Preskusna Komora Za Temperaturni Šok nakup rabljenega (86.608)

Leto izdelave: 2000, stanje: dober (rabljeno), Nema temperaturna šok komora -40°C do +120°C Proizvajalec: Nema Tip: NTS 3000 / 2S Temperaturno območje: -40°C do +120°C Omrežna napetost: 400 V Nazivni tok: 88 A Nazivna moč: 55 kW Itedpfxjuuiayj Al Nsf Hladilno sredstvo: R 404 A Leto izdelave: 2000 Teža: 5000 kg Zunanje mere: Š 4000 x G 2760 x V 3450 mm Komora: Š 3000 x G 1250 x V 1610 mm TS-06 Financiranje preko naše banke je mogoče. komplett-konzept.leasingo.de Več artiklov – novih in rabljenih – najdete v naši trgovini! Stroški mednarodne dostave na zahtevo!

Stanje: zelo dobro (rabljeno), Weiss Temperature Shock Test Chamber We are offering a temperature shock test chamber. Weiss Temperature Shock Test Chamber, air-cooled (The compressor has been replaced!) Specification: Temperature range, hot chamber: +60°C to +220°C Temperature range, cold chamber: -10°C to -80°C Changeover hot/cold chamber: 10 s Temperature constancy: ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width (without and with swing arm): without approx. 1820 mm, with approx. 1915 mm Depth (without and with test chamber door): without approx. 900 mm, with approx. 1155 mm Basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 litres Maximum load of test chamber: 20 kg Maximum load on test chamber floor: 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. pre-fuse: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of device: approx. 65 dB(A) Cascade cooling, water-cooled Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerants: R 404A / R23 Weight: approx. 950 kg Iodpok E Htyjfx Al Nstf Type: TS 130 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) If you have any further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Air-Cooled Specification: Temperature range hot chamber: +60°C … +220°C Temperature range cold chamber: -10°C … -80°C Transfer time hot/cold chamber: 10 s Temperature constancy: ±1 K Dimensions and additional data: External dimensions: Height 1990 mm Width (without and with door hinge): without approx. 1820 mm / with approx. 1850 mm Iodpslgux Asfx Al Nstf Depth (without and with test room door): without approx. 900 mm / with approx. 1155 mm Basket dimensions (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Maximum test chamber load: 20 kg Maximum floor load in test chamber: 20 kg Cooling water pressure: min. 2 ... max. 6 bar Maximum main fuse: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of device: approx. 65 dB(A) Cooling cascade: water-cooled Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information not binding!) If you have any further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Espec Model: TSD-100 100 liters usable volume for larger test specimens up to 30 kg. Compliant with all common international standards. Ijdpfougl H Sox Al Njtf Water-cooled Temperature range (hot chamber): +60°C to +200°C Temperature range (cold chamber): 0°C to -70°C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrost Overtemperature protection Operating hours counter Mobile version (on castors) 2 stainless steel specimen baskets Cable feedthrough, Ø 100 mm Refrigerants: R404A 1 kg, R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a temperature shock test chamber with a usable volume of 100 liters, suitable for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range, hot chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Program control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design Itjdpjn Smtmefx Al Nef 2 stainless steel test specimen baskets Cable feedthrough Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. power consumption: 32A Type: TSD-100 Condition: used Scope of delivery: (See picture) (Technical changes and errors excepted!) If you have any further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Temperature Shock Test Chamber We are offering you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, water-cooled Specification: Temperature range hot chamber: +60°C to +220°C Temperature range cold chamber: -10°C to -80°C Transfer between hot/cold chamber: 10 sec. Temperature constancy: ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width (without/with door hinge): without approx. 1820 mm / with approx. 1850 mm Depth (without/with test chamber door): without approx. 900 mm / with approx. 1155 mm Internal basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Max. chamber load: 20 kg Max. floor load test chamber: 20 kg Cooling water pressure: min. 2 to max. 6 bar Itjdjm Ak H Hjpfx Al Nef Max. main fuse: 35 A (32 A CEE plug) Sound pressure level, 1 m in front of unit: approx. 65 dB(A) Cascade refrigeration, water-cooled Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information excepted!) For further questions, we are happy to answer your call.

