Randek Ab Most Za Zabijanje Žebljev - Delovne Mize nakup rabljenega (98.874)

Stanje: rabljeno, Leto izdelave: 2010, Die Lösung wurde für die Produktion von vorgefertigten Außenwandpaneelen für Haushersteller entwickelt. Das System besteht aus drei Hauptkomponenten: einer schienengeführten Nagelbrücke und zwei Arbeitstischen. Nagelbrücke: Die Nagelbrücke ist für das automatisierte Nageln von Paneelen mit vier Nagelpistolen konzipiert, die jeweils mit der gegenüberliegenden Seite verbunden sind. Das System umfasst vier Nagelaggregate, die das Nageln gemäß vordefinierten Nagelbildern an den jeweiligen Arbeitstischen automatisch durchführen. Das Nagelportal ist auf einem am Betonboden befestigten Schienensystem installiert, das es erlaubt, das Brückensystem bedarfsgerecht zwischen beiden Arbeitstischen zu bewegen. Das System ist mit Lichtschranken für Positionierungs- und Sicherheitskontrolle ausgestattet. Funktion: • Der schienengeführte Rahmen wird in einer neutralen Ladeposition zwischen den beiden Arbeitstischen positioniert. • Der Nagelvorgang wird von einem der beiden Arbeitstische aus gestartet. • Das gewählte Nagelbild wird automatisch ausgeführt. • Das Nagelportal wird aktiviert und führt den Nagelvorgang entsprechend dem gewählten Muster aus. Dcodpfx Ajykqxdjdiek Arbeitstische: Die Arbeitstische sind mit Auflagennuten zur Positionierung der Holzständer ausgeführt. Diese Nuten sind über Schiebemechanismen verstellbar und ermöglichen so die Anpassung an unterschiedliche Paneeltypen und Konfigurationen. Funktion: • Die Außenkanten des Tisches werden per Handsteuerung an das Paneel herangeführt. • Die ausgewählten Latten werden manuell positioniert, um die genaue Platzierung des Paneels zu unterstützen. • Der Bediener positioniert die zu montierenden Bauteile in die entsprechenden Nuten und gegen die Latten. • Das brückengeführte Nagelsystem wird aktiviert und führt das Nageln gemäß dem gewählten Muster aus.

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Cette ligne de cloueuses à palettes DELTA a été fabriquée en 2008. Elle dispose d’un équipement complet comprenant un cloueur au sol, une cloueuse avec alimentation pneumatique et contrôle des clous, des unités de marquage, de retournement à 90° et 180°, une scie d’angle et une installation d’empilage, complétées par un convoyeur. Envisagez l’achat de cette ligne de cloueuses à palettes DELTA. Contactez-nous pour plus d’informations. Djdpfx Aoyaiyrsdijck Avantages de la machine Avantages techniques de la machine • Cloueur au sol / cloueuse à palettes : avec alimentation pneumatique pour traverses, gabarit pour la pose des planches supérieures, contrôle de l’alimentation des clous / unité de chargement pour le marquage des palettes / unité de rotation de palettes à 90° / scie d’angle pour palettes / unité de retournement de palettes à 180° / installation d’empilage de palettes / convoyeur pour palettes

