1.5 Stroj za spajanje kolutov. S Fronius Trans Tig 2200 Job G/F ObločnI varilni stroj. Csdpfx Aolddxhsgqsgw Pnevmatsko vpenjanje. Upravljanje preko Siemens HMI zaslona na dotik. Leto izdelave: 2015. Širina koluta/traku do 80 mm. Rabljeni stroj v delujočem stanju. Širina traku: 15 – 80 mm. Debelina traku: 0,5 – 1,5 mm. Moč: 400 V / 50 Hz. Vključno z navodili za uporabo v nemščini, shemami in embalažo. Dostava iz zaloge. Na zalogi več rabljenih strojev proizvajalcev Ideal BAS 050 BAS 100 in 120, Bruderer, Schaal, Mabu, Bihler...

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Our powerful sandblasting cabinet "MM 2010" operates using the pressure blasting method and is suitable for all types of blasting media thanks to its innovative media recirculation system. The bucket elevator, which is firmly connected to the blasting cabinet, allows even the heaviest media types, such as stainless steel shot, steel cast grit, and other metallic abrasives, to be used without issue. Unlike competing systems, the abrasive is not vacuumed back but transported to the adjacent bucket elevator using a flat conveyor system. The bucket elevator lifts the material upwards and deposits it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed blasting media recirculation and recycling system ensures continuous abrasive supply regardless of the extraction system’s suction capacity. Cgodpfjwc Nrnsx Agqew Thanks to the recirculation system for blasting media and innovative fan technology, the blasting cabinet features very low energy consumption (0.75 kW fan motor). Because the abrasive is not vacuumed back, there is no need for an oversized dust extraction system with high power consumption, as is required by many competing systems. For maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure vessel. This vessel includes a pressure regulator for infinitely adjustable blasting pressure, ranging from 0.1 to 12 bar. For safe operation, a water separator is permanently installed on the blasting pressure vessel, protecting the blasting media from moisture. The pressure blasting nozzle is made from highly wear-resistant boron carbide, enabling service lives of up to 1,000 hours depending on the abrasive used. The blasting chamber is lined with wear-resistant rubber, which enhances the service life of the blasting media and protects the cabinet from wear. An air blow gun is installed for cleaning blasted workpieces and the interior walls of the cabinet. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber and maximum service life for the blasting media. The dedusting unit features continuous filter cartridge cleaning by means of pulse-jet compressed air, ensuring long filter service life and consistently stable extraction performance in the long term. Loading of the blasting chamber is carried out via an angled front flap which swings fully upwards, allowing loading by forklift or crane. The robust working grating supports up to 500 kg. To ensure optimal visibility inside the chamber, two powerful and energy-saving LED lights are mounted on the cabinet roof, dust- and wear-protected by their rooftop installation. The system is operated via a modern touch display. For safe operation, the blasting cabinet is fitted with a door safety switch. The installed viewing windows are made of toughened safety glass (ESG) and protected with a wear-resistant film.

Leto izdelave: 1988, stanje: rabljeno, Bihler B-4/2 Sistem za varilno krmiljenje. Priključek: 400 V, 50 Hz. Opremljen z varilnim modulom ET50.6. Letnik proizvodnje: 1988/04. Izdelano v Nemčiji. Cgedjhitxdopfx Agqow Na zalogi več strojev znamk Bihler in Bruderer.

Leto izdelave: 1988, stanje: rabljeno, Bihler B-4/2 Varilni krmilni sistem. Priključek: 400 V, 50 Hz. Csdpfx Ajhit E Dsgqsgw Opremljen z varilnim modulom ET50.6. Leto izdelave: 1988/04. Proizvedeno v Nemčiji. Na zalogi več Bihler in Bruderer strojev.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, višina zlaganja: 150 mm, dolžina obdelovanca (maks.): 364 mm, širina obdelovanca (maks.): 670 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Razstavni stroj z razširjeno konfiguracijo! TEHNIČNI PODATKI Format in papir Format pol: 210 x 210 mm do 364 x 670 mm Gramatura papirja (navaden papir): 81,4 do 350 g/m² Gramatura papirja (premazan papir): 105 do 350 g/m² Cgjdpfx Agsw Ifbhjqew Višina sklada podajalca: 150 mm Zmogljivost in kapaciteta Proizvodna hitrost: do 55 pol/min Število gubnih linij: do 20 OPREMA Pametni transporter SMSL-CV Rotacijska gubna enota SMSL-CR8

Stanje: rabljeno, Extraction system, central extraction unit, ambient air filtration system ETS Efficient Technical Solutions GmbH Central welding fume extraction Year of manufacture: approx. 2005 Airflow volume: approx. 5000 m³/h Extraction inlet at filter: 1200 x 150 mm Exhaust outlet at filter: 400 x 300 mm Cjdeicic Hjpfx Agqjgw Motor power: 10 kW Power supply: 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance hatch for filter replacement - Radial fan mounted on top of the unit Required space (L x W x H): 2000 x 1650 x 3650 mm Transport height without fan: 3100 mm Weight: approx. 2000 kg Very good condition