Stanje: zelo dobro (rabljeno), Weiss Thermal Shock Test Chamber We are offering you a thermal shock test chamber. Weiss Thermal Shock Test Chamber, water-cooled Specifications: Temperature range, hot chamber: +60°C to +220°C Temperature range, cold chamber: -10°C to -80°C Transition between hot/cold chamber: 10 s Temperature stability: ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width (without and with door hinge): without approx. 1820 mm, with approx. 1850 mm Depth (without and with test room door): without approx. 900 mm, with approx. 1155 mm Basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Maximum test chamber loading: 20 kg Maximum load on test chamber floor: 20 kg Itodpfx Alslmkn To Nsf Cooling water pressure: min. 2 ... max. 6 bar Maximum pre-fuse: 35 A (32 A CEE plug) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Cascade refrigeration, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 18.7 kW Rated current: 26.0 A Refrigerants: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (see image) (Technical data subject to modifications and errors!) Further questions can gladly be answered by phone.

Stanje: rabljeno, Espec Model: TSD-100 100 litres usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range heating chamber: +60°C to +200°C Temperature range cooling chamber: -70°C to 0°C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Over-temperature protection Operating hours counter Mobile design 2 stainless steel specimen baskets Cable port Ø 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg For your safety as a buyer, please note the following information! The following points are performed on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate Isdsxugq Aopfx Al Nstf 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and information!) If you have any further questions, we will be happy to answer them by phone.

Stanje: dober (rabljeno), Leto izdelave: 1999, Nema NCG 4390 S temperaturni šok komora -40°C do +180°C Proizvajalec: Nema Tip: NCG 4390 S Ijdouzgt Ejpfx Al Netf Temperaturno območje: -40°C do +180°C Območje rosišča: +5 °C do +89 °C Omrežna napetost: 400 V Nazivni tok: 32 A Nazivna moč: 15 kW Hladilno sredstvo: R 404 A Letnik: 1999 Teža: 2720 kg Zunanje dimenzije: Š 3950 x G 1700 x V 2280 mm Komora: Š 3000 x G 1300 x V 1170 mm WLG DAMPF-O-MAT Avtomatski električni parni zračni vlažilec in generator pare brez mineralov in vonja Proizvajalec: WLG DAMPF-O-MAT Tip: EDB 8 Grelnik napetost: 400 V Moč: 6 kW Količina pare: 8 kg/h Vodno hlajeni kondenzator Proizvajalec: Bitzer Vodno hlajen Omrežna napetost: 400 V Nazivni tok: 13 A Nazivna moč: 4 kW Hladilno sredstvo: R 404 A Teža: 145 kg KK-08 Možno je financiranje prek naše banke. komplett-konzept.leasingo.de Dodatni artikli - novi in rabljeni - so na voljo v naši trgovini! Stroški mednarodne dostave na zahtevo!