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.000 mm, skupna višina: 1.900 mm, skupna dolžina: 9.000 mm, OY Foudila Ab is a company based in Kaskinen, Finland, with over 45 years of experience in wood handling. For the past 15 years, we have also been active in the pallet industry, developing numerous machines for nailing, automatic wood transport, and stacking over the years. We manufacture both standard machines and customized solutions tailored to customer requirements. Djdpfx Aey Izahodijck The LNM3500 is a flexible, compact, and efficient pneumatic nailing machine designed for the production of legs for pallet manufacturing. Its user-friendly software enables extremely fast changeovers and allows the storage of settings for more than 100 different leg types. The machine is equipped with three Bostitch nail guns with jumbo-coil magazines and status indicators. It can produce legs with 2 to 30 blocks per leg and comes with a large cassette for board feed. A protective cover ensures noise reduction and safe operation. The machine is operated via a 10-inch touchscreen and features a Beckhoff control system. The machine can be equipped with an optimized block cutter and an automatic block infeed system for the nailer. The block cutter can be mounted at the rear or on the side of the nailing machine. Standard machine specifications: - Boards: Length 600–3500 mm, width 60–125 mm, thickness 16–28 mm - Blocks: Length 60–150 mm, width 60–125 mm, height 50–100 mm Capacity: - 21 blocks/min Machine dimensions (without block cutter): - Length 9,000 mm, width 1,000 mm, height 1,900 mm The machine is CE certified. The leg nailing machine can also be outfitted with an automatic stacker for finished legs. Please do not hesitate to contact us for further information, images, or videos.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The Randek JS400C end-trimming saw is designed to create cut-outs at the ends of timber pieces, for example, to accommodate a tie beam in vertically oriented studs. The machine pneumatically clamps the timber and performs two cuts with its two 400 mm diameter saw blades. The maximum cutting length is 380 mm, and the cutting depth can be set up to a maximum of 115 mm. Operation is quick and easy via foot pedal. Function description The timber section to be notched, e.g. a stud, is pushed into the covered saw slot up to the set stop. Any protruding end is supported on a roller stand (not included). Pneumatic clamping and the sawing cycle are activated via foot pedal. Dsdpfx Aed Arwhjdisck Technical description • Notch depth: 30–115 mm • Notch length: 10–380 mm • Timber thickness: 30–70 mm • Electrical connection: 3 x 400 V, 50 Hz, 25 A • Compressed air: 0.5–0.8 MPa (5–8 bar) • Saw blades: Carbide-tipped, 400/30-3.5/2.5/40 Safety The saw is well guarded by a cover plate to prevent accidental contact. When the cover is opened, power is automatically cut off, significantly reducing the risk of injury. Advantages • Enables effective and precise notching/cutting • Flexible and easy to set up • Simple to operate • Adjustable working height and foot pedal operation ensure ergonomic working conditions for the operator

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Delovna miza s stiskalno napravo in napravo za postavljanje Dcodpex Tdtnsfx Adisk

Stanje: rabljeno, Leto izdelave: 2015, Wall line, izdelana za proizvodnjo sten za modularno proizvodnjo. Uporabljena pri švedskem proizvajalcu med letoma 2015 in 2021. OPOMBA: Prodaja se v obstoječem stanju. Dolžina postaje: 7000 mm Širina postaje: 2700 mm Postaja št. 1: Okvirna postaja CAD/CAM (vključuje dve pribijalni orodji) Postaja št. 2: Delovna miza Postaja št. 3: Polavtomatski pribijalni most (vključuje dve pribijalni orodji) Postaja št. 4: Delovna miza - dvižna miza Dcodpjxv Arxofx Adijk Postaja št. 5: Multifunkcijski portal CAD/CAM (vključuje štiri vijačna orodja in rezkalno enoto) Postaja št. 6: Delovna postaja - sprejemna miza - premakljiva bočno Postaja št. 7: Delovna postaja - prenos pod kotom Postaja št. 8: Delovna postaja - dvižna miza Postaja št. 9: Delovna postaja - prenos pod kotom Postaja št. 10: Delovna postaja - dvižna miza

Stanje: novo, Leto izdelave: 2027, ZEROLABOR ROBOTIC SYSTEM for Timber Frame Construction The Randek ZEROLABOR robotic system is a production cell in which various work processes are performed fully automatically by robots. The system is flexible and can be configured to customer specifications. The robotic cell can be integrated into existing production lines or operate as a standalone unit. The system enables the nearly fully automated production of walls, floors, and roofs in timber frame construction. Automated Processes: - Panel handling: Panels are removed from different stacks using vacuum lifters and placed onto the timber frame construction according to the CAD file. The system is flexible and can handle various panel sizes. - Fastening of panels using screws, staples, and/or nails. - Creation of recesses for electrical installations, windows, etc. - The system can process 1, 2, or 3 panel types. Dodpfx Adoduub Uoieck - Component marking with inkjet. - Gluing. - Waste handling: plasterboard waste and OSB waste are, for example, placed at defined locations or, if necessary, directly into the waste container. - Effective dust extraction. - Alignment of the component with the worktable. - Positioning of studs prior to nailing; precise placement of nails/staples into the studs.

