Novexx Solutions Als 206 (2012) nakup rabljenega (8.377)

Stanje: rabljeno, Leto izdelave: 2012, Overview This labelling machine, model: Novexx Solutions ALS 206, was built in 2012 and was used for carton labelling. With this solution, labels with a width of 10 - 156 mm (material width including liner max. 160 mm) are applied to the side of products. The surface of the product must be flat to ensure uniform label application. Both paper and rigid PE label materials can be used. The maximum dispensing speed is 30 m/min. The stand with vertically and horizontally adjustable spindle allows for flexible integration into a conveyor belt system. The product sensor must be connected to the M12 connector of the ALS. Upper labelling unit and lower labelling unit with infeed and outfeed conveyor. Upper unit model ALS 206, lower unit ALX 924/5. Can be delivered with computer and labelling machine for carton labelling. Including stand. The Subway label applicator was new 2 years ago. It is an elevated device. Technical details Dispensing speed: up to 30 m/min Material width incl. liner: 10 - 160 mm Label length: 5 - 600 mm Label roll diameter: up to 300 mm Gedpfx Afjvrfh Eowoub Data interfaces: RS 232C, Ethernet, USB Scope of delivery Upper labelling machine | Novexx Solutions | ALS 206 | 2012 Lower labelling machine | Novexx Solutions | ALX 924/5 | 2022

Stanje: rabljeno, Leto izdelave: 2019, Proizvajalec: Novexx Solutions Model: TE 204 Leto: 2019 Tip: Naprava za nanašanje varnostnih etiket (tamper-evident) Tip obdelovanih izdelkov: Karton Glava za etiketiranje: ALS204 Hitrost doziranja: maks. 40 m/min Širina etikete: 10 - 110 mm Dolžina etikete: 5 do 600 mm Napajalna napetost: 220V Gsdpfx Ajygndijfweub Moč motorja: 2,5 kW Tehnična dokumentacija Dimenzije: 2363 x 1455 x 1420 mm

Leto izdelave: 2022, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SPE-Spero-LTX-340, Naprava je bila uporabljena za raziskovalne namene, SPE-Spero-LTX-340, MIR-mikroskop s funkcijo »Hyper Spectral Imaging« (spekter 1900 do 950 1/cm). Izboljšano LowMag lečo 4,0X; NA:0,3, 2,0 mm vidno polje. Ekskluzivno IR-transmisijsko delovanje. Širokopasovna mikrobolometerska kamera 480*480 pikslov. Vključuje visoko natančno avtomatizirano mizico (< 1 μm ponovljivost) in hitro zbiranje podatkov, joystick, nadzorni računalnik, Win10. „Discrete Frequency IR-Imaging“ v realnem času. 2000 ur/1 leto garancije. SPE-Spero-LT-EXT-WAR-12-2000. Nova cena: 240.102 evrov. Prodaja brez garancije, kot je vidno. Gedpoyxc Twjfx Afwoub

Leto izdelave: 2022, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SPE-Spero QTX-340, Naprava je bila uporabljena za raziskovalne namene, SPE-Spero QTX-340, MIR-mikroskop s funkcijo „Hyper Spectral Imaging“. Spektralna pokritost področja prstnih odtisov (1900 - 950 1/cm). High-Res-IR objektiv: 12,5X; NA:0,7, 650μm FOV. Enhanced LowMag-Lens Za vidno svetlobo: 4,0X; NA:0,13, 650μm FOV. 480*480 slikovnih pik, širokopasovna mikrobolometerska kamera. Kamera za vidno svetlobo. QT-Laser-Performance-Paket vključno z visoko natančnim avtomatiziranim odrom (< 1μm ponovljivost natančnosti). Hitro zajemanje podatkov. Joy Stick, kontrolni računalnik, Win10. »Diskretna frekvenčna IR-slikovna« v realnem času. Delovanje v transmisiji in refleksiji. 4000 ur aktivnega laserja. Gsdpfx Afjy Dcd Howjub

