Pullmax Stroj Za Rezkanje Robov nakup rabljenega (100.280)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA Ledpfx Asr A Eq Rolcohl The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: rabljeno, Leto izdelave: 2010, delovna širina: 230 mm, premer vretena: 40 mm, delovna višina: 120 mm, model krmilnika: Siemens Simatic Touch-Panel, delovna dolžina: 8.483 mm, TEHNIČNE PODROBNOSTI Najmanjša delovna višina: 6 mm Največja delovna višina: 120 mm Najmanjša delovna dolžina: 370 mm Največja delovna dolžina: 8.483 mm Najmanjša delovna širina: 25 mm Največja delovna širina: 230 mm Največja hitrost podajanja: 12 m/min Število gumijastih podajnih valjev: 1 Število podajnih valjev z zobmi: 4 Skupno število podajnih valjev: 5 Število obdelovalnih enot: 4 Spodnji vreteno Premer vretena: 40 mm Dolžina vretena: 240 mm Moč motorja: 4 kW Desni vreteno Premer vretena: 40 mm Dolžina vretena: 240 mm Največji premer orodja: 4 mm Moč motorja: 4 kW Levi vreteno Premer vretena: 40 mm Dolžina vretena: 240 mm Moč motorja: 4 kW Zgornji vreteno Premer vretena: 40 mm Dolžina vretena: 240 mm Moč motorja: 5,5 kW PODROBNOSTI O STROJU Sistem upravljanja: Siemens Simatic, zaslonska plošča Skupna priključna moč: 24 kW OPREMA Izvedba v skladu s standardi CE Stroj se prodaja in dobavlja v njegovem dejanskem in pravnem stanju („kot je in kjer je“), na podlagi fotodokumentacije in tehnične/komercialne dokumentacije, ki ima opisni značaj. Kupec ima pravico pregledati blago pred prevzemom in prevzema odgovornost za namestitev, zavarovanje in uporabo stroja na končni lokaciji. Zunanja referenca: 7243 Lhsdpfx Aloz Ekkxscol

Stanje: zelo dobro (rabljeno), SCM Praktika in excellent condition Lhodpfxjt Hkq Rj Alcol

Stanje: skoraj kot novo (rabljeno), Edge milling machine for deburring/chamfering various internal and external contours. Chamfer size adjustable up to max. 10 mm at 45°. 45° cutter / 8 cutting edges, double row – KIF/MF. Suitable for steel, light metals, stainless steel, cast iron, and non-ferrous metals. Includes 21 packs of 10 indexable inserts X11.30.35.45 P25 BS TiCN each Includes 7 packs of 10 clamping screws for X11.30.35.45 Available at extra cost: 1 milling head 30° 1 milling head 35° 1 milling head 45° 1 milling head 60° Lhedpetwcn Rofx Alcsl Ex works, plus VAT.

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter – max. 400 mm Number of teeth – max. 150 Module – max. 5 Total power requirement: 16 kW Machine weight approx. 10 t PRÄWEMA CNC Gear Edge Milling Machine using Continuous Hobbing Process For chamfering external and internal gears on sliding sleeves, synchronizer rings, clutch hubs, starter pinions, spur gears, etc. Type SynchroForm W 2 - 1 Year of manufacture: 1991 Machine no. 05610 Workpiece diameter min./max.: 30 – 400 mm Number of teeth: 6 – 150 Lhsdpfjt Hwylsx Alcjl Maximum module: 5 Tool holder / shank Ø: SK 30 / 20 mm Tool speed / spindle power max. continuous: 4,000 rpm or 1.8 kW Feed rates transverse & longitudinal: 0.001–12 m/min Max. workpiece rotation speed (1.5 kW) - C axis: 2,000 rpm Total drive: approx. 16 kW – 380 V – 50 Hz Weight: approx. 10,000 kg Accessories / Special Equipment: • BWO (HECKLER & KOCH) CNC control Type 785 H for up to 7 axes with screen input and all necessary monitoring and fault diagnosis systems for fully automatic operation • Two milling spindle units (left and right), adjustable in all necessary angular positions, CNC-controlled: Z and W axes = tool cross slide / X and U axes = tool longitudinal slide, L and O axis = milling spindle, C axis = workpiece spindle rotation. Manually controlled: Tool slide rotary table (B and E axis), tool slide vertical adjustment (V and Y axis), tool head tilt (A and D axis), each with ROD for digital position indication in the control. • Hydraulically actuated workpiece clamping device in conjunction with loading automation via workpiece feeder/conveyor belt and swing loader, as well as air system monitoring for the workpiece. • Coolant unit with chip conveyor, soundproof enclosure, central lubrication, built-in hydraulic system, pneumatically operated safety doors, deburring device, etc. The machine operates on the hobbing principle with electronically synchronized tool and workpiece axes for machining both symmetrical and asymmetrical straight chamfer shapes. Characterized by high productivity and precision. Condition: good to very good – soon ready for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further machines for processing transmission components are always in stock. Please inquire about your requirements with us.

