Okroglo Krivljenje, Upogibnik Plošč 3000X27 nakup rabljenega (7.267)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Valjarna za pločevino, kapaciteta 3000 mm, H. Vuillot 3000 mm, rabljeni stroj Kodowcqpnopfx Afvsdl Proizvajalec: H. Vuillot Kapaciteta pločevine: 3000 x 27 mm Premer zgornjega valja: Ø445 mm Premer spodnjih valjev: Ø330 mm Leto izdelave: 1972

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €28,450 Leasing rate: €543.40 Bending length: 1,550 mm Max. bending capacity – construction steel: 7 mm Max. sheet thickness without pre-bending at D=5x top roller: 7 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=5x top roller: 4.5 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 3.5 mm Top roller diameter: 150 mm Bottom roller diameter: 150 mm Side roller diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3,750 mm Width: 960 mm Height: 1,100 mm Weight: 2,500 kg 4 rollers Kdjdpfjyb Szhex Afvjl Top roller driven by hydraulic motor and planetary gearbox, lower rollers driven by gear and cardan shaft Hydraulic adjustment of lower and side rollers Digital display for lower and side roller positions Hardened rollers Cone bending device Hydraulic release of top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE directive OPTIONS: (Delivery time with options approx. 10 weeks) Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Maximum sheet thickness is 50% of rated capacity Cone length must be max. 30% or more than 60% of roller length Hardened rollers are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Ksdpjypbqujfx Afvodl Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Kedpfx Aeypbqnsfvjdl Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Kdjdpfx Afjypbqhevel Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Kdedpfxoypbqbj Afvel Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Kodpfx Aeypbp Rjfvjdl Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Kodjypbp Depfx Afvodl Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roll diameter: 320 mm Center roll diameter: 320 mm Side roll diameter: 240 mm Hardened rolls Conical bending device via inclined positioning of both side rolls Mobile control panel with digital display Motor power: 11 kW CE marking Dimensions (L x W x H): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 t The seller is not liable for typing or data transmission errors. The machine's visual appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty. Kedpfx Asv Htnisfvjdl

Stanje: novo, Leto izdelave: 2025, premer spodnjega valja: 95 mm, premer zgornjega valja: 95 mm, premer stranskega valja: 95 mm, dolžina valja: 1.070 mm, najv. debelina jeklene pločevine: 3 mm, Oprema: dokumentacija / priročnik, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, - Capacity 1070 x 3 mm - Conical rolling - Swing-out top roller - Foot pedal control - Braked motor - Emergency stop - Documentation Kdsdpfx Ajwhgm Tefvel - 400V

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), Technical specifications: Working width: 3550 mm Max. bending capacity: 42.0 mm Kjdpfjittzfjx Afvsdl Max. prebending: 35.0 mm CNC control system Upper roller diameter: 480 mm Second upper roller diameter: 540 mm Diameter of lateral side rollers: 480 mm Diameter of central lower roller: 480 mm Conical bending device by angular adjustment of both side rollers Mobile control panel with digital display Hydraulic drop end bearing Net weight: approx. 44 tonnes Additional equipment: Lateral bending aid Swing-away upper bending aid Additional upper roller The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technology, and wear are consistent with its age; used machines are sold without any guarantee.

Stanje: dober (rabljeno), Technical Data: Working length: 2100 mm Maximum bending capacity: 10.0 mm Pre-bending: 8.0 mm Kodewchn Uepfx Afvodl Top roll diameter: 200 mm Bottom roll diameter: 180 mm Number of driven rolls: 3 Hydraulic drop-end bearing Cone bending device Extended rolls for section bending Control panel with digital display Motor power: 5.5 kW CE marking Dimensions (L x W x H): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several sets of rolls for pipe and section rolling The seller is not liable for typographical or data transmission errors. The machine is in visual and technical condition, and wear consistent with its age; used machines are sold without any warranty.

