Or Laser 3D Tiskalnik nakup rabljenega (27.282)

Stanje: rabljeno, Leto izdelave: 2018, 3D printer Laser type / power: Yb fiber laser / 250 W Wavelength: 1070 nm Lens: F-theta precision lens Build volume: Ø 100 mm x 100 mm Reservoir volume: Ø 200 mm x 200 mm Nlsdpfovtftqjx Abrec Coater: Rotation-guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 – 100 μm Scan speed: Jog 20 m/s, Operation 6 m/s Spot size: min. 40 μm Chamber opening: 450 x 180 mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, BAYKAL LASER SCHNEIDMASCHINEN FÜR ROHRE: BLT 2D oder 3D Schnitt, erhältlich von 1 Kilowatt bis 6 Kilowatt. Diese Laserschneidanlage für Rohre bietet höchste Schnittqualität – Sägen, Bohren oder Entgraten sind nicht mehr erforderlich. Die BAYKAL BLT 2D oder 3D Lasertube ist eine schnelle und flexible Rohrlaserschneidanlage, verfügbar mit 6 oder 8 Meter Bearbeitungslänge sowie der Möglichkeit zum Schneiden von XXL-Rohren bis zu 220 mm Durchmesser und rechteckigen Profilen bis 220 x 220 mm. Es können Wandstärken bis 10 mm im Baustahl verarbeitet werden. Wichtige technische Daten zu den BAYKAL BLT 2D oder 3D Lasertubes: Maximaler Außendurchmesser bei Rundrohr (mm): 220; Maximaler Außendurchmesser bei Rechteckrohr (mm): 220 x 220; Maximal zulässiges Werkstückgewicht (kg/m): 70. Technische Angaben zur Beladung: Lademöglichkeit 1 (vorne/hinten): Bündelladung; Lademöglichkeit 2 (vorne/hinten): Halbautomatische Beladung; Lademöglichkeit 3: Manuell; Minimale Beladelänge (m): 2 Meter; Maximale Entladelänge (m): 4–6 Meter; Bündelladekapazität (kg): 3500 kg. Technische Angaben zur Entladung: Drei programmierbare Positionen, hinteres Förderband sowie motorisierte Vorder- und Rückführentische. Entladelänge (m): 4–6 Meter. Nsdpfsrt Hurox Abrelc

Stanje: pripravljen za uporabo (rabljen), Keyence LJ-V7060 2D/3D laserski profilni senzor / merilna glava SN:38120276, rabljen, dobro ohranjen, 100% delujoč, dobava po fotografijah. Nledpox Et Avofx Abrjc

Stanje: pripravljen za uporabo (rabljen), Keyence LJ-V7060 2D/3D laserski profilni senzor / merilna glava SN:38710816, rabljeno, dobro ohranjeno, 100% delujoče, obseg dobave po slikah. Nlsdpfjx Et A Ajx Abrjc

