Optimum Dh 32 Gs nakup rabljenega (12.667)

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2016, Funkcionalnost: nefunkcionalno, moč: 2,2 kW (2,99 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, skupna masa: 295 kg, S tem prodajamo našo rabljeno napravo Optimum. Motor ima okvaro na navitju. Napravo si lahko ogledate in prevzamete v Hoppegartnu. Dwodpozxp Nvofx Agfob Brez garancije, brez vračila.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 100 h, OPTIMUM OPTIdrill DH 40 GP – zobniška vrtalna naprava – odlično stanje – malo uporabljena Za prodajo je na voljo visokokakovostna zobniška vrtalna naprava OPTIMUM OPTIdrill DH 40 GP v zelo dobrem stanju. Naprava izvira iz zasebne delavnice in je bila uporabljena le občasno, zato ni naprava za neprekinjeno proizvodnjo. Deluje brezhibno in jo je seveda mogoče pregledati in preizkusiti na licu mesta. Tehnični podatki - Proizvajalec: OPTIMUM - Model: OPTIdrill DH 40 GP - Vrtalna zmogljivost v jeklu: 40 mm - Zobniška vrtalna naprava z mehansko regulacijo hitrosti - Samodejni pomik vretena - Vrtenje v levo/desno - Natančen steber in robustna delovna miza - Vreteno MK4 - Sistem za hlajenje (če je na voljo) - Delovanje na 400 V trifazni tok Stanje - Tehnično brezhibna - V zelo dobrem stanju - Majhno število delovnih ur - Brez potrebe po popravilih - Takoj pripravljena za uporabo Kakovost izdelkov OPTIMUM je znana v strokovnih krogih. DH 40 GP je stabilna, vzdržljiva naprava z visoko natančnostjo. Nova cena: 3.804 Ogled Napravo si lahko ogledate in preizkusite po predhodnem dogovoru. Dwsdpjztl Tmsfx Agfsb Po dogovoru lahko pomagamo pri natovarjanju. Zasebna prodaja, brez garancije ali možnosti vračila.

Stanje: rabljeno, Leto izdelave: 2008, Premer obdelovanca nad strojno mizo: 320 mm Premer obdelovanca nad podpiralom: 190 mm Dolžina obdelovanca: 920 mm Djdpfxszzrdbj Agfewb Višina vretena nad strojno mizo: 160 mm Premer obdelovanca v izbočenem delu: 430 mm Razdalja med centri: 920 mm Širina strojne mize: 181 mm Digitalni prikazovalnik DPA 2000, 3 osi Premer vretena: 38 mm Območje hitrosti vrtenja: 10 - 2.500 vrt/min Moč pogona: 1,5 kW Premer tričeljnega vpenjalnika: 160 mm Stožčasta povezava v vpenjalniku zadnjega konca: MK 3 Premer vpenjalnika: 32 mm Hod vpenjalnika: 100 mm Napetost: 400 V Masa stroja: približno 410 kg Potreben prostor: približno 1,60 x 0,70 x 1,55 m !!! POZOR !!! ODLIČNO STANJE !!! Stroj je iz poklicne šole! - Tovarniška številka: 832432 - Digitalni prikazovalnik DPA 2000, 3 osi - Konstantna hitrost reza - Brezstopenjska regulacija hitrosti - Digitalni prikazovalnik hitrosti - Tričeljni vpenjalnik RÖHM - Plošča: Ø 255 mm - Fiksni vodnik - Gibljivi vodnik - Luč za stroj - Gibljiva centrična konica

Stanje: rabljeno, Leto izdelave: 2017, Zmogljivost vrtanja v jeklo (premer) 40 mm Dwedpfx Ajzpzdajgfsb Izmerjenost 285 mm Hod vretena 160 mm Število vrtljajev vretena 150–2.000 vrt/min Tip vretena MK4 Premer stebra 115 mm Skupna poraba moči 1,5/2,2 kW Masa stroja približno 275 kg Potrebna površina približno 1000 x 700 x 1900 mm

Stanje: rabljeno, Leto izdelave: 2011, Tehnične podrobnosti: Premer vrtanja v jeklu: 35 mm Izstop: 350 mm Hod vretena: 180 mm Rezanje navojev: ST M 24 mm Nastavek vretena: MK4 Število vrtljajev vretena: 50–1450 vrt/min Oddaljenost vretena/mize (maks.): 780 mm Dwsdpfx Ajyli Sfogfeb Ploščina pritrditve mize: 560 x 560 mm Masa stroja (približno): 500 kg Dimenzije stroja (približno Š x G x V): 0,73 x 0,56 x 0,22 m * Robustna, masivna izvedba iz litega jekla * Samodejno mazanje zobnikov s pomočjo oljne črpalke * Visoka gladkost delovanja zahvaljujoč brušenim zobnikom, ki delujejo v oljni kopeli * Visoka natančnost okroglosti zaradi kaljenega in brušenega glavnega vretena * Naprava za rezanje navojev * Zaklenljivo glavno stikalo in stikalo za zaščito motorja * Optidrill B 40GSM dodatno opremljen z avtomatskim podajanjem vretena * Električno upravljanje * 2 hitrosti: 0,1/0,2 mm/vrt * Naprava za hlajenje * Nastavitev globine vrtanja * 18 hitrosti: 50–1.450 min-1 * 9 nastavljivih hitrosti prek prestavne ročice na sprednji strani vrtalne glave

