Okuma Mac Turn 550 W nakup rabljenega (55.567)

Stanje: dober (rabljeno), Leto izdelave: 2005, Machine was serviced annually under a maintenance contract with Okuma. Dkjdpfx Asyt Nvteplel Okuma Mac Turn 550 W / 9-axis turning-milling center Year of manufacture: 2005 Control: OSP-E 100 L / Expansion kit “M“ Kit One Touch IGF Milling spindle slide X/Y/Z/B Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axis Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y axis: 250 mm / ±125 mm Main spindle speed up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 positions, no driven tool stations Lower turret with steady rest, therefore only 9 stations instead of 12 Self-centering steady rest: 35 – 240 mm Milling spindle with infinitely variable B axis (0.001°) Magazine: 80 positions Tool holder: HSK 100 New Forkhardt three-jaw chuck, Ø 400 mm, valued at €12,000 Sub-spindle currently without chuck, equipped with arbor / delivery without arbor Enlarged main spindle, 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measuring system Additional measurement system for Y axis Maximum tool length: 450 mm instead of 350 mm Door automation for both doors Chip conveyor Gravity band filter with 900-liter clean tank Frequency-controlled supply pump up to 20 bar Machine was serviced annually under a maintenance contract with Okuma. In 2023, the cable track of the W axis, including all hoses, was replaced. In October 2024, linear guides X/Y/Z were renewed. Works carried out by Okuma: - Machine cleaned - Sheet metal covers dismantled - 8th axis removed - Gantry removed and lifted out of the machine. ATC removed and lifted out. - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New ZA linear guide, including carriages, installed and tightened to specified torque - New ZA ball screw, including bearings, installed - Base plate of the gantry installed and tightened to specified torque, or bolted to the carriages. Lubrication lines connected. - ATC including add-on parts installed and connected - New linear guides for YA and XA installed and tightened to the corresponding torques. New YA ball screw with bearings installed - Gantry installed and lubrication lines connected. XA base plate installed and aligned - 8th axis assembled and aligned - H1 turret assembled - Drive motor of the 8th axis installed - 8th axis plus new H1 installed and geometry set - Functional test of 8th axis and H1 - Run-in program for B axis approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and defect report for OEG created - Left door installed, various sheet metals adjusted - Power chuck installed - Zero points adjusted - Tool change checked

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, moč vretenovega motorja: 22.000 W, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 1.670 mm, pomik osi Y: 505 mm, pomik po osi Z: 190 mm, skupna višina: 2.950 mm, skupna širina: 2.960 mm, skupna masa: 13.700 kg, največja dolžina izdelka: 5.110 mm, število osi: 9, This 9-axis Okuma MAC TURN 350-W was manufactured in 2011. It features a maximum turning diameter of 550 mm and a center distance of 1500 mm. The machine is equipped with a powerful main and sub spindle, both reaching a spindle speed of 3,800 rpm and a milling spindle speed of 12,000 rpm. If you are looking for top-quality turning and milling capabilities, consider the Okuma MAC TURN 350-W turn-mill center that we are offering for sale. Please contact us for further details. • Control unit: OKUMA OSP P200L-H • Included control options: Collision Avoidance System (CAS), One Touch IGF, helical interpolation • Distance between centers: 1500 mm • Maximum swing diameter over covers: 550 mm • Maximum turning diameter: 550 mm • Bar capacity: 75 mm • Main spindle: • Attachment: ASA 8" large bore • Sub spindle: • Attachment: ASA 8 Super Big Bore • Speed: 3,800 rpm • Power: 22/15 kW Dedjy Ddiwjpfx Apljkl • Milling spindle: • Taper: HSK A63 • Speed: 12,000 rpm • Power: 11 kW • Tooling: • Tool magazine: 44 positions • Lower turret: 12 positions with live tooling • Axes: • Axis travels: 1670 mm / 1655 mm; 505 mm / 210 mm; 190 mm • B-axis: Continuous 210° • C-axis: 360,000 increments • Coolant/pump pressure: 15 bar • Operating hours (as indicated): • 30870: 8:15 • 13909:49:34 • 6594: 8:59 • 9497:37:03 Additional equipment • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, CNC stružno-frezalni center z 9 CNC osmi, Okuma Mac Turn 350 W, leto izdelave 2004, OSP-E 100L, magazin z 80 mesti, Dodpfx Aoy Atu Tsplskl glavno vreteno s C-osjo, proti-vreteno s C-osjo, Y-osni voziček zgoraj / rezkalno vreteno, vpenjalni sistem HSK 63, brezstopenjska B-os kot rezkalno vreteno, konjska razdalja 1500 mm, vrtina vretena 80 mm, največji premer obdelovanca Ø 550 mm, struženje Ø 350 mm, spodnji revolver 12 pozicij s pogonskimi orodji, Interlite kompaktni filtrirni sistem 900 l, odsesovanje, čas delovanja vretena cca 18.300 h, transporter za ostružke, ročica menjalca orodij popolnoma obnovljena, hladiilni sistem z visokim tlakom, merilna roka za orodja, menjalnik orodja obnovljen, glavno vreteno Kitagawa B - 210, proti-vreteno Kitagawa B - 208,

