Optimum Umenja nakup rabljenega (639)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0518100425, višina središča: 260 mm, širina na sredini: 2.000 mm, največja hitrost vretena: 2.000 obr/min, širina postelje: 220 mm, vrsta upravljanja: ročni, TEHNIČNI PODATKI Višina konic: 260 mm Premer struženja nad posteljo: 460 mm Razdalja med konicama: 2.000 mm Širina postelje: 220 mm Premer vretena: 82 mm Območje vrtljajev vretena: 25 - 2.000 obr/min PODROBNOSTI O STROJU Upravljanje: konvencionalno Mere in teža Mere (D x Š x V): 3.350 x 1.000 x 1.530 mm Neto teža: 3.000 kg Transportni paketi: 1 kos Bwjdpfey Hicuox Agtel OPREMA Hitromenjalni nosilec Tročeljustna glava Digitalni prikaz: SINO SDS6-3V

Stanje: dober (rabljeno), Leto izdelave: 2009, Interna št. artikla: 26044 Univerzalni rezkalni stroj Optimum UF 100 Leto izdelave: 2009 + 3-osni digitalni prikaz Vpenjalo vretena: SK40 Število obratov: 45 - 1660 obr/min Miza: 1120 x 260 mm Hodi: X 625 / Y 220 / Z 430 mm Bedpoy H D N Njfx Agtswl Mere (D x Š x V): 200 x 200 x 170 cm Teža: pribl. 1500 kg Stroj je popolnoma funkcionalen in ga je po dogovoru mogoče pod napetostjo ogledati na več kot 500 m² ogrevane skladiščne površine.

Stanje: rabljeno, Leto izdelave: 2002, Vrtalna zmogljivost 25 mm, vpenjanje vretena MK 3 Lokacija: Nattheim Bwsdpfx Aovvi Auogtel

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Proizvajalec: OPTIMUM Maschinen Germany GmbH Model: F 150 Tip stroja: 3-osni CNC obdelovalni center Bedpfsy Ia Uwex Agtswl Serijska številka: 1521211505 Leto izdelave: 2015 Krmiljenje: Siemens Sinumerik 828D Pomik osi X/Y/Z: pribl. 750 / 500 / 500 mm Vpenjanje orodja: BT40 Moč vretena: 12 kW Moč S1: 9 kW Skupna moč: 25 kW Napajanje: 400 V / 50 Hz Delovna miza s T-utori: pribl. 800 × 450 mm Oprema: - Integriran menjalec orodij - Integriran transporter odrezkov Teža stroja: pribl. 3.520 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Proizvajalec: Optimum Maschinen Germany GmbH Model: L34HS Serijska številka (SN): 11261804002 Tip stroja: CNC stružnica s plosko posteljo Leto izdelave: 2018 Bodsy Ia Uqopfx Agtjwl Moč motorja: 3,7 kW Napajanje: 400 V / 50 Hz Območje vrtljajev vretena: pribl. 30 – 3500 vrt/min Maksimalna hitrost vretena: 3500 vrt/min Maksimalni premer struženja: pribl. 350 mm Premer struženja nad suportom: pribl. 146 mm Razdalja med konicami: pribl. 600 mm Pomik osi X/Y/Z: pribl. 185 / 185 / 540 mm Kužel / vpenjanje: MK 3 Teža: pribl. 1200 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 30 mm, hitrost vretena (min.): 40 obr/min, potovalna razdalja osi X: 145 mm, pomik po osi Z: 465 mm, največja hitrost vrtenja: 4.000 obr/min, širina na sredini: 650 mm, višina središča: 150 mm, nosilnost: 1.200 kg, globina grla: 4.000 mm, For sale is an as-new CNC lathe from the brand OPTIMUM, model OPTIturn L28HS. The machine is in like-new condition, originating from a vocational training institute (BFI), and was used exclusively for training purposes (setup and program transfer). Technical data: Control: Siemens Sinumerik 808D Advanced Year of manufacture: 2019 First commissioning: 2021 Center height: 150 mm Distance between centers: 650 mm Swing diameter over bed: 300 mm Swing diameter over cross slide: 200 mm Speed range: 40–4,000 rpm Spindle mount: Iso 702-1 No.3 – Type A2 Spindle bore: 32 mm Spindle motor power: 2.2 kW Spindle torque: 28 Nm Tool turret: 8 stations Tool holder: VDI 20 X-axis travel: 145 mm Z-axis travel: 465 mm Tailstock taper: MT2 Quill stroke: 80 mm Required installation space: 1,655 x 1,485 x 1,955 mm Note: The machine hours can be read out on site if you have the necessary knowledge. Since the machine was only used for training purposes, very low operating hours can be expected. Tools and tool holders are not included in the offer. Transport and loading can be organized Europe-wide upon request, subject to additional costs. Prices are plus VAT. Inspection available by appointment. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Bwedsy D Hkqjpfx Agtsl Are you looking for a high-quality yet affordable metalworking machine for your production, or do you want to sell one? For further information or to get in touch, visit our website.