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2026, Optimum 275 N – demonstracijski stroj Model: Opti S 275 N Tehnični podatki: Območje rezanja pri 0 stopinjah (krog): premer 225 mm Območje rezanja pri 0 stopinjah: 245 x 180 mm / pravokotnik Območje rezanja pri 45 stopinjah (krog): premer 160 mm Območje rezanja pri 45 stopinjah: 160 x 160 mm / pravokotnik Območje rezanja pri 60 stopinjah (krog): premer 100 mm Območje rezanja pri 60 stopinjah: 100 x 100 mm / pravokotnik Dviganje žage: ročno Napredovanje: brezstopenjsko nastavljivo Pridržana pravica do sprememb / napak pri vnosu podatkov. Dodjztcydepfx Agfswb

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1990, številka stroja/vozila: CR2431 90-240381, Demag ELKE mostno dvigalo, dvoransko dvigalo, žerjav, stropni žerjav, žerjavna proga Nosilnost / dvižna kapaciteta 3,2 – 3200 kg Tirna širina cca 12.200 mm, zunanja dimenzija cca 12.400 mm Z daljinskim talnim upravljanjem in finim dvigovanjem Dwjdpfx Agszf Upbsfsb Demag DH žični vitel 3200 kg Dvižna višina 6 m Gradbena višina od zgornjega roba dvigala do kljuke cca 1050 mm Dolžina nosilca s tamponom cca 220 cm Dvigalo je demontirano in takoj na voljo V dobrem rabljenem stanju Na voljo so tudi stebrni in stenski vrtljivi žerjavi Sistemi Demag KBK in Abus HB ter Errikla, Hadef, Stahl KT 2000 itd. Možna dostava preko špediterja, prosimo za povpraševanje z navedbo poštne številke Prevzem je zaželen

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Used machine 2009 / Factory-refurbished in 2025 Ideal for collating calendars, folded signatures, all types of cartons, packaging, etc. Calendar Collating Machine Type - MKW RAPID UT - Rotary Table Machine 32 - Number of Stations B3 - Format 35 cm x 50 cm GS - High pile max. 70 cm loading height 1 Collating Automatic Type MKW RAPID UT / B3 / GS - With 32 stations in rotary table configuration - Formats up to 35 x 50 cm - High pile with max. 70 cm stack height - Paper weights up to approximately 1,000 g/m² - Single sheets, folded signatures, carton, plastic films, etc. - Toothed belt conveyor table for continuous paper transport - Radially adjustable toothed belt table for precise sheet positioning - Radial adjustment of toothed belts via electric clutches - Foldable transport pushers - Adjustable suction heads for optimal sheet pick-up - Pressure-vacuum generator in soundproofed housing - Blast air for precise sheet positioning - Electronic machine control via industrial PC - High-quality color display for safe and clear operator guidance - Self-calibrating miss-feed and double-sheet detection per station - Miss-feed and double-sheet detection with IR sensor - Tandem function for dual processing 2:1 (TANDEM mode) - Dynamic station selection for optimized job pre-loading - Insert-change function at any station - Carton-change function at any station - Speed indicator with stepless adjustment - Preset counter with intermediate stop for set number and stop time - Delivery control for shingled output with adjustable set interval - Conveyor table lighting with fluorescent lamps - Jam detection above conveyor table - Ejection station including empty station at delivery AW 3 incl. (for rejection of faulty sets) - Lift control for delivery rollers AHB incl. (for different formats per set and folded sheets) - Delivery jogger system integrated, including delivery jogger ASS i 3 incl. (for standard and shingled output) - Manual feed station on the left side HV 3 incl. (with automatic station control in event of operator error) 1 Pre-stacking Device Type MKW VS 3 - Application as fixed pre-stacking trolleys Dwodpfx Agjxdy R Isfjb - Max. format 35 x 50 cm - 30 fixed stations before the collator - 2 mobile stations before the collator (15+2+15) - 2 movable exchange plates per station 1 High-Pile Non-Stop Delivery Unit Type MKW RAPID TD-3 - High pile delivery up to approx. 30 cm stack capacity - Formats up to 35 x 50 cm - Delivery with offset function - Adjustable stacking function: straight stacking or offset stacking - Adjustable counting function: offset after preset count - Automatic transport on buffer section - Controlled conveyor belt as buffer section, approx. 2.00 m - Plain text display for operation and monitoring Warranty period from delivery of the machines: 12 months manufacturer's warranty for multi-shift operation (excluding wear parts such as rollers, rubber parts, belts, suction heads, transport rollers) Spare Parts Package Extensive spare parts package of all major wear parts included in the scope of delivery Offer Validity Subject to prior sale Detailed offer available on request