Stanje: rabljeno, Extraction system, central extraction unit, ambient air filtration system ETS Efficient Technical Solutions GmbH Central welding fume extraction Year of manufacture: approx. 2005 Airflow volume: approx. 5000 m³/h Extraction inlet at filter: 1200 x 150 mm Exhaust outlet at filter: 400 x 300 mm Motor power: 10 kW Power supply: 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance hatch for filter replacement - Radial fan mounted on top of the unit Required space (L x W x H): 2000 x 1650 x 3650 mm Transport height without fan: 3100 mm Weight: approx. 2000 kg Very good condition Godpfxsicic Hs Afwsub

Stanje: dober (rabljeno), vrsta goriva: dizel, Leto izdelave: 2012, Hamm HD 10 VV Valjar / Cestni valjar / Tandem valjar 2012 Kubota Diesel Video lahko pošljemo preko WhatsAppa. Stalna zaloga, glejte spletno stran. Cene so EXW Nuland. Gujdpfsywyigex Afwsb Podjetje Van de Wert Trading B.V. ima spreminjajočo se zalogo strojev, tovornjakov, prikolic in priključkov. Vse naše dobave so po trgovinskih cenah, v stanju AS-IS, brez garancije. (glejte naše splošne pogoje) Za ogled ali testno vožnjo lahko prosto rezervirate termin. Prosimo, pokličite vnaprej, ker nismo vedno prisotni na lokaciji. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Stanje: dober (rabljeno), Leto izdelave: 2012, TruBend 5050. Gjdpfey Shcdsx Afweub

Stanje: novo, Leto izdelave: 2024, NOV stroj, nikoli uporabljen!!! DN SOLUTIONS PUMA 5100LMB Leto izdelave 2024 Os C z gnanim orodjem Upravljanje FANUC OiF touch Vpenjalna glava 21 palcev (535mm) Premer vretena 166mm Pomiki: Godpfx Afey H D Ufewoub X-362mm Z-2155mm Maksimalna dolžina struženja 2.002mm Maksimalni premer struženja 650mm Revolver z 12 pozicijami BMT 75 Izmetnik ostružkov Knoll

Stanje: novo, Leto izdelave: 2026, We offer: Pellet machines from WALW-Solutions, featuring unique quality, honest workmanship, and fair pricing. Honest Workmanship: We manufacture our systems ourselves directly in Poland. Only components such as gearboxes and motors are sourced from reputable manufacturers. All other parts are designed and built in-house, allowing us to meet every requirement individually. Fair Pricing: Guedpelt Ugtofx Afweb We manufacture in Poland and are transparent about it. Other competitors who label their products as “Made in Germany” often only assemble them in Germany, while sourcing components mostly from Lithuania. With us, you benefit from the lower production costs, resulting in our offer prices typically being 40% below those of our competitors. These pellet production machines are completely new to the market in this price/performance segment and are unique in Europe! WALW-Solutions machines are available exclusively through us! From systems for processing your in-house sawdust from firewood production or your carpentry operation, to professional production of industrial-scale pellets from wood chips, straw, miscanthus, and more—as well as production of hay or straw cuboids—we can provide you with the right solution! Our systems offer capacities from 150 kg/hour up to 5 tons/hour and are equipped with all necessary components for a fully automated operation. For every type of input material, we find a suitable solution and options to integrate automation into existing systems. All machines and control systems are equipped with components from Siemens, ABB, Schneider Electric, or similar. Please note: for buyers with a valid VAT ID, net purchasing is available! We look forward to your inquiry! If you are interested, please feel free to contact me directly by mobile at: [number]

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, obratovalne ure: 46.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.500 kN, Arburg Golden Edition 470-1500-400 iz leta 2012 V idealnem tehničnem stanju Gsdpfx Aoy Iupiefwsub Vbrizgalna enota: Premer polža: 40 mm Masa vbrizga: 180 g Tlak vbrizga: 2000 bar Razdalja med vpenjalnimi drogovi: 470x470 mm Izmetalec: hidravlični Vpenjalna enota: hidravlična Krmilni sistem: SELOGICA Dodatna oprema: Stroj je v odličnem tehničnem stanju Delovne ure: 46.500 h v samodejnem načinu Izhod za robota Izhod za dozirnik barvila Hidravlično izvlečenje jedra x 1 Ojačane vbrizgalne enote – bimetalne Zrak x1