Stanje: zelo dobro (rabljeno), Weiss SC 1000/+20 IU Corrosion-Climate Alternating Test Chamber Weiss SC 1000/+20 JU Corrosion-Climate Alternating Test Chamber Itedpfsph U Dhsx Al Nsf The test system combines a climate test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. In accelerated testing, susceptible metallic components are inspected for corrosion in accordance with relevant standards. Temperature Operating Range Temperature: +20 °C ... +60 °C temporal temperature deviation: ±0.5 K Climate Operating Range Temperature: +20 °C ... +60 °C temporal temperature deviation: ±0.5 K relative humidity: 10...98 % r.h. temporal humidity deviation: 3...5 % r.h. dew point: +12 °C ... +59 °C Salt Spray Test SS (temperature range: ambient temperature +5 K ... +50 °C) according to DIN 50 021 (salt mist via 2-substance nozzle, 1.5 x 0.5 m V80 cm³/h) Control Digital measuring and control system SIMCON/32*-Net with touch control panel Interfaces - serial interface RS 232 C - parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Climate mode - Salt spray test - Direct spraying with saline solution - Condensation water load - Rinsing of test chamber walls - Drying/ventilation of the test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: psychrometric fresh measurement device tft’ (with forced humidification) Technical Data SC 1000/+20 JU Internal dimensions Height up to eaves approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test chamber door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including aggregate parts and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch panel approx. 1700 mm Depth approx. 2600 mm Maximum floor load 100 kg Brine storage tank approx. 200 l, with level monitoring, located separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Connected load: 13 kW Weight: 1300 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Leto izdelave: 2007, stanje: dober (rabljeno), številka stroja/vozila: 53, Proving chamber pentru 8 cărucioare, marca Pietroberto, tip PB-CF10T, anul fabricației 2007, seria 53, fabricat în Italia. Volum cameră de fermentare: 12,02 mp ▪ Putere: 4 kW ▪ Element de încălzire dublu: 1,8 x 2 kW ▪ Temperatură maximă: 45°C ▪ Motor ventilator Siemens: 0,25 kW Iodpfx Aljm Uywao Njtf ▪ Umiditate maximă: 90% ▪ Prevăzută cu ferestre de vizualizare la fiecare ușă ▪ Cameră prevăzută cu 4 uși pe ambele părți ▪ Echipată cu întrerupătoare electromecanice ▪ Control digital ▪ Barieră de protecție, pereți interiori și exteriori din oțel inoxidabil ▪ Unitate de aer condiționat și ventilatoare din inox ▪ Reglare constantă a temperaturii și umidității aerului ▪ Dimensiuni exterioare (LxlxÎ): 2.500 mm x 2.000 mm x 2.300 mm ▪ Dimensiuni interioare (LxlxÎ): 3.250 mm x 1.850 mm x 2.000 mm ▪ Structură și cadru complet din aluminiu, doar structura! ▪ Necesită o sursă de apă independentă, cu filtru pe faza de intrare. Camera de dospire este corect demontată și depozitată pe paleți, având inclus și schița de asamblare realizată la momentul demontării. Preț: 2.400 Euro + TVA, FCA Oradea/România NOTĂ: Anunțul de față nu reprezintă o ofertă fermă din partea noastră către terți, și nu conține o solicitare pentru depunerea unei oferte ferme către noi. Acest anunț are rol exclusiv informativ, ca punct de pornire pentru eventuale negocieri contractuale ulterioare. În cazul în care sunteți interesat(ă) de utilaj, vă invităm să ne contactați fără obligații, folosind datele noastre de contact sau funcția „Trimite mesaj”, menționând în fiecare caz numărul de telefon și adresa de e-mail. Ulterior, vă vom transmite cu plăcere condițiile noastre comerciale și o ofertă. Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français / Vorbim româna.

Stanje: zelo dobro (rabljeno), Here we offer a Vötsch shock test chamber. Temperature shock test chamber, water-cooled Two-chamber design Hot chamber: Temperature range for the hot chamber: +50°C to +220°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature range for the cold chamber: -80°C to +70°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions (W x D x H): 470mm x 650mm x 410mm External dimensions (W x D x H): 930mm x 2115mm x 1970+mm Port diameter: 67mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Type: VT 7012 S2 Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and error!) Iodpfeigg Hnox Al Notf If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Product description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. This chamber is ideal for rapid temperature change testing (e.g. according to IEC, MIL‑STD, JEDEC standards) and has been well maintained. Volume & Internal Dimensions: Test volume: 60 litres Internal dimensions (basket/test chamber, W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Cycling: Hot chamber: +50 °C to +220 °C Cold chamber: −72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate: up to 17 °C/min Cooling rate: up to 3.7 °C/min In single mode (cold zone only) heating rate: approx. 3.2 °C/min Temperature Deviation & Homogeneity Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Payload & Lift System Basket/lift system load: 20 kg maximum load capacity Transfer basket secured by protective grid on all sides Additional Features & Equipment Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Itedoxr A R Tjpfx Al Nef Rated power: approx. 8.5 kW Rated current: approx. 25 A External fuse: 32 A Refrigerants R-404A / R-23 Weight: 800 kg For your security as the buyer, the following procedures are performed on every chamber we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Leto izdelave: 2000, obratovalne ure: 104.382 h, stanje: zelo dobro (rabljeno), Vötsch Shock Test Chamber VT 7012 S2 System for Extreme Temperature Changes The temperature shock test evaluates the resistance of components, devices, and other products to rapid changes in ambient temperature. Test specimens are subjected to rapid temperature changes in air, alternating between upper and lower temperature levels under varying load conditions. Through these cyclic stresses and temperature-change-induced accelerated aging, potential weaknesses in the specimen can be identified. - Vertical arrangement of test chambers - Ball screw drive for secure carriage guidance Isdpfsx Exmtox Al Netf - Carriage load capacity: 50 kg (VT3 7012 S2) - All-around mesh baskets secure the test specimens - High air circulation rate for short temperature change times and even temperature distribution in the test chamber - Warm chamber can be used as a temperature storage unit; cold chamber can be used as a temperature cycling unit - Minimal energy consumption - No compressed air required Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test Chamber Volume: 120 l Rated Voltage: 400 V Rated Power: 10 kW Rated Current: 25 A Refrigerant: R452A Cooling Unit: Water-cooled Shock Cooling (nitrogen cooling) via customer-supplied liquid nitrogen feed External Dimensions: Width: 930 mm Depth: 2115 mm Height: 1970 mm Test Chamber Dimensions: Width: 470 mm Depth: 650 mm Height: 410 mm Protection Class: Device: IP 42 Control unit: IP20 Switch cabinet: IP 54 Key Parameters for Temperature Tests in Single-Chamber Operation: Temperature Range: Warm chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K (in steady state) Temperature deviation spatially: ±2 K (in steady state within carriage) Warm chamber heating rate: 11 K/min Cold chamber cooling rate: K/min Cold chamber heating rate: 2 K/min Warm chamber cooling rate: K/min Observation window: 355 x 355 mm Cable port: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg Financing through our partner bank is available. komplett-konzept.leasingo.de More articles—new and used—can be found in our shop! International shipping rates upon request!