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 30 mm, hitrost vretena (min.): 40 obr/min, potovalna razdalja osi X: 145 mm, pomik po osi Z: 465 mm, največja hitrost vrtenja: 4.000 obr/min, širina na sredini: 650 mm, višina središča: 150 mm, nosilnost: 1.200 kg, globina grla: 4.000 mm, For sale is an as-new CNC lathe from the brand OPTIMUM, model OPTIturn L28HS. The machine is in like-new condition, originating from a vocational training institute (BFI), and was used exclusively for training purposes (setup and program transfer). Technical data: Control: Siemens Sinumerik 808D Advanced Year of manufacture: 2019 First commissioning: 2021 Center height: 150 mm Distance between centers: 650 mm Swing diameter over bed: 300 mm Swing diameter over cross slide: 200 mm Speed range: 40–4,000 rpm Spindle mount: Iso 702-1 No.3 – Type A2 Spindle bore: 32 mm Spindle motor power: 2.2 kW Spindle torque: 28 Nm Tool turret: 8 stations Tool holder: VDI 20 X-axis travel: 145 mm Z-axis travel: 465 mm Tailstock taper: MT2 Dedpfx Agey D Hkqjfewb Quill stroke: 80 mm Required installation space: 1,655 x 1,485 x 1,955 mm Note: The machine hours can be read out on site if you have the necessary knowledge. Since the machine was only used for training purposes, very low operating hours can be expected. Tools and tool holders are not included in the offer. Transport and loading can be organized Europe-wide upon request, subject to additional costs. Prices are plus VAT. Inspection available by appointment. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production, or do you want to sell one? For further information or to get in touch, visit our website.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 1.660 obr/min, hitrost vretena (min.): 45 obr/min, skupna višina: 1.700 mm, skupna širina: 1.550 mm, skupna dolžina: 1.760 mm, širina mize: 300 mm, dolžina mize: 1.270 mm, vrsta vhodnega toka: trifazni, skupna masa: 1.450 kg, vhodna napetost: 400 V, teža obdelovanca (maks.): 1.450 kg, razdalja od mize do središča vretena: 646 mm, Oprema: dokumentacija / priročnik, Robustna, univerzalna vrtalno-frezalna strojna oprema z digitalnim prikazovalnikom za merjenje položaja, model DPA 31 Plus. Dwodszy D Ezspfx Agfsb

Stanje: dober (rabljeno), Leto izdelave: 2006, Fina obdelovalna stružnica, stružnica, stružniška miza, vodilno-vlečna stružnica - Proizvajalec: OPTIMUM, vodilno-vlečna stružnica tip D320X920 - Strojna postelja: kaljena - Dolžina struženja: 930 mm - Premer struženja nad posteljo: 320 mm - Premer struženja brez postelje: 500 mm - Premer struženja nad suportom: 180 mm - Vretenasta odprtina: Ø 40 mm - Hitrosti vretena: 65 – 1800 obratov/min Djdpfx Aezd Eqyegfowb - Trije čeljustni vpenjalnik: Ø 160 mm - Konus konjička: MK3 - Pogon: 1,5 kW - Oprema: 2x lunete, Multifix držalo za orodje, glej slike - Dimenzije: 730/1590/V1310 mm - Teža: 525 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Power output: 0.85 / 1.5 kW Speed range: 300 - 4000 rpm Speed settings: stepless Dedpshpmbbefx Agfswb Spindle taper: MK-3 (Morse taper 3) Drilling stroke: approx. 105 mm Spindle reach: 200 mm Weight: 152 kg

Stanje: zelo dobro (rabljeno), 3-axis digital readout Universal “HURON-type” milling machine with swiveling head, 360° orientation 3-axis digital readout Vertical spindle power: 2.2 kW X-axis travel: 600 mm manual / 480 mm automatic Y-axis travel: 270 mm manual Z-axis travel: 380 mm manual / 340 mm automatic Djdpfx Aswlgguegfjwb Feed rate: 24 – 402 mm/min Number of spindle speeds: 11 Spindle speed range: 45 – 1600 rpm Dimensions: 1540 x 1355 x 1650 mm Weight: 1,500 kg

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 Robust drilling machine with powerful OPTIMUM brushless drive. The machine's highlight is the menu-guided operation of the drilling/tapping working modes. - Smooth-running and powerful brushless drive - Optimal power transmission via aluminum belt pulleys combined with toothed GATES quality V-belt - High running smoothness thanks to ground multiple-spline driver - Concentricity accuracy guaranteed to be less than 0.015 mm (measured at the drill quill) - Drill spindle with precision ball bearings - Membrane keypad; dirt- and water-resistant, easy to clean - High-quality OPTIMUM keyless drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined drill table with diagonal T-slots, 360° rotatable - Surrounding coolant channel around the drill table - Large, height-adjustable safety shield with safety switch for maximum operator protection - Drill depth stop - V-belt cover with safety switch - V-belt tensioning mechanism - Solid, large base plate, heavily ribbed on the rear side Technical data: - Column diameter: 60 mm - Dimensions (LxWxH): approx. 552 x 445 x 850 mm - Weight: approx. 64 kg - Drilling capacity, steel: 18 mm - Continuous drilling capacity, steel: 16 mm - Tapping capacity, steel: M10 - Drill table: 230 x 245 mm - Speed range: 100 – 6000 rpm - Number of speed ranges: 5 - Total connected load: 1.5 kW - Supply voltage: 230 V - Quill travel: 65 mm - Spindle taper: MT 2 Dwodpfjw Rhk Rjx Agfsb - Throat: 130 mm - Supplied with keyless drill chuck 1–13 mm - Supplied with machine vice BMP 100 Availability: short-term Storage location: Flörsheim