Stanje: zelo dobro (rabljeno), Tehnični podatki: Delovna širina: 3100 mm najv. zmogljivost upogibanja: 16,0 mm najv. pred-upogib: 12,0 mm Premer zgornjega valja: 300 mm Premer stranskih valjev: 270 mm vsi trije valji poganjani kaljeni valji konusna upogibna oprema z nagibom obeh stranskih valjev vrtljiva upravljalna plošča z digitalnim prikazom hidravlični zložljivi ležaji Kdedpexyvx Tjfx Afvsl moč motorja: 7,5 kW Dimenzije (dolžina x širina x višina): cca 5800 x 1700 x 1500 mm Lastna teža: cca 8,5 ton Prodajalec ne prevzema odgovornosti za napake pri pisanju ali prenosu podatkov. Stroj je po videzu, tehniki in obrabi primeren starosti; rabljeni stroji se prodajajo brez kakršnegakoli jamstva.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Tehnični podatki: Delovna širina: 2600 mm Zmogljivost upogibanja: 20,0 mm Pred-upogib: 16,0 mm Premer zgornjega valja: 330 mm Premer srednjega valja: 300 mm Premer stranskih valjev: 240 mm Stožčasta naprava za upogibanje z nagibom obeh stranskih valjev Premična upravljalna konzola z digitalnim prikazom Moč motorja: 11 kW Kdedpfjx Ii Hvjx Afvjl Oznaka CE Dimenzije (dolžina x širina x višina): pribl. 5800 x 2300 x 1900 mm Teža: pribl. 11 t Dodatna oprema: Zgornja pomoč pri upogibanju Prodajalec ne odgovarja za morebitne napake pri pisanju ali prenosu podatkov. Stroj je po videzu, tehniki in obrabi primeren svoji starosti; rabljeni stroji se prodajajo brez kakršnegakoli jamstva.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Tehnični podatki: Delovna širina: 6500 mm maks. zmogljivost upogibanja: 7,0 mm maks. pred-upogib: 5,0 mm CNC krmiljenje Premer zgornjega valja: 420 mm Premer stranskih valjev: 315 mm Premer srednjega spodnjega valja: 400 mm Stožčasta upogibna naprava z nagnjenim položajem obeh stranskih valjev Premični upravljalni pult z digitalnim prikazom Hidravlični odmični ležaji CE oznaka Moč motorja: 22 kW Mere (dolžina x širina x višina): pribl. 9200 x 2350 x 1900 mm Lastna teža: pribl. 39 ton Dodatna oprema: Stranski upogibni pomočnik Zgornji vrtljivi upogibni pomočnik Stanje: Kdjdpjx Iitijfx Afvsl Zelo dobro ohranjeno, malo rabljeno Delovne ure: 100 h Prodajalec ne odgovarja za napake pri pisanju ali prenosu podatkov. Stroj je po videzu, tehnologiji in obrabi ustrezen starosti; rabljeni stroji se prodajajo brez kakršnegakoli jamstva.

Stanje: generalkompletno obnovljen (rabljeno), BIEGERUNDWALZMASCHINE ROUNDO BLECHLÄNGE: 2500 mm BLECHDICKE: 30/25 mm 3 WALZEN Kdsdpfxohx N Uko Afvsl GEWICHT: 19.000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping grippers: 8 pcs. Saw carriage height adjustment on THK guides Pressure beam with slots (through-feed) Side alignment device Pneumatic quick-change saw blade system Extraction connection diameter: 1 x 120 mm & 1 x 150 mm Installation dimensions (L x W): 5700 x 6000 mm Weight: approx. 2,500 kg INVERTER NEW Note on used machines: • Technical data may be subject to errors and prior sale. Kdsdshvan Ijpfx Afvjl • All prices are ex-works, free loaded onto truck! • The machines have been cleaned and tested for functionality. • All machines are sold as viewed, with no warranty or guarantee. The buyer has the opportunity to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: rabljeno, 260 linear meters of Meta pallet racking Used equipment in very good condition, see pictures. Height: 4.4 m Depth: 110 cm, galvanized Bay load: 7,000 kg Beam length: 2.7 m, orange Beam load capacity: 3,000 kg per shelf Kodsv Rw S Tjpfx Afvodl The offer consists of: + 94 pre-assembled frames, depth 110 cm, height 4.4 m + 372 beams, length 2.7 m, 3,000 kg load per shelf + 744 safety pins + 376 concrete anchors Negotiable price: €16,500 net ex stock Item no.: P10279 Used corner protectors available immediately, surcharge per piece €15 net! Further accessories such as shim plates, mesh shelves, etc. available on request. Load capacity labels, documents, etc. are included as standard. Goods are in stock. Transport and installation possible on request. Inspection possible at any time by appointment. Further information available on request. Always over 5,000 linear meters of pallet racks from various manufacturers in stock. (Technical data, specifications and prices subject to change and prior sale! See our terms and conditions. All prices exclude VAT ex stock.)

