Pretvornik Pretoka In Senzor Masnega Pretoka nakup rabljenega (120.573)

Stanje: nepreverjeno (rabljeno), MICRO-MOTION flow transmitter and MICRO-MOTION mass flow sensor Flow transmitter: Hjdpfx Aoh R Iviof Tjn Model: 3700A1A03BZEZNZ Voltage: 85–250 VAC 3700 Serial No.: 2183431 Sensor Serial No.: 518040 Mass flow sensor: Model: F050SR131SZ Serial No.: 518040 Flow calibration: 33.6384.77 Density calibration: 07339081654.36 D1: 0.00121 / K1: 7338.88 D2: 0.99677 / K2: 8164.88 TC: 4.36 Temperature range: -240 to +150 °C Tube pressure: 100 bar Connection: 40 bar Housing: 0 bar 3 units in stock. Price is per unit.

Stanje: rabljeno, SLA5800 Biotech - MFC - Digitally Controlled Mass Flow Controller for Gas, Mass Flow Controller Elastomer-sealed mass flow controller, flow control, flow meter, flow regulator, thermal mass flow BROOKS INSTRUMENT Type SLA585081BAB1A2S1 Serial No. 01C00500222 Year of manufacture: 2020 (New / unused in original packaging) Series: SLA5800 Biotech Options package: Biotech Premium Package Code T Power supply: 13.5 - 27 VDC (M8 connector, 5-pin, male) Power consumption: max. 10 Watts Interface: PROFINET (2x RJ-45) Optical display: 2 LEDs (NET / MOD) Gas connection: 6 mm Swagelok Valve type: Normally Closed Process gases: O2 (oxygen) active - multiple / O2 (oxygen), N2 (nitrogen), CO2 (carbon dioxide), AIR Calibration gas: N2 (nitrogen) Flow control ranges (full scale): 20,000 sccm (20 liters / minute) Maximum inlet pressure: 4,500 psi (300 bar) Normal operating pressure differential: 60 psig (4 bar) Control range: 2% to 100% of full scale (mechanism range) Typical accuracy from 20 to 100%: ±0.9% of setpoint for 20–100% of full scale Typical accuracy from 2 to 20%: ±0.18% of full scale for 2–20% of full scale Repeatability: ±0.2% of measured value Resolution: 0.1% of full scale Hsdsuqgbyspfx Af Tjn Typical controller response time: [data missing]

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, 1 električni motor SNE IE4, tip: YEA-225S-4 - 37 kW pri 1485 obr/min, 400 voltov, - teža: 390 kg 1 ABB frekvenčni pretvornik: ACS580-01-073A-4J400 Hedpexp Hmyjfx Af Ton

Stanje: zelo dobro (rabljeno), Flow Monitor, Flow Sensor - Manufacturer: Landis & Staefa, Flow Monitor Type QVE81.13, unused, original packaging - Technical data: see photo of the nameplate - Carton dimensions: 305/135/H90 mm - Weight: 0.9 kg Hodjlc Uibspfx Af Tjn

Stanje: zelo dobro (rabljeno), Flow monitor, flow sensor Hedpfx Afjlc Uhwo Ton - Manufacturer: Siemens, flow monitor type QVE81.13, unused, in original packaging - Technical data: see photo of nameplate - Box dimensions: 305/135/H90 mm - Weight: 0.9 kg

Stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: ASL-102f, Rabljeni Bronkhorst merilniki masnega pretoka ASL-102F Model: ASL-102f Proizvajalec: Bronkhorst 200 in/min zrak Hjdpfx Afoxl A Eqs Ten 24°C N.C. kontrolni ventil Prodaja po kosu.