Stanje: novo, Leto izdelave: 2021, Optimum CNC Milling Machine OPTImill F 105 CNC Sinumerik 808D ADVANCE with Accessories (New, Unused Condition): Including accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Set, 58-piece - Hydraulic Milling Vise HCV 105 - 20 liters of Cutting & Drilling Emulsion AQUACUT C1 - 4th Axis Prepared - Carousel Tool Changer with 12 tool stations - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - SIEMENS servo drive on all axes (closed-loop control) Dwedpoyxyhfsfx Agfsb - Max spindle speed 10,000 rpm - Machine light in working area - Portable electronic handwheel with enable button and emergency stop switch - Coolant system with 120-liter coolant tank - Tool changing automatic or via push button (electropneumatic tool clamping device) Dimensions and weights: Length approx. 2164 mm Width/Depth approx. 1860 mm Height approx. 2200 mm Weight approx. 2800 kg Drilling & milling performance: Max face mill diameter 70 mm Max end mill diameter 35 mm Rapid traverse speed: X axis 15,000 mm/min Y axis 15,000 mm/min Z axis 15,000 mm/min Electrical data: Connection voltage 400 V Mains frequency 50 Hz Electrical connection: Total connected load 15 kVA Horizontal milling table: Length 800 mm Width 320 mm Distance vertical spindle – table min. 100 mm Distance vertical spindle – table max. 600 mm T-slot size 14 mm T-slot quantity 3 T-slot spacing 100 mm Max. table load 300 kg Accuracy: Repeatability ± 0.008 mm Positioning accuracy ± 0.008 mm Coolant system: Coolant pump drive power 650 W Tank capacity 120 l Pneumatic connection: Operating pressure 7 bar Travel paths: X axis automatic 550 mm Y axis automatic 305 mm Z axis automatic 460 mm Vertical spindle: Spindle taper BT 40 Speed range 10 – 10,000 rpm Continuous motor power S1 7.5 kW Motor power S6-30% operation 11 kW Motor torque S1 48 Nm Motor torque 30% duty S6 70 Nm Feed motor torque: X axis S1 8 Nm Y axis S1 8 Nm Z axis S1 11 Nm Tool changer: Design: Carousel Number of tool positions: 12 tools Max tool diameter 70 mm Max tool length 300 mm Max tool weight 6 kg Tool change time tool-to-tool (T to T) 7 s CNC Tool Starter Set BT 40: - 1 pc. face mill holder, mount 27 mm - 1 pc. keyless drill chuck 1.5 – 16 mm - 2 pcs each of Weldon 6 mm / 20 mm - 1 pc. each of Weldon 8 mm / 10 mm / 12 mm / 16 mm - 1 pc. adapter BT 40 to MK 3 - 4 pcs. collet holders ER 32 - 1 pc. collet wrench ER 32 - 18-piece collet set ER 32 - 1 pc. height setting device - 1 pc. assembly and tooling aid - 15 pcs. pull studs Hydraulic Milling Vise HCV 105: - Sturdy construction for milling - Guideways hardened and ground - Booster system: low force input, high clamping force during operation - Wide clamping range due to locking pin with various hole spacings - Manufactured from high-quality stainless steel - Long service life due to high quality - High clamping force Jaw height 42 mm Jaw width 107 mm Clamping width 170 mm Length without handle 442 mm Overall height 107 mm T-slots 16 mm Clamping force 24.5 kN Clamping pressure 2500 kg Dimensions and weights: Weight approx. 22 kg

Stanje: rabljeno, Leto izdelave: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH, signs of use present - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 8 - Precisely machined carriage - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - All guideways adjustable via gib strips - Shafts, gears, and main spindle running in oil bath - Compound slide adjustable range ±90° Dwedpfx Aox Dzxaegfeb - Guaranteed spindle nose run-out accuracy better than 0.015 mm - Gear wheels operate smoothly, are hardened and ground, mounted with 2 adjustable precision taper roller bearings - Clearly arranged selector levers for feed rate selection - Enclosed design of the quick-shift feed gearbox - Gears and shafts are hardened and ground, run in oil bath in precision bearings - Switches with lifecycle calculation, tested to EN ISO 13849 - Bed slide reverse/forward can be switched via shift spindle - Central lubrication on carriage - Leadscrew cover - Emergency stop button, motor protection switch, lockable main switch - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Fast, simple, and tool-free adjustment via clamping lever - Highly ribbed prism bed, induction hardened and precision-ground from cast iron - Coolant system with separate coolant tank, fill level indicator, and oil separator; easy and complete draining and cleaning per DIN - LED work lamp in chip guard - Two gearbox stages - Spindle bore / bar capacity Ø 105 mm - Siemens Sinamics frequency inverter / Safety Integrated - Energy chain for protected cable and hose guidance - Thread dial scale adjustable - Quick-change tool post SWH 7-C - 1 tool holder 32 x 150 Type D for square tool bits 25 mm - Digital position indicator DPA 21 - Glass linear scales Dimensions and Weights Length approx. 3450 mm Width/Depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Ranges Centre height: 280 mm Distance between centres: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in gap: 170 mm Bed width: 350 mm Spindle Speeds Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total connected load: 8.5 kW Supply voltage: 400 V Line frequency: 50 Hz Coolant System Coolant pump output: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. tool holder mounting height: 25 mm Spindle taper: Ø 113 (taper 1:20) mm Thread Cutting Metric pitch: 0.1 – 14 mm/rev Number of metric pitches: 47 Inch pitch: 112 – 2 TPI Number of inch pitches: 60 Diametral pitch: 4 – 112 DP Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module pitches: 34 Feed Travel Top slide travel: 130 mm Cross slide travel: 316 mm Carriage travel: 1710 mm Feed Range Longitudinal feed: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed: 0.014 – 0.784 mm/rev Number of cross feeds: 42