Stanje: novo, Randek SPL728 Cut-Off Saw Computer-controlled, rotating, with LAN (Ethernet) connection for downloading or storing saw jobs (text file in ASCII format). The number of programs that can be stored is limited only by the size of the hard drive. Thanks to the graphical touchscreen (HMI), the operator can monitor all details directly on the screen or enter saw jobs manually. This minimizes disruptions in production flow. Saw blade: - Carbide-tipped, low-noise - 700 mm diameter / 116 teeth - 360° horizontal swivel - 90° to 28° tilting - 250 mm plunge depth Motor power: 7.5 kW. Automatically closing and locking safety guard made of plastic. Infeed table, available in lengths of 4.0 / 5.8 / 8.2 / 10.6 m Powered infeed roller, type IRO4-120. Transport rollers: 76 mm diameter, 400 mm roller length, 500 mm center-to-center spacing. Rear fence: 120 mm. 2 pneumatic hold-down devices. Feed direction: optional from left or right. Outfeed table, available in lengths of 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m Computer-controlled roller conveyor type LX. Dcodpfxofg Tatj Adiek Guide roller for outfeed: rollers 76 mm diameter, 400 mm long. Rear stop 120 mm. 2 computer-controlled longitudinal stops, belt-driven. Stop 1 - designed for cut lengths down to 50 mm. Stop 2 - traverses the full length of the outfeed table. Positioning of longitudinal stops and adjustment of cutting angles are computer-controlled independently. Maximum travel speed of longitudinal stops: 1 m/s. Wood infeed: 1 unit Return devices: 2 units Feed direction: configurable from left or right.

Stanje: novo, Leto izdelave: 2026, Tilting Table Combination for Timber Frame Construction – BS20 The Randek Tilting Table Combination is an efficient tool for the production of prefabricated walls, roofs, floors, and gable structures with timber or metal frames. The tables can be operated as standalone units or integrated into production lines. Perfectly square building components of high quality are ensured by the clamping function. The lifting and tilting of the components are performed through a controlled, manually operated process. This tilting table combination is designed specifically for the manufacture of prefabricated houses, enabling high productivity. The adjustable assembly height for building elements ranges from 2.25 m to 3.10 m. The following table lengths are available: 6.0 m / 7.5 m / 9.0 m / 12.0 m. Wall thickness can vary between 80 and 250 mm. Functions: The tilting table combination was developed to efficiently perform the following processes: frame assembly, insertion of insulation material, stapling of plastic or paper films, and application and nailing of wall cladding. • Production of square building components. The pneumatic clamping mechanism along the long side of the master table presses the frame assembly into a square, high-quality, precise building component • Automatic tilting of the building component, manually controlled • Automatic raising of the building component Dedpo Nn Hyefx Adisck Technical Description: • Lengths available: 6.0 m / 7.5 m / 9.0 m / 12.0 m • Adjustable width between 2250 – 3100 mm; width is set manually and easily • The master table can be hydraulically raised up to 92°, the slave table up to 86° • Pneumatically activated pressing function on the long side of the master table • Stops 160 mm high • Both tables are, as far as technically feasible, covered with plywood. The plywood sheathing allows sub-components and beams to be placed directly on the table • Tabletops supported by a robust steel frame • Optimal working height of 620 mm • Longitudinal C-profiles for positioning stops for studs • Tables are delivered ready for assembly. Installation is straightforward Safety: • Emergency stop switch on control panel • CE conformity Advantages: • Perfectly square building elements through the pressing function • Controlled automatic raising and tilting of the components • Ideal working height • Flexible width adjustment