Stanje: rabljeno, Weiss Type: TS 130 Itedpfx Aevwckhsl Nsf Temperature Shock Test Chamber, Water-Cooled Specification: - Temperature range hot chamber: +60°C to +220°C - Temperature range cold chamber: -10°C to -80°C - Transfer between hot/cold chamber: 10 sec. - Temperature stability: ±1 K Dimensions and further data: - External dimensions: Height 1990 mm - Width (without and with door hinge): without approx. 1820 mm / with approx. 1850 mm - Depth (without and with test chamber door): without approx. 900 mm / with approx. 1155 mm - Basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm - Volume: 130 liters - Maximum test chamber load: 20 kg - Maximum floor load in test chamber: 20 kg - Cooling water pressure: min. 2 ... max. 6 bar - Max. circuit protection: 35 A (plug 32 A CEE) - Sound pressure level, 1 m in front of unit: approx. 65 dB(A) - Refrigeration cascade, water-cooled - Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW - Rated current: 26.0 A - Refrigerants: R404A / R23 - Weight: approx. 950 kg Condition: used Scope of delivery: (see picture) (Changes and errors in technical data reserved!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Type: VT 7012 S2 Water-cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C Temperature deviation over time at center of usable space: ±1 K Temperature deviation spatially: ±2 K Temperature change rate Heating: 11 K/min Iedpex Hhfhofx Al Netf Cold chamber: The temperature range of the cold chamber is from -74.5°C to +70°C Temperature deviation over time at center of usable space: ±1 K Temperature deviation spatially: ±2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Internal dimensions (W x D x H): 470 mm x 650 mm x 410 mm External dimensions (W x D x H): 930 mm x 2115 mm x 1970+ mm Access port: ∅ 67 mm Voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerants: R-452A / R-23 Weight: 1000 kg For your security as a buyer, please note the following information! The following steps are carried out in advance for our offered chambers: 1. Function test and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and error in technical data and details!) We will be happy to answer further questions by phone.

Stanje: rabljeno, Leto izdelave: 1909, 3D Systems ProCure 750 Used for curing 3D-printed parts during the development phase at an automotive manufacturer. All lamps are functioning, and the turntable rotates smoothly. Iodpfx Aev Upuuel Njtf

Leto izdelave: 2021, obratovalne ure: 4.748 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 litres, year of manufacture 2021, operating hours 4748.2 h For sale is a used temperature test chamber manufactured by Weiss Technik. The test chamber is used to examine components and materials under various temperature conditions (e.g., cold, heat, ageing). Designation breakdown: T = Temperature Test Chamber 1000 = approx. 1000-litre volume 70 = Low-temperature range (-70°C) e = Energy-optimised design 5 = Temperature change rate (series) Equipment: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical Data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 litres Temperature range: approx. -70°C to +180°C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Itjdpfx Aoy Dd Nqjl Njf Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to alteration and errors in technical data. Further details available on request!) For further questions, we are happy to assist you by phone.

Leto izdelave: 2021, obratovalne ure: 5.128 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 litres, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber manufactured by Weiss Technik. The test chamber is used to test components and materials under various temperature conditions (e.g. cold, heat, ageing). Itsdpfxsy Dclwe Al Njf Meaning of model designation: T = Temperature test chamber 1000 = approx. 1000 litre volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Equipment: - Stainless steel inner chamber - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical Data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 litres Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Nominal current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg Important information for buyer safety! The following checks and works are carried out on all chambers we offer before delivery: 1. Functional testing and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) We are happy to answer any further questions by phone.