Stanje: zelo dobro (rabljeno), Produkt: D-8061-Flowmeter-Siemens/Danfoss MAG1100 F Digital MAGFLO Flowmeter, Type MAG 6000 Transmitter med touchdisplay. Brugt, størrelse DN15 (1/2") Maks. flow: 20 m³/t Maks. tryk: 20 bar / 290 psi Maks. temperatur: 130 °C / 266 °F Min. temperatur: -30 °C / -22 °F Årgang: 2012 Indgang: 60 V maks. 0,125 A For yderligere oplysninger kontakt os venligst! Hodpfxoirfbwo Af Tsn Fra 2008. Nominel kapacitet: 20,5 kW Overfladeareal (Transmission): 2,7 m² Tryk: 4,5 bar

Stanje: rabljeno, Indramat napajalniki in pogoni Hjdsxrf Twopfx Af Tjn

Stanje: rabljeno, Sensor-actuator distributor, terminal strip, interface, sensor-actuator distributor, sensor actuator - Manufacturer: Weidmüller, sensor-actuator distributor, original packaging - Model: SAI-8-M 5P M12 170125 Hjdpfxohz Utye Af Tjn - Box dimensions: 175 x 65 x H50 mm - Weight: 0.3 kg

Stanje: zelo dobro (rabljeno), Sensor-actuator distributor, distribution bar, interface, sensor-actuator distributor, sensor actuator, sensor/actuator box - Manufacturer: Weidmüller, sensor-actuator distributor in original packaging - Model: SAI-8-M 4P M12 UT - Box dimensions: 170/70/H45 mm Hsdjiqli Njpfx Af Ten - Weight: 0.2 kg

Stanje: zelo dobro (rabljeno), For sale: high-class precision boring head EPB LIBRAFLEX / GRAFLEX with SK40 DIN 69871 shank, made in France. This is a professional tool for precision hole machining—both roughing and finishing—on CNC milling machines and machining centers. This model features micrometric diameter adjustment in the range from Ø2 mm to Ø32 mm (0.079” – 1.260”), enabling the highest accuracy when machining industrial components, molds, or technical parts. 📌 Technical data: - Manufacturer: EPB LIBRAFLEX / GRAFLEX – Made in France - Shank: SK40 – DIN 69871 - Adjustment range: Ø2 – 32 mm - Adjustment accuracy: 0.01 mm / 0.0004” - Precision micrometric scale with clear graduation - Set includes: boring head + toolholder + KOMET tool - Condition: used, in very good technical condition – ready for operation ✅ Advantages: Hjdpfx Ajxizcvef Ton - High adjustment precision – ideal for finishing holes - Robust, industrial-grade construction – long service life - Compatible with CNC machines and conventional milling machines with SK40 interface - Micrometric diameter adjustment with μm-readable scale - Ideal for industrial applications, toolrooms, and precision manufacturing

Stanje: zelo dobro (rabljeno), • Originalni rezkalni nosilec ZÜRN Nemčija • Tip: SK40 – TC40x06x100-AD (DIN 69871) • Visoka natančnost izdelave, uravnotežen za delo na CNC strojih • Oprimek orodja Ø6 mm, dolžina 100 mm • Trdna konstrukcija – nemška proizvodnja (Made in Germany) • Zelo dobro stanje, pripravljen na uporabo Hedpsxcx Susfx Af Tsn

Stanje: zelo dobro (rabljeno), Naprodaj robusten merilni pripomoček priznanega nemškega proizvajalca AbaWerk Aschaffenburg. Izdelan iz litega železa, opremljen z dvema kaljenima središčnima konicama za vpenjanje gredi in cilindričnih delov. Idealen za uporabo z orodnimi mikroskopi, merilnimi projektorji ter pri kontroli kakovosti. Tehnični podatki: • Proizvajalec: AbaWerk Aschaffenburg (Made in Germany) • Razmak konic: cca 115 mm • Stabilna, težka litoželezna osnova – varno vpenjanje • Možnost vrtenja obdelovanca med konicama • Stanje: rabljen, popolnoma delujoč Pripomoček je izdelan v industrijskem razredu – natančnost in vzdržljivost, zaradi katerih so takšni primerki iskani v metrologiji in orodjarnah. Hedpfx Aow Sav Iof Ton