Stanje: dober (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 3010164, Ponudba 25462 Tehnični podatki: - Zmogljivost vrtanja v ST 37 do 32 mm - Vpenjalo vrtalne vretena z navojem za izvleko M 12 / MK 3 - Število vrtljajev vretena 120 do 1600 obr/min - Vrtalna enota nastavljiva po višini z ročnim ročajem Bsdpfsy Nabajx Agtewl - Večja razdalja miza / vreteno 650 mm - Hodi vretena z fino podajanjem prek ročnega kolesa 130 mm - Izmet vretena 205 mm - Vrtalno-rezalna enota vrtljiva za 360° - Koordinatna miza s 3 T-utorji 730 x 210 mm - Pomik mize X-os 250 mm / Y-os 200 mm - Pogon 400 V / 1,5 kW - Potrebni prostor cca. Š 1150 x V 1100 x G 1100 mm - Teža cca. 270 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Bandsaw, semi-automatic saw, metal saw, metal bandsaw, frame metal saw Toptech / Optimum GB 4240, used machine Manufacturer: Toptech / Optimum Model: GB 4240 Year/month of manufacture: 2013/06 Dimensions: 2200 x 1100 x 2000 mm Bsdpsm Akwzofx Agtswl Electrical specifications: 400 V / 50 Hz / 4 kW Blade size: 34 x 1.1 x 4320 mm Blade speed: 19-86 m/min - Hydraulic vice - Adjustable feed Material capacity: 400 x 400 mm

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20221346, vhodna napetost: 400 V, Tih tek podaje Težka litana izvedba Bwedpfx Agjyx S Dfstsl Visoka natančnost rezanja zaradi brezvibracijskega teka Ležajno vodilo žaginega traku EMV razred C2 Dvo-kanalna varnostna veriga s hitrim zaustavljanjem v sili Ščetka za ostružke Mikrostikalo za samodejno končno stikalo Gumb – ročni zagon žaginega traku – ročica vklopi in izklopi žagin trak Serijsko z visokokakovostnim bimetalnim žaginim trakom Materialni omejevalnik z lestvico Hitrovpenjalni primež nastavljiv z ročnim kolesom. Vpenjanje obdelovanca s priročno vzvodno hitro zaponko Stabilno stojalo stroja Končna omejevala nastavljiva za stopinje Brezstopenjsko nastavljiva hitrost žaginega traku 15–90 m/min Dvojni poševni rez Obračalna miza: Vsak kot med 45° in -60° je mogoče rezati, saj se žagarska reža vrti skupaj z roko žage

Stanje: rabljeno, Leto izdelave: 2016, Rezkalni stroji Pomik po osi X: 760 mm Pomik po osi Y: 430 mm Pomik po osi Z: 460 mm Število osi: 3 Rezkalni stroj / Obdelovalni center Krmiljenje: Siemens Sinumerik 828D CNC Vpenjanje vretena: SK40 Hitrost vretena: 10000 min⁻¹ Območje vrtljajev od: 10 min⁻¹ Območje vrtljajev do: 10000 min⁻¹ Velikost mize X: 900 mm Bedpfx Agsyqxy Aetowl Velikost mize Y: 410 mm Največja teža obdelovanca: 350 kg Menjalec orodij: 24-pozicijski Pogonska moč: 12 kW Podajalna hitrost: 10000 mm/min Krmiljenje Siemens Hlajenje orodja skozi vreteno: 30 barov Renishaw tipalo