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 205 mm, pomik po osi Z: 560 mm, moč vretenovega motorja: 15.000 W, skupna višina: 1.693 mm, skupna širina: 1.595 mm, skupna masa: 3.600 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 0i PLUS, največja dolžina izdelka: 2.805 mm, število osi: 3, This 3-axis DN Solutions LYNX 2100LMSA was manufactured in 2022. It offers a maximum turning diameter of 300 mm and a turning length of 510 mm. The machine features a 6-inch chuck, a 12/24-position turret, and a sub-spindle for enhanced capabilities. If you are looking for a high-quality CNC lathe, consider the DN Solutions LYNX 2100LMSA horizontal turning center we have for sale. Please contact us for further details. • Condition: New, 0 operating hours • CNC control: FANUC 0i PLUS with 15" touchscreen Capacity: • Chuck size: 6 inches • Max. turning diameter: 300 mm • Max. turning length: 510 mm Axes / Travels • X-axis rapid traverse: 30 m/min • Z-axis rapid traverse: 36 m/min • Number of linear axes: 2 (X / Z) • C-axis: Spindle positioning for milling and drilling operations Main Spindle • Max. spindle torque: 127 Nm Sub-Spindle: • Sub-spindle: Yes Gjdpfxoy Ex A Ue Afweub • Max. sub-spindle speed: 6,000 rpm Turret: • Turret stations: 12 / 24 • Rotating tool speed: 6,000 rpm Integrated options • Automatic tool changer • High-pressure coolant system: 7 bar Additional equipment • Chip conveyor • Robot interface • Automatic door • Parts catcher with conveyor belt Technical Specification Counter Spindle Yes Driven Tools Yes