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter - max. 0 mm Number of teeth - max. 0 Module - max. Module - min. Total power requirement kW Machine weight approx. t Space requirement approx. m Ljdpfxjt Hwv Hj Alcshl CNC-controlled synchronizer ring milling machine ideal for synchronizer rings, BWO control 785 H

Leto izdelave: 1975, stanje: rabljeno, Wheel Diameter – max. 280 mm Number of Teeth – max. 100 Module – max. 6 Module – min. 1 Total Power Requirement: 6 kW Machine Weight: approx. 2,500 kg Space Requirement: approx. __ m H U R T H Automatic Gear Edge Milling Machine for universal use in deburring and chamfering gears Model: ZK 7 - Year of Manufacture: 1975 Serial No.: 26 000 _____ Lhedot Hw Dkopfx Alcel Max. Workpiece Diameter: approx. 280 mm Workpiece Length: approx. 200 mm Module Range for Deburring: 1-6 module for Simplified Shifting: 1-4 module Workpiece Tooth Count: 6 - 100 Workpiece Spindle Bore: 102 mm Horizontal Adjustment of Workpiece Head: approx. 340 mm Vertical Adjustment of Milling Slide: 180 mm Swiveling Range of Milling Slide: 105° Traverse Adjustment of Milling Slide: approx. 300 mm Cutter Speeds: 250-2,800 rpm Cutter Stroke Rates: 30–210/min Adjustable Cutter Stroke: 6–12 mm Milling Spindle Taper: 40 SK Total Drive: approx. 6 kW – 380 V – 50 Hz * Weight: approx. 2,500 kg Accessories / Special Equipment: • Electric workpiece clamping device with collet chuck setup, facility for expanding mandrels, and standard workpiece holder, extensive clamping devices included. Foot switch for clamp release. • Mechanical indexing device for tooth numbers, with approx. 20 different indexing plates • Adjustable tooth gap-centering device mounted on the workpiece head • Mechanical collet adapter installed on the tool head for various cutter diameters and types (profile/face/bell cutters, etc.), approx. 50 various used and new cutters included. • Hydraulic working stroke of tool spindle towards the workpiece, with integrated hydraulic unit. • Workpiece counter Condition: Good – demonstration-ready, very interesting due to extensive accessories. Delivery: ex stock – as inspected * Payment: strictly net – upon receipt of invoice We look forward to your order. Approximately 100 different gear cutting machines are still available in stock for selection. Please inquire with us.

Leto izdelave: 2005, stanje: dober (rabljeno), številka stroja/vozila: 412060, Offer 23001 Technical Specifications: - Chamfer width: 1 – 15 mm - Cutter head with indexable inserts - Chamfer angles: 30° – 37.5° – 45° – 60° Lsdpfei Ab Unox Alcohl - Drive: 220 V / 1100 Watts - Required space approx.: W 450 x D 300 x H 350 mm - Weight approx.: 20 kg - Transport case

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: 0-260-06-0228, Foot control 1200 x 800 mm Extraction nozzle 80 mm Lhjdsigadlopfx Alcsl Pneumatic connection Cable + 16 A plug 1 set of operating tools 1 set of measuring rollers

Stanje: rabljeno, Technical details: electric version - voltage/frequency: 380 V/Hz Total power requirement: 1.1 kW Machine weight approx.: 18 kg Dimensions L x W x H: 0.32 x 0.50 x 0.25 m EDGE CHAMFERING MACHINE, benchtop unit Application: chamfering, deburring Equipped with milling head Ø 65 mm with carbide inserts Motor speed 2,780 rpm Lhjdpfou Nggnox Alcsl Workpiece holding via 45° prism, with 2 supports (L x W: 500 x 40 mm), rotatable 15° - 45° Maximum chamfer width: 5.0 mm, angle 15° - 45°

Leto izdelave: 2003, stanje: rabljeno, Tehnični podatki: Teža stroja pribl.: 8,5 t Wera VA 240-R stroj za rezkanje robov zobnikov Uporaba: izdelava sinhronega zobčenja, posnemanje robov sinhronega zobčenja in odstranjevanje srha Vložni in izložni trak Lhsdszbbx Aepfx Alcol Letnik proizvodnje: 2003 Krmiljenje 840 D PL Mere vključno z vložnim in izložnim trakom: 4,8m x 2,4m x 2,4m