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 5801, Stroj za vrtanje in rezanje pločevine FDB 600, Stroj za obdelavo pločevine Peddinghaus FDB 600 iz serije Peddimat je primeren za avtomatizirano vrtanje in avtogeno rezanje ravnega jekla in jeklenih plošč v jekleni konstrukciji. CNC krmiljenje: SIEMENS SINUMERIC Premer vrtanja: min. Ø 8 mm, maks. Ø 40 mm, notranji hladilni sistem za vrtanje Število vrtalnih agregatov: 3 kosi Rezkalni sistem: Avtogena oprema za rezanje Skupna priključna moč: 30 kW Največja višina obdelovanca: 600 x 50 x 6000 mm Minimalna velikost materiala: 80 x 8 mm Debelina pločevine – min.: 6 mm Kdjdsibq Itepfx Afvel Debelina pločevine – maks.: 50 mm Dimenzije stroja pribl.: 2,4 x 2,4 x 2,8 m Dovodni valjčni transporter: 6 m Izhodni valjčni transporter: 1 m Teža stroja pribl.: 6,5 t

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Stroj za ravnanje pločevine, 2100 mm, Ravnanje pločevine, Stroj za ravnanje plošč 2100 mm Rabljeni stroj Maksimalna širina pločevine: 2100 mm (2100x8 mm) Maksimalna debelina pločevine: 10 mm (1500x10 mm) Število valjev: 11 kos Premer valja: 95 mm Električni motor: nastavljiva hitrost in smer Kedpfx Aev Tpv Nsfvsdl Električni podatki: 400 V, 50 Hz, 36 A, 22,5 kW Vključen transportni valjčni trak.

Stanje: novo, Shaft diameter: 120 mm Roller diameter: 390 mm Motor power: 15 kW Kdjdpfxoy Hymqo Afvjl Length: 2000 mm Width: 1650 mm Height: 1900 mm Approx. weight: 4450 kg Standard features • Steel construction • 3 rolls driven by hydromotor and planetary gearbox • Horizontal and vertical operating positions • Mobile control panel • Hardened standard rolls • Hardened and ground shafts made of high-strength special steel • Digital read-outs (2 units) • 3-axis hydraulic lateral guide rolls • Two-speed operating system • Hydraulic components: Duplomatic (Italy) • Electrical equipment: Siemens (Germany) or Telemecanique (France) • Manufactured in accordance with EC safety regulations (CE marking) and ISO 9000 certification • Operating manual in English Options: NC unit with 7" screen: EUR 7,500 Capacity table: No | Profile Type | Size (mm) | Max (mm) | Min. (mm) | Rolls Type 1 | 125x25 | 1200 | Standard Rolls 2 | 200x50 | 1000 | Standard Rolls 3 | 65x65 | 750 | Standard Rolls 4 | Ø80 | 850 | Optional Rolls 5 | Ø5”x6.35 | 1500 | Optional Rolls 6 | Ø160x4 | 2800 | Optional Rolls 7 | 120x40x4 | 1800 | Optional Rolls 8 | 90x5 | 1800 | Optional Rolls 9 | 120x120x12 | 1200 | Optional Rolls 10 | 100x100x10 | 1200 | Optional Rolls 11 | 100x11 | 800 | Standard Rolls 12 | 100x11 | 1000 | Standard Rolls 13 | 100x11 | 800 | Optional Rolls 14 | UPN 220 | 1000 | Standard Rolls* 15 | UPN 220 | 1200 | Standard Rolls* 16 | IPN 220 | 1000 | Standard Rolls* 17 | HEB 120 / HEA 140 | 1200 | 1200 | Standard Rolls* 18 | UPN 120 | 10000 | Optional Rolls 19 | IPN 160 | 5000 | Optional Rolls 20 | HEB 100 / HEA 120 | 1600 | 4000 | Optional Rolls *Some rows indicate capacities for both max. and min. radii with different profile types. Optional rolls may be required for certain profile forms or dimensions.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, NEU – Automatisches Biegezentrum der PBE-Serie | 5 Modelle verfügbar | Sofort ab Lager lieferbar Zustand: Neu, Baujahr: 2025, Funktionalität: voll funktionsfähig TECHNISCHE DATEN: Max. Biegelänge: 1.000 mm (PBE-1000) – 3.000 mm (PBE-3000) | Sonderanfertigungen möglich Max. Biegebreite: 1.000 mm (PBE-1000) – 1.400 mm (PBE-1400) | Sonderanfertigungen möglich Max. Biegehöhe: 170 mm (alle Modelle) | Mind. 110 mm für t-1mm auf Anfrage Vierseitige Mindestgröße: 110 mm (PBE-1000) / 200 mm (PBE-1400 bis PBE-3000) Einseitige Mindestgröße: 100 mm (PBE-1000) / 170 mm (größere Modelle) | Umlegen: 130–180 mm Biegewinkel: ±0–180° (alle Modelle) Kdedpfxoymcvts Afvjl Min. Blechdicke: 0,35 mm MAX. HALTEKRAFT (Standard / Heavy): PBE-3000: 115 t / 155 t PBE-2500: 80 t / 115 t PBE-2000: 38 t / 53 t PBE-1400: 28 t / 38 t PBE-1000: 20 t MAX. MATERIALSTÄRKE (Standard / Heavy): Material PBE-3000 PBE-2500 PBE-2000 PBE-1400 PBE-1000 Edelstahl (SS) 1,2 / 1,5 mm 1,2 / 1,5 mm 1,2 / 1,5 mm 1,2 / 1,5 mm 1,2 mm Aluminium (AL) 2 / 3 mm 2 / 3 mm 2 / 3 mm 2 / 3 mm 2 mm Baustahl (MS) 1,5 / 2 mm 1,5 / 2 mm 1,5 / 2 mm 1,5 / 2 mm 1,5 mm Stromversorgung: 380V 50/60Hz (Transformator optional erhältlich) MASCHINENMERKMALE: Automatisches Mehrseitenbiegen – kein Werkzeugwechsel erforderlich Universelles Biegewerkzeug passt sich automatisch an die programmierten Maße an Positives und negatives Biegen in einem Arbeitsgang: Radien, Umkantungen, kombinierte Winkel Biegegeschwindigkeit 0,2 s/Biegung – 3× schneller als herkömmliche CNC-Abkantpressen Intelligentes CNC-Steuersystem für konstante, wiederholbare Ergebnisse Positionierung erfolgt einmal zu Beginn – Scherspiel wird an der ersten Biegekante ausgeglichen Mehrere Positionier-Referenzpunkte je nach Werkstückform wählbar Energiesparendes Design – reduziert Personal- und Werkzeugkosten TYPISCHE ANWENDUNGEN: Brandschutztüren, Aufzugspanels, Computergehäuse und -schränke, Möbel, Einbauküchen, Klimatechnik-Verkleidungen, Gewerbekühlgeräte, Beleuchtung, Regalsysteme, Decken, Luftreiniger IM SERVICE ENTHALTEN: 12 Monate Garantie Ersatzteilverfügbarkeit Technischer Support und Inbetriebnahmehilfe CE-Dokumentation auf Anfrage erhältlich Verkauf durch HawkTech s.r.o. – Zertifizierter Fachhändler für Industriemaschinen, Tschechische Republik. Lieferung nach CZ, SK und EU. Preis auf Anfrage.