Stanje: rabljeno, Leto izdelave: 2023, Optimum Optiturn TX 5216V – Used Machine. Machine bed made from heavily ribbed cast iron One-piece machine base made from steel High rigidity of the headstock housing thanks to heavily ribbed 25GG cast iron Precisely machined carriage Shafts mounted on needle bearings, all components lubricated in an oil bath Bed guideways hardened and precision ground All electronic controls centrally accessible All feed gearbox gears made of hardened steel Handwheels decoupled and inspected according to EN 23125 Dual-channel safety electronics Switches with life-cycle calculation, tested to EN ISO 13849 Full leadscrew and feed screw cover Fully illuminated work area Service-friendly removable rear panel Dodpjx Hdq Tefx Agfjwb Hardened and ground face plate spindle ensures exceptional accuracy and durability High material removal rate in rough machining thanks to large cutting capacity Energy chain for gentle cable and hose guidance Lockable chip guard travels with the carriage, featuring integrated position indicator and coolant hose, manually adjustable No change gears required Equipped with safety device against simultaneous operation of threading and feed mechanisms Electronic feed stop for the Z-axis Coolant system with separate coolant tank featuring fill level indicator and oil separator; easy and complete emptying and cleaning as per DIN Electrical position shutoff with quadruple position stop Three-jaw chuck included as standard Quick-change tool post SWH 7-C Tool holder 32 x 130 type D for 25 mm square tools Large spindle bore Dimensions and Weights Length approx. 2925 mm Width/Depth approx. 1195 mm Height approx. 1930 mm Weight approx. 2470 kg Work Area Centre height: 260 mm Centre distance: 1600 mm Swing over bed: 520 mm Swing over cross slide: 324 mm Bed width: 350 mm Speed Range Number of speed ranges: 2 x 3 steps Speed range: 12 – 1800 rpm Electrical Data Output (motor power): 7.5 kW Total connected load: 5.5 kW Connection voltage: 400 V Network frequency: 50 Hz Coolant System Coolant pump power: 60 W Type of generated data: Usage data Tailstock Quill taper: MK 5 Quill travel: 180 mm Quill diameter: 72 mm Spindle Spindle mounting: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar pass-through diameter: 80 mm Tool post: SWH 7C Spindle taper: MK 7 Thread Cutting Metric pitch: 0.5 – 15 mm/rev Number of metric pitches: 55 Imperial pitch: 60 – 2 TPI Number of imperial pitches: 55 Diametral pitch: 120 – 4 DP Number of diametral pitches: 55 Module thread pitch: 0.25 – 7.5 mm x π Number of module pitches: 55 Travel Cross slide travel: 170 mm Compound rest travel: 340 mm Carriage travel: 1400 mm Feed Longitudinal feed range: 0.05 – 1.5 mm/rev Number of longitudinal feeds: 55 Flat feed range: 0.025 – 0.75 mm/rev Number of flat feeds: 55