Stanje: zelo dobro (rabljeno), Prodajam originalni pnevmatski dviž J.D. Neuhaus PROFI, model LN-1T, z nosilnostjo 250 kg (0,25 t). Izdelano v Nemčiji, leto 1991, tovarna J.D. Neuhaus Hebezeuge GmbH & Co., Witten-Heven – svetovni vodilni na področju pnevmatskih dvižnih sistemov. Tehnični podatki: • Model: PROFI LN-1T • Nosilnost: 250 kg (0,25 t) • Leto proizvodnje: 1991 • Napajanje: zrak 6 bar • Poraba zraka: pribl. 3–4 m³/min • Veriga: jeklena 5 x 15 mm po DIN 5684-8 • Upravljanje: dvoročno (gor / dol) • Masa: pribl. 35 kg Stanje: • Rabljeno, tehnično brezhibno. • Popoln komplet s kavljem, upravljalnim ventilom in vrečo za verigo. • Naravni sledovi uporabe – brez mehanskih poškodb. Uporaba: Za dvigovanje orodja, delov in elementov v delavnicah, montažnih linijah, industrijskih obratih in območjih ATEX (odvisno od verzije). Konstrukcija JDN zagotavlja zanesljivost in vzdržljivost – izdelano v Nemčiji, uporabljeno v letalski, petrokemični in avtomobilski industriji. Hodpfx Afsxtfnws Ten

Stanje: zelo dobro (rabljeno), Leto izdelave: 1981, skupna masa: 64.000 kg, Drop hammer Huta Zygmunt 7000 kgm, manufactured in Romania under license. Identical to the MPM 2000A model. Hedslnk Tyepfx Af Ton

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, skupna masa: 35.000 kg, Ковашки чук HUTA ZIGMUNT тип MPM 1000A, 3600 кгм, произведен в Румъния, модел CM 1250. Hedjtgpdzjpfx Af Ton

Stanje: rabljeno, Leto izdelave: 2001, TEHNOLOŠKA LINIJA ZA IZDELAVO STREŠNIH ELEMENTOV 1. Profilirni stroj 2. Sistem za izdelavo izolacijskih elementov Hedpfx Afjyv E Ais Ten 3. Sistem za pripravo AL folije 4. Sistem za lepljenje 5. Pomožni elementi, tehnična dokumentacija, certifikati Tipi strešnih plošč, ki se proizvajajo na tehnološki liniji: - strešne plošče modulnih mer 1100mm x 1070mm - strešne plošče polovičnega modula 550 x 1070 mm - strešne plošče brez protikondenznega sloja različnih dolžin (do 6 m)

Leto izdelave: 2022, stanje: rabljeno, Gs international 12t Letnik: 2022 Širina: 2,25 m Hidravlično nastavljiv Hedpfx Aoy Tltcjf Tjn Za vas lahko uredimo tudi prevoz.

Stanje: novo, Pressure: 100 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 800 x 600 Ram area: 800 x 600 Table height: 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 Approx. weight: 5,500 Oil capacity: 200 Control / Key switch: 1. Set-up mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Hedpfx Asm Nntyef Ton Mounting height: 500mm Stroke length: 400mm Table plate: 800 x 600 (with T-slots) (custom designs possible) Ram plate: 800 x 600 (with T-slots) Table height: 850mm (floor to top edge of table plate) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Mobile two-hand operation Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2x workstation lighting 8 free inputs & outputs on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable safety Operating manual & parts list (German) With side safety door (doors slide to the rear)

Stanje: novo, Pressure: 100Motor: 11Installation Height: 500Max. Stroke Length: 400Ram Adjustment: 790 x 600Table Height: Floor to Top of Table - 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mmWeight approx.: 5,500Oil Fill: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 bar Control / Key Switch Modes: Setup Mode – Manual, without light curtain Automatic Mode – Full speed with light curtain Hydraulic System: Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 units, Ø 50 x 30 mm Auxiliary Guides: 2 units, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc – 23 l/min, helical gear pump Speeds: Advance: 110 mm/sec Return: 200 mm/sec Pressure Phase: 9 mm/sec Machine Dimensions: Installation height: 500 mm Stroke length: 400 mm Ram plate: 790 x 600 mm (with T-slots) Table plate: 790 x 600 mm (with T-slots) Table height: 850 mm (from floor to top of table) Hydraulic Accessories: Hydraulic control block & components by REXROTH Hjdpfxjwrkcto Af Ton Pressure setting via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Pressure holding valve Control Accessories: Siemens S7-1200 control system Main control cabinet Safety PLC by SICK Safety light curtains by SICK (700 mm) Linear scale for stroke adjustment 10" BEIJER touchscreen (German & English) Movable two-hand control Ethernet interface for remote maintenance Fault indicator with light and audible alarm Dual workspace lighting Side safety doors (can be swung out) Hydraulic proportional valves Dual-channel safety control Operating manual & parts list (German) Complies with current machinery directive EN 693 Oil quantity: 220 liters (tank volume: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paint finish: RAL 7035 light grey & RAL 7016 anthracite grey