Stanje: zelo dobro (rabljeno), Concept Laser X Line 2000R BC2 Dual Laser Proizvajalec: Concept Laser GmbH / GE Additive / Colibrium Additive Tip: X Line 2000R BC2 Letnik izdelave: 2015 Tip stroja: 3D-tiskalnik za kovine Postopek: LaserCUSING® / postopek na prašnem sloju Laserski sistem: Dvojni laser (Dual Laser) Obdelovani material: AlSi10Mg Naprodaj je industrijski 3D-tiskalnik za kovine proizvajalca Concept Laser. Sistem je zasnovan za aditivno proizvodnjo kovinskih komponent po metodi prašnega sloja in je primeren za raziskave, razvoj, prototipiranje ter industrijsko serijsko proizvodnjo. BC2 nadgradnja / modernizacija Sistem je bil nadgrajen na novejši standard BC2. Po priloženi dokumentaciji je bila izvedena obsežna posodobitev z zamenjavo številnih sklopov in komponent. Tako ima stroj bistveno posodobljene funkcionalnosti in sistemsko stanje v primerjavi z zgodnejšimi modeli X Line 2000R. Tehnični podatki Priključna napetost: 3P/N/PE AC 400 V ±10 % Frekvenca: 50 / 60 Hz Maks. tokovna obremenitev: 17 A na fazo Dovod stisnjenega zraka: 7 – 8 bar Dovod inertnega plina: 5 bar Hlajenje: sistem s vodnim hlajenjem Dimenzije stroja pribl.: 5.300 x 2.700 x 2.760 mm (D x Š x V) Teža pribl.: 13.400 kg Oprema Dvojni laserski sistem Sistem za ravnanje s prahom Materialni transport Filtrirne enote Dovod procesnega plina Električne omare Upravljalni in krmilni sistem Delovna ploščad z dostopnimi stopnicami Vodno hlajen laserski sistem Obstoječa periferni oprema po slikah Dokumentirane servisne storitve 06/2026 Servis podjetja Colibrium Additive / GE Additive Zamenjava sistema VarioScan vključno z ustrezno E-box enoto Izveden funkcijski preizkus Po končanih delih niso bile zabeležene napake Obratovalni podatki Laser 1 RET: pribl. 26.808 h Laser 2 RET: pribl. 38.419 h Opomba: RET prikazuje čas, ko so bili laserji pripravljeni za delo. Ni enak dejanskemu času osvetlitve ali proizvodnje. Področja uporabe Aditivna proizvodnja kovinskih komponent Nodpfjzcn Efjx Abrelc Letalska in vesoljska industrija Avtomobilska industrija Orodjarstvo in izdelava kalupov Raziskave in razvoj Proizvodnja prototipov Industrijska serijska proizvodnja Obseg dobave Glavna naprava Concept Laser X Line 2000R BC2 Komponente za ravnanje s prahom Filtracijska tehnika Obstoječa periferna oprema po slikah Dodatna oprema po trenutnem obsegu dobave Stanje Rabljeno Stroj iz industrijske proizvodnje Lasersko okno čisto in prozorno Vizualno stanje po slikah Ogled možen po predhodnem dogovoru Zaradi velikosti in teže priporočamo strokovno demontažo, nakladanje in organizacijo transporta. Razpoložljivost: po dogovoru. Obseg dobave kot na slikah. Spremembe in napake v tehničnih podatkih ter vmesna prodaja pridržani.

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11105234, TECHNICAL DETAILS Maximum load capacity: approx. 37 kg Rated load capacity: approx. 30 kg Maximum reach: approx. 2101 mm Repeatability: 0.05 mm (ISO 9283) Number of axes: 6 Operating ambient temperature: 0 °C - 55 °C (273 K to 328 K) Storage & transport ambient temperature: -40 °C - 60 °C (233 K to 333 K) Positioner Model: KUKA DKP400 V2 Two-Axis Positioner Electrically insulated faceplate Air cooler Model: Thermo Chiller HRS050-AF-20 MACHINE DETAILS Drive Model: Meltio Engine V2.0 Power: 7.5 kW Frequency: 50/60 Hz Full load current: 22 A 3W + N + PE, 200-240 / 380-415 V, 16A 3W + PE, 200-240 V, 25 A 2W + PE, 200-240 V, 40 A Control system Model: KR C5-2, KR C5 Integrated software: Melito Engine Dual Wire & Melito Engine Hot Wire Protection rating: IP65 (IEC 60529) Central hand protection: IP65 / IP67 (IEC 60529) Dimensions Overall dimensions (L x W x H): 5,000 x 4,000 x 4,000 mm Sliding door opening dimensions: 2,000 x 3,000 mm Nledpfx Asyvzuhobrec EQUIPMENT Laser safety cabin, lightproof 4 controllers in one system Roof closed and removable Note: Images 1 & 2 show the assembled condition at the last operator.