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 240 mm, stružna dolžina: 1.000 mm, premer struženja: 475 mm, izvrtina vretena: 52 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 100 obr/min, moč vretenovega motorja: 11.000 W, skupna višina: 2.025 mm, skupna dolžina: 3.030 mm, skupna širina: 1.952 mm, premer tulec: 65 mm, poteza s peresom: 150 mm, vrsta vhodnega toka: trifazni, skupna masa: 3.000 kg, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, OPTIMUM OPTIturn L440, CNC stružni stroj. Na prodaj je izjemno natančen stroj: OPTIMUM OPTIturn L440 združuje najsodobnejšo CNC-tehnologijo z izjemno robustnostjo. Opremljen z najnovejšo krmilno enoto SIEMENS in servo pogoni SIEMENS, ta stroj zagotavlja maksimalno učinkovitost za zahtevne grobe in finišne obdelave. • Proizvajalec: OPTIMUM • Model: OPTIturn L440 • Stanje: popolnoma delujoč • Lokacija: Graz • SLIKE/VIDEO: Na zahtevo vam z veseljem pošljemo originalne slike in videoposnetke. _____ • Najsodobnejša krmilna enota: Siemens SINUMERIK 828D Basic T s ShopTurn (programiranje delovnih korakov), 3D-simulacijo in zaznavanjem preostale količine materiala. • Največja natančnost: Zagotovljena ponovljivost in natančnost pozicioniranja +/- 0,005 mm zahvaljujoč laserskemu merjenju in visokokakovostnim krogličnim vijačnim pogonom. • Visokohitrostna vretena: Do 4.500 vrt/min (pneumatična, avtomatska menjava med 2 prestavami) za popolno kakovost površine. • Stabilnost in dolgotrajnost: Posebej široko posteljo stroja z utrjenimi in brušenimi dvojnimi pravokotnimi vodili – idealno za težke grobe obdelave. • Varnost: Siemens Safety Integrated omogoča varno nastavitev tudi pri odprtih vratih. _____ Obsežen paket opreme: • Hidravlični rotacijski nastavek za orodja: LS160 VDI40 z 8 mesti za orodja • Hidravlična 3-čeljustna vpenjalna glava: Ø 200 mm (prehodni premer Ø 52 mm), vključno s trdimi in mehkimi vpenjalnimi čeljustmi • Udobje pri upravljanju: Prenosno, elektronsko ročno kolo ter dve fiksno nameščeni ročni kolesi (osi X/Z) na mobilni upravljalni plošči • Upravljanje s hlajenjem: Zaprt omarica z integriranim izmenjevalnikom toplote (ščiti pred umazanijo in pregrevanjem) • Dodatna oprema: Močna enota za hlajenje (55 l/min), halogenska delovna luč, avtomatično mazanje (vreteno in sani), 6 strojnih nog. _____ Tehnični podatki: Maks. dolžina obdelave: 1.000 mm | Višina med centri: 235 mm Premer obdelave nad posteljo: 475 mm | Nad ploščato sani: 240 mm | V mostu postelje: 710 mm Premer vretena: 65 mm | Vpenjalna odprtina: DIN ISO 702-1 št. 6 Število vrtljajev, 1. stopnja: 100 - 950 min⁻¹ (525 Nm) | 2. stopnja: 900 - 4.500 min⁻¹ (382 Nm) Pomik osi X in Z: do 15.000 mm/min Vpenjalna odprtina zadnjega konusa: MK 4 | Pomik konusa: 150 mm | Premer konusa: 65 mm Priključna napetost: 400 V / 3 ~50 Hz | Skupna priključna moč: 20 kW | Pogonski motor: 11 kW Dimenzije: D x Š x V: 3.030 x 1.952 x 2.025 mm | Skupna teža: približno 3.000 kg Dwodpfjvphv Tsx Agfsb Kontakt in ogled: Stroj je v odličnem stanju. Ogled pri vklopljenem stroju je mogoč po predhodnem dogovoru.

Stanje: rabljeno, Leto izdelave: 2011, številka stroja/vozila: 1537111, vrsta vhodnega toka: trifazni, vhodni tok: 30 A, vhodna napetost: 400 V, Tiskalnik EFI VUTEk GS3200 UV za tisk na zvitke, leto proizvodnje 2012, vključno z dvema podaljšanima mizi. Prodaja neposredno od lastnika: belgijski proizvajalec vizualnih komunikacijskih rešitev, ustanovljen leta 1832, ki je del mednarodne skupine in ima certifikate ISO 9001 in ISO 14001. Ta tiskalnik je iz naše lastne proizvodnje. Prodajamo ga, ker se osredotočamo na celovite rešitve v vizualnih komunikacijah in ne zato, ker bi bilo z napravo kaj narobe. STROJ - Tiskalnik EFI VUTEk GS3200 UV - Širina tiskanja do 3,2 m Djdpozvu Nisfx Agfswb - Leto proizvodnje 2012 - Opremljen z 2 podaljšanima mizama STANJE Uporabljen, iz naše lastne proizvodnje. Prodaja se v trenutnem stanju, brez tovarniške garancije. Pred odločitvijo vam bomo povedali natančno stanje in odgovorili na vsa tehnična vprašanja. Dodatne fotografije in tehnične podrobnosti so na voljo na zahtevo. PRAKTIČNO - Dostava iz tovarne, prevzem v Olenu, Belgija - Razstavljanje, transport in namestitev je mogoče urediti po dnevni tarifi - Poslovna prodaja z računom - Plačilo pred prevzemom Za dodatne fotografije, natančne specifikacije ali dogovor o ogledu se obrnite prek tega oglasa.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 278 h, številka stroja/vozila: GS3012C-10395, nosilnost: 227 kg, lastna masa: 1.503 kg, gradbena višina: 1.660 mm, vrsta goriva: električni, skupna dolžina: 1.830 mm, vrsta pogona: Elektro, gradbena širina: 820 mm, delovna višina: 7.800 mm, Škarjasta delovna ploščad Številka šasije: GS3012C-10395 Dodpfxsygn H Dj Agfjwb Stanje: Kot novo Tehnično stanje: zelo dobro