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, CNC stružnica Doosan Puma GT2100M, letnik 2022/10. Stanje: nova naprava, razstavni model. Z napravo je priložen izmetalec odrezkov Cromar. Guedpfsy Azraox Afwjb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 7.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Puma 2600, premer struženja nad prečnim suportom: 630 mm, stružna dolžina: 1.245 mm, premer struženja: 376 mm, izvrtina vretena: 102 mm, največja hitrost vretena: 2.800 obr/min, moč vretenovega motorja: 26 W, vrsta vhodnega toka: trifazni, proizvajalec krmilnikov: FANUC, število vreten: 2, delovne ure vretena: 7.800 h, število mest v zalogovniku orodij: 12, Oprema: transportni trak za ostružke, For sale: CNC turning center with sub-spindle and Y-axis. Machine is in excellent condition. Purchased brand-new mid-2023 and still in operation. Less than 8,000 working hours to date, producing parts well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot integration: autodoor and communication signals provided. Equipped with parts conveyor and oil mist filter. NOTE: The robot is not included in the offer—possible sale and implementation support available at separate quotation. TECHNICAL DATA (as per manufacturer's specification): 1) Capacity Swing over bed: 680 mm Swing over carriage: 630 mm Max turning diameter: 376 mm Recommended turning diameter: 315 mm Max turning length: 1245 mm Admissible workpiece weight (incl. chuck): In chuck 500 kg (1,000 kg with support) Bar capacity: Ø102 mm 2) Main Spindle Chuck size: 315 mm Spindle type: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck passage: 103 mm Spindle motor power (cont./30 min): 26/22/18.5 kW (S3 25%/S6 60%/S1 Cont.) Spindle speed range: 2,800 rpm Max spindle torque: 1,123 Nm (15 min S3 15%) Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (option: 210 mm) Spindle type: A2#5 ASA Spindle bore: 62 mm Sub-spindle cylinder clearance: 50 mm (H8) Sub-spindle drive power (cont./30 min): 7.5/5.5 kW (30 min/S1 Cont.) Spindle speed: 4,500 rpm Max torque: 85 Nm (30 min) Power transmission: Belt 4) Axis Travels X-axis: 260 mm Z-axis: 1,350 mm Y-axis: 105 mm (±52.5 mm) B-axis: 1,350 mm C-axis: 360° (0.001° increments) Rapid traverse (X): 30 m/min Rapid traverse (Z): 30 m/min Rapid traverse (Y): 10 m/min Rapid traverse (B): 30 m/min C-axis speed: 200 rpm 5) Bed and Saddle Slant bed, incline angle: 30° Bed guideway width (Z): 437 mm Saddle guideway width (X/Y): 321/325 mm Sub-spindle clearance: 335 mm 6) Tool System Tool holder: BMT 65P Tool stations: 12 Tool size: 25 x 25 mm Max drill diameter: 50/32 mm (main/sub-spindle) Driven tool power: 7.5/1.5 kW (5 min/Cont.) Driven tool speed: 5,000 rpm Driven tool torque: 95.5 Nm Driven tool collets (ER32): Ø3–Ø20 mm (option) Turret indexing: 1 position/0.15 s, 1.2 s full station Gusdpfox Rqkuox Afwsb Max driven tool drilling diameter: Ø20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning (X, Z, Y, C): 0.01 mm Repeatability: X/Z/Y axes: ±0.002/±0.003/±0.003 mm C axis: ±0.006° 10) Other Electrical control X/Z/Y axes: 0.02 mm C axis: 0.0167° For any questions or further information, please send us a message or contact us by phone.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Guodpfxjvf E Avj Afwsb Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 32.169 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.320 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, skupna masa: 22.000 kg, kapaciteta rezervoarja za olje: 900 l, For sale is a complete baling press system consisting of conveying technology, baler (partially overhauled and tested), and wire stations. Technical data (baler): Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main press force: 60 t Pre-press force max.: 25 t Feed chute dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale size: 1,100 x 720 mm, variable length Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates at a bulk density of 30 kg/m³: approx. 5.5 t/h 50 kg/m³: approx. 10 t/h 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg, depending on material PLC: Telemecanique TSX Micro Baler weight: approx. 22 t Scope of supply: 1 chain belt conveyor Guedpsviwdmjfx Afwob 1 Bollegraaf HBC 60A baler with fluffing unit (wirbulator) 1 maintenance platform with access ladder 2 wire stations with guide pulleys for 10 wire reel stands (without wire) The following repair and overhaul work has been carried out: - Hydraulic oil tank drained, cleaned, and refilled with new oil - Oil filter and air filter replaced - Hydraulic block partially resealed - Hydraulic hose at the hydraulic block replaced - Wire run-in marks at the base passages welded and smoothed - Tying unit cleaned and serviced - Electrical system repaired, door interlock switches partially replaced - Fluffing unit repaired - General maintenance carried out, machine lubricated - Machine tested under power, without material, in manual and automatic mode—see function video Remarks: The system has already been completely dismantled, stored, and is ready for prompt loading. Documentation (operating manual, CE, electrical/hydraulic circuit diagrams) is available. Viewing by appointment is possible. We accept no liability for the technical specifications or any errors.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 300 mm, premer struženja: 300 mm, izvrtina vretena: 52 mm, največja hitrost vretena: 4.500 obr/min, model krmilnika: FANUC CNC, TEHNIČNI PODATKI Maks. premer struženja: 300 mm Maks. dolžina struženja: 300 mm Vretenova odprtina: 52 mm Glavna vretena hitrost: 4.500 min⁻¹ Orodjarski revolver: 12 postaj PODATKI O STROJU Teža stroja: 2.200 kg OPREMA Horizontalni CNC stružnica Visoko zmogljivo glavno vreteno Robustna konstrukcija stroja za visoko dimenzijsko natančnost Orodjarski revolver s hitro indeksacijo Guedpjyvfvuofx Afweb Kompaktna zasnova, mala potreba po prostoru Uporabniku prijazna CNC krmiljenje Visoka zanesljivost in nizko vzdrževanje Krmiljenje: FANUC CNC