Stanje: dober (rabljeno), Leto izdelave: 2000, Stroj za rezkanje robov, naprava za rezkanje robov, posnemalec robov, mobilni rezkalni stroj, oblikovalec varilnih robov, naprava za pripravo varilnih robov, stroj za oblikovanje varilnih robov, naprava za odstranjevanje ostružkov, stroj za odstranjevanje ostružkov -Stroj za rezkanje robov: z nastavljivo hitrostjo vrtenja -Nastavitev globine: 0 - 7 mm -Pogon: 0,75 kW -Nastavljivo število obratov: 0 - 6000 obr/min -Kot: 45° -Pribor: glava za rezkanje Widia Lhodpfx Ajy Rt Aaelcel -Dimenzije: 650/560/H1190 mm -Teža: 94 kg

Stanje: rabljeno, Technical details: Lhedeu Ngdtjpfx Alcjl Height above floor: 930 mm Machine weight approx.: 75 kg (+ 27 kg base frame) Dimensions (L x W x H): 0.6 x 0.48 x 0.43 m EDGE BEVELING MACHINE Application: For beveling Machine table (W x D): 600 x 240 mm with guide rail (L x H): 400 x 25 mm Installed tool: Cutter approx. 50 mm with 45° milling profile Bevel width: approx. 6 mm Voltage: 380 V with ON/OFF switch

Stanje: rabljeno, Technical Details: Voltage: 380 V Total power requirement: 4.0 kW Approx. machine weight: 1,270 kg Dimensions (L x W x H): 1.4 x 1.0 x 1.9 m Ljdju Ngfdopfx Alcjhl Application: Beveling of discs and flat material - Smallest straight edge = 3 mm - Max. material tensile strength = 70 kp/mm (690 N/mm²) - Max. feed speed: at 10 mm bevel width = 3.1 m/min at 15 mm bevel width = 2.9 m/min at 20 mm bevel width = 2.7 m/min at 25 mm bevel width = 1.5 m/min With bevel angle adjustment (bevel angle) 25° - 55° Scale for adjusting the straight edge Manual pressure hold-down with handwheel Cutting wheel size Ø 200 mm; gearing: fine / medium / coarse Support stand size: D: 220 x W: 620 x H: 350 mm; driving roller approx. Ø 350 x 100 mm; display via linear scale

Stanje: dober (rabljeno), Leto izdelave: 2003, I am selling a HEBROCK HFF08 edge radius milling machine for moulded parts, year of manufacture 2003. Suitable for curved elements. Good condition, can be inspected! It is also possible to purchase the edge banding machine AKV 088D. Ledpfx Alswun H Uscohl

Stanje: novo, Aceti Edge Milling Machine Art.61 A stable, robust edge milling machine for machining visible and welding edges. Bevel size adjustment via handwheel and scale. Table is hardened, with 500 mm clamping length. Axial adjustment of the milling table for full utilization of the ISO/DIN indexable inserts. Suitable for all materials, including plastics, by using different indexable inserts. Standard equipment: - Milling head fully equipped with 10 ISO indexable inserts - Hardened, axially adjustable guides - Bevel adjustment via handwheel with locking mechanism Ledpfeiwxwtox Alcohl - Angle adjustment via circular guide 15-45° - Table design with 4 rubber feet Technical data: Motor: 400V 1.1 kW Speed: 2800 rpm Milling table: 500 x 100 mm Cutter: 80 mm Bevel: 0 – 6 mm Angle: 15 – 45° Weight: 35 kg Incl. 10 pcs. SPUN 1203 indexable inserts

Stanje: rabljeno, Double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor, spindle motor Lsdpfxopyk Nbs Alcjhl - Manufacturer: Perske, milling motor type KN 71.14/2 with mounting bracket - Power: 3 kW 2880 rpm - Voltage: 380 V / 50 Hz - Shaft mount: Ø 30 x 70 mm - Tool: max. Ø 440 mm - Dimensions: 700/570/H480 mm - Weight: 100 kg

Stanje: rabljeno, Double-end profiler, edge processing machine, scoring motor, machining motor, milling motor, spindle motor - Power: 0.4 kW, 12,000 rpm at 200 Hz - Voltage: 133 volts - Mounting shaft: Ø 20 mm - Tool: Ø 70 x 20 mm Lhsdpfjb A Tctex Alcsl - with indexable insert milling cutter - Quantity: 1 unit available - Dimensions: 285/60/H170 mm - Weight: 5 kg

Stanje: dober (rabljeno), Double-end profiler, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor - Manufacturer: Haffner, Milling motor type M 30 - Power: 300 W 17,000 rpm - Voltage: 200 V 300 Hz - Dimensions: 240/70/90 mm Lhedpfeku Hrrox Alcsl - Weight: 2.5 kg