Stanje: potreben popravila (rabljeno), Table size: 2900 x 1200 mm Folded size (without legs): 420 mm Opened size (without legs): 1700 mm without hydraulic unit! Quantity: 1 piece Dsdpfx Aeik Hbzodieck Price/piece

Stanje: dober (rabljeno), Delovna miza, montažna miza, podnožje -Podnožje: delovna miza s cevasto okvirno konstrukcijo in ploščami za pritrditev kolesc -Širina: 1200 mm -Globina: 800 mm -Višina: 720 mm Dodpfozru Tmex Adieck -Število: 1 delovna miza -Teža: 29 kg

Stanje: rabljeno, Univerzalni adapter za pritrditev pod kotom / adapterji Naprodaj je rabljen komplet dodatne opreme za elektrodinamični tresalnik oziroma vibracijski preskusni sistem. Komplet vsebuje različne masivne aluminijaste adapterje za pritrditev pod kotom, adapterje, naprave za pritrditev, objemke in drugo dodatno opremo. Komponente so idealne za individualno pritrditev preskusnih vzorcev, posebne konstrukcije ter uporabo na vibracijskih preskusnih sistemih in napravah za preskušanje vibracij. Tehnični podatki: Proizvajalec: neznan Tip: Komplet dodatne opreme za elektrodinamični tresalnik / vibracijski preskusni sistem Material: večinoma aluminij Izvedba: adapterji za pritrditev pod kotom, adapterji, naprave za pritrditev in pritrdilni elementi Oprema: Več masivnih adapterjev za pritrditev pod kotom Adapterji različnih velikosti Naprave za pritrditev in objemke Objemke in adapterji Pritrdilni material in druga dodatna oprema, kot je prikazano na slikah Masivne aluminijaste konstrukcije Navojne in vodilne luknje Univerzalna uporaba Področja uporabe: Elektrodinamični tresalniki Vibracijski preskusni sistemi Preskušanje vibracij Preskušanje materialov Simulacija okoljskih pogojev Raziskave in razvoj Avtomobilska industrija Pritrditev preskusnih vzorcev in posebne konstrukcije Obseg dobave: Popoln komplet dodatne opreme, kot je prikazano na slikah Adapterji za pritrditev pod kotom Adapterji Naprave za pritrditev Objemke Pritrdilni material Drugo dodatno opremo, kot je prikazano na slikah Stanje: Rabljen. Vizualno stanje, kot je prikazano na slikah. Navadne sledi uporabe zaradi starosti, praske in vdolbine. Transport: Prodaja se samo dodatna oprema, prikazana na slikah. Miza, prikazana na slikah, ali drugi predmeti, ki niso izrecno omenjeni, niso del prodaje. Možna dostava na paleti ali osebni prevzem. Dedpszpx Ucofx Adieck Pridržujemo si pravico do sprememb, napak in predčasne prodaje. Za dodatna vprašanja smo vam z veseljem na voljo po telefonu.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.500 kg, skupna dolžina: 6.000 mm, skupna širina: 1.800 mm, skupna višina: 2.250 mm, obratovalni tlak: 8 letvica, vhodni tok: 8 A, trajanje garancije: 24 meseci, Stanje: Novo Montaža in servis: Po vsej Evropi Usposabljanje: Vključeno usposabljanje operaterjev Garancija: Garancija proizvajalca Največje dimenzije palete: 2x 140 cm x 140 cm Način delovanja: 2-mizni sistem (desna in leva miza) Dcjdsxlxrmopfx Adiok Vsestranskost: Ustreza vsakemu tipu palet in podkonstrukcij Kapaciteta shranjevanja: Shranjevanje do 900 različnih tipov palet Upravljanje: Enostavno in intuitivno upravljanje Krmiljenje (jeziki): Angleščina, nemščina, poljščina, francoščina, italijanščina, španščina Avtomatizacija: Samodejno generiranje delovnih poti Možnosti: Dimenzije stroja je mogoče prilagoditi po meri (na voljo do 13 m dolžine)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.800 mm, skupna višina: 2.250 mm, skupna dolžina: 8.000 mm, skupna masa: 1.500 kg, Stanje: Novo Montaža in servis: po vsej Evropi Dcjdpfx Adophmwbjisk Usposabljanje: vključuje usposabljanje operaterja Garancija: proizvajalčeva garancija Največje mere palete: 2x 140 cm x 140 cm Način delovanja: sistem z dvema mizama (desna in leva miza) Vsestranost: pribija vse vrste palet in podkonstrukcij Pomnilniška kapaciteta: kapaciteta za 900 različnih tipov palet Upravljanje: enostavno in intuitivno rokovanje Krmiljenje (jeziki): angleščina, nemščina, poljščina, francoščina, italijanščina, španščina Avtomatizacija: samodejno generiranje poti gibanja Možnosti: mere stroja individualno nastavljive (na voljo do 13 metrov dolžine)