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Dedpovta Rkofx Aplokl Neff – The Okuma Specialist and NeffBuy Additionally, we are happy to offer you an all-inclusive package: inspection in our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, installation and commissioning of the machine, as well as operator training and subsequent service. We provide Okuma CNC service throughout Europe, both electronically and mechanically. On top of that, we have a 1,200 m² stock of all Okuma spare parts. Please feel free to visit our website for more information.

Stanje: dober (rabljeno), Leto izdelave: 2006, obratovalne ure: 21.437 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 122574, Krmilnik: OSP P200 L Izredno malo delovnih ur vretena. Največji premer struženja: ø 720 mm Razdalja med vpenjalnimi glavami: 2.000 mm Hitrost glavnega vretena: 3.500 min⁻¹ (rpm) Moč glavnega vretena: 30 kW Podvreteno: Hitrost podvretena: 3.800 min⁻¹ (rpm) Moč podvretena: 22 kW Hitrost pogonskega orodja: 5.000 min⁻¹ (rpm) Moč pogonskega orodja: 22 kW Dkedpfx Apeurfz Islsl Število pogonjenih orodij v revolverju: do 12 Zgornje vreteno za rezkanje: HSK100 Avtomatski menjalec orodja (ATC): 32 orodij HSK 100 Y-os: 250 mm (+125 / -125) Tlorisna površina: 6.150 x 3.073 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 20.204 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.025 mm, premer struženja: 530 mm, potovalna razdalja osi X: 475 mm, pomik po osi Z: 1.170 mm, poteza s peresom: 150 mm, model krmilnika: Okuma OSP-E100L, TECHNICAL DETAILS Distance between centers: 1,000 mm Swing over bed: 550 mm Maximum machining diameter: 530 mm Maximum workpiece length: 1,025 mm Axis Travels X-axis: 475 mm Y-axis: ±80 mm Z-axis: 1,170 mm C-axis: 360° (continuous) B-axis indexing angle: 1° Main Spindle Dodjxvzp Aopfx Aplskl Spindle speed: 5,000 rpm Spindle nose: JIS A2-6 Spindle bore diameter: 62 mm Bearing diameter: 100 mm Counter Spindle Spindle speed: 6,000 rpm Spindle nose diameter: 140 mm Spindle bore diameter: 43 mm Bearing diameter: 80 mm Milling Spindle Speed range: 6,000 rpm Feedrates Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 26 m/min Rapid traverse Z-axis: 40 m/min Tool Changer (ATC) Number of tools: 84 Maximum tool length: 250 mm Maximum tool diameter: Ø120 mm (adjacent stations empty) Maximum tool weight: 5 kg MACHINE DETAILS Control system: Okuma OSP-U100L Dimensions (L x W x H): 3,820 × 2,645 × 2,900 mm Weight (without tool magazine): 12,500 kg Total main power-on hours: 20,204 h EQUIPMENT Automatic tool changer system High-speed M-spindle with coolant supply 360° C-axis for continuous machining Robust B-axis with 1° indexing Precision counter spindle for secondary operations Stable turret with ATC system