Stanje: rabljeno, Double-end profiler, edge processing machine, scoring motor, cutting motor, spindle motor, milling motor, electric motor Lhedsrp Ikvopfx Alcel - Power: 1.5 kW, 12,000 rpm at 200 Hz - Shaft mount: Ø 16 mm - Dimensions: 380/75/H160 mm - Weight: 8 kg

Stanje: rabljeno, Double-end profiler, edge processing machine, scoring motor, cutting motor, spindle motor, milling motor -Manufacturer: Peske, milling motor type VS 31.09-4 -Power: 0.37 kW, 8540 rpm at 300 Hz -Voltage: 165 volts -Mount: Collet chuck -Tool: Ø 8 mm -Quantity: 2 motors available -Price: per unit Lhodpfxeb A Tcwo Alcsl -Dimensions: 260/60/H140 mm / 255/60/H155 mm -Weight: 3.5 kg each

Stanje: rabljeno, Double-end tenoner, edge processing machine, scoring motor, cutting motor, milling motor, spindle motor - Manufacturer: Perske, milling motor type DVMS 903/2 - Power: 0.4 kW, 12,000 rpm at 200 Hz - Voltage: 133 volts - Shaft interface: Ø 30 x 32 mm - Tool: Ø 70 x 20 mm / indexable insert milling cutter - Quantity: 1 unit available - Dimensions: 250/59/H140 mm - Weight: 3.8 kg Lhsdpfxsmdygie Alcjl

Stanje: rabljeno, Double-end profiler, edge processing machine, scribing motor, cutting motor, spindle motor, milling motor - Manufacturer: Perske, milling motor for edge processing machines Ljdpfsl Dvuajx Alcohl - Power: 0.15 kW, 11,160 rpm at 200 Hz - Voltage: 133 Volt - Shaft: Ø 15 x 17 mm / M12 - Dimensions: 190/70/H85 mm - Weight: 1.8 kg

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: AH005553, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 8.100 mm, skupna masa: 4.000 kg, Main specifications: * Panel thickness: max 60 mm * Edge thickness: 0.4 - 3 mm (Solid wood up to [12] mm) * Feed speed: up to 25 m/min * Glue system: [EVA / PUR] Configuration: * Pre-milling unit * Gluing unit with pressure rollers * End-trimming unit * Top/Bottom trimming unit (rough & fine) * Corner rounding unit * Radius edge scraper * Glue scraper * Buffing unit Machine Condition: * Excellent working condition. * Regularly maintained. * Available for inspection and testing under power. Lhjdpfxszvb Uxj Alcel

Stanje: rabljeno, Holz Her Sprint 1327 / PPC 231 močna izvedba – debelina robov 0,4 – 8 mm (15 mm) 15-palčni upravljalni zaslon na dotik Power-PC v barvni tehniki motorizirana, pozicionirana nastavitev višine mostu vodilna letev z podaljšanim valjčnim sistemom za natančno dovajanje obdelovanca predrezalni agregat za obdelavo pred lepilno postajo avtomatski podajalnik robnih trakov za valjane in trakaste materiale – SYNCHRO lepilna postaja GLU-JET, kartuše z granulatom + poliuretansko lepilo, tehnologija tankega sloja komplet za visok sijaj Lhjdpfx Asz Az H Rolcjl nastavitev višine nanosa lepila / senzor za nastavitev tiskanje MOT rezalni agregat za valjane in trakaste materiale s pnevmatskim preklapljanjem kota rezalne žage od 0 do 10° rezalni agregat – večfunkcijski, 4 NC-servoosi, obdelava robov, zaokroževanje, faziranje 0,4 – 8 mm (15 mm) agregat za obdelavo robov za faziranje in zaokroževanje, MOT, 2 NC-osi pnevmatsko vklapljanje in izklapljanje kopirni rezalni agregat za zaokroževanje vogalov in vzdolžnih robov, tudi za postforming, višina obdelave 60 mm agregat za obdelavo površine – končna obdelava, pnevmatsko upravljanje agregat za glajenje za dodatno obdelavo in poliranje robov z 2 tekstilnimi diski vrhunski sistemi za škropljenje vhodni del z električno upravljanim razpršilcem za ločilno sredstvo sistem za škropljenje proti statični elektriki izhodni del z električno upravljanim razpršilcem za čistilno sredstvo popolna oprema z orodjem iz najema / leto izdelave 2015 stroj je PO CELOVITI PREGLEDU IN POPRAVILU V ODPRAVLJENI DELAVNICI, v ODLIČNEM STANJU na voljo v skladišču Lieboch