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine is on display. Optimill F 300 HSC Premium CNC milling machine direct from the manufacturer. F 300 HSC – The OPTIMUM premium CNC milling machine equipped with the Siemens SINUMERIK 828D control system stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile rail guides with roller bearings in all axes for high load capacity • High-torque servo drives mounted directly to the ballscrews in all three axes • Precision-ground, preloaded, high-performance ballscrews for rapid traverse speeds in all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with up to 15,000 rpm and inline spindle • Solid, precise milling table with five T-slots, generously dimensioned and precision-ground • Portable electronic handwheel with enabling button and emergency stop button greatly simplifies program setup • Tool changer with double gripper and 30-tool capacity • Coolant system with chip flushing and cleaning pistol • Through-spindle coolant supply at 20 bar • Belt-type chip conveyor for efficient chip removal • Chip trolley • Oil separator • Work area machine lamp • Additional Siemens package: material defect liability and free Online-/On-site-Service OSS Plus • 1-year Basic maintenance contract included in DE/AT/CH • Control system features • 15.6" color display • 16:9 format • Complete package • Safety Integrated • Remnant material detection and processing • ShopMill step programming • Network drive management • 3D simulation • Path tracing • Siemens OSS PLUS add-on package • 12 months; item no. 3589020 • 24 months; item no. 3589021 • 36 months; item no. 3589022 • Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 15,000 rpm • Dimensions and weights • Length approx. 2856 mm • Width/depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg • Rapid traverse speed • X-axis 36 m/min • Y-axis 36 m/min • Z-axis 32 m/min • Electrical data • Connection voltage 400 V • Mains frequency 50 Hz • Electrical connection • Total connected load 30 kVA • Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 18 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg • Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm • Travel • X-axis automatic 1000 mm • Y-axis automatic 620 mm • Z-axis automatic 630 mm • Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 15,000 rpm • Drive motor power S1 continuous operation 20 kW • Drive motor power S6-30% operation 52.4 kW • Drive motor torque S1 continuous operation 96 Nm • Drive motor torque S6 30% operation 250 Nm Dwodpfsymd Epjx Agfob • Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 12.01 kN • Feed motor torque • X-axis continuous operation S1 20 Nm • Y-axis continuous operation S1 20 Nm • Z-axis continuous operation S1 36 Nm • Tool changer • Double arm gripper • Number of tool stations 30 • Max. tool length 300 mm • Max. tool weight 8 kg • Tool-to-tool change time 2.5 s