Leto izdelave: 2006, obratovalne ure: 19.067 h, stanje: rabljeno, skupna dolžina: 5.100 mm, skupna širina: 2.800 mm, skupna višina: 2.900 mm, Color: Grey Unladen weight: 13,700 kg Price: On request Turning and milling center Total: 9 axes, B-axis, Y-axis, C-axis Automatic workpiece feeder with controlled arm by Pneumotec Automatic bar feeder by LNS Quick Load Servo III Sub-spindle VAC-MB11, 4,500 rpm Milling head with automatic tool changer and 44 tool stations Turret: 12 tool stations Chip conveyor - Year of manufacture: 2006 - Documentation available: Yes - CE marking available: Yes Dsdpfxey N Dt He Aplskl - CE certificate available: No - Serial number: 122616 - Operating hours: 19,067 - Control: CNC - Control system brand: OKUMA-OSP - Control system type: - Power [kW]: 22.0 - Swing diameter over bed [mm]: 550 - Center distance [mm]: 1,500 - Spindle bore [mm]: 80 - Options: Turret head, driven tools, bar feeder, 3-jaw chuck, tool magazine, chip conveyor, C-axis └ Tool magazine [pcs]: 44 - X-axis travel [mm]: 500 - Y-axis travel [mm]: 95 - Z-axis travel [mm]: 1,650 - Tool holder: HSK-F63 - Bar loader type: LNS Quick Load Servo III - Transport dimensions: 5,100 mm x 2,800 mm x 2,900 mm (L x W x H) - Transport weight [kg]: 13,700 kg - Number of transport packages: 7 Financial information VAT: The listed price is plus VAT VAT/taxation: VAT is deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Lukas van Rossum

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, OKUMA V-Turn LVT 400 CNC vertikalni stružnica (dvo-strojna celica) Model: LVT 400 Krmiljenje: OKUMA OSP 1000L Letnik: 2006 Revolver za 12 orodij Hi-Power 60 bar visokotlačno hlajenje Transporter odrezkov Merjenje obdelovanca Karuselni sistem, ki povezuje obe stroji s preklopno postajo Dodsxwy S Ejpfx Aplokl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 21.269 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0082, stružna dolžina: 1.500 mm, premer struženja: 580 mm, potovalna razdalja osi X: 598 mm, pomik osi Y: 230 mm, pomik po osi Z: 1.660 mm, TECHNICAL DETAILS Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main spindle Main spindle speed range: 12 - 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Dsdpfx Aoyxmyusplekl Drive power - main spindle: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed rate: 0.001 - 1,000 mm/rev Turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions Driven stations: stepless Speed range - driven tool stations: 40 - 3,000 rpm Tool shank height: 25 mm Boring bar shaft diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Footprint: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating hours Main switch on time: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant system High-pressure coolant 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs) 3-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0082, stružna dolžina: 1.500 mm, premer struženja: 580 mm, potovalna razdalja osi X: 598 mm, pomik osi Y: 230 mm, pomik po osi Z: 1.660 mm, TECHNICAL DETAILS Maximum turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Travel paths X-axis travel: 598 mm Y-axis travel: 230 mm Z-axis travel: 1,660 mm Main spindle Speed range – main spindle: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis: 0.001° Feeds Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 min⁻¹ Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) Driven stations: stepless Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW Dkjdoxb Awfspfx Aplel MACHINE DETAILS Control unit: OSP 7000 L Space and weight Required space approx.: 6.0 x 3.2 x 3.0 m Machine weight approx.: 18.5 t Electrical data Total power requirement: 53 kVA Rated voltage: 400 V Number of phases: 3 Ph Frequency: 50 Hz EQUIPMENT Chip conveyor Central coolant system High-pressure coolant Signal lamp Hydraulic unit Steady rest 3-jaw chuck Schunk – ROTA NC 400-120 Electronic handwheel 44 assorted tool holders