Stanje: zelo dobro (rabljeno), EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The system has been regularly serviced (last service: 08/2024). The unit has been operated exclusively with PA11 (EOS PA1101). System including accessories: 1 x build box, docking station, multibox with cooler. Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been fully tested." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for the additive manufacturing process (Selective Laser Sintering, SLS). The unit is suitable for producing complex plastic components for serial production and prototyping. Base machine with control cabinet & control terminal Interchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C service water Pump capacity: 5 l/min at 3.5 bar Electrical capacity: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. fill: 420 g) The multibox is a typical accessory for powder handling in EOS systems. Used for transport and interim storage of the material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-Theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure field: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): travel 690 mm, max. speed 200 mm/s Z-axis (build platform): travel 650 mm, max. speed 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Nedpfexw Uyqjx Abrelc Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Extraction chamber heating: 1.6 kW, resistance heating coil with separate temperature measurement Control & Operation: Process computer with Windows 7 operating system 15.1" TFT display, membrane keyboard & mouse Ethernet network connection Other: Sound emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Circuit protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Interchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Subject to technical changes and errors! All information provided without guarantee.) For further questions, please feel free to contact us by phone.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, OPIS SH3 Popolnoma zaprti stroj za rezanje z vlaknastim laserjem Njdpfx Asxfrhnsbrslc Serija SH je popolnoma zaprti stroj za rezanje z vlaknastim laserjem, ki ga neodvisno razvija in proizvaja Baison Laser. Primeren je za rezanje kovinskih pločevin, kot so ogljikovo jeklo, nerjavno jeklo, aluminijeva zlitina, titanova zlitina in pocinkano aluminij-cink pločevino. Zadovoljuje različne potrebe rezanja srednje debelih in tankih pločevin. Tehnične specifikacije Značilnosti • Popolnoma zaprt zaščitni pokrov tudi na zadnji strani stroja v skladu s CE; • Električni nadzor vrat in platforme z zadnjo nadzorno ploščo in gumbom za nujne primere; • Dvojni nadzorni LCD zasloni (videokamere + krmilnik); • Gumb za nujne primere tudi na daljinskem upravljalniku; • Dvojni dvižni mizi na isti ravni za dodatno natančnost; • Električna omara v skladu s CE s varnostnim relejem in klimatsko enoto; • Samostojna omara za laserski vir, prav tako s klimatsko enoto; • Laserska zaščita stekla OD4+ s popolnim ohišjem v skladu s CE; • Gumijasta tesnila okoli spodnjega dela stroja za učinkovitejše odvajanje dima. Obdelovalno območje in delovni hod Območje obdelave (D × Š): 3.050 x 1.530 mm X-osni hod: 1.530 mm Y-osni hod: 3.050 mm Z-osni hod: 100 mm Maks. nosilnost posamezne dvižne platforme: 800 kg Natančnost Natančnost pozicioniranja osi X/Y: ±0,03 mm/m Ponovljivost pozicioniranja osi X/Y: ±0,02 mm Hitrost Maks. hitrost premikanja: 120 m/min Maks. pospešek: 1,5 G Energetski parametri Napajanje: 380V/50Hz/3 faze Zaščitni razred: IP54 Teža in dimenzije Dimenzije stroja: 8.896 × 2.440 × 2.210 mm Teža stroja: 5.800 kg Cena je EXW (skladišče Evropa), vključuje nakladanje na tovornjak. Prevoz, montaža, zagon, izobraževanje in letne servisne pogodbe so na voljo na zahtevo za doplačilo. Montažo in izobraževanje vedno izvaja naša visoko usposobljena servisna ekipa na treh lokacijah v Evropi: Nizozemska, Nemčija, Romunija. Uradni prodajalec CNC Top Ten bv Coevorden, Nizozemska

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, laserska moč: 6.000 W, najv. debelina pločevine: 25 mm, najv. debelina jeklene pločevine: 25 mm, teža obdelovanca (maks.): 800 kg, skupna masa: 5.000 kg, skupna dolžina: 5.000 mm, skupna širina: 2.500 mm, skupna višina: 2.200 mm, trajanje garancije: 12 meseci, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.500 mm, delovno območje: 3.000 mm, With the OR-S1530, Oree Laser offers a compact and user-friendly large-format laser cutting system. Our company, SF-Tech Engineering GmbH, is the official Swiss representative of Oree Laser. Nledpfxor D N Dzo Abroc All machines are newly imported and assembled to customer specifications. Training and after-sales service are also provided by us. In our showroom, you can test the OR-S1530 together with all accessories (high-pressure compressor, extraction system, etc.). Technical Data Working area: 3060mm x 1530mm External dimensions: L: 4950mm, W: 2300mm, H: 2130mm Weight: approx. 4,500kg Positioning accuracy: 0.03mm Max. cutting speed: 115m/min Maximum acceleration: 0.8G Laser power: 6,000 Watts Laser source: MAX Cutting head: Raytool or BOCI Fume extraction: Zone-controlled extraction The side machine door can be easily raised or lowered at the push of a button. The total height of the machine is 2,200mm. The worktable can be slid sideways out of the machine by hand, allowing safe and efficient loading and unloading. There are now two versions available: 1. 60% pull-out table, without ground support, max. load capacity 800kg. 2. 120% pull-out table, with folding support arms, max. load capacity 900kg. Don’t hesitate to visit us in our showroom at 6281 Hochdorf.