Stanje: zelo dobro (rabljeno), 1 valjasta miza dolžine 3,0 m x širine 0,77 m s 7 nosilnimi valji, s pnevmatsko verigo za dvig in izravnavo s polžastim zobnikom ter mehanskim zračnim cilindrom, z leseno prehodno valjasto drsno mizo z gumijastim vrtljivim krožnikom za enostavno nalaganje lesa z eno osebo, z dvema preklopnima omejevalnima valjema za deske iz tračne žage, ki so že enostransko obrezane. 1 valjasta miza dolžine 3,5 m x širine 0,77 m z 8 nosilnimi valji, z ali brez prehodne valjaste drsne mize. Originalne PAUL valjaste mize v različnih širinah in dolžinah, v standardni ali težki izvedbi, primerne za uporabo pred krožnimi žagami za kapiranje, obrezovanje ali ponovno žaganje. Kratke delovne mize omogočajo npr. vstop za prevzem materiala s prečnega transporterja, prehod skozi postavitev miz ali nalaganje težkih tramov ali modelov z viličarjem, na voljo pa so tudi dolge delovne mize v različnih dimenzijah. Dcjdpfst E Nw Tox Adiok

Stanje: rabljeno, Formwork nail, formwork nails, concrete nails, head pins - Manufacturer: Würth, collated formwork nails, box of 100 pcs - Type: SMA 106/10, 54 mm long Dcodpsiqu R Sjfx Adiek - Quantity: 61 boxes available - Price: per box - Box dimensions: 120/100/H55 mm - Weight: 0.5 kg/box

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 6.000 kW (8.157,72 KM), skupna masa: 3.700 kg, dolžina mize: 3.000 mm, širina mize: 1.500 mm, Oprema: CE označba, dokumentacija / priročnik, It's time to boost your production efficiency by 1.5 times! The Wattsan 1530 Tablechange laser cutter can process materials up to 15 mm thick, including stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. This CNC laser cutter for metal features two interchangeable worktables, each measuring 1500x3000 mm, allowing seamless switching between them. The precision loading rollers of the Wattsan 1530 facilitate smooth material handling. Overall, manufacturing efficiency is increased, as there is no longer any time wasted on loading and unloading parts. For more details, feel free to contact our managers! Dsdpoiicv Sjfx Adijck Features of the Wattsan 1530 Tablechange: - Working area: 1500x3000 mm - Laser power: up to 6000 W - Weight: 3600 kg Virmer not only provides first-class machines but also offers service and delivery. Our engineers and managers are ready to answer all your questions and, if required, provide video support. Additionally, Wattsan machine owners benefit from lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official distributor of Wattsan. We supply not just laser engravers, but also metal cutters, welding equipment, markers, and cleaning machines. Wattsan is a Chinese manufacturer that has been building laser equipment for nearly 15 years and continuously improves with input from its customers. Thanks to user feedback, Wattsan has implemented over 50 upgrades, making its machines more reliable, accurate, and powerful, allowing you to take your business to the next level. YOU CAN WRITE OR CALL US! WE WILL CHOOSE THE RIGHT MACHINE FOR YOUR REQUIREMENTS. If you are looking for the right laser or CNC milling machine, we are happy to assist you. You will find a wide selection of laser machines and accessories with us: CO2 laser machines; metal laser cutters; laser metal cutters; fiber metal lasers; fiber metal laser engravers; CNC metal milling machines; wood milling machines; CNC milling machines; laser engraving machines; laser engravers; plywood laser cutter; laser engraver; metal laser cutting machines; CNC milling machines; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG lasers, MAX Photonics, Raycus; compressors; rotary devices; mirrors for laser machines.