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0014, stružna dolžina: 1.500 mm, premer struženja nad prečnim suportom: 610 mm, potovalna razdalja osi X: 598 mm, pomik osi Y: 230 mm, pomik po osi Z: 1.660 mm, TECHNICAL DETAILS Travel Distances Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm C-axis: 0.001° Turning Length: 1,500 mm Turning Diameter over Cross Slide: 610 mm Turning Diameter: 580 mm Spindle Spindle Motor Power: 30,000 W Spindle Speed (min): 14 rpm Spindle Speed (max): 3,200 rpm Spindle Bore: 90 mm Spindle Bearing Diameter: 130 mm Spindle Nose: JIS A2-11 Dkodjxqyikopfx Aplol Rapid Traverse Rapid Traverse Z-axis: 20 m/min Rapid Traverse X/Y: 12,000 mm/min Rapid Traverse C: 100 min^-1 Feed Rate X/Z/Y: 0.001 - 1,000 mm/rev Tools Tool Magazine Positions: 32 pos. Tool Holder: MAS BT 50 Max. Tool Diameter: 170 mm Max. Tool Length: 350 mm Max. Tool Weight: 20 kg Turret Type: H2 ATC Tool Stations: 2 (1× L-Tool / 1× M-Tool) Driven Tool Stations: stepless Spindle Speed – Driven Tool Stations: 40 – 3,000 rpm Tailstock Quill Diameter: 120 mm Quill Stroke: 170 mm Morse Taper: MK 5 MACHINE DETAILS CNC Control: OSP 7000L Total Connected Load: 53 kVA Dimensions & Weight Dimensions (L x W x H): 5.3 × 3.2 × 3.0 m Machine Weight: 18,500 kg EQUIPMENT Chip conveyor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, CNC stružno-rezalni center Okuma Multus B300II-W Krmilnik: OSP-P 300SA Letnik izdelave: 2022 Interna št. stroja: 55 X-os: 580 mm Y-os z hodom: (+80/-80 mm) 160 mm Z-os: 935 mm B-os: do 225°, pozicioniranje na 0,001° Dkedpfjy Ewy Sox Aplsl W-os: 1.000 mm Obdelovalna dolžina: 900 mm Premer struženja: 630 mm Vpenjanje orodja: HSK A63 Magazin orodij: 40 mest Oprema: - Sistem za nadzor orodij - Naprava za merjenje orodij - ONE touch IGF - Lamelni transportni trak - Rezervoar za hladilno tekočino z vključeno črpalko 20 bar - Priprava za merjenje med procesom - Korekcija višine orodja v Y-osi za stružna orodja - Hi-Cut Pro visoko hitrostni krmilnik

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Okuma Multus B300-W 6-osni stružno-rezalni stroj - Okuma OSP P200L - Leto izdelave: 2008 - Čas rezanja: 10.500 h - Rezkalno vreteno H1: 6000 obr/min - Glavno vreteno: 3800 obr/min, Rota NC 315-86 Dksdpfx Apeyg Rf Nslol - Protipokončno vreteno: 5000 obr/min - ATC 60 Sistem HSKA-63 (60 orodij) - Zelo dobra geometrija - Marposs senzor orodja

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, hitrost vretena (min.): 25 obr/min, največja hitrost vretena: 5.000 obr/min, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Okuma Multus B300-W 6-osni stružno-rezkalni stroj - Okuma OSP P200L - Letnik 2008 - Čas rezanja: 13.900 h - Rezkalna vretena H1: 6.000 obr/min - Glavna vretena: 3.800 obr/min - Proti vreteno: 5.000 obr/min Dkodpfxeyiu Dbs Aplsl - ATC 60 sistem HSKA-63 (60 orodij) - Zelo dobra geometrija - Marpos senzor orodij - Transporter za odrezke in hladilni sistem z majhnim trakovnim filtrom - Opcijsko veliko dodatne opreme za orodja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 580 mm, pomik osi Y: 80 mm, pomik po osi Z: 935 mm, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP-P200L, število osi: 5, This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turning-milling center with a bed overhang of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, tool changer, and a tool magazine for 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking for a high-quality turning machine, you should consider the Okuma Multus B300-W we have for sale. Contact us for more information. • ATC / tool magazine: 40 positions • Tool changer • Maximum distance between chucks: 900 mm • Maximum turning diameter: 450 mm • Sub spindle: A2-6 nose; 38–5000 rpm • Indexing: C-axis 0.001°; B-axis 0.001° Additional equipment Dodpjx D Rvhefx Apljkl • Bar loader IF • Approximately 60 HSK 63 tool holders • Half a pallet of soft and hardened chuck jaws • 3 spindle stops (various lengths) • Various collets

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.500 mm, premer struženja: 710 mm, Rabljena Okuma Multus B400W Največji premer struženja: Ø 710 mm Dolžina struženja: 1500 mm Kuka robot, 140 kg brez manipulacijskega pribora 2 vretena, 7 osi, podajalni trak - polnilna postaja - izpraznilna postaja - 950 mm obratni premer Vpenjalni glavi 12" + 15" Visokotlačna črpalka 70 barov Dsdoyrf T Sjpfx Aplokl