Stanje: dober (rabljeno), 3DGENCE Typ: Industry F420 Letnik izdelave: 2021 Tehnični podatki: Delovni prostor: 380 × 380 × 420 mm (60.648 cm³) Zunanje mere (Š x G x V): 900 mm x 950 mm x 1950 mm Tiskalni sistem: Dvojni ekstruder z vgrajenim čistilnim sistemom Nledpszg Tzlsfx Abrec Premer filamenta: 1,75 mm Tiskalni material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Podporni material: Topljiv podporni material ESM-10, HIPS Komora za filament: 4 reže za filament z avtomatskim sistemom menjave Temperatura tiskalne glave (maks.): 500°C Temperatura tiskalne plošče (maks.): 180°C Temperatura delovne komore (maks.): 180°C (aktivno ogrevanje) Temperatura komore za filament (maks.): 50°C Stanje: rabljeno Obseg dobave: (glejte slike) Teža: 350 kg (Podatki in tehnične informacije so lahko predmet sprememb ali napak!) Za dodatna vprašanja smo vam z veseljem na voljo po telefonu.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Stratasys 3D Printer PolyJet J750 With the Stratasys J750 3D printer, you can optimize and streamline the process of producing models from various materials on a single build platform within the same print job. During the design phase, components of a model can be assigned colors. The model can then be saved as a VRML file and printed with the desired colors. Ongoing maintenance package until June 2026, including spare parts. The Stratasys J750 3D printer features a build volume of 490 mm × 390 mm × 200 mm (19.3 × 15.35 × 7.8 in). Nljdoyly Auopfx Abrjc Power connection 100–120 VAC, 50–60 Hz, 13.5 A, single phase or 220–240 VAC, 50–60 Hz, 7 A, single phase Technical specifications Overall length: 1,400 mm Overall height: 1,100 mm Overall width: 1,260 mm Input electricity type: Alternating current (AC) Net weight: 430 kg Input voltage: 230 V Input current: 13 A Input frequency: 50–60 Hz Ambient temperature (min.): 18 °C Ambient temperature (max.): 25 °C Applications Rapid prototyping Concept modeling Medical models Production tools and jigs Color textures

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, obratovalne ure: 300 h, The price applies to the machine from the demo center, including an additional tank and a second build platform. - Build volume: 250*250*250 mm - Scanning speeds up to 12 m/s - Layer thickness from 0.05 mm - Accuracy of +/- 0.1% over segment length - Granite return frame - Control of key operating parameters - Pump-fed refill capability - High-performance vacuum recoating system - Key components from Spectra-Physics, Advanced Optowave, SCANLAB, and Panasonic Nledpfjhvim Esx Abrsc The machine features an open material platform – consumables from all manufacturers can be sourced directly and processed. Transport, commissioning, and consumables are not included in the price. The local UnionTech partner handles installation, training, and service!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 200 h, The system is located at the BIBUS Austria Demo Center and can be inspected and tested at any time. In total, the device can process 14 materials – in addition to common plastics such as ABS, PLA, TPU, and Carbon PA, it also supports high-performance polymers such as Ultem, Peek, CarbonPeek, and Helios-Peek. The Hyperspeed upgrade can be performed at any time and increases the system’s productivity in dual mode by 65%. The cost for this is €35,000, including hardware, software, and service. Four material dryers are included in the scope of delivery. Payment terms: advance payment, exclusive of transport and commissioning – these costs are location-dependent and will be invoiced based on the delivery address. Nlsdpsibikwsfx Abrjc