Stanje: rabljeno, številka stroja/vozila: 008597, Pozicija 1: Krožna žaga za plošče z avtomatskim podajanjem SCHELLING-VS 12 - FH6 - FH4 Kdsdpfoy Stvpjx Afvel Pozicija 2: Krožna žaga za plošče – podajanje spredaj SCHELLING-VS 12 - FH6 - FH4 Pozicija 3: Avtomatizirano skladišče SCHELLING-VS 12 - FH6 - FH4

Stanje: rabljeno, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary Table with SIEMENS Control Machine No. P 81 – 5458 Year of manufacture: 1982 / 2009 Maximum rivet shank diameter: 12 mm Tool shank diameter: 16 mm Throat depth: 190 mm Rivet head stroke per riveting unit: approx. 60 mm Rivet spindle speed: approx. 1400 rpm Maximum installation height (tool to counter-tool): 80 mm Compressed air requirement: 6 bar Motor output per riveting unit: 1.1 kW Electrical connection: 380 Volt, 50 Hz - Rotary indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit adjustable in the machine frame relative to the rotary table Kdjdpfx Afedzp T Nsvjl - Table size: Ø 295 mm for mounting round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with leadscrew, positioning via adjustable microswitch - Modernized control and conversion to servo drive on the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel – built 2009 - Riveting time infinitely programmable - Riveting pressure continuously adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space requirement (L x W x H): 3200 x 1250 x 2400 mm Weight: approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. Segments were manually positioned onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically indexes to the next working position. Ideal for saw blade manufacturers and repair shops. Also suitable as a basis for building a special-purpose machine.

Stanje: rabljeno, Leto izdelave: 2021, Condition: used Year of manufacture: 2021 Stock number: 9502 Country of origin: Turkey Price: €2,100 In stock: 1 Bending length: 1050 mm Max. bending capacity (mild steel): 2 mm Top roller diameter: 75 mm Length: 1930 mm Width: 700 mm Height: 1160 mm Weight: 300 kg LIKE NEW CONDITION 3 rollers Kodswiquqepfx Afvsdl Asymmetric roller arrangement with pre-bending Wire grooves on bottom and rear rollers Lower roller adjustment by central lever - with gear drive Base frame Operating manual in GERMAN or ENGLISH