Stanje: rabljeno, Inverter welding machine for manual metal arc welding TECHNOLIT type PROFImat 170 Plus MMA welding machine, inverter welder, manual electrode inverter welder New – unused Serial no.: TB1703500316 Article no.: 440030 Year of manufacture: 2022 TIG (DC) Performance: 170 Amps, 45% duty cycle 150 Amps, 60% duty cycle 135 Amps, 100% duty cycle MMA Performance: 170 Amps, 35% duty cycle 145 Amps, 60% duty cycle 125 Amps, 100% duty cycle Adjustable range: 5–170 Amps, stepless Mains connection: 230 Volt, 50 Hz - Hot-start function (optimizes ignition behavior, simplifies starting with hard-to-strike electrodes) - Anti-stick function (optimizes electrode handling and prevents possible sticking of the electrode) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition Cgsdpfji E Iz Isx Agqjw - Suitable for stick electrode welding, for all electrode types up to Ø 4 mm - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Equipped with 230 Volt Schuko plug - S-mark for welding in environments with increased electrical hazard - Overvoltage protection Dimensions (unit without cables) L x W x H: 310 x 155 x 265 mm Weight (without cables): 7 kg NEW – unused from warehouse stock

Stanje: rabljeno, Inverter welding unit for manual metal arc welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding unit, stick electrode inverter Cgjdpfx Aovg Rh Tsgqjw Serial No. IEC 60974 Year of manufacture: 2020 Performance with mains supply 400 V (40% duty cycle): 280 amps Performance with mains supply 400 V (60% duty cycle): 200 amps Performance with mains supply 400 V (100% duty cycle): 170 amps Performance with mains supply 230 V (40% duty cycle): 200 amps Performance with mains supply 230 V (60% duty cycle): 180 amps Performance with mains supply 230 V (100% duty cycle): 150 amps Current range: 5-280 amps, stepless adjustment Power connection: 230 / 400 volts, 50 Hz - Operating voltage from 110 to 480 volts AC - Fully automatic adaptation to the supply voltage - Equipped with 16A CEE plug for 400V mains supply - Hot-Start function (optimized ignition for easier arc striking, especially with hard-to-strike electrodes) - Anti-Stick function (prevents electrode sticking and improves electrode handling) - Arc-Force function (optimizes arc stability and penetration) - Digital display - Socket for remote control connection - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Suitable for all types of stick electrodes up to Ø 5 mm - TIG-DC welding (TIG torch not included) - The unit may be connected to a flexible three-phase supply between 110 V and 480 V, or to a fixed three-phase 400V supply (50 - 60 Hz) plus earth conductor. This device may only be connected to a 4-wire, 3-phase power system with grounded neutral. Dimensions (unit without cables) L x W x H: 470 x 270 x 430 mm Weight (without cables): 23 kg New, unused

Stanje: rabljeno, E-welding unit, stick electrode welding machine ESAB type LTG 250 Machine no. 736-820-387 Year of manufacture: 1997 Output: 250 amps at 35% duty cycle Cgedpfx Aged N E Rvsqow 190 amps at 60% duty cycle 150 amps at 100% duty cycle Output adjustment: stepless - Electrode holder with 6 metre connection cable - Direct current - Fan cooling - Possible TIG welding capability, without torch package Mains connection: 380 volt, 50 Hz, 32 amp plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The machine was originally also designed for TIG welding. The TIG torch package is not included, and this function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is sold only as a stick electrode welder. A welding test with stick electrodes yielded very good results.

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0518018, Offer 24600 Technical Specifications: - Suitable for welding steel, aluminium, special metals, CrNi, etc. - Welding current: 450 A 60% duty cycle - 360 A 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control unit FRONIUS - FRONIUS water cooling unit - Separate wire feed case - Interconnecting cable set device – wire feed case 14 m - 4-roll wire feed, steplessly adjustable - MIG/MAG welding torch package, water-cooled, approx. 4 m - Earth cable Cgsdpfxjvncfmo Agqew - Pressure reducer - Mobile undercarriage - Power supply: 400 V / 6.6 A / 8.7 kVA - Space requirement: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0618012, Technical data: - Suitable for welding steel, aluminum, special metals, CrNi, etc. - Welding current: 450 A at 60% duty cycle - 360 A at 100% duty cycle Cgodpfjvncubox Agqsw - Welding current adjustable from 3 A to 450 A - Synergic control unit FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate cable set, device to wire feeder case: 1 m - 4-roller wire feed, steplessly adjustable - MIG/MAG torch, water-cooled, approx. 4 m - Ground cable - Pressure regulator - Mobile chassis - Connection requirements: 400 V / 6.6 A / 8.7 kVA - Footprint approx.: W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0618019, Offer 24589 Technical specifications: - Suitable for welding steel, aluminum, special metals, CrNi, etc. - Welding current: 450 A at 60% duty cycle - 360 A at 100% duty cycle - Adjustable welding current: 3 A – 450 A - FRONIUS synergic control system - FRONIUS water cooling unit - Separate wire feed unit - Intermediate hose package (machine – wire feed unit): approx. 14 m Cgsdsvnb Tpopfx Agqow - 4-roll continuously adjustable wire feed - MIG/MAG water-cooled torch package: approx. 4 m - Ground cable - Pressure regulator - Mobile undercarriage - Connection: 400 V / 6.6 A / 8.7 kVA - Space requirements: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: 0108.0272, Ref. No. 24189 Technical Specifications: - Welding current: 330 A at 40% duty cycle, 220 A at 100% duty cycle - Welding current adjustable in 4 coarse and 6 fine steps: 30 A / 15.5 V – 350 A / 24 V - 4-roll wire feeder, continuously adjustable: 1.2 – 18 m/min - 2-stroke and 4-stroke mode selection - Torch package: approx. 4 m in length Cgsdpfxstp Id Ue Agqsw - Ground cable - Pressure regulator - Connection: 400 V / 50 Hz - Space requirement: approx. W 500 x H 1000 x D 1000 mm - Weight: approx. 140 kg