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 200 h, skupna dolžina: 2.128 mm, skupna širina: 1.294 mm, vhodna napetost: 400 V, trajanje garancije: 6 meseci, vhodni tok: 32 A, laserska moč: 100 W, kapaciteta rezervoarja: 32 l, volumenski pretok: 20 m³/h, Stroj za lasersko sintranje poliamida z dvema izmenljivima posodama in razpakirno postajo. Stroj si je mogoče kadar koli ogledati in preizkusiti v demo centru BIBUS-Austria. Poleg tega ima sistem hitro menjavo med vlečno rezilo in premaznim valjem – sistem je vedno na najnovejšem tehnološkem nivoju, saj so se izvajale stalne nadgradnje. Nlodpfxoqwkype Abroc

Stanje: rabljeno, TECHNICAL DATA - Maximum print size: 490 x 390 x 200 [mm] - Maximum print volume: 38.22 [L] - Minimum layer thickness: 0.02 [mm] - XY accuracy: 0.03 [mm] - Materials: Thermoplastic - Power supply: 110-240 [VAC] 50/60 [Hz] 1.5 [kW] WEIGHT AND DIMENSIONS - Required floor space: 1,400 x 1,260 [mm] - Machine height: 1,100 [mm] Nljdpfx Abeuhcbporec - Machine weight: 429 [kg]

Stanje: rabljeno, Stratasys Objet Objet30 Prime V3 + Cleaning Glovebox Technical Specifications: Machine dimensions: 82.5 × 62 × 59 cm; 106 kg Build platform: 294 × 192 × 148.5 mm Layer thickness: 28 µm; 16 µm for VeroClear material Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material, and post-processing method Model materials: - Transparent, rigid (VeroClear) - Rigid, opaque, white (VeroWhitePlus) - Rigid, opaque, blue (VeroBlue) - Rigid, opaque, black (VeroBlack) - Rigid, opaque, grey (VeroGray) - Polypropylene-like (DurusWhite and Rigur) - Heat-resistant (RGD525) Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Manufacturer: Objet/Stratasys Model: Objet30 Pro Nlodpfx Aozgcqcebroc Condition: used Scope of delivery: (see pictures) (Specifications and technical data are subject to change and errors may occur!) If you have further questions, we are happy to answer them by phone. Written orders possible via email or fax.

Leto izdelave: 2024, obratovalne ure: 500 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Tukaj se prodaja celovit koncept. 1. 3D kovinski tiskalnik Trueprint 1000 G06, l. 2024, 500 laserskih ur 2. Ultrazvočna sito postaja Assonic 1000, stara 1 leto Njdpfozdq Rfox Abrolc 3. Moker ločevalnik Ruwac NA7-11, star 1 leto 4. F 90 omara za materiale, stara 1 leto 5. Köttermann omara za tlačne plinske jeklenke, rabljena, inštalacija v omari stara 1 leto 6. Odsesovalni sistem za prostor in za omaro za tlačne plinske jeklenke. Dovod zraka v odsesovalnem sistemu je opremljen z grelnim elementom in lahko vpihuje predhodno ogret zrak (pozimi). Vse naprave so delujoče in to lahko potrdimo s poskusnim zagonom. Odstranitev naprav je v breme kupca.