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is on display. Optimill F110 ECO Premium CNC milling machine directly from the manufacturer. F110 ECO – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D control is distinguished by its performance, speed, precision, and long service life. Model: F110 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling Spindle: Belt Drive Machine Data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 7.5 kW Torque drive motor S1 operation: 45 Nm Drive motor S6 30% operation: 16.2 kW Torque drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Coolant System Coolant pump power: 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Dwsdpfx Asymkbkogfeb Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool to tool: 2.5 seconds Travel Paths X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z axis: 48 / 48 / 32 m/min Motor Torque X / Y / Z axis: 11 Nm / 11 Nm / 20 Nm Feed Forces X / Y / Z axis: 3.67 kN / 3.67 kN / 6.68 kN Speed Range Spindle speeds*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6–8 kg/m³ Milling Table Spindle to table distance: 100–600 mm Table length x width: 800 x 400 mm T-slot size / number / spacing: 18 mm / 3 / 100 mm Maximum load capacity: 400 kg Dimensions Length x width x height: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg Equipment Linear guideways with ball screws for high rapid traverse speeds on all axes Telescopic way covers on all three axes Automatic lubrication Portable electronic handwheel with enabling switch and emergency stop RJ45 port and 230 V power outlet Work light in the machining area Cleaning gun Ball screws and linear guides from THK Chip flushing Cooling at the spindle head (machining area) Electrical cabinet Arm-type tool changer SW24 CE compliant *More options available.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The machine is currently on display. Optimill F 110 HSC Premium CNC Milling Machine, direct from the manufacturer. F 110 HSC – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D Control stands out for its performance, speed, precision, and long service life. · Heavy-duty construction · High productivity · High reliability · Robust, torsion-resistant machine base with strong ribbing · Profile rail with recirculating ball bearings for high rapid traverse speeds in all axes · High-torque servo drives in all three axes · Telescopic way covers on all three axes · Automatic lubrication · Solid, precise milling table with three T-slots, generously dimensioned and precision ground · The portable electronic handwheel with enabling button and emergency stop pushbutton greatly facilitates program setup · Coolant system with chip flush and cleaning gun · Belt-type chip conveyor ensures efficient chip removal · Chip trolley · RJ45 interface and 230 V power connection · Enclosed electrical cabinet with integrated heat exchanger for optimal temperature control and prevention of dust ingress · Machine light in the working area · Additional SIEMENS warranty for material defects and free online/on-site service OSS Plus · 1-year basic maintenance contract included for Germany/Austria/Switzerland Spindle: Inline spindle Machine data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling spindle Drive motor S1 operation: 9 kW Torque, drive motor S1: 57 Nm Drive motor S6-30% operation: 21.2 kW Torque, drive motor S6-30%: 135 Nm Spindle taper: SK 40 / DIN 69871 Optional internal spindle cooling Drive motor S1 operation: 10.5 kW Torque, drive motor S1: 50 Nm Drive motor S6-30% operation: 26.4 kW Torque, drive motor S6-30%: 125 Nm Djdpfeymka Hex Agfowb Cooling lubricant system Coolant pump output (2 units): 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Cleaning pump output: 530 W Milling accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (if adjacent stations are empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 2.5 seconds Travel distances X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed drive Rapid traverse (X, Y, Z): 48 / 48 / 32 m/min Motor torque (X/Y/Z): 11 Nm / 11 Nm / 20 Nm Feed forces X/Y/Z: 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds*: 12,000 rpm Pneumatics Air pressure: 6 bar Air consumption per hour: 6–8 kg/m³ Milling table Spindle-to-table distance: 100–600 mm Table (L x W): 850 x 400 mm T-slot size/quantity/spacing: 18 mm / 3 / 100 mm Max. table load: 400 kg Dimensions L x W x H: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 1.727 h, številka stroja/vozila: GS4607-86926, nosilnost: 317 kg, dvižna višina: 1.175 mm, dolžina platforme: 318 mm, širina platforme: 117 mm, skupna masa: 2.790 kg, lastna masa: 2.791 kg, transportna dolžina: 241 mm, transportna širina: 117 mm, transportna višina: 239 mm, gradbena višina: 239 mm, naslednji pregled (TÜV): 09/2026, vrsta goriva: električni, velikost pnevmatike: 15x5, stanje pnevmatik: 90 odstotek, stanje pogona: 90 odstotek, medosna razdalja: 185 mm, barva: modra, Za prodajo ponujamo eno od naših samohodnih dvigal s škarjastim mehanizmom, ki ima višino dviga 12 metrov in je redno vzdrževano. Zahvaljujoč stalnemu in rednemu vzdrževanju je stroj v odličnem tehničnem stanju. Dwjdpfx Agszp E Shsfsb Cena stroja vključuje sveže kontrolne poročila, pripravljena na ime kupca, prav tako pa vam zagotovimo natančne informacije o stanju akumulatorjev. Natančne in podrobne specifikacije stroja najdete na naši spletni strani.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 1.600 obr/min, potovalna razdalja osi X: 368 mm, pomik po osi Z: 2.900 mm, skupna višina: 1.925 mm, skupna širina: 1.525 mm, skupna masa: 3.820 kg, največja dolžina izdelka: 5.278 mm, število osi: 2, Horizontal lathe from 2022. This Optimum OptiTurn TH 8030D features a maximum turning diameter of 800 mm and a turning length of 250 mm. It is equipped with a robust spindle chuck and a rapid traverse speed of 3,800 mm/min. If you are looking for a high-quality lathe, you should consider the Optimum OptiTurn TH 8030D that we are offering for sale. Contact us for further details regarding this machine. • Type and Highlights • Lead and feed screw lathe, offering high flexibility, precision, and efficiency • Prepared for digital position indicator (see optional equipment) and quick-change tool post (see optional equipment) • Shipping Information • Packaging dimensions: Length 4,770 mm, Width 1,150 mm, Height 1,840 mm • Weights: Gross 4,480 kg, Net 3,870 kg • Technical Data • Load capacity: 1.4 t/m • Working areas: - Max. height: 400 mm - Swing over bed: 800 mm - Swing over cross slide: 570 mm - Bed width: 400 mm - Max. width: 3,050 mm - Swing in bed gap: 1,035 mm - Turning length in bed gap: 250 mm • Spindle speed range: - Number of speeds: 16 • Rapid traverse: Dwedpfoyxncdex Agfeb - Rapid traverse speed: 3,800 mm/min - Max. duration of rapid traverse: 5 min (30 min. pause) • Electrical Data: - Drive motor rating: 11 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - Electrical connections: Total rated value 12 kW • Coolant System: - Coolant pump capacity: 150 W • Spindle: - Spindle chuck: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar capacity diameter: 105 mm - Spindle taper Ø113 (taper 1:20) mm • Tool holder: max. clamping height 32 mm • Tailstock: - Tailstock taper: MK 5 - Tailstock quill stroke: 235 mm - Tailstock quill diameter: 90 mm • Thread cutting: - Metric thread pitch mm/rev (54 pitches) - Inch thread pitch 80 - 7/16 TPI (60 pitches) - Diametral pitch 7/8 - 160 (42 pitches) - Modular pitch 0.25 - 60 mm/rev (46 pitches) • Travel: - Top slide travel: 230 mm - Saddle travel: 2,900 mm - Cross slide travel: 368 mm • Feed: - Longitudinal feed range: 0.044 - 1.48 mm/rev (25 feeds) - Cross feed range: 0.022 - 0.74 mm/rev (25 feeds) • Build Features and Safety - Hardened and ground Z-axis guideways - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Precisely machined saddle; all guides adjustable via gib strips - Top slide swivel range ± 90° - Guaranteed spindle nose run-out accuracy better than 0.015 mm - Shafts, gears, and main spindle run in oil bath - Gears smooth, hardened, and ground with 2 adjustable precision tapered roller bearings - User-friendly lever for feed rate adjustment - Enclosed rapid traverse gearbox - Gears and shafts hardened and ground, running in oil-bath in precision bearings - Handwheels decoupled and tested to EN 23125 - Dual-channel right-left switch, tested to EN 23125 - Switches with lifecycle calculation, tested to EN ISO 13849 - Right/left travel engaged via control shaft at the carriage - Central lubrication at the carriage - Coolant system with separate tank, level indicator, and oil separator; easy and complete drainage and cleaning per DIN - Lead screw drive - Emergency stop mushroom switch, motor protection switch, lockable main switch