Stanje: dober (rabljeno), Leto izdelave: 2017, dolžina podajanja os X: 550 mm, dolžina pomika po osi Y: 305 mm, dolžina podajanja os Z: 460 mm, CNC X-os: 550 mm Y-os: 305 mm Z-os: 460 mm BT 40 vpenjalo za orodja 12-pozicijski menjalec orodij Glavno vreteno 4 kW do 10.000 min⁻¹ z hladilno napravo Transporter za odrezke Krmiljenje Siemens Sinumerik 808 D Bsdpfsxpqhzex Agtewl

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, S 3-osnim digitalnim prikazovalnikom Leto izdelave: 2015 Premer vretena: 54 mm Razdalja med konicami: 1000 mm Višina konic: 200 mm Območje vrtljajev: 30 – 3000 vrt/min, brezstopenjsko nastavljanje z prikazom na zaslonu Z naslednjo opremo: Bwjdpfx Asyybxnogtjl Nosilec orodij Multifix Naprav za hlajenje Tročeljustna vpenjalna glava Ø 200 mm Štirročeljustna vpenjalna glava Ø 250 mm Vpenjalna glava z vpenjalnimi tulecami do Ø 32 mm Zaščita vpenjalne glave Zaščita proti ostružkom z osvetlitvijo Fiksna lineta Ø cca 150 mm Premična lineta Ø cca 100 mm 4 kos nastavljivih strojevih nog 1 kos premična centrirna konica Navodila za uporabo

Stanje: novo, Priložnost: stekleni moduli iz švicarske razgradnje, 96 steklenih modulov Bwodpeyxth Ssfx Agtel

Stanje: rabljeno, Vrtalna zmogljivost v jeklo (premer) 28 mm Izlet 200 mm Vrtalni hod 105 mm Vpenjalni stožec vretena MK 3 Število vrtljajev vretena 12 Hitrost vretena: 35–5600 obr/min Bwsdpfx Ajfbh Akegtjl Premer stebra 92 mm Velikost mize 340 x 360 mm Miza vrtljiva 360° Skupna potrebna moč 1,5 kW Teža stroja cca. 170 kg Potrebni prostor približno 750 x 500 x 1800 mm Zobata letev je ukrivljena Hladilni sistem ni popoln, črpalka je prisotna V osnovi deluje

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: 152121150, Pomiki osi X/Y/Z pribl. 750/500/500 mm, vpenjalo BT 40, moč: 12 kW, s krmiljenjem SIEMENS, Sinumerik 828D, integriran menjalec orodja, integriran transporter ostružkov, T-utorna vpenjalna miza pribl. 80x45 cm. Bwjdpfx Asyztdxjgtel

Leto izdelave: 2018, stanje: rabljeno, številka stroja/vozila: 11261804002, Premer struženja nad prečnim sani približno 146 mm; razdalja med konicama približno 600 mm, premer struženja približno 350 mm, maksimalno število vrtljajev vretena približno 3.500 vrt/min, minimalno število vrtljajev vretena: približno 30 - 3.500 vrt/min, pomik v oseh X/Y/Z približno 185/185/540 mm, vpenjanje: MK 3 Bsdeyztdrepfx Agtswl