Leto izdelave: 2024, stanje: rabljeno, To ogłoszenie dotyczy zestawu Frozen in Time F100 Automatyczna Liofilizator + Chiller Frigel. Hodpey Tmrmofx Af Ten Urządzenie jest w pełni sprawne i gotowe do natychmiastowego odbioru. Wyjątkowa okazja nabycia wysokowydajnego, przemysłowego zestawu do liofilizacji, zakupionego jako nowy w czerwcu 2024 roku. Ten kompletny pakiet obejmuje zaawansowany liofilizator Frozen in Time F100 wraz z profesjonalną chłodziarką przemysłową Frigel, chłodzoną powietrzem. System był regularnie serwisowany i jest w doskonałym stanie technicznym. Został zaprojektowany z myślą o niezawodnej, ciągłej produkcji. Obecny właściciel wycofuje się z rynku słodyczy liofilizowanych i koncentruje działalność na innych sektorach, co daje możliwość natychmiastowego zakupu sprzętu bez oczekiwania na realizację zamówienia przez producenta. Co zawiera oferta? - [x] 1 x Frozen in Time F100 - Przemysłowy Automatyczny Liofilizator - [x] 1 x Chiller Frigel - Przemysłowa Chłodziarka Wodna, chłodzona powietrzem - [x] 3 x Kompletne zestawy tac produkcyjnych (pełne wykorzystanie 22-miejscowej konfiguracji) - [x] Oryginalna dokumentacja techniczna: kompletne specyfikacje producenta, rysunki konstrukcyjne oraz instrukcje obsługi Parametry techniczne 1. Frozen in Time F100 Automatyczny Liofilizator Przeznaczony do procesów spożywczych i przemysłowych, zapewnia pełną automatyzację od zamrażania kontaktowego po końcowe suszenie, wszystko w jednym, zaprogramowanym cyklu. - Producent: Frozen in Time - Wydajność suszenia: powyżej 100 kg produktu na cykl 16–24 h (w zależności od rodzaju wsadu) - Kondensator lodu: pojemność 150 kg - Wydajność kondensatora: 130 kg / 24 h - Temperatura kondensatora: -60°C - System rozmrażania: Gorący gaz - Półki i sloty: 13 półek, łącznie 22 miejsca na tace - Całkowita powierzchnia półek: 10,4 m² - Odstęp między półkami: 30 mm - Zakres temperatur w komorze: od -50°C do +90°C - Pompa próżniowa: wysokiej klasy Pfeiffer Duo 65 - Chłodzenie: mocny kompresor 155 m³/h na czynnik R404A - Wymiary (W x S x D): 2,1 m x 1,8 m x 3,6 m 2. Przemysłowy Chiller Wodny Frigel (Seria MRS) Chłodziarka procesowa klasy przemysłowej, o bardzo efektywnej konstrukcji i kompaktowych wymiarach, idealna do ustawienia bezpośrednio przy maszynach przetwórczych. - Producent: Frigel - Kompresor: niezawodny hermetyczny kompresor typu Scroll - Czynnik chłodniczy: ekologiczny R410A - Kondensator: efektywna, w pełni aluminiowa technologia mikrokanaliku; wydajność wymiany ciepła wyższa o 20-40% i masa niższa o 60% w porównaniu do tradycyjnych modeli lamelowych - Parametry pracy: zakres temperatur wody od 0°C do 25°C, praca w wysokich temperaturach otoczenia do 45°C - Serwis: wytrzymała konstrukcja, bardzo łatwa w czyszczeniu myjką ciśnieniową