Stanje: zelo dobro (rabljeno), 3D Systems Model: DT60 Build volume: 600 x 450 x 450 mm External dimensions: 1265 x 780 x 1725 mm Z-axis precision: 1.25 micron X and Y-axis precision: 7.5 micron Max. extruder temperature: 500 ºC Max. build chamber temperature: 120 ºC Nozzle diameter: 0.6 mm Additional available nozzle diameters: 0.2 / 0.4 / 0.8 / 1 / 1.2 mm Thermal barrier made from titanium Two independent extruders Heated filament supply 4 Print Modes: SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum power consumption: 3 kW/h 7” LCD touchscreen Remote monitoring capability Industry 4.0 ready: WiFi, Ethernet, HotSpot, USB MMS System - Modular Maintenance System Dual filament loading Automatic filament changeover Heated feeder Jam detection Filament end detection sensor Print recovery system Liquid cooling Double hardened glass Base fixed by vacuum Nedezd Tugopfx Abrslc High print speed Encoder-controlled positioning Condition: used Scope of delivery: (see pictures) (Sale ex location!) (Technical data subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Desktop Metal 3D Printer Complete System We are offering you a complete Desktop Metal 3D printer system. Desktop Metal Studio System 3D Metal Printer Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder, and furnace Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office-friendly X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing and enables new features such as the use of closed-cell infill for lightweight strength. 1.2 Desktop Metal Studio Debinder (debinding machine) Fully automatic debinding Cleaning tank: 17.4 L (in-process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it does not require external ventilation and is safe for office environments. Automatic liquid distillation and recycling mean there is no need to refill between cycles. Njdpfezd Tllex Abrjlc 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305 x 205 x 205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating capacity: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through a standard office door, the furnace offers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure even heating and cooling without the residual stresses typical of laser-based systems. Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Arburg Model: Arburg Freeformer 300-3X Additive manufacturing of complex functional components With high-temperature option The new, large freeformer 300-3X processes three components using the ARBURG Plastic Freeforming (AKF) process, enabling—for the first time worldwide—the industrial additive manufacturing of complex functional parts with robust hard-soft material bonding and support structure. The designation 300 refers to the available build platform in square centimeters. Compared to the freeformer 200-3X, the build chamber now provides 50 percent more space for parts with dimensions up to 234 x 134 x 230 millimeters. “3X” stands for the three axes (x, y, and z) on which the build platform can move. About additive manufacturing: Manufacturer: Arburg Build volume [cm³]: 7,211 Build area X [mm]: 234 Build area Y [mm]: 134 Build area Z [mm]: 230 Print materials: ABS, PC, PLA Category: Industrial Operating voltage: 400 / 400 V 3~50 Hz Control voltage: 24V DC Total rated current: 11 A Total connection load: 7.8 kW Year of manufacture: 2019 Operating hours: 1,483 Weight: 1,593 kg Nlodozd Tiwepfx Abrec Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in the technical data. All information is without guarantee!) For further questions please do not hesitate to contact us by phone.

Stanje: zelo dobro (rabljeno), Stratasys Type: Stratasys 3D Printer PolyJet Printer J750 Objet Stratasys 3D Printer The Stratasys J750 3D printers enable you to optimize and streamline the process of producing models from various materials on a single build platform within one print job. During the design phase, the J750 3D printer (with CAD software) allows you to assign colors to specific model components. The model can then be saved as a VRML file and printed in the desired colors. The Stratasys J750 3D printer offers a build volume of 490 mm × 390 mm × 200 mm (19.3 × 15.35 × 7.8 in). Power Connection: 100–120 VAC, 50–60 Hz, 13.5 A, 1-phase Or 220–240 VAC, 50–60 Hz, 7 A, 1-phase Materials: - Agilus30 family - Digital ABS Plus - Tango - Transparent - Vero family - Veroflex - VeroUltra Opaque Nlodpfozd Tf Eex Abrec - SUP705, SUP706 support material Applications: - Rapid prototyping - Concept models - Medical models - Tools and fixtures - Full-color textures Total print time on the machine is approx. 1483 hrs. Condition: used Scope of delivery: (see photo) (Technical data subject to change and possible error!) Should you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), German RepRap 3D Printer We are offering you a German RepRap 3D printer. The X1000 by German RepRap is a large-format 3D printer capable of producing industrial-quality objects. 3D Printer Specifications: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standard materials (PLA, ABS, PP ...) Technology: Fused Deposition Modeling (FDM/FFF) Pre-assembled: n.a. Dimensions: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm Minimum layer thickness: n.a. Print speed: 150 mm/s XY Precision: 20 µm Max. build volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power supply: n.a. Additional features: Touchscreen Type: German RepRap X1000 Condition: used Scope of delivery: (See images) Nodpozd Td Uefx Abrjlc (Technical data subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 957 h, vrsta vhodnega toka: trifazni, skupna masa: 600 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, laserska moč: 30 W, dolžina podajanja os X: 200 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 330 mm, največja hitrost vožnje: 20 mm/min, EOS Formiga P110 Velocis Complete System – incl. peripherals & accessories For sale is a high-performance and proven EOS Formiga P110 Velocis system for industrial 3D printing using the SLS process (Selective Laser Sintering). _____ Machine details: • Model: EOS Formiga P110 Velocis • Year of manufacture: 2019 • Operating hours: only 957 h • Process: Selective Laser Sintering (SLS) • Condition: very good, fully functional • Accessories and peripherals: all original EOS components _____ Technical specifications: • Build volume: 200 x 250 x 330 mm (X x Y x Z) • Laser: CO₂ laser, 30 W • Layer thickness: 0.06 – 0.12 mm • Build speed: up to 20 mm/h (z-axis, material-dependent) • Materials: PA12, PA11, TPU, and other SLS-suitable polymers • Power supply: 400 V, 3~ / 50 Hz • Compressed air: required Njdsy El Anopfx Abrelc • Software: EOSPRINT / Material Management System • Machine weight: approx. 600 kg _____ Scope of supply (complete system): • EOS Formiga P110 Velocis • Unpacking station and sieving station P1/P3 • Mixing station P1 for recycled powder (material preparation for economical operation) • Sandblasting cabin by Leering, type DI-12 (for professional post-processing) • Ruwac vacuum unit, type WS 200H Zone 22 explosion-proof (for safe handling of plastic powder) • 4x material containers • 2x build containers _____ Key highlights: • Very low operating hours (only 957 h) → virtually as new • Complete, ready-to-use SLS system • High productivity thanks to Velocis technology • Closed material loop → reduced material costs • Industrial standard – ideal for professional applications • All accessories original EOS → perfect system integration _____ Fields of application: • Prototyping • Small series production • Spare parts & customized components If you have any questions or need more information, please send us a message or give us a call. A viewing appointment can also be arranged after prior agreement.