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 900 mm, premer struženja: 450 mm, Rabljen CNC stružni stroj Okuma Multus B300-W multitasking, vključno z novejšim robotom Kuka 70 kg (star 1-2 leti) brez nastavitve za rokovanje. Dedpfjyux S Hjx Apljkl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, CNC stružno-rezkalni center Okuma Multus B400II-W 2000 Krmilnik: OSP-P 300S Letnik: 2013 X-os: 690 mm Y-os s hodom: 230 mm Z-os: 2.045 mm B-os: do 225°, pozicioniranje v 0,001° Dolžina struženja: 2.000 mm Premer struženja: 710 mm Vrtina vretena: 110 mm Vpenjanje orodja: HSK 63 Dkedjyk Tv Ejpfx Aplel Orodni magazin: 80-kratni Oprema: - Sistem za preprečevanje trkov - Sistem za nadzor orodij - Naprava za merjenje orodij - Nastavljanje orodij - Proti vreteno s funkcijo konjička - Merilna tipala Renishaw - Avtomatika vrat - NC nosilec lunete z luneto SMW SLU-Z 3.2 - ONE touch IGF - Transportni trak s tečaji - Glavno vreteno zamenjano leta 2022

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Dear Sir or Madam, Here are the details of the Okuma Multus B400 featuring main and sub spindle, HSK 63 tool magazine with 80 positions, 1500 mm turning length, main spindle bore 100 mm. Dedpfx Apotdg Evolokl CNC turning and milling center with OKUMA OSP P200L CNC control. - Upgraded main spindle Ø110 mm, Ø150/110 mm, spindle nose size 11, speed range 38–2800 rpm - Sub spindle as W-axis incl. hollow clamping device with Ø70 mm bore in the draw tube - Screw thread interpolation, also for thread milling - Tool height compensation in Y-axis for turning tools - Extension kit “M” OSP P200L (Kit One-Touch IGF-M-D) - Multi-function tool software for special tool use - 80-position tool changer instead of 20 positions - Software for C-axis synchronization to simultaneously control both C-axes - Increased speed 10,000 rpm for driven tools, 20/14 kW, max. 85 Nm - Interlit ISF 540/6670 hinged belt chip conveyor with integrated coolant tank - Interlit SPB4 gravity band filter with 900 L clean tank - TH 90/690 FSI frequency-controlled supply pump for SPB 4 gravity band filter - Hand rinsing pistol for attachment to additional coolant tank SPB4 - SMW VNK 250/110 power chuck cylinder for hollow spindle with Ø110.5 mm bore, Rota THW Plus 315-104 A11 chuck, SMW VNK 250/110 cylinder - 2-stage clamping pressure for the power clamping device, selectable via program - Door automation for Multus B400: open/close via M-code, two doors, both open simultaneously - Rota THW Plus 315-104 A8 chuck, SMW VNK 225/95 cylinder mounted Year of manufacture: 2011 Commissioned: June 2011 Warranty: No warranty is provided for the used machine. HAF Präzisionstechnik, however, assures that no defects, including hidden defects, are known. Unknown defects cannot be excluded. The machine is powered up and in very good condition. Inspection possible by appointment. We are also happy to process your acceptance parts in advance.

Stanje: pripravljen za uporabo (rabljen), Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. An on-site inspection is possible. Sale of individual machines is possible. Dkedpfxowmdv Nj Apljl

Stanje: pripravljen za uporabo (rabljen), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-019D, serial number as per photo, used, normal signs of wear, 100% functional Dodpfx Apei Eca Ielekl

Stanje: pripravljen za uporabo (rabljen), Okuma SDU-600.W spindle drive unit, model 1A, E04809-045-071, serial number as per photo, used, normal signs of use, 100% functional. Dkjdpji Eca Sjfx Aplsl

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 2 MAIN SPINDLE - Spindle nose: A2-6" - Spindle drive power: 11 kW - Spindle speed: 50-6,000 rpm - Max. bar diameter: 60 mm - Max. machining diameter: 430 mm - Max. diameter over bed: 580 mm - Minimum C-axis resolution: 0.001° TURRET - Number of positions: 12 - Z-axis travel: 390 mm - X-axis travel: 260 mm - Tool type: V12 ELECTRICAL SUPPLY - Supply voltage: 380 V Dkedpfoxz Hrgsx Aplol - Total connected load: 38 kVA WEIGHT AND DIMENSIONS - Footprint: 2,200 x 1,734 mm - Machine height: 1,839 mm - Machine weight: 3,400 kg MACHINE HOURS - Power-on hours: 23,682 h - Operating hours: 11,795 h - Spindle hours: 7,225 h ACCESSORIES - Control unit: OKUMA OSP-P200 LA - Interface: Ethernet / RS232 / USB - Teach-in programming: Advanced One Touch IGF-L V302A - 3-color status lamp - Coolant tank - Chip conveyor: Droite MAYFRAN - Tool measuring system: manual - Parts catcher - Bar feeder: FMB 5-55 /3200 - Electrical transformer - Collet chuck: Nann KSF 40/6 - 6000 rpm - Collet chuck: TYPE 173E/48F, max bar diameter 42 mm