Leto izdelave: 2010, stanje: dober (rabljeno), 2 pcs ALU tables for measuring machine Manufacturer: MEUSBURGER Type: BST 5500 Year: 2010 Dcedpfxeg Uf Ngs Adisk Dimensions: Length 5500 mm, Width 1200 mm, Height 700 mm In good condition.

Stanje: novo, Leto izdelave: 2024, ALZMETALL Column Drilling Machine AB 34 iTRONIC, Drilling capacity in steel: 34mm, Spindle speeds: 100-1800 rpm, short spindle MK4, spindle stroke: 160mm, throat depth: 300mm, column diameter: 145mm, machine table usable area: 615x430mm, with T-slots 2 x 14mm x 224mm, spindle-to-table distance min. / max. 138/688mm, machine table height adjustment via hand crank, feeds: 0.1-0.2-0.3-0.4 mm/rev, machine height without options: 1865mm, net weight: 470 kg. Standard equipment: - 7” TFT – LCD display with touch function - Tapping device - Infinitely variable speed adjustment - Spindle guard - Three separate push-buttons for right-hand – left-hand rotation – stop - Emergency stop mushroom button - Main switch - Right and left-hand rotation - Control voltage 24 Volt - Protection class IP 54 - Motor insulation class “F” (155°) - Electromagnetic feed overload protection - Initial machine oil filling Dcedpjiqyixsfx Adiok Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Including the following options: - LED machine light Pos. 12 - Coolant system A Pos. 24 - Foot switch for tapping Pos. 20.5 Delivery time: ex stock Waiblingen Beinstein The machine can gladly be inspected at our premises by appointment.

Stanje: novo, Jekleni okvir – Avtomatski zabijalni most Popolnoma avtomatska postaja za zabijanje žebljev ali spenjanje ploščastih materialov v skladu s projektnimi specifikacijami, ki vključuje naslednje funkcije: 1. Zabijanje žebljev ali spenjanje pločevine 2. Ulivanje odprtin ali previsov z rezkanjem 3. Nanosa paroprepustne membrane 4. Zabijanje žebljev ali spenjanje letvic Specifikacija - Popoln PC nadzor z 17'' zaslonom na dotik - Interaktivni prikaz izvajanja delovnih postopkov - Samodejen uvoz podatkov iz risarske programske opreme - Nosilne mize težke izvedbe z eno fiksno in eno pomično stranico - Kotne blokade za pravokotno postavitev elementov s pnevmatskim pomikom za omogočanje prehoda panela na naslednjo pozicijo - Najmanjša višina panela: 1300 mm - Največja višina panela do 3,5 m (opcijsko razširljivo) - Največja dolžina panela: 6 m – opcijsko do 13 m - Težke delovne mize širine 400 mm, delovna višina 825 mm - Maksimalna debelina panela 300 mm (opcijsko do 500 mm) - Motorizirano odpiranje mize z avtomatsko zavoro Most je opremljen z enim nosilcem za zabijalno/spenjalno orodje kot standard. (Opcija za 2 ali 3 nosilca orodij). Popolna integracija z vodilnimi programskimi paketi, kot so: Sema, Dietrich’s, HsbSoft, CADWORKS, Gang Nail in Mitek. Sistem za nanašanje letvic z vodili za ravno postavitev in skladiščnim prostorom za letve. Pnevmatski dvižni valji za pomoč pri ročnem premikanju končnega panela v naslednji položaj. Opcijski električno gnani sistem podajanja plošč, vključno z avtomatskim dovajanjem in nastavljanjem višine podporne mize. Opcijski rezkalni agregat z 4kW motorjem – servo pogon. Dodatna oprema - Miza z vodili za most - Doplačilo na meter za mizo z vodili - Neodvisna vodila za 8 m premik preko ene 6 m kapacitete mize (skupaj 16 m vodil), doplačilo na meter vodila - Delovna miza za držanje panela 6 m (brez vodil), doplačilo na meter - Motorizirane verige namesto ročnih valjev – začetni strošek, cena na meter motorizacije Dsdpsdzc Rxefx Adijck - Sistem vodenja za pozicioniranje letvic - Dodatni nosilci za orodje - Spona in držalo za papir ter programska oprema - Električno rezanje papirja - Debelina panela do 500 mm - Krožna žaga z X, Y, Z & C osmi za debeline panela do 350 mm in 500 mm - Fiksna nastavitev naklona krožne žage - Rezkalnik s frekvenčnim pretvornikom, nameščen na mostu za izrezovanje odprtin v panelih - Vključuje programski nadzor in odsesavanje prahu.