Leto izdelave: 2021, obratovalne ure: 5.018 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, Year of manufacture: 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This test chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging). Meaning of the designation: T = Temperature test chamber 1000 = approx. 1000-liter capacity 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change speed (series) Equipment/features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Observation window - Automatic/manual temperature control Iodoy Dclqspfx Al Netf Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: - Cooling: approx. 6 K/min - Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg Important safety information for buyers! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Leto izdelave: 2021, obratovalne ure: 5.128 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 5128 h For sale is a used temperature test chamber from Weiss Technik. Iodpfx Aley Dck Ts Nstf The chamber is used to test components and materials under various temperature conditions (e.g. cold, heat, aging). Meaning of the designation: T = temperature test chamber 1000 = approx. 1000-liter volume 70 = low-temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Equipment: - Stainless steel interior - Recirculation air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, the following measures are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change, errors and omissions excepted!) If you have further questions, we will be happy to answer them by phone.

Leto izdelave: 2021, obratovalne ure: 4.748 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4748 h For sale is a used temperature test chamber manufactured by Weiss Technik. The chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Meaning of designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Features: stainless steel inner chamber recirculation fans touch control panel (WEBSeason) observation window automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: cooling approx. 6 K/min heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Nominal current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, please note the following: The following procedures are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data, details may vary!) Itjdpfx Aley Dciis Nof We are happy to answer further questions by phone.

Stanje: rabljeno, kapaciteta rezervoarja: 31.000 l, SPLOŠNO Oprema: žerjavne ušeske Izvedba: stoječa Notranji premer: 2.800 mm Skupna višina: 5.800 mm Lokacija: zunanji sklad Identifikacijska ploščica: Prostornina: 31.000 litrov Material v stiku z izdelkom: V2A 1.4301 (AISI304) Stanje: rabljeno Zadnja uporaba: sadni sok REZERVOAR Način postavitve: nastavljive noge po višini Število nog: 5 kosov OPREMA Izpust: prisoten Itodpoyckfnefx Al Nof SESTAVA MATERIALA Material nog: nerjavno jeklo

Leto izdelave: 2020, obratovalne ure: 6.126 h, stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber TempEvent T/1000/70/5, water-cooled, 1000 liters, year of manufacture 2020, hours of operation: 6,126 h. Description: For sale is a high-quality climatic test chamber by Vötsch Industrietechnik (Weiss Technik), model TempEvent T/1000/70/5. This unit is used for the simulation of temperature conditions and is ideally suited for: - Material testing - Electronics testing - Environmental and aging tests - Quality and endurance testing The chamber can produce both extremely low temperatures down to approx. -70 °C as well as high temperatures up to +180 °C and change these at a defined rate (temperature ramps). Precise control enables reproducible test conditions. Operation is convenient via an integrated touch panel. Features: - Fast temperature changes (up to 5 K/min) - Uniform temperature distribution in the test chamber - Water-cooled system - Industrial standard – robust construction - Maintenance indicator and hour meter available Technical data: Model: TempEvent T/1000/70/5 Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to 5 K/min High precision & stability: - Temporal temperature deviation: ±0.1 to ±0.5 K → very stable temperature over time - Spatial deviation: ±0.5 to ±1.0 K - Temperature gradient: ≤ 2.0 K This makes the chamber ideal for demanding testing processes with high repeat accuracy Test chamber dimensions: approx. 950 × 1100 × 950 mm (W × H × D) External dimensions: approx. 2000 × 1415 × 2030 mm (W × H × D) Side ports: 50 cm / 125 cm Electrical data: 400 V / 3~ / 50 Hz Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: - R449A (approx. 2.9 kg) - R23 (approx. 1.3 kg) Weight: approx. 1,200 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If needed, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical specifications reserved!) Itsdpfeyxm Ulsx Al Nsf For further questions, please contact us by phone.

Stanje: rabljeno, -Voziček: 600x800 ali 1000x800 Iodpowxymusfx Al Netf Prenovljena oprema: Oprema je pripravljena po naročilu, termini prevzema in vračila se dogovorijo takrat (prosim, povprašajte za ceno po prenovi)