Stanje: novo, Precizni stružnica z vodilno in vlečno vreteno Znamka: OPTiturn Model: TM 4010 D Art.-št.: 3403045 Stanje: Nov stroj Višina konice: 200 mm Razdalja med konicama: 1.000 mm Hitrost vretena: 70 - 2.000 min⁻¹ (8 stopenj) Standardna oprema: - 3-osni digitalni prikazovalnik DPA 31 PLUS - Podnožje stroja - Trivrateno vpenjalo 200 mm - LED strojna svetilka - Redukcijska puša MK 4/MK 6 - Fiksna centrirna konica MK 4 - Fiksna luneta - Gibljiva luneta - Nosilec za hitri menjavalec orodij, osnovni tip E - Nosilec za stružne nože ED Bedpfx Agjilup Notjwl - Pokrov vpenjala, električno zavarovan - Polnjenje z oljem - Orodje za upravljanje - Navodila za uporabo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 1.600 obr/min, potovalna razdalja osi X: 368 mm, pomik po osi Z: 2.900 mm, skupna višina: 1.925 mm, skupna širina: 1.525 mm, skupna masa: 3.820 kg, največja dolžina izdelka: 5.278 mm, število osi: 2, Horizontal lathe from 2022. This Optimum OptiTurn TH 8030D features a maximum turning diameter of 800 mm and a turning length of 250 mm. It is equipped with a robust spindle chuck and a rapid traverse speed of 3,800 mm/min. If you are looking for a high-quality lathe, you should consider the Optimum OptiTurn TH 8030D that we are offering for sale. Contact us for further details regarding this machine. • Type and Highlights • Lead and feed screw lathe, offering high flexibility, precision, and efficiency • Prepared for digital position indicator (see optional equipment) and quick-change tool post (see optional equipment) • Shipping Information • Packaging dimensions: Length 4,770 mm, Width 1,150 mm, Height 1,840 mm • Weights: Gross 4,480 kg, Net 3,870 kg • Technical Data • Load capacity: 1.4 t/m • Working areas: - Max. height: 400 mm - Swing over bed: 800 mm - Swing over cross slide: 570 mm - Bed width: 400 mm - Max. width: 3,050 mm - Swing in bed gap: 1,035 mm - Turning length in bed gap: 250 mm • Spindle speed range: - Number of speeds: 16 • Rapid traverse: - Rapid traverse speed: 3,800 mm/min - Max. duration of rapid traverse: 5 min (30 min. pause) • Electrical Data: - Drive motor rating: 11 kW Bsdpeyxncdofx Agtewl - Supply voltage: 400 V - Mains frequency: 50 Hz - Electrical connections: Total rated value 12 kW • Coolant System: - Coolant pump capacity: 150 W • Spindle: - Spindle chuck: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar capacity diameter: 105 mm - Spindle taper Ø113 (taper 1:20) mm • Tool holder: max. clamping height 32 mm • Tailstock: - Tailstock taper: MK 5 - Tailstock quill stroke: 235 mm - Tailstock quill diameter: 90 mm • Thread cutting: - Metric thread pitch mm/rev (54 pitches) - Inch thread pitch 80 - 7/16 TPI (60 pitches) - Diametral pitch 7/8 - 160 (42 pitches) - Modular pitch 0.25 - 60 mm/rev (46 pitches) • Travel: - Top slide travel: 230 mm - Saddle travel: 2,900 mm - Cross slide travel: 368 mm • Feed: - Longitudinal feed range: 0.044 - 1.48 mm/rev (25 feeds) - Cross feed range: 0.022 - 0.74 mm/rev (25 feeds) • Build Features and Safety - Hardened and ground Z-axis guideways - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Precisely machined saddle; all guides adjustable via gib strips - Top slide swivel range ± 90° - Guaranteed spindle nose run-out accuracy better than 0.015 mm - Shafts, gears, and main spindle run in oil bath - Gears smooth, hardened, and ground with 2 adjustable precision tapered roller bearings - User-friendly lever for feed rate adjustment - Enclosed rapid traverse gearbox - Gears and shafts hardened and ground, running in oil-bath in precision bearings - Handwheels decoupled and tested to EN 23125 - Dual-channel right-left switch, tested to EN 23125 - Switches with lifecycle calculation, tested to EN ISO 13849 - Right/left travel engaged via control shaft at the carriage - Central lubrication at the carriage - Coolant system with separate tank, level indicator, and oil separator; easy and complete drainage and cleaning per DIN - Lead screw drive - Emergency stop mushroom switch, motor protection switch, lockable main switch

Leto izdelave: 2022, stanje: novo, Motor power: 1.1 kW / 230 V Cutting range: 100 mm x 145 mm Feed: infinitely variable Saw blade speed: 22 / 31 / 55 m/min Bsdpfx Agogulr Astswl Saw blade dimensions: 1638 x 13 x 0.65 mm Cutting angle: -45° to 60° Dimensions: 1085 mm x 498 mm x 978 mm Weight: 78 kg