Stanje: rabljeno, null D: 950, Š: 550, V: 600 (mm). Izdelek: Jekleni zaboji za zlaganje. Tip: Fiksna konstrukcija. Izvedba: s štirimi zaprtimi stenami. Prodajna enota: na kos. Dsdpox Aht Uefx Aplokl Material: jeklo. Stene: profilirana jeklena pločevina. Dno: profilirana jeklena pločevina. Euronorm (mm): ni. Barva: različne.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 710 mm, premer struženja: 710 mm, moč vretenovega motorja: 11.000 W, hitrost vretena (min.): 38 obr/min, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 690 mm, pomik osi Y: 115 mm, pomik po osi Z: 1.545 mm, hitro pomikanje X-os: 4 m/min, hitri pomik os Y: 26 m/min, hitri pomik na osi Z: 40 m/min, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: trifazni, nos vretena: JIS A2-8, skupna masa: 14.000 kg, dolžina orodja: 300 mm, teža orodja: 10 g, pomik osi W: 1.550 mm, Oprema: dokumentacija / priročnik, Obdelovalni center z vrtalno-rezkalno funkcijo OKUMA Multus B400 TEHNIČNE ZNAČILNOSTI: Djdpfx Apsyqx Rzslekl CNC krmilnik: OSP-P200L Razdalja med konicama: 1500 mm Maks. premer obdelave: 710 mm Višina osi nad suportom: 710 mm Pomik osi X: 690 mm Pomik osi Y: -115 / +115 mm Pomik osi Z: 1545 mm Pomik osi W: 1550 mm Natančnost pozicioniranja osi B: 0,001° Največja hitrost rezkalne glave: 6000 min⁻¹ Največja moč rezkalnega vretena: 11 kW Največji navor rezkalnega vretena: 65,7 Nm Rezkalna glava – vpenjalo: HSK-A63 Kapaciteta orodjarnika: 40 Največja dolžina orodja: 300 mm Največji premer orodja: 130 mm Največja teža enega orodja: 10 kg Hitri pomik na osi X: 4.000 mm/min Hitri pomik na osi Z: 40.000 mm/min Hitri pomik na osi Y: 26.000 mm/min Hitri pomik na osi W: 12.000 mm/min Vreteno – čelna prirobnica: JIS A2-8 Min. hitrost vretena: 38 min⁻¹ Maks. hitrost vretena: 3.800 min⁻¹ Korak osi C: 0,001° Napajalna napetost: 400 V Teža: 14.000 kg PRILOŽENA OPREMA: 1 × programska oprema One-Touch IGF 1 × dvotočkovni lunetni naslon ATLING, tip AX8I-NAOS (Ø85–360 mm) 1 × triodprti vpenjalni tulec SMW AUTOBLOK, Ø340 mm, KNCS-N-340-117 1 × regulator vpenjalnega tlaka za vpenjalno glavo 1 × izmetalec obdelovancev 1 × NC konjiček 1 × merilna sonda MARPOSS T18 1 × daljinski elektronski ročni volan 40 × vpenjalnih držal za orodje HSK-63 1 × dvobarvna signalna opozorilna luč 1 × transporter za odrezke 1 × rezervoar za hladilno tekočino 1 × transformator 1 × komplet navodil + OKUMA CD Stroj je možno videti v delovanju v našem obratu po predhodnem dogovoru. Cena po dogovoru, nakladanje na tovornjak vključeno. Možna dobava po celem svetu. Podatki na tej strani so zbrani po najboljših močeh, vendar za točnost ne moremo jamčiti. Stroj primerljiv s proizvajalci kot so Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron in Biglia. Prav tako na voljo CNC stružnice, obdelovalno-rezkalni centri ter rezkalni stroji.