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, moč vretenovega motorja: 22.000 W, največja hitrost vretena: 3.000 obr/min, potovalna razdalja osi X: 293 mm, pomik osi Y: 130 mm, pomik po osi Z: 1.350 mm, skupna višina: 2.315 mm, skupna širina: 2.067 mm, skupna masa: 8.000 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-F, največja dolžina izdelka: 4.530 mm, število osi: 4, This 4-axis turning and milling center DN SOLUTIONS 3100 LY was manufactured in 2023. It offers a maximum turning diameter of 420 mm and a turning length of 1285 mm. The machine is equipped with a 12-inch main spindle chuck and rapid traverse speeds of 30 m/min on the X and Y axes. If you are looking for a high-quality turning center, consider the DN SOLUTIONS 3100 LY machine we have for sale. Contact us for more details. • Main spindle chuck size: 12 inches (306 mm) • Bar capacity: 102 mm • Rapid traverse: X 30 m/min; Y 30 m/min; Z 10 m/min • Maximum turning diameter: 420 mm • Maximum turning length: 1285 mm • Driven tool speed: 5000 rpm • Tool turret: 12 stations, BMT65 • Guideway type: Box guideways • Axes/Features: C-axis, Y-axis • Electrical: 380 V, 3-phase, 50/60 Hz • Electrical power: 55.02 kVA; full load current 83.60 A; short-circuit power 10 kA; breaking capacity 5 kA Additional Equipment • Optional: • 1 external turning holder BMT65 25x25, single, left/right (500-0679) • 3 external turning toolholders R/L, high (500-6960) • 1 facing turret BMT65P/SQ 25 mm (500-0834) • 3 boring bar holders (ID: 50 mm) BMT65P (500-5555) • 1 coolant cover (500-0837) • 1 reducing bushing set • 1 reducing bushing set (500-0808) • 1 adapter set PRECI-FLEX Er32 (BMT 65P) (500-0500) • 12 covers BMT 65 (500-1931) • 2 angled externally cooled Eppinger AGWs • 2 straight externally cooled Eppinger AGWs • Chip conveyor (hinge belt conveyor). Price on request Gujdpfx Afjyu Rn Teweb • The machine comes with a standard basic package: turret head fully equipped, including base holders The machine is a showroom model, never used in production. Like new. Technical Specification Counter Spindle: No Driven Tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, moč vretenovega motorja: 45.000 W, največja hitrost vretena: 1.500 obr/min, potovalna razdalja osi X: 362 mm, pomik osi Y: 110 mm, pomik po osi Z: 1.105 mm, skupna višina: 2.194 mm, skupna širina: 2.056 mm, Premer palice (maks.): 166 mm, skupna masa: 10.750 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-F Plus iHMI Touch, največja dolžina izdelka: 4.759 mm, število osi: 4, This 4-axis DN SOLUTIONS PUMA 5100 MB was manufactured in 2023. It features a maximum turning diameter of 650 mm and a turning length of 952 mm. The machine is equipped with a 21-inch main spindle chuck and offers rapid traverse speeds of up to 20 m/min. If you are looking for high-quality turning capabilities, consider the DN SOLUTIONS PUMA 5100 MB turn-mill center that we have for sale. Contact us for further details. • Main spindle chuck size: 21 inch (535 mm) • Bar capacity: 166 mm • Rapid traverse X: 16 m/min • Rapid traverse Z: 20 m/min • Max. rapid traverse: 20 m/min • Main spindle torque: 2957 Nm • Maximum turning diameter: 650 mm • Maximum turning length: 952 mm • Driven tools speed: 4000 rpm • Number of tool stations: 12 • Tool interface: BMT75 • Guideway type: box ways • Spindle bore: 117–166 mm (depending on configuration) • Coolant system: high-pressure coolant through the turret • Tailstock: programmable tailstock • Tool measurement: automatic hydraulic tool measurement • Cutting force monitoring: yes • Thread cutting: fixed point threading with variable speed • Additional handwheel: yes • Automatic machine door: yes • Electrical connection: 380 V • Electrical connection: 3 phase Gujdpfxjyuywks Afwob • Frequency: 50 / 60 Hz • Rated power: 61.56 kVA • Full load current: 93.53 A • Short-circuit resistance: 10 kA • Breaking capacity: 5 kA Additional equipment • Optional: • 4 pcs. external clamping jaws (500-0838) • 1 pc. raised external toolholder • 1 pc. facing toolholder R/L • 6 pcs. internal turning toolholder • 1 pc. internal