Leto izdelave: 2025, stanje: novo, Motor power: 1.1 kW / 400 V Cutting capacity: 100 mm x 145 mm Coolant system: Yes Feed: infinitely variable Saw band speed: 45 / 90 m/min Bwodpfx Agjha Nz Uetel Saw band dimensions: 2480 x 27 x 0.9 mm Cutting angle: 0° to 60° Dimensions: 1400 mm x 685 mm x 1235 mm Weight: 185 kg

Stanje: novo, Leto izdelave: 2021, Optimill MB 4PV Drilling and Milling Machine including Accessories (New, Unused Condition): Including Accessories: - Set of 20 Packing Plates - RTE 165 Dividing Table - SPW 12 Clamping Tool Kit (58 pieces) - 4x SE55 Leveling Feet with Vibration Dampers - Collet Chuck Set MK4/M16 ER32 3-20 mm Heavy, solid cast-iron construction High smoothness of operation due to ground, oil-bath lubricated gearbox gears Clockwise/anticlockwise rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed for the X-axis Coolant system Machine lamp Gear head swivels ±45° Substantial dovetail guide on the column, hand-scraped, for maximum stability and highest precision Bwjdpfx Aeyxyivsgtel Height-adjustable, large protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling/thread cutting function Substantial and large cross table, precisely surface-machined with T-slots and adjustable gib strips Heavy cast-iron machine stand with chip tray Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 rpm via 2 infinitely variable speeds SINAMICS V20 inverter by SIEMENS Dimensions and Weights: Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling-Milling Head: Drilling-milling head tilt range ± 45 ° Drilling-Milling Capacity: Max. face mill size: 63 mm Max. shank cutter size: 26 mm Drilling capacity (steel, S235JR): 24 mm Continuous drilling capacity (steel, S235JR): 20 mm Electrical Data: Drive motor output: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Horizontal milling table: Length: 800 mm Width: 240 mm Vertical spindle - milling table max. distance: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Coolant system: Coolant pump drive power: 100 W Standards and Approvals: Standard: DIN EN 55011 EMC class: C2 Travel: X-axis, manual: 560 mm Y-axis, manual: 195 mm Z-axis, manual: 350 mm X-axis, automatic: 480 mm Vertical spindle: Throat: 258 mm Spindle taper: MK 4 Speed range: 60 – 2,760 rpm Number of speed ranges: 2 Speed control: electronic Drawbar: M 16 Quill diameter: 75 mm Quill stroke: 120 mm

Stanje: novo, Leto izdelave: 2021, Optimum CNC Milling Machine OPTImill F 105 CNC Sinumerik 808D ADVANCE with Accessories (New, Unused Condition): Including accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Set, 58-piece - Hydraulic Milling Vise HCV 105 - 20 liters of Cutting & Drilling Emulsion AQUACUT C1 - 4th Axis Prepared - Carousel Tool Changer with 12 tool stations - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - SIEMENS servo drive on all axes (closed-loop control) - Max spindle speed 10,000 rpm - Machine light in working area - Portable electronic handwheel with enable button and emergency stop switch - Coolant system with 120-liter coolant tank - Tool changing automatic or via push button (electropneumatic tool clamping device) Dimensions and weights: Length approx. 2164 mm Width/Depth approx. 1860 mm Height approx. 2200 mm Weight approx. 2800 kg Drilling & milling performance: Max face mill diameter 70 mm Max end mill diameter 35 mm Rapid traverse speed: X axis 15,000 mm/min Y axis 15,000 mm/min Z axis 15,000 mm/min Electrical data: Connection voltage 400 V Mains frequency 50 Hz Electrical connection: Total connected load 15 kVA Horizontal milling table: Length 800 mm Width 320 mm Distance vertical spindle – table min. 100 mm Distance vertical spindle – table max. 600 mm T-slot size 14 mm T-slot quantity 3 T-slot spacing 100 mm Max. table load 300 kg Accuracy: Repeatability ± 0.008 mm Positioning accuracy ± 0.008 mm Coolant system: Coolant pump drive power 650 W Tank capacity 120 l Pneumatic connection: Operating pressure 7 bar Travel paths: X axis automatic 550 mm Y axis automatic 305 mm Z axis automatic 460 mm Vertical spindle: Spindle taper BT 40 Speed range 10 – 10,000 rpm Continuous motor power S1 7.5 kW Bodoyxyhfspfx Agtewl Motor power S6-30% operation 11 kW Motor torque S1 48 Nm Motor torque 30% duty S6 70 Nm Feed motor torque: X axis S1 8 Nm Y axis S1 8 Nm Z axis S1 11 Nm Tool changer: Design: Carousel Number of tool positions: 12 tools Max tool diameter 70 mm Max tool length 300 mm Max tool weight 6 kg Tool change time tool-to-tool (T to T) 7 s CNC Tool Starter Set BT 40: - 1 pc. face mill holder, mount 27 mm - 1 pc. keyless drill chuck 1.5 – 16 mm - 2 pcs each of Weldon 6 mm / 20 mm - 1 pc. each of Weldon 8 mm / 10 mm / 12 mm / 16 mm - 1 pc. adapter BT 40 to MK 3 - 4 pcs. collet holders ER 32 - 1 pc. collet wrench ER 32 - 18-piece collet set ER 32 - 1 pc. height setting device - 1 pc. assembly and tooling aid - 15 pcs. pull studs Hydraulic Milling Vise HCV 105: - Sturdy construction for milling - Guideways hardened and ground - Booster system: low force input, high clamping force during operation - Wide clamping range due to locking pin with various hole spacings - Manufactured from high-quality stainless steel - Long service life due to high quality - High clamping force Jaw height 42 mm Jaw width 107 mm Clamping width 170 mm Length without handle 442 mm Overall height 107 mm T-slots 16 mm Clamping force 24.5 kN Clamping pressure 2500 kg Dimensions and weights: Weight approx. 22 kg