Stanje: zelo dobro (rabljeno), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer features a large build volume, allowing for the production of large models without prior sectioning. Additionally, the large base area increases productivity when printing many small models in a single print run. This is a 3D color printer with impressive productivity and color accuracy. The ProJet ColorJet color 3D printers from “3D Systems”—also known as ZPrinter—use ColorJet CJP ‘binder jetting’ technology, printing layer-by-layer directly in a powder bed. As a result, even for complex and detailed prints, these 3D printers do not require dedicated support structures. The unfused powder supports the components during printing and is then semi-automatically recycled. Areas of application include: communication of form and design, installation analysis, initial functional testing, variant trials, form development, design, research & development, marketing, sales, master patterns for thermoforming, dental models, presentations, and more... This is the best ColorJet 3D color printer in its class for applications with the highest demands, setting new standards in full-color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Nlodpfjzdyxrsx Abroc Build envelope: 254 x 381 x 203 mm Colors: 390,000 colors (5 print heads including black) Resolution: 600 x 540 dpi Minimum feature size: 0.1 mm Automation: Fully automated (including automated setup and self-monitoring, automated powder loading, automated recycling and removal of powder, snap-in binder cartridges, intuitive control panel) Vertical build speed: 28 mm/hour Material options: High-performance composite material Layer thickness: 0.089–0.102 mm Number of jets: 1,520 Details: ZPrinter ProJet 660 Pro 3D Printer Supported file formats: STL, VRML, PLY, 3DS, ZPR Machine dimensions: 188 x 74 x 145 cm Machine weight: 340 kg Power requirements: 100–240 V, 1.5–7.5 A Workstation compatibility: Windows® 7, Windows® XP Professional, and Windows Vista® Business/Ultimate Regulatory compliance: CE, CSA Special setup requirements: None Type: ProJet 660 Pro 3D Printer Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in technical data. All specifications are subject to change.) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Eos EOSINT Plastic Laser Sintering System We are offering an Eos EOSINT Plastic Laser Sintering System. Model: Eos EOSINT P380 The following components are included with the EOS P380 system: - Build chamber container - Powder container - Overflow container - Cooler: Termo TEK Thermochiller, Type: 802-18644-3 - Unpacking piston - Removal trolley - 3DM 8-zone process chamber heating, 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin - Build volume: 350 mm x 350 mm x 610 mm - Voltage: 3/N/PE/400V AC - Frequency: 50 Hz - Connected load: 8 kW - Fuse protection: 32 A - Max. laser power: 100 W - Laser safety class (open): 4 - Laser safety class (closed): 1 - Weight: 850 kg - Type: EOSINT P 380 - Condition: used Nljdpfezdywzsx Abroc Scope of supply: (see image) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.