end cap (500-0839) • 1 pc. reduction sleeve set for boring • 1 pc. U-drill reduction sleeve set • 2 angled, externally cooled Eppinger external toolholders • 2 straight, externally cooled Eppinger external toolholders • Optional: chip conveyor (hinged belt conveyor). Price upon request. • The machine comes with a standard base package: turret fully equipped, including basic holders Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vertical form, fill, and seal packaging machine Brand: Jasa Packaging Solutions B.V. Model: PMT Horizontal seal length: 270 mm Film width: 620 mm Gujdpfx Ajv Utd Hjfwsb Overall dimensions: 2800 mm x 1450 mm x 2350 mm.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, skupna širina: 120 mm, skupna dolžina: 220 mm, skupna višina: 245 mm, uporabna prostornina rezervoarja: 3.300 l, Treasure v skladu z Valrem. Ognjevarna zaščita > 120 min Zunanje dimenzije: Dolžina: 220 cm Širina: 120 cm Višina: 245 cm Notranje dimenzije: Dolžina: 170 cm Guodpfx Aoykapfefwjb Širina: 95 cm Višina: 210 cm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, RSS 600 serija Mono Rotor Shredder (nova serija) 18,5 kW Guedpfx Asirt H Aofwsb Velikost sita po dogovoru Primeren za različne vrste plastike/lesa/ali drugih materialov Možne prilagoditve glede motorjev, sita, okvirja. Možna dovodna in odvodna transportna trakova, skladiščenje, ločevanje kovin. Na voljo tudi večji ali manjši modeli. Odvodni trak ali polž po želji. Za vprašanja nas pokličite ali nam pišite, z veseljem vam svetujemo. POMEMBNO! Prosim navedite vaše ime, ime podjetja in telefonsko številko.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, We deliver the machines wherever you require, and can install them upon request in consultation. Optional: Stainless steel discharge unit, stainless steel storage silo, blower, approx. 3 meters of piping. Grinding mill 1000 series 45 kW, 3 x 10 knife set or your preferred 5 x 2 rotor configuration (pictured: heavy duty rotor set and standard 3x2 set) Gjdpjg Ainqofx Afweub 2 x stators screen deck as per your request Product discharge and storage available in various configurations, offered at especially favorable pricing in combination. Motor power can be adjusted. Other customizations can be discussed, such as a rotor modification with more knives, e.g., 5 rows of knives or a heavy-duty version. Delivery by arrangement. Call or email us for consultation or if you have questions—please respond with your name, company name, and a correct phone number. Without this correct information, RSS Recycling Shredders and Solutions cannot respond.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, RSS HD 4-gredni drobilnik Godsh N Dmnspfx Afwoub Serija 800/1000/1200 2x 22 kW (2x 18,5 ali 2x 30 možno) ali po vaših željah. Z hidravličnim sitnim paketom, menjava/čiščenje sita v cca. le 10 minutah. 40 mm noži, ali druge dimenzije možne. 40 ali 50 mm sita plošča. Prilagoditve npr. nožev, motorjev, sit, okvirja so mogoče. Dovodni in odvodni trakovi, skladiščenje, ločevanje kovin možno. Na voljo tudi večji ali manjši modeli. Po želji hitro hidravlično čiščenje ali menjava sistema za sito. Za več informacij ali nasvet nas kontaktirajte. Dobavni pogoji RSS, dobavni rok po dogovoru. Garancija in NL CE certifikat. Možna postavitev/montaža. Možen ogled. Odgovori: Z imenom, imenom podjetja in telefonsko številko.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, obratovalne ure: 4 h, moč: 45 kW (61,18 KM), Dolžina rotorja 1000 mm, moč 45+2,2 kW, Velikost lijaka 1400 x 1000 mm, velikost sita po želji. Na voljo tudi opcijski transportni trak Dostava po dogovoru. Za več informacij: RSS Recycling Shredders & Solutions Gsdpjkzg U Djfx Afwjub Kontakt ali vprašanja z imenom podjetja, POMEMBNO! ime, podjetje in telefonska številka.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Discharge auger system available in any length, diameter, etc., customized to your requirements and needs. Naturally, can also be supplied separately. Gjdst Iwt Uopfx Afwjub Questions or inquiries? Please respond with your full name, company name, and phone number.