Stanje: novo, Leto izdelave: 2025, Heavy, robust cast construction High running smoothness due to ground, oil-bath lubricated gearbox gears Right-/left-hand rotation Automatic quill feed with manual fine adjustment Bwedpfx Ajg U Uv Ujgtjl Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant system Machine lamp Gear head swivels ± 60° Adjustable gib strips Heavy-duty hand-scraped dovetail column guide for maximum stability and precision Height-adjustable, large protective shield with microswitch Drill depth stop Digital position display DRO 5 Drilling / tapping function Heavy, large dimension cross table, precisely surface-machined with T-slots and adjustable gib strips Sturdy cast machine base with chip tray Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 rpm via 2 steplessly adjustable speeds Dimensions and weights Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/milling capacity Max. cutter head size: 63 mm Max. shank cutter size: 26 mm Drilling capacity (steel S235JR): 24 mm Continuous drilling capacity (steel S235JR): 20 mm Electrical data Connection voltage: 230 V Network frequency: 50 Hz Electrical connection Total connected load: 1.5 kW Milling table (horizontal) Length: 800 mm Width: 240 mm Distance vertical spindle – milling table max.: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Standards and approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 560 mm Y-axis manual: 195 mm Z-axis manual: 350 mm X-axis automatic: 480 mm Vertical spindle Reach: 258 mm Spindle mounting: MT 4 Speed range: 60 – 2,760 rpm Number of speed ranges: 2 Speed control: electronic Drawbar: M 16 Swivel range of milling head Z – X plane: ± 45° Quill diameter: 75 mm Quill stroke: 120 mm Location: Available from stock 54634 Bitburg - immediately available -

Stanje: novo, Območje reza pri 90 stopinjah: okroglo 115 mm Bwjdpfjyy A Rfsx Agtol Območje reza pri 90 stopinjah: ravno 100 x 150 mm Mere tračne žage: 1638 x 13 x 0,65 mm Hitrost tračnega lista: 20/29/50 m/min

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC ravnoležiščni stružnica Optimum. Premer obdelave nad ležiščem/vozičkom: 280 mm/170 mm, razdalja med konicama: 700 mm, vreteninska odprtina: 27 mm, hitrost vrtenja: 4000 obr/min, hod X/Z: 165 mm/660 mm, pomik X/Z: 2 m/min/3 m/min, število orodnih mest: 4, hod pinole: 85 mm. Dimenzije stroja X/Y/Z: pribl. 2000 mm/750 mm/1550 mm, teža: pribl. 450 kg, krmiljenje: Siemens Sinumerik. Dokumentacija je na voljo. Možen je ogled na lokaciji. Bwsdjyypliopfx Agtjl