Stanje: pripravljen za uporabo (rabljen), * Model: valji za valjčne mize * Na zalogi: 2 tipa/velikosti. * 1x Tip: SW 8 * Valji z dimenzijo: 250 mm x 40 mm * Cena: 2,50 € za kos. * Zaloga: 5000 kosov. * 1x Tip: SW 8 * Valji z dimenzijo: 315 mm x 63,5 mm Dsdoywmqdepfx Adisck * Cena: 3,50 € za kos. * Zaloga: 5000 kosov.

Stanje: novo, Further technical data available on request 3D welding table systems Dsdpfxjd Aca Dj Adijck Worktop design: top plate For more information, see catalogue/price list

Stanje: dober (rabljeno), Frame width: 1,170 mm / Height: 900 mm / Frame depth: 900 mm The scope of delivery includes: 02x Workbench uprights, used Material color: blue Frame profile: 85 mm Upright height: 900 mm Upright depth: 900 mm Including cross and diagonal braces, base plates The uprights are pre-assembled (bolted truss construction) 04x Workbench beams, used Material color: yellow Box profile: 80 x 50 mm Dcedpfx Ajmrr Arediek Clear span: 1,000 mm 08x Locking pins, used Finish: fully galvanized

Stanje: dober (rabljeno), Technical specifications for the workbench frame: Manufacturer: Jung Heinrich Type: T Scope of delivery includes: 02x Workbench uprights, used Material color: blue Upright height: approx. 910 mm Upright depth: approx. 1,050 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled (welded truss construction) 04x Workbench beams, used Material color: orange Box profile: 120 x 50 mm Beam type: HN 120|20 Clear span: 2,700 mm 08x Locking pins, used Finish: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting The images are for illustrative purposes only. Material color may differ slightly. The workbench frames are picked for shipment in a disassembled state; The workbench uprights are pre-assembled; Production time is generally approx. 3 - 5 working days. Dedpjrdy Ivefx Adiock Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any further transport or shipping of this item will incur additional costs, which can be provided upon request depending on place of delivery and scope of order.

Stanje: dober (rabljeno), Frame width: 1,170 mm / Height: 900 mm / Frame depth: 800 mm Scope of delivery includes: 02x workbench supports, used Color: blue Frame profile: 85 mm Support height: 900 mm Support depth: 800 mm Including cross and diagonal braces, base plates The supports are pre-assembled (bolted truss construction) Dcsdpsmrr Agsfx Adiek 04x workbench beams, used Color: yellow Box section: 80 x 50 mm Clear span: 1,000 mm 08x locking pins, used Version: fully galvanized