Stanje: rabljeno, Leto izdelave: 2000, potovalna razdalja osi X: 600 mm, pomik osi Y: 430 mm, pomik po osi Z: 460 mm, MORI SEIKI SV-400 S 4. IN 5. OSJO VERTIKALNI OBRATOVALNI CENTER PROIZVAJALEC: MORI SEIKI, IZDELANO NA JAPONSKEM MODEL: SV-400 LETO: 2000 KRMILJE: MORI FANUC MSC 501 Hedpfstvau Hjx Af Ten VELIKOST MIZE: 900,0 x 500,0 mm POMIKI (XYZ): X: 600,0 mm Y: 430,0 mm Z: 460,0 mm HITROST VRETENA: do 12.000 min⁻¹ VRETENSKI KONUS: BT 40 MENJALNIK ORODIJ (ATC): 30 POSTAJ HITRI POMIK (XYZ): 32.000 mm/min PODAJANJE: 1–16.000 mm/min DODATNO: - NIKKEN enota za 4. in 5. os - RENISHAW merilni sistem - DVOJNI transporter za ostružke - HLADILNI SISTEM

Stanje: novo, Pressing Force: 150 t Motor: 15 kW Installation Height: 500 mm Max. Stroke Length: 400 mm Table Size: 900 x 600 mm Ram Area: 900 x 600 mm Table Height: 850 mm Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 mm Weight approx.: 8,000 kg Oil Filling: 400 l Hydraulic C-Frame Press General Information: Design: C-frame, hydraulic Pressing Force: 150 t at 240 bar Return Force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paintwork: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total Weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke Measurement System: Ruler scale (500 mm) Touchscreen: 9" Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free I/O ports for external connections (e.g., robot, coil line) Work area lighting (double) Hydraulic System: Main Cylinder: Ø 270 mm Auxiliary Cylinders: 2 x Ø 70 x 40 mm Auxiliary Guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary Motor: 2.2 kW / 3 HP Hodpfx Aswzzzfef Ten Pump: 45 cc, 65 l/min – REXROTH Auxiliary Pump: present Tank Volume: 500 l Oil Volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, pre-fill valve, hydraulic & mechanical ram lock (top dead center) Pressure & speed adjustable via PLC Mechanical Data: Installation height: 500 mm (distance ram – table top) Stroke length: 400 mm Die depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to table top) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & Electronics: Main control cabinet Pressure & speed adjustment via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Display: 9" Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety system Lateral safety doors (sliding to the rear) Operating instructions & parts list (German), including maintenance plan

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč in malo uporabljen tračni sušilnik podjetja New eco-tec naprodaj. Po želji je možen tudi z izpiralnikom zraka in silosom 180 m³ za posušene materiale. Naprava je bila do nedavnega v obratovanju in je takoj pripravljena za uporabo. Sistem obsega 2 kontejnerja in ima dolžino traku 24 m, projektirano za toplotno moč 1,5 MW. Tračni sušilnik je v kontejnerjih v celoti izdelan iz nerjavečega jekla. Hjdpfxeyr Aiqo Af Ten Ogled možen po dogovoru.

Stanje: novo, Pressure: 60 Motor: 11 Installation height: 450 mm Max. stroke length: 400 mm Table size: 600 x 500 x 80 mm Ram surface: 600 x 500 x 90 mm Hsdommuq Iopfx Af Tsn Table height: 850 mm Dimensions (L x W x H): 1,300 x 2,000 x 2,700 mm Weight approx.: 4,000 kg Oil fill: 200 L Control / key switch: 1. Setup mode, manual, without light sensor (max. 10 mm/sec speed) 2. Automatic mode (at full speed) with light sensor Main cylinder: Ø 150 mm Auxiliary cylinders: 2 pcs Ø 60 x 40 mm Auxiliary guide: 2 pcs Ø 40 mm Motor: 7.5 kW / 11 hp (IE3) Pump: 18 cc – 26 L / ASC Speed: advance 110 mm/sec – return 120 mm/sec; pressure: 11 mm – 5 mm/sec Installation height: 500 mm Stroke length: 400 mm Table plate: 600 x 500 x 80 mm (with T-slots) Ram plate: 600 x 500 x 90 mm (with T-slots) Table height: 850 mm (floor to top edge of table) ----- Hydraulic Accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10–60 tonnes) Speed adjustable via PLC Air cooler Pre-fill valve Control Accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC: SICK Light sensors: SICK 700 + 150 mm Linear encoder for stroke length setting 7” PLC display – Siemens (German & English) Mobile two-hand control Ethernet connection for remote maintenance Alarm indicator for malfunctions (visual & audible) Double work area lighting 8 free I/Os on the PLC for external connections The press meets the Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating instructions & parts list (German) With side safety door (doors can be slid back)